Sivoia QED® |specification guide - Lutron

skylight blind | angles of installationskylight blind | measuring instructionsAngles of installationSivoia QED® skylight blind allows for flexible installation at any angle between 0º and45º with consistent aesthetic results. Regardless of slope, the drive side is alwayslocated at the top. Blind closes from top to bottom with fabric unrolling closestto the window.Drive sidehorizontal ceiling = 0ºMeasuring for inside mount skylight frames12Measure the well width at each end and the centre ( 1 2 3 ), where the frame willmount inside the skylight well.NOTE: For sloped ceilings, mount the roller at the top of the opening.Measure the well length at each end and the centre ( 4 5 6 ), where the framewill mount inside the skylight well.3 Measure each diagonal ( 7 8 ) dimension of the light well.Drive sideany angle from 0º to 45º4 Order the blind using the following formula to make sure the frame fitsin the well opening.Frame Width = (Min measured width) - (Max diagonal-Min diagonal)2Frame Length = (Min measured length) - (Max diagonal-Min diagonal)2Example: Skylight well measuring1711 mmWidth of skylight well45º5971 mm4978 mmLength ofskylight well2714 mm6971 mm81200 mm71213 mm3714 mmFor this skylight well, order a skylight blind with the following dimensions:Frame Width = 711 mm - (1213 mm - 1200 mm) = 704.5 mm2Frame Length = 971 mm - (1213 mm - 1200 mm) = 964.5 mm234 | Lutron Lutron | 35