Dry-lining versus a hemp and lime insulating render - University of ...

More documents

Recommendations

Info

Evrard, A. & De Herde, A., 2006. Dynamical interactions between heat and mass flowsin. Research in Building Physics and Building Engineering, pp.69-76.Evrard, A & De Herde, A., Hygrothermal Performance of Lime-Hemp WallAssemblies, Journal of Building Physics Vol. 34, No. 1—July 2010Flower, A.R., 2009. Hemp Lime and Cellulose Internal Insulation for Solid Walls.Course work. Machynlleth: Centre for Alternative Technologies Centre forAlternative Technologies.Fraunhofer IBP, 2001. IBP/Software/WUFI. [Online] Available at:http://www.wufi.de/index_e.html [Accessed 7 July 2010].Fraunhofer IBP, 2010. Moisture Transport In Building Materials. [Online] Available at:http://www.hoki.ibp.fraunhofer.de/wufi/wufi_frame_e.html [Accessed 28 June2010].Hammond, G. and Jones, C. (2008) Inventory of Carbon and Energy (ICE) version 1.6a.Sustainable Energy Research Team, Department of Mechanical Engineering,University of Bath, UK. Available from: www.bath.ac.uk/mech-eng/sert/embodied(accessed 12 July 2009)Hansen, J & Sato M, ―Paleoclimate Implications for Human-Made Climate Change‖,NASA 2011,http://www.columbia.edu/~jeh1/mailings/2011/20110118_MilankovicPaper.pdfAccessed Oct 2011Hens H., A. Janssens, W. Depraetere, J. Carmeliet, J. Lecompte ―Brick Cavity Walls: APerformance Analysis Based on Measurements and Simulations‖ Journal ofBuilding Physics; 31; 95; 2007Hukseflux Thermal Sensors, 2011 ‗APPLICATION AND SPECIFICATION OF HEATFLUX SENSORS Version 9904‘http://www.hukseflux.com/downloads/thermalScience/applicAndSpec.pdf viewed2011.International Energy Agency (IEA), ―Integral Building Envelope PerformanceAssessment‖ Technical Synthesis Report, IEA ECBCS Annex 32, 2003Jackson, J. Li, Y. Murrells, T. Passant, N. Sneddon, S. Thomas, J. Thistlethwaite, G.Dyson, K. Cardenas, L. Greenhouse gas inventories for England, Scotland, Walesand Northern Ireland: 1990 – 2007, Pivot Tables.2009Künzel, H.M., 1995. Simultaneous Heat and Moisture Transport in buildingComponents. Stuttgart: Fraunhofer IBP.Künzel, H.M., 1998. Drying of Wall Structures with Insulation Systems. Bauphysik,pp.18-23.Künzl, H.M., 1998. Effect of interior and exterior insulation on the hygrothermalbehaviour of exposed walls. Materials and Structures/Materieux et Constructions,31(H206), pp.99-103.Künzl, H.M. & Kießl, K., 1996. Drying of brick walls after impregnation.Baustandsetzen, (2), pp.87-100.Kymalainen, H. and Sjoberg, A. (2008) ‗Flax and Hemp Fibres as Raw Materials forThermal Insulations‘. Building and Environment 43 pp1261-1269Joel Lewis (January 2010) Managing Moisture in the Renovation of the Solid WallHousing Stock. A comparative study of Hemp-lime against Dry-lining (MScThesis) Thesis, MSc. Architecture: Advanced Environmental and Energy Studies,University of East London.16
Miskin, N. (2010) The Carbon Sequestration Potential of Hemp-binder: A study ofembodied carbon in hemp-binder compared with dry lining solutions for insulatingsolid walls. Thesis, MSc. Architecture: Advanced Environmental and EnergyStudies, University of East London.Murphy, R.J. and Norton, A. (2008) Life Cycle Assessments of Natural Fibre InsulationMaterials Final Report for National Non Food Crops Centre and DEFRAPadfield T, Jensen L. A., Humidity buffer capacity of unfired brick and other buildingmaterials, 2009,http://www.conservationphysics.org/wallbuff/buffer_performance.pdf accessed Oct2011.Pervaiz M. ―Carbon storage potential in natural fiber Composites‖; Resources,Conservation and Recycling 39; 325_/340; 2003Ronchetti, P. (2007) The barriers to the mainstreaming of lime-hemp: A systemicapproach. Thesis, MSc. Sustainable Development, Dublin Institute of TechnologyRhydwen, G. R. (2006) A model for UK hemp cultivation and processing to supply thebuilding industry with hurds for hemp and lime concrete and fibres for insulationbats, with the ethos of environmental protection as a priority. Thesis, MSc.Architecture: Advanced Environmental and Energy Studies, University of EastLondonRhydwen, R. (2009) Lecture: Hemp / Lime (1a) History and Background to hemp(Cannabis Sativa L.) AEES Module C3 Study Book, May 2009 pp85-103Rockström, J.,Steffen W., Noone K., Persson A, Chapin III F. S., Lambin E.F., LentonT.M., Marten Scheffer M. et al ―A safe operating space for humanity.‖ Nature, 461,472-475, 2009.Sedlbauer, K. & Künzl, H.M., 2000. Frost dmage of masonry walls - a hygrothermalanalysis by computer simulation. Journal of Thermal Envelope and BuildingScience, 23, pp.277-81.Small, E. Hemp: ―A new crop with new uses for North America‖. p. 284–326. In: J.Janick and A. Whipkey (eds.), Trends in new crops and new uses. ASHS Press,Alexandria, VA.2002Toman, J., Vimmrola, A. and Cerny, R. (2009) ‗Long-term on-site assessment ofhydrothermal performance of interior thermal insulation systems without watervapour barrier‘. Energy and Buildings 41 pp 51-55Wilkinson, S. (2009) A study of the moisture buffering potential of hemp incombination with lime and clay based binders. Thesis, MSc. Architecture:Advanced Environmental and Energy Studies, University of East London.Woolley, T. (2009) Lecture: Sustainable Building Materials (3) - Sustainable InsulationMaterials. AEES Lecture Notes pp 197-210Yates, T., 2002. Final Report on the. Client Report. Watford: BRE.Yates, T., 2003. Thermogaphic Inspection of the Masonry and Hemp Houses -Haverhill, Suffolk. Client Report. Garston: BRE.Zirkelbach, D., Holm, A. & Künzel, H.M., 2005. Influence of temperature and relativehumidity on the durability of mineral wool in ETICS. In 10DBMC InternationalConference On Durability of Building Materials and Components. LYON, 2005.17
Page 1: Dry-lining versus a hemp and lime i
Page 5 and 6: computer model to predict the poten
Page 7 and 8: Where U errQ , U errTns and U errTo
Page 9 and 10: Various hempcrete combinations were
Page 11 and 12: Figure 9: The error bars represent
Page 13 and 14: Figure 11: Increase MC content in b
Page 15: Allwood J. M., Cullen J.M., Milford

Dry-lining versus a hemp and lime insulating render - University of ...

Create successful ePaper yourself

Delete template?

Save as template?