Tetratec EX 600 Tetratec EX 700/ Tetratec EX 1200 - Pet-bg.com

1Filling with Filter MediaSet up2Set upSetting the Motor Head to the Filter Case12LiftbucklesRemove the motor head from the filter case of the Tetratec ® EXFilter. To release the motor head, lift the locking buckles with theTetratec ® logo.Release the lift buckles to slightly raise the motor head from thefilter case.Remove the motor head by lifting one of the lift buckles whileholding down the filter case frame.5ConnectionPipeFilter Case O-ringWater intakenozzleLockingBuckleTake care to assemble the parts properly.Ensure that there is no dirt or foreign substanceson the filter case or O-ring of the motor head.Place the motor head on the filter case. Ensure thatthe intake nozzle of the motor head and theconnector pipe of the filter media containers arealigned.Resecure the lift buckles to align the motor headwith the filter case. Then close the locking buckles.Remove the filter media securing plate and filter media containersfrom the filter case.3Assembling the Motor Head Hose Adaptor Unit3Clean all the Filter Media6Central LeverAttach the hose adaptor unit to the motor head with the centrallever raised. (The hose adaptor unit cannot be attached while thecentral lever is down!)Filling with Filter MediaTake out all of the filter media from the filter media containers andrinse them in water. (Take the filter media out of the plastic bagsbefore use.)After rinsing, return to the filter media containers as per theoriginal order. (The placement is shown below.)7After attaching the hose adapter unit to the motor head, push thecentral lever down to the center of the motor head to fix it in place.Für EX 600:Bottom Tray:Second Tray:Third Tray:Tetratec ® CR Ceramic Rings and on top Tetratec ® BF Biological Filter FoamTetratec ® BB Bio Filter BallsTetratec ® BF Biological Filter Foam, then Tetratec ® CF Carbon Filter Medium,then Tetratec ® FF Filter Floss PadFür EX 700 / 1200:Bottom Tray: Tetratec ® CR Ceramic Rings and on top Tetratec ® BF Biological Filter FoamSecond Tray: Tetratec ® BB Bio Filter BallsThird Tray: Tetratec ® BF Biological Filter Medium (2 units)Fourth Tray: Tetratec ® BF Biological Filter Foam, then Tetratec ® CF Carbon Filter Medium(2 units for EX1200), then Tetratec ® FF Filter Floss Pad4Important: Reset all filter media containers and the filter mediasecuring plate so that the “ ” marks on the handle of the containersalign with the “ ” marks on the filter case.48Assembling the Water HosesAttach the valves to the hose adapter unit.Screw the valves onto the hose adaptor unit.ValveHoseadapterunit1718