boltrope track for carbon fiber mast - Marineware
boltrope track for carbon fiber mast - Marineware
boltrope track for carbon fiber mast - Marineware
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BOLTROPE TRACKFOR CARBON FIBER MASTThe following Antal system can be used on this new Antal <strong>track</strong>:? HS 40 <strong>for</strong> boats up to 40 ft (Antal catalogue pg. 114);? HS Race with # 60 batten car <strong>for</strong> boats up to 50 ft (pg. 116);? HS Race with # 70 batten car <strong>for</strong> boats up to 60 ft (pg. 116).22TRACK SIZES3.5Mod. 601.120/C15.7Aluminium profile hard black anodized and tefloncoated.Weight: 0.55 kg/mLengths of 3 m available.32scala 1:1FIXINGN° 2 x 3 viti Ø 5 mmThe <strong>track</strong> will be glued to the <strong>mast</strong>(SP SYSTEM - SPABOND 345).100Fixing can be improved, on most loaded zones(<strong>mast</strong> head and reefing positions), with 2 alu sideplates screwed to the <strong>mast</strong>.21 Mod. 690.322/CACCESSORIESMod. 602.321/CLOADERIt allows the cars to be loadedand unloaded easily.L = 500 mmMod. 690.321/CTRACK JOINTConnection of differentsections will be done with2 s.steel pins.Mod. 692.311/CEND-FITTING<strong>for</strong> <strong>mast</strong> head.
BOLTROPE TRACK SIZE 90/130FOR CARBON FIBER MASTThe following Antal system can be used on this new Antal <strong>track</strong>:- HS 90 <strong>for</strong> boats up to 80 ft;- HS 130 <strong>for</strong> boats up to 50 ft.TRACK SIZESAluminium profile hard black anodized and tefloncoated.Weight: 1.1 kg/mLengths of 3 m available.FIXINGThe <strong>track</strong> will be glued to the <strong>mast</strong> (SP SYSTEM - SPABOND 345)For an easier gluingeach <strong>track</strong> is fixedwith 3 positioningscrews.N° 2 x 4 screws Ø6 mmFixing can beimproved, on mostloaded zones (<strong>mast</strong>head and reefingpositions), with 2 aluside plates screwedto the <strong>mast</strong>.
TRACK JOINTConnection of differentsections will be donewith 2 s.steel pins.END-FITTING<strong>for</strong> <strong>mast</strong> head.Fixing: n° 3 screws Ø6mm.LOADERIt allows the carsto be easily loadedand unloaded.
Change language