DANLY - Air Press - Clark and Osborne

AIR TOGGLE PRESSESDanly Air Toggle Presses are designed for high-tonnage productionof metal and plastic parts involving piercing, forming,cutting, trimming, embossing, riveting, coining and assemblyoperations. They provide compact, reliable operation in 7 to12 ton capacities with shutheight allowances ranging from6 5 ⁄8" to 8 1 ⁄2". Yet, this power is generated through conventionalshop air.Danly’s unique air toggle design multiplies shop air pressuremany times to provide tonnage comparable to smallhydraulic or mechanical presses costing much more. A convenienthand wheel lets you adjust the slide throughout the fullrange of the stroke, permitting selection of the shortest andsafest stroke length, while maintaining high production rates.The rugged construction, dependable operation and reliablesafety features of Danly Air Toggle presses make themvery competitive with small hydraulic or mechanical pressesand at a much lower operating cost.Danly’s experienced staff is ready to provide any technicalassistance you may need in selecting the air press or air togglepress that is right for your application. Each is backed bymore than 75 years of leadership in the metalforming industry.SLIDE ADJ.SCREWCOVERREMOVALSCREWS35 1 /4512 7 /817 7 /89 1 /48 5 /16STROKE ADJ.HAND WHEEL7 7TOP OFMTG. TABLE2 1 /4 149x54 1 2/25 3 /4311 11 /16 DIA. X 2 DEEP143 93 1 /249 1 /16 DIA. (2) HOLESAir Toggle Press SpecificationsModelCapacity —Tons 1/32 up @ 80 PSI***7 T79 T910 T1012 T12Stroke Range — Inches1⁄4 - 3 1 ⁄43⁄16 - 2 1 ⁄21⁄8 - 1 7 ⁄81⁄16 - 1 1 ⁄2Shutheight-Top of bed to bottom of slideStrokedown adjustment up — InchesRam Adjustment — Inches6 - 5 ⁄8Approximate Weight — Lbs. 72017 - 3 ⁄817 - 3 ⁄418 - 1 ⁄21* Note: All models require clearance in table top for stroke adjusting screw extension.** Note: Optional opening in table top for scrap or part drop thru.*** Note: Press capacity will change in relation to slide position above bottom of stroke.6