Tribology of Manufacturing Processes - Presses des Mines

Wear Tests for Stamping Dies via Slider Type of Test System 271Ö.N. CORA, K. NAMIKI, M. KOÇWear reduction of fine blanking tools by high performance PVD tool coating andadapted substrate preparation 281F. KLOCKE, H. WEGNER, P. MATTFELD, M. ZIMMERMANN, K. BOBZIN, N.BAGCIVAN, M. EWERING, R. BRUGNARAEvaluation of Tribo-characteristics of DLC-Si by Metal Forming Simulators 293K. DOHDA, Y. TSUCHIYA, K. KITAMURA, H. MORIQualification of a new test for wear investigation on coated tools 303T. SCHRADER, M. MERKLEIN, U. ENGELEffect of tool coatings on friction behavior during hot aluminum extrusion 313A. SEGATORI, N. BEN KHALIFA, A. JÄGER, L. DONATI, L. TOMESANI, A. E.TEKKAYATribological behaviors of carbon-carbon composites prepared by chemical liquid-vaporinfiltration 325K.-Z. LI, H.-L. DENG, H.-J. LI, P.-Y. WANGThe Multi-Scale Analyses of the Grit Size Effect of Ground Surfaces 335M. BIGERELLE, T. MATHIA, S. BOUVIERNew effective and precision polishing method with water-based slurry, controlled by ACelectric field during processing 347H. IKEDA, Y. AKAGAMI, T. KUSUMI,Y. SATO, T. K. DOIEfficient fabrication process of optical functional surfaces by using nano-plastic formingM. YOSHINO, R. OKABE, H. OHSAWA, A. YAMANAKA, T MATSUMURA 355Rapid fabrication of functional surface using the combination of Nano-Plastic Forming,coating, and roller imprinting process 365W. KURNIA, M. YOSHINOControl of Wettability with Micro-scale Structure on Functional Surface 375T. MATSUMURA, T. HIROSE, M. YOSHINO, N. UMEHARAForging and wire-drawingExperimental validation of the plastic wave approach in hot forging of steels 385L. VIGNERON, E. VIDAL-SALLE, J.C. BOYER, M. DUBAR, L. DUBARCrystal Plasticity Finite Element Modelling of Surface Asperity Flattening duringUniaxial Planar Compression 397H.J. LI, Z.Y. JIANG, D.B. WEI, P.J. YAN, J.T. HAN, A.K. TIEUCoefficient of Friction at the Interface of Lubricated Upsetting Process 407A. AZUSHIMA, S. YONEYAMA, H. UTSUNOMIYA