Transitional profiles ring segments - rectangular - ZVVZ a.s.

More documents

Recommendations

Info

$TvarovÃ© pÅechody kruh - obdÃ©lnÃk \(dÃ¡le jen pÅechody ... - ZVVZ a.s.$

Attachment 1 to KM 12 0440a1 INTRODUCTION1.1 These are the instructions for transitional piping profiles ring segment - rectangular pipinggroup III (further as transitions). The instructions contain safety precautions, supply, shipping, hand over,storage, installation, maintenance, disposal and guarantees.1.2 Maintenance of the transitions may be done only by authorised personnel trained for suchwork and in accordance to these instructions.1.3 The products specifications are detailed in the affixed label.2 SAFETY2.1 Safety is a condition of the quality of installation into the pipeline network.2.2 The transitions must follow ČSN 34 1390 norms and during conductive connection beprotected from static electricity. The materials used for such a conductive connection are 1 nut and boltwith 2 washers (on either end - see design 1 ). These NBW’s must be zinc plated to prevent corrosion.The conductive connection flanges may be located arbitrarily along the pipeline.2.3 Handling of the transitions much be as per safety regulations. The transitions are attachedonly after flanges, at transitions with hanging eyelets.PIPENUTSEALBOLTWASHERSDesign 1 Piping - conductive connection3 SUPPLY, SHIPPING, HAND OVER, STORAGE3.1 Supply3.1.1 Supplied is the complete transition as ordered and the accompanying technicaldocumentation.3.1.2 The technical documentation includes:a) certification of quality and completeness of the product,b) catalogue list including attachment 1 - directions for use.- 2 -
Attachment 1 to KM 12 0440a3.2 Shipment3.2.1 The transitions are shipped unwrapped and must be well secured for transport.3.2.2 The weight of the heaviest transition is approx. 380 kg.3.3 Hand over3.3.1 The scope and manner of hand over is dictated by the contract that has been agreedbetween the manufacturer and the customer.3.3.2 During the transfer of the goods it is essential that the customer checks to see if thetransitions have been supplied according to the order respective of size and design (see clause 3.1.1) andinclusive of the technical documentation (see clause 3.1.2.) and whether any defects or damage isevident.3.4 Storage3.4.1 The transitions must be stored is such a way so that possible harm will be minimal. Theyare always stored with the largest flange down.3.4.2 During storage, it is essential that the transitions be periodically checked for to insure theirservice condition.3.4.3 Before the transition is to be installed, the storage provider will provide a document statingthat the transition has been correctly stored and monitored for damage during the period of storage.4 INSTALLATION4.1 Before installation, it is essential that the transition is examined so that it conforms to thepurchase order (see clause 3.1.1.) and includes all technical documentation (see clause 3.1.2.), that thereis no visible damage from the manufacturer and all storage principles have been followed as per clauses3.4.1 to 3.4.3.4.2 The installation of the transitions is performed within the HVAC works and is governed bythe project documentation.4.3 Fastening the transition to the piping is by bolting the pipes together with a seal between theflange surfaces (see design. 1).5 MAINTENANCE AND REPAIRS5.1 Checking of sealing and leakage of the transitions should be performed periodically. Anydamage should be remedied as soon as possible.6 DISPOSAL6.1 After the service life of the transition its disposal must conform to Czech law no. 185/2001Sb. and according to the internal policies of the customer purchasing the transition.6.2 disposal of the transitions is resolved by scrapping- 3 -
Page 1 and 2: CATALOGUETRANSITIONAL PROFILESRING
Page 3 and 4: Continued table 1D A x B L Weight D
Page 5: ZVVZ a. s.Ecological equipment supp

Transitional profiles ring segments - rectangular - ZVVZ a.s.

Create successful ePaper yourself

Delete template?

Save as template?