Modern Materials Handling - April 2011

goodbye to exposed beltsgoodbye to grooved rollershello to ShaftDriveTM !helloConroll’s NEWShaftDrive TMSystemFOCUS ON Racks (continued)To learn moreabout the uniqueShaftDrive TM system,call us at 877-805-4292or visit us on the Web.mmh_conrollQTR.indd 1• Safe, low-voltage 24VDCbrushless motors• Perfect for transport and zeropressure accumulation• Accommodates virtually any rolleror wheel configuration• IP66 rated sanitary washdownversion available• Pre-assembled complete driveelements simplify assembly• Fully assembled conveyor modulesavailable for OEMswww.conroll.com Conroll Corp. | 910-202-4292 | Fax: 910-202-4280SUPPORT8/26/2010 3:25:20 PMat every level.Three models of roller rackfor carton flow picking, storageOffered in three models, a line of carton flow-track and rollerrack units can be configured to form various storage mediumsfor order picking operations. Structures include light duty forshelf storage use, consisting of 1.75-inch square tubing with1,000 pounds capacity per level load in a 6-foot wide bay. Thestandard model is for floor-level order picking and minimaloverhead storage, with 1.625 x 3-inch uprights and 3-inchbox beam for 2,500 pounds capacity in an 8-foot wide bay.For multi-level storage and picking, the heavy duty structureincludes 3 x 3-inch uprights and 1.625 x 4-inch rolled beamwith 4,000 pounds capacity in an 8-foot wide bay. Uprights canbe added to create bays of carton flow or deeper runs. UNEXManufacturing, 800-695-7726, www.unex.com/rollerrack.htm.Cubic Designs makes iteasy to integrate a singleormulti-level platforminto your valuable project.We offer professionalengineering, manufacturing,and installation to supportyou at every level.© 2011 Cubic Designsthe perfect fit855.241.0258 www.cubicdesigns.comCantilevered rack holds up to22,000 poundsIdeal for storage of load capacities up to 22,000 pounds, a fullline of heavy-duty and extra-heavy-duty cantilevered rack maybe equipped with single or doubleuprights. The X-series heavy dutymodel may be specified in sevenheights, from 8 to 20 feet, and withseven arm lengths from 18 to 60 inches.Offered in five heights—from 12to 20 feet—the Double X-series extraheavy-duty model comes with six armlengths from 24 to 60 inches. For safetyand stability, the uprights includeheavy-duty horizontal and x-shapedbracing, with special bracing available.Gray enamel finish is standard, withgalvanized offered as an option. WestPoint Rack, 866-245-3630, www.westpointrack.com.54 A P R I L 2 0 1 1 / MODERN MATERIALS HANDLING mmh.com