impact attenuator test results - Blogs - Dalhousie University
impact attenuator test results - Blogs - Dalhousie University
impact attenuator test results - Blogs - Dalhousie University
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
APPENDIX B-22012 FSAE IMPACT ATTENTUATOR DATA REPORT – Page 3 of 3<strong>University</strong> Name: <strong>Dalhousie</strong> <strong>University</strong> Car Number(s) & Event(s): 47, Michigan 2012Figure 5: Design DrawingsLength (fore/aft direction): ___200__ mm (>=200mm)Width (lateral direction): ___200__ mm (>=200mm)Height (vertical direction): ___100__ mm (>=100mm)Attenuator is at least 200mm wide by 100mm high for at least 200mm: YesAttach additional information below this point and/or on additional sheetsTest schematic, photos of <strong>test</strong>, design report including reasons for selection and advantages/disadvantages, etc.Additional information shall be kept concise and relevant.
Change language