View Sure-Craft Extended Life Heavy Duty Diesel 50-50 Antifreeze ...

SURE-CRAFT EXTENDED LIFE HEAVY DUTY DIESEL50/50 PREMIXED Antifreeze/CoolantSURE-CRAFT Extended Life Heavy Duty Diesel 50/50 Premixed Antifreeze/Coolant is ahybrid technology product that does not require an initial charge of SCA or coolant extender atinitial fill. This OEM approved product is specially formulated to protect all coolant systemmetals and provides excellent wet sleeve liner cavitation protection. It provides protectionagainst radiator freeze-up down to -37°C and boil over to 129°C (with a 100 kilopascal {15 psi}radiator cap in good condition). It is designed for use in light duty diesel applications where anextended service interval is required. It is recommended for use in on-road truck, off-road, farm,marine and stationary applications including, but not limited to, Caterpillar, Cummins, DetroitDiesel/MTU, GM Heavy Truck, Freightliner, PACCAR and Volvo Mack.This aluminum compatible product, when added as an initial fill and properly maintained inaccordance with engine manufacturer’s maintenance recommendation, will provide an inservicelife of up to 960,000 km, 12,000 hours or 6 years, or whichever comes first.SURE-CRAFT Extended Life Heavy Duty Diesel 50/50 Premixed Antifreeze/Coolant offersthe following advantages:OEM approved; and provides excellent wet sleeve liner cavitation protectionFully formulated; DOES NOT require initial charge of SCALow silicate, phosphate and amine freeExtended service life coolantSURE-CRAFT Extended Life Heavy Duty Diesel 50/50 Premixed Antifreeze/Coolant meetsthe performance requirements of the following coolant specifications:ASTM D3306, D6210Japanese Standard JIS K2234TMC RP 329BDetroit Diesel 7SE298, 93K217CAT EC-1 MTU MTL 5048CID-A-A-52624CumminsTypical Product PropertiesCharacteristic Performance Test MethodpH 7.5 - 8.6 ASTM D1287Specific gravity b 1.075 - 1.090 ASTM D1122Freeze point, °C/°F -37/ -34 ASTM D1177Foam volume, ml 150 max. ASTM D1881Foam break time, second 5 max. ASTM D1881Reserve Alkalinity, ml 3.0 min. ASTM D1121Chloride, ppm 25 max. ASTM D3634Silicon, ppm 250 max. ASTM D6130ColourRedGlycol Content (wgt.%).47 min.Inhibitors and Water Content (wgt.%) 53 max.bMeasured at 15.6ºC/60ºFCreated on 3-Aug-11Page 1 of 2

SURE-CRAFT EXTENDED LIFE HEAVY DUTY DIESEL50/50 PREMIXED Antifreeze/CoolantTypical Coolant Performance Testing ResultsMetal TypeASTM D 1384GLASSWARE CORROSIONASTM D 2570SIMULATED SERVICETest Results¹ Max. Spec. Test Results¹ Max. Spec.Copper 2 10 8 20Solder 4 30 4 60Brass 1 10 7 20Steel 0 10 1 20Cast Iron -1 10 9 20Aluminum 0 30 0 60¹ Weight loss, except negative sign which indicate weight gain, per coupon in milligrams. Values are for coolant made from virginethylene glycol.Test Results¹SpecificationASTM D4340 Heat Rejecting Aluminum Corrosion(mg/cm²/week)ASTM D2809 Aluminum Water PumpCavitation- Erosion Corrosion Rating0.2 1.0 maximum8 8 minimum¹ Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol.NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance andphysical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material SafetyData Sheets for further information.Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whetherproduct and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance withapplicable laws and other governmental enactments. The manufacturer’s warranty is limited to the claims of product meeting stated performance specifications. It isthe responsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.Created on 3-Aug-11Page 2 of 2