ECOSTATIC SYSTEM FITTING PROCEDURE GUIDELINES
ECOSTATIC SYSTEM FITTING PROCEDURE GUIDELINES
ECOSTATIC SYSTEM FITTING PROCEDURE GUIDELINES
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ECOSTATIC</strong> <strong>SYSTEM</strong><strong>FITTING</strong> <strong>PROCEDURE</strong> <strong>GUIDELINES</strong>Apply Loctite to all 6 bolts.Insert the 3 segments inside the tyre and put the wedges and wedge bolts in place to connect the 3segments (4 to 5 threads). You may use a cord (RFI 020) to make it easier to put the last 2 segmentsin place.
Place the tyre around the wheel rim ensuring that the valve is between 2 segments. Lift the top beadof the tyre (ideally with bead spreader RFI 016) whilst keeping the RunFlat in contact with to thebottom bead. Tighten wedge bolts to 30Nm (16”-16.5”) or 80Nm (20”-22.5”). Place the clampingplate and tighten up the clamping bolts. Grease the outside of the RunFlat (approximately 1kg persegment for a 20” system, 500g for 16”).Place the rim seal before completing the fitting of the 2-piece wheel.RunFlat International LimitedGawne Lane, Cradley Heath, West Midlands, B64 5QY United KingdomTelephone : +44 (0) 1384 414845 Fax : +44 (0) 1384 414849e-mail : info@runflatinternational.comWeb Site : www.runflatinternational.com