Coolant Pump & Tank Systems - Rowe Sales & Service Inc.

More documents

Recommendations

Info

Pump and Tank SystemsAt Graymills, we recognize the need to combine the rugged dependability of our pumps with a variety of tanksizes and shapes, to provide a comprehensive line of fluid collection and recirculating systems. We know thatthese tank systems will see a lot of hard work and rough treatment during their long working lives. That’s whyGraymills designs its tanks the way they should be built . . . like a tank. To prove our point, take a look at thecutaway below and notice the built-in durability and quality.634• To assure maximum strength and uniformity, tanks are jigand fixture assembled and spot welded prior to MIG seamwelding. Every tank is then dye penetrant-tested for 24hours. Not even a pinhole leak can slip past thisprocedure. As a result of these stringent procedures, eachtank carries Graymills’ one year warranty.• A wide selection of standard pump and tank systemsavailable to meet your requirements.• We also manufacture custom systems for uniqueapplications.1 2 5Features, capabilities and materials differ from tankto tank, but each follows in the Graymills tradition ofquality and dependability. We don’t believe in shortcutsthat might compromise the quality of ourproducts . . . or your satisfaction. And if you need aspecial, one-of-a-kind pumping system, we are readyto design and build one to meet your specificrequirements. For more information on any of ourproducts or help in ordering, call us or a member ofour nationwide network of distributors. We’re readyto solve your pumping and fluid circulating problems.1. Durably constructed of cold rolled ASTM A-366 steel.Stainless steel tanks available.2. Tank systems larger than 5 gallons contain from one tofour baffles, carefully sized and positioned to make solidssettle out and keep circulated fluid clean.3. Depending on tank size and flow requirements, tankslarger than 5 gallons are equipped with either a wire meshscreen bowl or chip collection basket. On the coolantreturn, chip collection baskets have an extra baffle and afluid return slot to further aid the settling process.4. Tank and collection basket edges are hemmed toeliminate exposed sharp edges and increase rigidity.5. All exterior tank surfaces are cleaned with a phosphatizedwash prior to powder coating for improved adhesion.6. Lids are recessed to contain spills.Standard Systems SelectionTank Size Tank Features Pumps Available in Standard Units(Reference page numbers for complete pump data)3 Gallon5 Gallon6 Gallon10 Gallon17 Gallon21 Gallon34 Gallon50 Gallon85 Gallon110 Gallon18 mesh screen bowl18 mesh screen bowl18 mesh screen bowl;1 baffle in tank18 mesh screen bowl or chipbasket; 1 baffle in tank18 mesh screen bowl or chipbasket; 2 tank bafflesChip basket and 1 bafflein tankChip basket and 3 bafflesin tankChip basket and 4baffles in tankChip basket and 3 bafflesin tankChip basket and 3baffles in tankVPJ5 (page 25)HR35 (page 28)FM68H (page 25), HR35 (page 25)FM68H (page 25), HR35, HR45(page 25), TN33 (page 25)FM68H (page 25), TN33, TN333H 3 /4(page 25)TN31 (page 26), TN41 (page 26)TN37, TN37H-1, TN37H-1- 1 /2 (page26), TN46, TN56 (page 26)TN37H-1, TN37H-1- 1 /2 (page 26),TN46H, TN56 (page 26), TN57H-3(page 26), TN67, TN77 (page 26)TN37H 1- 1 /2 (page 27), TN57,TN57H-3 (page 27), TN77 (page 27)TN57, TN57H-3 (page 27), TN77(page 27)3-6-10-17 GALLON SYSTEMS3 GALLON TANK SYSTEM3-VJ5: Features a Graymills VPJ25 abrasive resistant pumpmade of high strength thermoplastic. Pump: 1/25 HP, 1500RPM, 5 / 8" ID discharge. Maximum viscosity: 300 SSU. Tankis 18 gauge steel. Four feet of 1 / 2" vinyl hose and 18 meshscreen bowl included.6 GALLON TANK SYSTEMSAll units are constructed with 18 gauge steel and contain an18 mesh screen chip collecting bowl.6-HR35: 1/25 HP, 1500 RPM. Maximum viscosity: 150 SSU.Optional 3 / 8" ID flexible metal nozzle with valve and 4’neoprene 1 / 2" ID hose. 1 / 2" NPT discharge.6-HR45: 1/8 HP, 1725 RPM. Maximum viscosity: 500 SSU.Optional 3 / 8" ID flexible metal nozzle with valve and 4’neoprene 1 / 2" ID hose. 1 / 2" NPT discharge.24 1-888-GRAYMIL www.graymills.com
Pump and Tank Systems3-6-10-17 GALLON TANK SYSTEMSPump and Tank systems with 3-17 gallon capacities are furnished with eithera mesh screen bowl or chip collection basket. Consult model listings belowfor availability of these options.6-FM68H: 1/8 HP, 3450 RPM. Maximum viscosity: 500SSU. 1 / 2" NPT discharge.6-SG2: 1/8 HP, 1725 RPM. Maximum viscosity: 5,000 SSU.Includes intake filter, relief valve and 3 / 8" discharge pipe.Hoses, fittings and special filters available as accessories.Recommended for use with Graymills Stocklube ® Systems.3-6-10-17 Gallon10 GALLON TANK SYSTEMSTanks are constructed from 18 gauge steel with a single built-inbaffle. Either a chip basket and/or an 18 mesh screen bowlcan be ordered, depending on the model.10-IMV: 1/8 HP, 3450 RPM, 1 / 2" NPT discharge throughintegral flange. Maximum viscosity: 500 SSU. 10-IMV doesnot come with options.11-HR35: 1/25 HP, 1500 RPM. 1 / 2" NPT discharge. Maximumviscosity: 150 SSU. Optional 3 / 8" ID flexible metal nozzle andvalve, 4’ neoprene 1 / 2" ID hose, and 18 mesh screen bowl.11-HR45: 1/8 HP, 1725 RPM, 1 / 2" NPT discharge. Maximumviscosity: 500 SSU. Optional 3 / 8" ID flexible metal nozzle withvalve, 4’ neoprene 1 / 2" ID hose, and 18 mesh screen bowl.11-FM68H: 1/8 HP, 3450 RPM, 1 / 2" NPT discharge throughintegral flange. Maximum viscosity: 500 SSU.X11-TN33: 1/4 HP, 1725 RPM. 3 / 4" NPT discharge.Maximum viscosity: 500 SSU.11-SG1: 1/25 HP, 1500 RPM, gear pump. Maximum viscosity:2,000 SSU. Optional 1 / 4" flexible metal nozzle with valve,4’ neoprene 3 / 8" ID hose, and 18 mesh bowl. 6’ cord, plug,and switch.11-SG2: 1/8 HP, 1725 RPM, gear pump. Maximum viscosity:5,000 SSU. Includes 1 / 4" flexible metal nozzle with valve,4’ neoprene 3 / 8" ID hose, and 18 mesh bowl.11-SG4: 1/4 HP, 1725 RPM, gear pump. Maximum viscosity:5,000 SSU. Includes 1 / 4" flexible metal nozzle with valve,4’ neoprene 3 / 8" ID hose, and 18 mesh bowl. Recommendedfor use with Graymills Stocklube ® Systems.17 GALLON TANK SYSTEMSTanks are constructed of 16 gauge steel with two baffles.17-FM68H: 1/8 HP, 3450 RPM, 1 / 2" NPT discharge throughintegral flange. Maximum viscosity: 500 SSU. 18 meshscreen bowl. Available with optional chip basket.17-TN33: 1/4 HP, 1725 RPM, 3 / 4" NPT discharge. Maximumviscosity: 500 SSU. Chip basket included.17-TN33H: 3/4 HP, 3450 RPM, 1" NPT discharge.Maximum viscosity: 300 SSU. Chip basket included.TANK SIZE(GAL.) A B C*(Max.) WIDTH3 6 1/ 4" 16" 4 3/ 8" 9"6 9" 18" 73/8" 91/2"10IMV 101/2" 24" 51/2" 93/4"10 113/8" 25" 81/2" 10"17 111/2" 28" 111/2" 14"* Motor height changes with HP, maximum.MODEL PUMP VOLTAGE APPROX. GPM (WATER)MODEL SUFFIX AT SPECIFIED FT. OF HEAD3 GALLONS 2 3 4 53-VJ5 VPJ25 A, B 5 3 2 16 GALLONS 4 6 8 10 12 14 166-HR35 HR35 A, B 10 8 56-HR45 HR45 A, B, E, F 10 10 7 46-FM68H FM68H E, F 15 14 12 96-SG2 SG2A, B, F 1.3 1.210 GALLONS 6 8 10 14 16 1810IMV IMV08 E, F 8 7 511-HR35 HR35 A, B 8 511-HR45 HR45 A, B, E, F 10 7 411-FM68H FM68H A, B, F 15 12 9 6X11-TN33 TN33 E, F 26 17 12 511-SG1 SG1 1/25 A, B .75 .6 .511-SG2 SG2 A, B, F 1.3 1.2 1.111-SG4 SG4 1/4 E, F 3.5 3.4 3.311-SG4 SG4 1/2 E, F 3.5 3.4 3.317 GALLONS 10 12 14 16 1817FM68H FM68H GAM,E, F, 14 12 9 6X17TN33 XTN33 E,F 26 22 17 12 5HIGH HEAD MODELS 24 35 45 55X17TN33H3/4XTN33H3/4 F 55 40 33 25Note: “X" prefix in part number indicates chip basket is included.1-888-GRAYMILwww.graymills.com25
Page 1 and 2: Pumps Pump and Tank Systems Filters
Page 3 and 4: Table of Contents1. How To Order Pu
Page 5 and 6: Superflo ®Centrifugal PumpsGraymil
Page 7 and 8: TN SeriesTN 40 SERIES SPECIFICATION
Page 9 and 10: Agitator SeriesAgitator pumps are d
Page 11 and 12: FM SeriesFM Series pumps are compac
Page 13: HSP SeriesPerformance, reliability,
Page 17 and 18: IMS SeriesIMS models are dependable
Page 19 and 20: Flange Mount SeriesDSW/ESWDSW/ESW S
Page 21 and 22: MSPR Multi-stage SeriesMSPR Multi-s
Page 23: DDP Series1/2″ Polypropylene1″
Page 27 and 28: Pump and Tank Systems85 AND 110 GAL
Page 29 and 30: Bed Filter/Magnetic Separator/Coola
Page 31 and 32: Stocklube SystemsCombine these for
Page 33 and 34: Oil SeparatorPortable coolant-condi
Page 35 and 36: Accessories PUMPING SYSTEMSEFLEFSDD

Coolant Pump & Tank Systems - Rowe Sales & Service Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?