TRAINING MANUAL - UV Gel Nail Polish

GELeration Soak-Off
Gel Polish Application
Abbreviations: C��������������������������P C – CLARIFY Nail Cleanser, P ��������������������S���������������������������
– PREP Nail Primer, S – START Base Gel,
G B – BUILD Clear Gel, F – FINISH Gel, E – ERASE Remover
G – Soak O� Gel Polish, B�����������������������������F���������������������� E����������������������������
1. Apply a very THIN layer of START Base Gel (S) and cure for 1 minute with UV light or
10 seconds with LED light. Once nails are removed from the LED lamp, stroke the nail
from base to free edge using the Pro Builder 9 Brush – to remove excess liquid and
shine.
o You will need to prep the Pro Builder 9 brush before using. First use a small amount of BUILD (B)
to work into your brush. Push your brush into a form or seal of the Build Jar, working the gel
between the hairs. Then wipe brush on lint free pad with Clarify (C) to remove the Build from the
brush. This will prime your brush to make more pliable and may eliminate air bubbles.
2. (Optional) If client needs extra strength or support, apply a thin layer of BUILD (B) with
the Pro Builder 9 BRUSH. Brush down to the free edge from the cuticle area and
always seal the edges of nail. Cure for 2 minutes with UV light or 30 seconds with LED
light.
3. Apply first THIN coat of chosen Soak-Off Gel Polish (G) from cuticle to free edge. Use
long complete strokes. Seal edges. Cure for 2 minutes with UV light or 20-30 seconds
with LED light. Cure times may vary depending on polish shade. For your reference:
o Light & Sheer Shades 20 seconds
o Black & White Shades 30 seconds
o Metallic & Shimmer Shades 30 seconds
o Dark Shades 30 seconds
4. Apply second THIN coat of Soak-Off Gel Polish (G). Cure for 2 minutes with UV light or
20-30 seconds with LED light.
5. Apply THIN coat of FINISH Soak-off Sealer (F) from the cuticle to the free edge using a
thin, light application. Cure for 2 minutes with UV light or 20-30 seconds with LED light.
6. Wipe away the tacky residue with CLARIFY (C) with a lint free pad.
7. Generously apply JESSICA HAND & BODY EMULSION.
Tech Tip: Clean any excess gel from the cuticle area with a JESSICA Orangewood stick
8. Apply JESSICA PHENOMEN OIL to cuticle and massage around cuticles. Do not
before curing. apply directly on nail.
Nails are completely dry when cured under LED & UV Light but needs 5-10 minutes to harden.
Treatment time approx 45 minutes
Tech Tip: Clean any excess gel from the cuticle area with a JESSICA Orangewood stick
before curing. Treatment time approx 45 minutes