Bollards - Marshalls
Bollards - Marshalls
Bollards - Marshalls
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
<strong>Bollards</strong><br />
Concrete <strong>Bollards</strong> 33<br />
Monoscape 34<br />
Bellitalia: Concrete, concrete with metals and polished concrete 37<br />
Natural Stone <strong>Bollards</strong> 39<br />
Geoform: Simply Stone 40<br />
Cast Iron and Aluminium <strong>Bollards</strong> 41<br />
Imperial 42<br />
Sineu Graff 44<br />
Antony Gormley 45<br />
PAS 68 Impact Tested <strong>Bollards</strong> 47<br />
RhinoGuard 47<br />
Steel <strong>Bollards</strong> 49<br />
Rhino 49<br />
Sineu Graff 52<br />
Stainless Steel <strong>Bollards</strong> 53<br />
Rhino 54<br />
Sineu Graff 57<br />
Telescopic <strong>Bollards</strong> 58<br />
Rhino 58<br />
Rhino Hoop Barriers 65<br />
Polyurethane <strong>Bollards</strong> 67<br />
Ferrocast® <strong>Bollards</strong> 67<br />
Ferrocast Special <strong>Bollards</strong> 76<br />
Plastic <strong>Bollards</strong> 79<br />
Plastic <strong>Bollards</strong> 79<br />
Plastic Vergemarkers 82<br />
Plastic Low Level Signage 83<br />
Recycled Plastic Composite <strong>Bollards</strong> 85<br />
Intruplas 85<br />
Timber <strong>Bollards</strong> 86<br />
Sineu Graff 86<br />
‹ RS 001 <strong>Bollards</strong>, Galleries Retail Park, Washington 32
33<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Concrete <strong>Bollards</strong><br />
Spherical 700 Bollard<br />
Spherical 500 Bollard in blue and Spherical 700 Bollard in blue with leaf pattern<br />
Concrete bollards provide effective security and perimeter protection, whilst also<br />
being incredibly durable and cost effective.<br />
Our comprehensive range of concrete bollards contains numerous designs and<br />
finishes encompassing the purely utilitarian and those with contemporary styling,<br />
providing real choice in precincts, trafficked routes, residential and urban areas.<br />
All bollards are manufactured from high quality aggregates and are fully reinforced.<br />
Quality control cubes are tested in accordance with EN 12390-3:2001 at seven and<br />
28 days to a minimum strength requirement of 30N/mm2 at 28 days.<br />
Colours and Finishes<br />
<strong>Bollards</strong> are available in a wide variety of colours, including mixes manufactured to<br />
coordinate with <strong>Marshalls</strong> concrete paving.<br />
Four finishes are available: polished, ground, exposed and etched.<br />
A bespoke specialist finish can be created to order whereby a surface is sandblasted<br />
to show a name, logo or pattern.<br />
The Beadalite finish is a highly reflective coating which is composed of glass micro<br />
beads that are applied to the product, acting like thousands of tiny cats’-eyes and<br />
making the bollard ‘light up’ when vehicle headlights are shone across them.<br />
Colours<br />
Precise colour and surface texture should be judged from actual materials rather<br />
than photographic representations.<br />
Smooth Grey<br />
Conservation<br />
Harvest Buff Charcoal<br />
Smooth White Exposed Silver Grey Exposed Cream<br />
New mixes to co-ordinate with <strong>Marshalls</strong> Paving<br />
Exposed White<br />
Exposed Black Exposed Brown Exposed Black/White Exposed River Gravel Etched Silver Grey<br />
Etched Pale Buff Beadalite<br />
Saxon<br />
Silver Grey<br />
Natural Buff Charcoal Red Marigold<br />
Finishes<br />
Polished Ground<br />
Exposed Etched Patterned
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD01 <strong>Bollards</strong> Q50 190 Seating ............................ page 90<br />
Litter Bins ........................ page 174<br />
Concrete <strong>Bollards</strong><br />
Cubes in Silver Grey, Leeds Valley Business Park<br />
SPHERICAL 500 SPHERICAL 700<br />
SPHERICAL ILLUMINATED BOLLARD CUBE<br />
275<br />
400 2<br />
500Ø<br />
275<br />
700Ø<br />
Coordinating items<br />
Cycle Parking ................... page 219<br />
Planters ........................... page 232<br />
Customised Products<br />
n <strong>Bollards</strong> and columns may be customised to receive a motif disc. Manufactured<br />
to special order the disc may convey instructions or provide information such<br />
as no entry, no parking, keep left or cycle path, alternatively they may hold<br />
commemorative plaques or corporate branding.<br />
n Other options such as reflective bands and high visibility discs can be specified.<br />
Please contact our Sales Office for information on colours and sizes.<br />
n <strong>Marshalls</strong> continue to produce a large back catalogue and would be pleased to<br />
quote for products not shown here.<br />
n For safe handling and placing, spherical and cube bollards are available with<br />
lifting hoops to order.<br />
Fixing<br />
n <strong>Bollards</strong> are root fixed.<br />
STOCK<br />
Ex Stock products are<br />
available in standard<br />
colours and finishes only<br />
50<br />
596 2<br />
660<br />
700Ø<br />
100<br />
200<br />
70<br />
600<br />
34
35<br />
WOODHOUSE<br />
RICHMOND<br />
COMPTON<br />
BOULEVARD 500<br />
150Ø<br />
230Ø<br />
305Ø<br />
305Ø<br />
245Ø<br />
260Ø<br />
455<br />
460<br />
BRIDGFORD<br />
STOCK 150Ø<br />
STOCK<br />
STOCK<br />
535<br />
455<br />
565<br />
380<br />
495<br />
247<br />
WILMSLOW<br />
TRURO<br />
BOULEVARD 700<br />
270Ø<br />
305Ø<br />
380Ø<br />
280Ø<br />
Shown with reflective band<br />
915<br />
455<br />
990<br />
460<br />
730<br />
365<br />
760<br />
460
WEXHAM<br />
CAMBRIDGE<br />
LARGE MARKER BOLLARD<br />
230Ø<br />
245Ø<br />
760<br />
460<br />
800<br />
450<br />
WEXHAM MAJOR<br />
MILLBANK WITH RIBBED TOP<br />
OVITO BOLLARD<br />
OPTIONS<br />
Product Diameter Length HAG Weight Standard Reflective Hazard Lift Out<br />
Description (mm) (mm) (mm) (kg) Finish/Colour Discs Banding Removable<br />
Boulevard 500 Bollard* 260Ø 742 495 93 Exposed Black Brown n<br />
Boulevard 700 Bollard 280Ø 1095 730 152 Exposed Black Brown n<br />
Bridgford Bollard 270Ø 1370 915 102 Smooth Grey n n<br />
Cambridge Bollard 245Ø 1250 800 138 Exposed River Gravel n<br />
Compton Bollard 245Ø 945 565 114 Smooth Grey<br />
Cube 660 2 670 600 350 Etched Top/Silver Grey Sides<br />
Large Marker Bollard 450 2 1155 705 441 Exposed Silver Grey n<br />
Millbank Bollard 230Ø 1460 1000 140 Exposed n<br />
Richmond Bollard 305Ø 990 535 152 Smooth Grey<br />
Spherical 500 Bollard 500Ø 775 500 166+69 Exposed Silver Grey<br />
Spherical 700 Bollard 700Ø 1000 700 444+165 Exposed Silver Grey<br />
Spherical Illuminated Bollard 700Ø 1000 700 450+165 Exposed White<br />
Truro Bollard 380Ø 1220 760 305 Smooth Grey<br />
Wexham Bollard 230Ø 1220 760 102 Exposed Silver Grey n<br />
Wexham Major Bollard 330Ø 1200 750 200 Exposed Silver Grey<br />
Wilmslow Bollard 305Ø 1450 990 253 Smooth Grey<br />
Woodhouse Bollard 230Ø 915 455 57 Smooth Grey n<br />
Ovito Bollard 260Ø 1200 900 95 Grey Granite<br />
*Also available as 300ø or 900ø sizes<br />
705<br />
450<br />
250<br />
STOCK STOCK<br />
Shown with<br />
beadalite band<br />
330Ø<br />
230Ø<br />
260<br />
900<br />
300<br />
750<br />
450<br />
1000<br />
460<br />
Ovito Bollard is available in grey granite<br />
and anthracite basalt (black) as shown.<br />
36
37<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD02 <strong>Bollards</strong> Q50 190 Seating ............................. page 96<br />
Litter Bins ........................ page 175<br />
Cycle Parking ................... page 220<br />
Concrete <strong>Bollards</strong><br />
Concrete, concrete with metals and polished<br />
Basso Castrocaro Bollard<br />
ALTO TIPO BOLLARD WITH COPPER BAND<br />
ALTO COPPER BOLLARD 33<br />
720<br />
915<br />
210Ø<br />
500<br />
1165<br />
Coordinating items<br />
Planters ........................... page 235<br />
Tree Protection ................ page 286<br />
Alto Tipo and Basso Castrocaro <strong>Bollards</strong> are steel reinforced bollards manufactured in<br />
white or grey granite concrete, vibrated, sandblasted and protected using an acrylic<br />
resin coating. The Alto Tipo Bollard consists of two elements linked by a threaded<br />
stainless steel bar and divided by a decorative copper band. Each bollard is fitted with<br />
a lifting hook for ease of installation. To install, simply place in the required position.<br />
Alto and Low Copper <strong>Bollards</strong> are manufactured from steel-reinforced precast concrete,<br />
vibrated, sandblasted and protected with a natural copper coating to a thickness of<br />
1mm. <strong>Bollards</strong> are formed from a copper shell filled with concrete and internally resin<br />
bonded, reinforced with a single hot dip galvanised steel rod 48mm in diameter.<br />
The Alto 33 is a removable system using floor socket fixings. Drill a 350mm deep,<br />
120mm wide hole and set the bollard’s floor socket in the hole in a cement bed.<br />
The bollard may be fixed permanently by drilling a 300mm deep, 100mm wide hole<br />
and setting the base directly in the hole in a cement bed. The bollard is also available<br />
with a key-operated floor socket system to open and close access routes.<br />
Polished <strong>Bollards</strong> are manufactured from a marble aggregate with a maximum particle<br />
size of 25mm, finished smooth and treated with a protective varnish to create<br />
an elegant polished effect. The upper level features a 40mm diameter brass plate.<br />
To facilitate moving, the Titano bollard framework consists of a hook and axle box<br />
complete with eyebolt, the Plutone has a threaded steel bar anchored to an axle box and<br />
eyebolt. To install either bollard, simply place in the desired position. The Sfera consists of<br />
a pipe and steel stirrups anchored to two axle boxes at each end of the bollard, and an<br />
eyebolt is screwed into the top axle box. To install, drill a hole, place the bollard vertically<br />
with the tang in the hole, fix with liquid cement then restore the paving.<br />
BASSO CASTROCARO BOLLARD<br />
BASSO COPPER BOLLARD 15<br />
450<br />
305<br />
406<br />
310
TITANO<br />
SFERA 400<br />
PLUTONE<br />
Polished Colours<br />
497<br />
500<br />
515<br />
294 394 494<br />
294 394 494<br />
214<br />
283<br />
400Ø<br />
Precise colour and surface texture should be judged from actual materials rather<br />
than photographic representations.<br />
637<br />
260<br />
377<br />
750<br />
827<br />
497<br />
SFERA 300<br />
SFERA 500<br />
Rosso Bianco Giallo Veneziano Verde Nero Porfido<br />
214<br />
357<br />
283<br />
470<br />
637<br />
260<br />
377<br />
PLUTONE BOLLARD WITH ASHTRAY<br />
Diameter Overall<br />
Product Colour Width Length HAG Weight<br />
Description (mm) (mm) (mm) (kg)<br />
Alto Tipo Bollard with Copper Band White or Grey 500 720 720 200<br />
Basso Castrocaro Bollard White or Grey 406 450 450 116<br />
Alto Copper Bollard 33 Copper 210 1165 915 28<br />
Basso Copper Bollard 15 Copper 305 310 310 36<br />
Titano Bollard See Swatch 500 515 515 200<br />
Sfera Bollard (300) See Swatch 294 497 283 41<br />
Sfera Bollard (400) See Swatch 394 637 377 95<br />
Sfera Bollard (500) See Swatch 494 827 470 190<br />
Plutone Bollard See Swatch 400 750 750 174<br />
Plutone Bollard with Ashtray See Swatch 400 685 685 168<br />
827<br />
685<br />
497<br />
294 394<br />
400<br />
214<br />
283<br />
357<br />
470<br />
637<br />
38<br />
260
39<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD03 <strong>Bollards</strong> Q50 190 Seating ........................... page 104<br />
Natural Stone <strong>Bollards</strong><br />
Riva Barioni Bench and Sphere Bollard<br />
Simply Stone is a range of functional and flexible pieces. Basic bollard shapes such as<br />
a cube, a sphere and a monolith are complemented by two angular benches, all will<br />
create clean and simple solutions for any urban space.<br />
The Simply Stone range uses high quality granite, one of the hardest stones which<br />
can be used to create bollards that are strong, durable and enduring. Simply Stone<br />
is available in six beautiful, harmonising colourways and available in polished or fine<br />
picked textures to provide striking contrasts and finished effects.<br />
Designed to form an aesthetic option for boundary marking applications, the<br />
Simple 150 Monolith Bollard provides clean, elegant lines to enhance any<br />
architectural style. This contemporary bollard is designed to stand at 1000mm<br />
above ground, with a 300mm securing root.<br />
At the forefront of design simplicity, the versatile and practical Simple 550 Cube<br />
is a dual purpose freestanding seat or bollard. For a smooth, comfortable finish, all<br />
corners and sides of the cube are chamfered and rounded off to eliminate angular<br />
edges. The unique base design allows the cube to be easily moved when required,<br />
using the appropriate equipment.<br />
Creating a calm and serene effect for urban schemes, the Simple 500/700 Spheres<br />
are elegantly rounded and available in 500mm and 700mm diameters, attaching to<br />
a fixing base via a spigot. All spheres are provided fully assembled for site installation.<br />
All <strong>Marshalls</strong> Street Furniture granite materials are sourced from the company’s<br />
principal supplier who complies to the ETI (Ethical Trading Initiative) Base Code and<br />
the Principles of Implementation.<br />
For details of the Simple 2000 contemporary and trestle benches refer to page 104.<br />
Coordinating items<br />
Colours<br />
Precise colour and surface texture should be judged from actual materials rather<br />
than photographic representations.<br />
Silver Grey<br />
Polished<br />
Mid Grey<br />
Fine Picked<br />
Polished Fine Picked<br />
Black<br />
Polished Fine Picked<br />
Pink<br />
Polished Fine Picked<br />
Light Beige<br />
Polished Fine Picked<br />
Dark Green<br />
Polished Fine Picked
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD03 <strong>Bollards</strong> Q50 190 Seating ........................... page 104<br />
Natural Stone <strong>Bollards</strong><br />
Simply Stone<br />
SIMPLE 150 MONOLITH BOLLARD<br />
SIMPLE 500 SPHERE<br />
500<br />
150<br />
300<br />
1000<br />
300<br />
SIMPLE 550 CUBE<br />
Diameter<br />
Product Colour Width Length HAG Weight<br />
Description (mm) (mm) (mm) (kg)<br />
Simple 150 Monolith Bollard See Swatch 150 1300 1000 88<br />
Simple 550 Cube See Swatch 550 550 550 493<br />
Simple 500 Sphere See Swatch 500 500 + 100 plinth 600 214<br />
Simple 700 Sphere See Swatch 700 700 + 122 plinth 822 560<br />
100 238<br />
SIMPLE 700 SPHERE<br />
Coordinating items<br />
700<br />
550<br />
550<br />
400<br />
550<br />
122 355<br />
550<br />
40<br />
40
41<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Cast Iron and Aluminium <strong>Bollards</strong><br />
MSF 102 Cast Iron Bollard with white tape<br />
Imperial Water Standpipe<br />
<strong>Marshalls</strong> Street Furniture offer a range of traditional cast iron bollards which allow<br />
you to either create or preserve a Victorian look within your landscape. All of our<br />
cast iron bollards are manufactured from ductile iron. Ductile iron retains all of cast<br />
iron’s qualities of machinability and corrosion resistance but has additional strength,<br />
toughness and ductility making it ideal for use as a bollard.<br />
All cast iron bollards are coated with a rust preventative primer and painted with a<br />
black gloss 9017 as standard. <strong>Bollards</strong> are also available in other RAL and BS colours<br />
as special order items.<br />
All our cast iron bollards are manufactured to BS EN 1563 1997.<br />
The following customised options are also available:<br />
Fixing Method: Root fixing is standard with the option of lift out and lockable fixing.<br />
Second Colour: Hand painted detailing and embellishments can be specified.<br />
Hazard Banding: Reflective tapes and discs can be added for increased visibility<br />
and safety.<br />
Crests, Logos and Coats of Arms: <strong>Marshalls</strong> can also personalise cast iron bollards<br />
with crests, logos and coats of arms on special request. These will be hand painted<br />
by our finishing team.<br />
The Imperial Bollard is cast in aluminium and can be coated in a colour of your choice.<br />
It is available as a standard bollard, a water standpipe and an electricity supply.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD04 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Cast Iron and Aluminium <strong>Bollards</strong><br />
MSF 101 STANDARD CANNON BOLLARD<br />
MSF 103 BOLLARD<br />
MSF 108 LARGE CANNON BOLLARD<br />
MSF 120 HENRY BOLLARD<br />
155Ø<br />
170Ø<br />
125Ø<br />
185Ø<br />
150Ø<br />
200Ø<br />
150Ø<br />
1200<br />
350<br />
800<br />
300<br />
1100<br />
300<br />
1025<br />
300<br />
Coordinating items<br />
Seating ........................... page 110<br />
Litter Bins ........................ page 207<br />
Planters ........................... page 263<br />
Tree Protection ................ page 273<br />
MSF 102 MANCHESTER 3 RING TOP BOLLARD<br />
MSF 105 HALF CANNON BOLLARD<br />
160Ø<br />
200Ø<br />
210Ø<br />
240Ø<br />
MSF 114 FLUTED BOLLARD WITH DISC TOP<br />
MSF 121 GEORGE BOLLARD<br />
200Ø<br />
200Ø<br />
155Ø<br />
Notice Boards .................. page 297<br />
Signage & Lamp Columns .. page 307<br />
Bandstands ..................... page 353<br />
1000<br />
300<br />
100Ø<br />
1000<br />
325<br />
1000<br />
300<br />
1000<br />
300<br />
42
43<br />
MSF 123<br />
MSF 131<br />
130Ø<br />
160Ø<br />
130Ø<br />
170 2<br />
IMPERIAL BOLLARD (ALUMINIUM) SHOWN AS WATER STANDPIPE<br />
765<br />
300<br />
960<br />
300<br />
1025<br />
325<br />
MSF 128<br />
OPTIONS<br />
Fixing Method Add Ons Utility Options<br />
Overall Lift Out<br />
Product Product Diameter Height HAG Weight Standard and Hazard Chain Water Electricity<br />
Description Reference (mm) (mm) (mm) (kg) Finish Lockable Banding Connectors Standpipe Supply<br />
Dome Top Bollard with One Decorative Ring MSF 101 170 1550 1200 49 Painted Black n n n<br />
Gloss 9017<br />
Semi Dome Top Bollard with Tapering MSF 102 200 1300 1000 42 Painted Black n n n<br />
Pillar and Two Decorative Rings Gloss 9017<br />
Semi Dome Top Bollard with Tapering Pillar MSF 103 185 1100 800 34 Painted Black n n n<br />
and One Decorative Ring Gloss 9017<br />
Exposed Cannon Ball Top Robust Bollard MSF 105 240 1325 1000 68 Painted Black n n n<br />
with Two Decorative Rings Gloss 9017<br />
Dome Top Robust Bollard with One MSF 108 200 1400 1100 68 Painted Black n n n<br />
Decorative Ring Gloss 9017<br />
Rounded Top Bollard with Tapering MSF 114 200 1300 1000 53 Painted Black n n n<br />
Fluted Pillar Gloss 9017<br />
Semi Dome Top Bollard with Pillar MSF 120 150 1325 1025 60 Painted Black n n n<br />
and One Decorative Ring Gloss 9017<br />
Exposed Cannon Ball Top Bollard with MSF 121 155 1300 1000 70 Painted Black n n n<br />
Tapering Pillar and Three Decorative Rings Gloss 9017<br />
Cannon Ball Top Robust Bollard with MSF 123 160 1065 765 38 Painted Black n n n<br />
Tapering Pillar Gloss 9017<br />
Dome Top Bollard with Two Slim Decorative Rings MSF 128 135 1250 950 65 Painted Black n n n<br />
Gloss 9017<br />
Cannon Ball Top Bollard with Circular Pillar MSF 131 170 1260 960 80 Painted Black n n n<br />
and Square Base Gloss 9017<br />
Locking Socket for Cast Iron Bollard MSF 39A 221 - - 10 Painted Black n<br />
Gloss 9017<br />
Semi Dome Top Bollard with Tapering Fluted Imperial 200 1350 1025 31 Painted Black n n n n<br />
Pillar and One Decorative Ring (Aluminium) Gloss 9017<br />
1025<br />
325<br />
135Ø<br />
1025<br />
325<br />
950<br />
300<br />
Door
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD05 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Cast Iron <strong>Bollards</strong><br />
Coordinating items<br />
Seating ........................... page 114 Litter Bins ........................ page 195<br />
CLASSIC CLASSIC 40 351<br />
CLASSIC 40 352<br />
CLASSIC 40 354<br />
STYLE STYLE 40 341<br />
STYLE 40 342<br />
STYLE 40 344<br />
CONTEMPORARY CONTEMPORARY 40 335 CONTEMPORARY 40 336<br />
OPTIONS<br />
Fixing Method Add Ons<br />
Overall Ground Concealed Lift Out<br />
Product Product Diameter Height HAG Weight Standard Post Base and Chain<br />
Description Reference (mm) (mm) (mm) (kg) Finish Fixing (H) Plate (E) Lockable (D) Connectors<br />
Classic 40.351 110 n/a 1150 37 Black Polyester Paint n n n n<br />
40.352 110 n/a 800 21 Black Polyester Paint n n n n<br />
40.354 110 n/a 600 18 Black Polyester Paint n n n n<br />
Style 40.341 120 n/a 1150 30 Black Polyester Paint n n n n<br />
40.342 120 n/a 800 19 Black Polyester Paint n n n n<br />
40.344 120 n/a 600 14 Black Polyester Paint n n n n<br />
Contemporary 40.335 140 n/a 800 24 Black Polyester Paint n n n<br />
40.336 140 n/a 600 19 Black Polyester Paint n n n<br />
*For full installation instructions please see page 397<br />
110Ø<br />
120Ø<br />
140Ø<br />
1150<br />
1150<br />
800<br />
110Ø<br />
120Ø<br />
140Ø<br />
800<br />
800<br />
600<br />
110Ø<br />
120Ø<br />
600<br />
600<br />
44
45<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Antony Gormley <strong>Bollards</strong><br />
Antony Gormley <strong>Bollards</strong>, Peckham High Street<br />
World-renowned British sculptor Antony Gormley became involved in a<br />
regeneration project local to his studio which was in the middle of the ‘Bellenden<br />
Renewal Area.’ The objective was to introduce pieces of art into the urban landscape,<br />
which would be both functional and enjoyable at the same time. Working with his<br />
foundry men, Hargreaves Foundry in Halifax, he decided to create further pieces<br />
inspired by his sculpture ‘Coat Peg.’ ‘Coat Peg’ was designed as part of the Tate’s<br />
1999 DIY project to get artist-designed objects into ordinary households. With<br />
this principal in mind three other pieces were designed that would be sculptural<br />
pieces in their own right, would enhance the urban environment and of course<br />
provide protection for those that used the road. Following some controversy over<br />
the designs, the project and the sculptured bollards were so popular that the local<br />
business people funded the improvements themselves.<br />
Speaking about the project Mr Gormley said, “I love cast iron for its strength and<br />
earthiness. I hope these simple forms will sit on the street confidently and be<br />
guardians of its two users, the pedestrians and the car. I look forward to them slowly<br />
popping up in the urban world like mushrooms in the night.”<br />
Each design stands at 1000mm above ground and weigh approximately 95<br />
kilograms. Each piece is individually numbered before it leaves the foundry and is<br />
accompanied by a certificate of authenticity.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD06 <strong>Bollards</strong> Q50 190<br />
<strong>Bollards</strong><br />
Antony Gormley<br />
No. 1 No. 2<br />
No. 3 No. 4<br />
240<br />
345<br />
1300<br />
1300<br />
Coordinating items<br />
HeIgHT<br />
Overall<br />
Product Product Diameter Height HAG Weight Standard<br />
Description Reference (mm) (mm) (mm) (kg) Finish<br />
Antony Gormley No. 1 240 1300 1000 95 Naturalised Cast Iron<br />
Antony Gormley No. 2 330 1300 1000 95 Naturalised Cast Iron<br />
Antony Gormley No. 3 345 1300 1000 95 Naturalised Cast Iron<br />
Antony Gormley No. 4 400 1300 1000 95 Naturalised Cast Iron<br />
330<br />
400<br />
1300<br />
1300<br />
46
47<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
PAS 68 Impact Tested <strong>Bollards</strong><br />
RhinoGuard 25/40, successfully impact tested using a 2.5 tone 4x4 at 40mph<br />
Following events in recent years, the threat of international terrorism in the UK has<br />
risen to unprecedented levels. International terrorist groups have stated their intent<br />
to deliberately target innocent people, with the aim of inflicting mass casualties,<br />
maximum damage and destruction.<br />
To combat these threats, the UK government has devised an integrated counter<br />
terrorism strategy to help ensure that the areas considered to be at greatest risk are<br />
appropriately safeguarded. A key element of this strategy is to reduce the threat of<br />
vehicle borne terrorism.<br />
The Agencies<br />
OSCT – The Office for Security and Counter-Terrorism leads the work on counter<br />
terrorism in the UK, working closely with the police and security services.<br />
NaCTSO – The National Counter Terror Security Office is a police unit co-located<br />
with the CPNI. NaCTSO work closely with the CPNI to provide advice and guidance<br />
on protecting ‘crowded places’ and reducing opportunities for terrorism through<br />
environmental design.<br />
CPNI – The Centre for the Protection of National Infrastructure provides integrated<br />
security advice, training and awareness on designing out vehicle borne terrorism.<br />
A key objective of the CPNI is to encourage the implementation of proportionate<br />
physical security measures to locations at potential risk. These are considered to<br />
be those which make up the critical national infrastructure (transport, emergency<br />
services and key utilities) and also any ‘crowded places’.<br />
It is of key importance to keep hostile vehicles (including Vehicle Borne Improvised<br />
Explosive Devices and ram raiding criminals) as far away from buildings and<br />
pedestrian areas as possible, through ‘designing in’ security measures to our streets<br />
and landscapes.<br />
By implementing these measures, we can create safe ‘stand off distances’ between<br />
vehicles and potential targets, which protect people and buildings in the event of<br />
an attack.<br />
BSI PAS 68<br />
The BSI PAS 68 standard, devised by the CPNI, specifies a performance classification for<br />
vehicle security barriers and their foundations, when subjected to a horizontal impact.<br />
BSI PAS 68 involves the physical impact testing of perimeter security products at<br />
varying speeds with different vehicle types. This ranges from medium sized saloon<br />
cars to large trucks travelling at various speeds, measuring the penetration of the<br />
load carrying part of the vehicle beyond the barrier.<br />
This enables businesses and organisations to make informed and proportionate<br />
decisions on protective security based on the levels of risk and vulnerability at a site,<br />
the traversability of the surrounding landscape and the overall project budget.<br />
It is only through specifying products successfully tested to PAS 68 that protective<br />
security can truly be assured, however this does not always mean that the highest<br />
specifications of PAS 68 protection are required.<br />
Depending on site specific conditions and access, it is often not physically possible<br />
for larger vehicles to reach the required speed to carry out a successful ram attack.<br />
In these cases, lower, more cost effective levels of security can be employed.
RhinoGuard <strong>Bollards</strong><br />
Designed to fulfil the needs of locations which do not necessarily require the highest<br />
specification of PAS 68 security, <strong>Marshalls</strong> has developed and successfully impact<br />
tested two new security bollards.<br />
Tested at the MIRA independent research facility, the RhinoGuard 15/30 and 25/40<br />
bollards, provide guaranteed impact performance at two distinct levels of protection<br />
and budget.<br />
RhinoGuard 15/30:<br />
n Successfully impact tested using a 1.5 tonne saloon car travelling at 30mph<br />
(48km/h).<br />
n The vehicle was brought to rest, immobilising it completely, making a second ram<br />
attempt impossible.<br />
n Designed for areas which are either at lower risk of a vehicle borne attack or have<br />
tighter vehicle access.<br />
n Provides the ideal solution for a wide range of applications which previously would<br />
have used a generic, untested ‘anti ram’ specification, including retail parks, garage<br />
forecourts and supermarkets.<br />
RhinoGuard 25/40:<br />
n Successfully impact tested using a 2.5 tonne 4x4 utility vehicle travelling at 40mph<br />
(64 km/h).<br />
n The vehicle was brought to a complete stop, with zero penetration beyond the<br />
point of the bollard.<br />
n Designed for sites which are at moderate risk of an attack, and where a medium<br />
sized vehicle could reach considerable speed. This includes rail stations, sports<br />
stadia, shopping centres, ports and public realm projects.<br />
STAINLESS STEEL<br />
STEEL FERROCAST (Example Styles)<br />
*Sleeves shown apply to RhinoGuard 15/30 bollard<br />
The RhinoGuard 15/30, successfully stopped a 1.5 tone car at 30mph<br />
Sleeve Options<br />
RhinoGuard bollard cores are tested so that they can be finished in a variety of<br />
standard cosmetic sleeve designs in steel and stainless steel, to meet the requirements<br />
of any project.<br />
The standard styles shown to the left apply to the RhinoGuard 15/30 bollard; however<br />
the same options are also available for the RhinoGuard 25/40, in larger diameters.<br />
Standard Sleeve Diameters:<br />
RhinoGuard 15/30 - Steel: 168mm<br />
- Stainless Steel: 129mm<br />
RhinoGuard 25/40 - Steel: 194mm<br />
- Stainless Steel 204mm<br />
Bespoke Design<br />
A fully bespoke design service is also available for RhinoGuard<br />
bollards specified in Ferrocast polyurethane.<br />
This service enables clients to specify bollards in any style to<br />
complement any landscape and meet exact project requirements. <strong>Bollards</strong> can be<br />
designed to recreate existing traditional themes, ideal for heritage sites, or to create<br />
a more unique contemporary styling.<br />
Examples of some of the styles which can be achieved are shown to the left<br />
(Manchester, Westminster and Waterside styles shown).<br />
Please contact our sales order office for more information on our bespoke design<br />
service for RhinoGuard bollards.<br />
48
49<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Static <strong>Bollards</strong><br />
Steel<br />
RB 111 Steel <strong>Bollards</strong> with yellow banding on Tegula block paving in Traditional and Pennant Grey, Harrop Fold High School, Salford<br />
Rhino static steel bollards provide security to any landscape. The exceptional<br />
strength of steel makes it ideal for ram-raid deterrence, protected parking and the<br />
demarcation of pedestrian walkways.<br />
Manufactured to the highest standard, Rhino steel bollards are hot dip galvanised<br />
to BS EN ISO 1461 (1999). <strong>Bollards</strong> are polyester powder coated in RAL black 9005<br />
as standard, and can be specified to match almost any British Standard or RAL colour<br />
if required.<br />
Specification options<br />
Dependent on the level of protection required, a number of specification options<br />
are available:<br />
Standard: Standard steel bollards are exceptionally strong and will not fracture<br />
on impact.<br />
Anti Ram: For increased internal strength, a steel joist can be added. This makes the<br />
bollards ideal for ram raid deterrence and preventing any vehicles from penetrating<br />
beyond the bollard.<br />
Fixing Options<br />
Root Fixing: Rhino 1000mm bollards are supplied with a 500mm root depth as<br />
standard, which is to be placed underground and secured using concrete. A cross<br />
bar keys into the concrete for added strength, ensuring that the bollard cannot<br />
be moved or twisted. A variety of heights are available, however the required root<br />
depths will differ based on the option selected. Specific lengths are also available<br />
on request.<br />
Base Plate: <strong>Bollards</strong> can be supplied complete with an integral base fixing plate<br />
which is attached to the ground using bolts. This option is ideal for applications<br />
where ground excavation is not an option.<br />
Lift out and Lockable: Removable bollards allow temporary vehicle access and can<br />
be replaced when works are complete.<br />
Customisation Options<br />
Hazard Banding<br />
• Rhino <strong>Bollards</strong> are available with an option of Class 2 reflective banding for<br />
increased visibility and safety.<br />
• Banding is available in a choice of three standard colour options; Amber, red and<br />
white. Additional colours are available on request.<br />
Chain Connectors: Allows a chain to be fixed to the bollards to form sections that<br />
cannot be opened.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD10 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Static <strong>Bollards</strong><br />
Steel<br />
RB 101<br />
Flat Cap<br />
version available<br />
ex-stock<br />
RB 109<br />
RB 119<br />
RB 150<br />
Also available<br />
ex-stock<br />
114 x 1500<br />
97<br />
150<br />
28<br />
1000<br />
500<br />
168Ø<br />
1000<br />
500<br />
168Ø<br />
1000<br />
500<br />
168Ø<br />
1000<br />
500<br />
168Ø<br />
STOCK<br />
STOCK<br />
RB 105<br />
RB 111<br />
RB 123<br />
LEEDS BOLLARD<br />
Coordinating items<br />
Traffic Management ......... page 368<br />
50<br />
28<br />
28<br />
1000<br />
500<br />
168Ø<br />
1000<br />
500<br />
168Ø<br />
1000<br />
500<br />
168Ø<br />
STOCK<br />
50
51<br />
AQUARIUS WATER STANDPIPE BOLLARD<br />
950<br />
350<br />
140Ø<br />
The Aquarius Water Standpipe bollard has a lockable access door behind which is a<br />
stop valve in line with the external BSP tap with ¾” or ½” hose tail.<br />
Product<br />
Description<br />
Semi dome top<br />
plain bollard<br />
Semi dome top<br />
double ring<br />
bollard<br />
Semi dome<br />
single indent<br />
bollard<br />
Semi dome<br />
double indent<br />
bollard<br />
Flat top large<br />
indent bollard<br />
Product<br />
Reference<br />
Diameter<br />
(mm)<br />
Overall<br />
Height<br />
(mm)<br />
ACKROYD STUART ASHTRAY BOLLARD<br />
1000<br />
350<br />
154Ø<br />
152.5Ø<br />
The Ackroyd Stuart Ashtray Bollard has a front filling cigarette end collector, stainless<br />
steel stubber plate and lockable hinged top to allow emptying. The bollard can have<br />
more than one stub plate and can also be used as anti-ram.<br />
OPTIONS<br />
Height Optional Heights Cap Fixing Method Spec Finish Add Ons<br />
HAG<br />
(mm)<br />
Weight<br />
(kg)<br />
Standard Finish Length<br />
1250/<br />
HAG 900<br />
(mm)<br />
Length<br />
1800/<br />
HAG 1200<br />
(mm)<br />
Flat Cap Separate<br />
Cap<br />
Base<br />
Plate<br />
Lift Out &<br />
Lockable**<br />
Anti<br />
Ram<br />
Galv.<br />
Only<br />
Hazard<br />
Banding<br />
RB 101 114 1500 1000 20 PC Black 9005 n n n n n n n n n n<br />
RB 101 139 1500 1000 25 PC Black 9005 n n n n n n n n n n<br />
RB 101 168 1500 1000 30 PC Black 9005 n n n n n n n n n n<br />
RB 101 194 1500 1000 40 PC Black 9005 n n n n n n n n n<br />
RB 105 114 1500 1000 20 PC Black 9005 n n n n n n n n n n<br />
RB 105 139 1500 1000 25 PC Black 9005 n n n n n n n n n n<br />
RB 105 168 1500 1000 30 PC Black 9005 n n n n n n n n n n<br />
RB 105 194 1500 1000 40 PC Black 9005 n n n n n n n n n<br />
RB 109 114 1500 1000 20 PC Black 9005 n n n n n n n n n n<br />
RB 109 139 1500 1000 25 PC Black 9005 n n n n n n n n n n<br />
RB 109 168 1500 1000 30 PC Black 9005 n n n n n n n n n n<br />
RB 109 194 1500 1000 40 PC Black 9005 n n n n n n n n n<br />
RB 111 114 1500 1000 20 PC Black 9005 n n n n n n n n n n<br />
RB 111 139 1500 1000 25 PC Black 9005 n n n n n n n n n n<br />
RB 111 168 1500 1000 30 PC Black 9005 n n n n n n n n n n<br />
RB 111 194 1500 1000 40 PC Black 9005 n n n n n n n n n<br />
RB 119 114 1500 1000 20 PC Black 9005 n n n n n n n n n n<br />
RB 119 139 1500 1000 25 PC Black 9005 n n n n n n n n n n<br />
RB 119 168 1500 1000 30 PC Black 9005 n n n n n n n n n n<br />
RB 119 194 1500 1000 40 PC Black 9005 n n n n n n n n n<br />
Mitre top bollard RB 123 114 1500 1000 20 PC Black 9005 n n n n n n n n<br />
RB 123 139 1500 1000 25 PC Black 9005 n n n n n n n n<br />
RB 123 168 1500 1000 30 PC Black 9005 n n n n n n n n<br />
RB 123 194 1500 1000 40 PC Black 9005 n n n n n n n<br />
Flat top bollard<br />
with single DDA<br />
band<br />
Leeds Bollard Leeds<br />
Bollard<br />
Ackroyd Stuart<br />
Ashtray Bollard<br />
Aquarius Water<br />
Standpipe Bollard<br />
RB 150 114 1500 1000 20 PC Black 9005 n n n n n n<br />
RB 150 139 1500 1000 25 PC Black 9005 n n n n n n<br />
RB 150 168 1500 1000 30 PC Black 9005 n n n n n n<br />
RB 150 194 1500 1000 40 PC Black 9005 n n n n n<br />
*Bold text indicates standard bollard option<br />
** Lift and Lockable option available dependant on diameter<br />
140 1300 1000 25 PC Grey 706 n<br />
154 1350 1000 PC Black 9017 n n n<br />
140 1300 950 25 Optional Colour<br />
PC Finish<br />
n<br />
Chain<br />
Connectors
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD11 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Steel <strong>Bollards</strong><br />
CLASSIC TOP 40.211<br />
MODERN TOP 40.221<br />
89Ø<br />
89Ø<br />
1000<br />
300<br />
1000<br />
300<br />
CONTEMPORARY TOP 40.231<br />
STAINLESS STEEL TOP 40.501A<br />
Coordinating items<br />
Seating ........................... page 149<br />
Litter Bins ........................ page 195<br />
Cycle Parking ................... page 225<br />
Tree Protection ................ page 278<br />
Protective Barriers ........... page 323<br />
Post and Rail .................... page 332<br />
OPTIONS<br />
Height Fixing Method<br />
Product Product Diameter Overall Height HAG Weight Standard Lift Out<br />
Description Reference (mm) (mm) (mm) (kg) Finish and Lockable<br />
Classic Top Bollard 40.211 89 1300 1000 8.5 PC Body Met Grey/Top 8019 n<br />
40.218 89 1100 800 7 PC Body Met Grey/Top 8019 n<br />
Modern Top Bollard 40.221 89 1300 1000 8.5 PC Body Met Grey/Top 6028 n<br />
40.228 89 1100 800 7 PC Body Met Grey/Top 6028 n<br />
Contemporary Top Bollard 40.231 89 1300 1000 8.5 PC Body Met Grey/Top 5011 n<br />
40.238 89 1100 800 7 PC Body Met Grey/Top 5011 n<br />
Stainless Steel Top Bollard 40.501A 89 1100 800 8 PC Black 100 Sable/Polished Stainless Steel Cap n<br />
40.502A 89 900 600 6.5 PC Black 100 Sable/Polished Stainless Steel Cap n<br />
NB. Classic, Contemporary and Modern tops are available with bodies and tops in any standard RAL or Sable colour<br />
89Ø<br />
89Ø<br />
1000<br />
300<br />
800<br />
300<br />
52
53<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Stainless Steel <strong>Bollards</strong><br />
RS 001 <strong>Bollards</strong>, Galleries Retail Park, Washington<br />
Rhino stainless steel static bollards provide perimeter protection whilst also adding<br />
contemporary style and elegance to the surrounding landscape. <strong>Bollards</strong> are<br />
available in a number of modern styles, with each bollard available in a variety of<br />
length and diameter options.<br />
Rhino stainless steel bollards are manufactured from a carefully selected grade<br />
of 316L stainless steel (1.4401). Exceptionally strong and requiring very little<br />
maintenance, they are ideal for a wide variety of applications including pedestrian<br />
walkways and areas of protected parking.<br />
The use of grade 316L (1.4401) stainless steel offers a number of significant<br />
advantages:<br />
Higher resistance to corrosion: Whilst stainless steel is corrosion resistant, the<br />
naturally forming chromium rich oxide film that protects it can be broken down<br />
over time by chlorine and chlorides. However, due to the increased levels of nickel<br />
in its alloy structure, grade 316L (1.4401) has a much higher resistance to corrosion.<br />
Greater resistance to pitting and staining: In comparison with other grades of<br />
stainless steel, grade 316L (1.4401) is less susceptible to surface pitting.<br />
Low Maintenance: As a result of its quality, grade 316L (1.4401) requires very little<br />
maintenance to retain its original appearance. This means that the material provides<br />
attractive ‘life cost’ benefits when compared to alternatives, such as carbon steels.<br />
Recyclable: Stainless steel is 100% recyclable. Around 90% of stainless steel is<br />
made from recycled scrap. Due to this, stainless steel has much less of an impact on<br />
the environment and scarce resources, providing an all round “Green” material for<br />
architects to specify.<br />
Specification options<br />
Rhino Stainless Steel Static bollards are available with a variety of specification<br />
options to meet the requirements of any application:<br />
Standard: Ideal for demarcation purposes, standard bollards provide visual<br />
separation between vehicle and pedestrian areas. Standard Rhino stainless steel<br />
bollards feature a 2mm wall thickness, with the exception of the M3 Flat and Mitre<br />
top bollards, which feature a greater 6mm thick wall for increased strength.<br />
Reinforced: A galvanised steel tube is added for increased internal strength.<br />
Suitable for areas where there is a higher risk to pedestrians or premises from<br />
moving vehicles.<br />
Anti Ram: Reinforced with two internal steel tubes to further increase the strength<br />
of the bollard. This specification is ideal for ram-raid deterrence and preventing<br />
vehicles from penetrating beyond the bollard.<br />
Reinforced Anti Ram: <strong>Bollards</strong> are reinforced with three mild steel tubes for areas<br />
requiring maximised ram-raid protection.<br />
Fixing Options:<br />
Root Fixing: Rhino 1000mm bollards are supplied with a 500mm root depth as<br />
standard, with the exception of the 114mm diameter RS 001 bollard, which has a<br />
300mm root. The root is placed underground and secured using concrete. A cross<br />
bar keys into the concrete for added strength, ensuring that the bollard cannot be<br />
moved or twisted. Differing heights are also available, however the required root<br />
depths differ dependent on the option selected. Specific lengths are also available<br />
on request.<br />
Base Plate: <strong>Bollards</strong> can be supplied complete with an integral base fixing plate<br />
which is attached to the ground using bolts. This option is ideal for applications<br />
where ground excavation is not an option.<br />
Lift out and Lockable: Removable bollards allow temporary vehicle access and can<br />
be replaced when works are complete.<br />
Please refer to page 56 for customisation and finish options.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD07 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Stainless Steel <strong>Bollards</strong><br />
RS 001 RS 002<br />
RS 004<br />
RS 007<br />
114Ø<br />
114Ø<br />
129Ø<br />
1000<br />
300<br />
1000<br />
500<br />
1000<br />
500<br />
STOCK<br />
Also available with a 500mm root depth<br />
RS 005<br />
RS 150<br />
Coordinating items<br />
Traffic Management ......... page 368<br />
114Ø<br />
114Ø<br />
150<br />
114Ø<br />
114Ø<br />
1000<br />
500<br />
1000<br />
500<br />
1000<br />
500<br />
54
55<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD07 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Static <strong>Bollards</strong><br />
Stainless Steel<br />
M3 FLAT TOP BOLLARD<br />
Product Description Product<br />
Reference<br />
Diameter<br />
(mm)<br />
Overall<br />
Height<br />
(mm)<br />
1000<br />
500<br />
114Ø<br />
M3 MITRE TOP BOLLARD<br />
OPTIONS<br />
Coordinating items<br />
Shown with yellow reflective bands 1200mm option also available<br />
Shown with<br />
base plate<br />
1200mm option also available<br />
Semi dome top SS<br />
bollard<br />
Semi dome top<br />
engraved bollard<br />
Height Length Specification Fixing Method Optional Extras Utility Options<br />
HAG<br />
(mm)<br />
Weight<br />
(kg)<br />
Standard<br />
Finish<br />
Length<br />
1250<br />
HAG<br />
900<br />
Length<br />
1800<br />
HAG<br />
1200<br />
Reinforced Anti<br />
Ram<br />
Lift Out &<br />
Lockable<br />
Base<br />
Plate<br />
Hazard<br />
Banding<br />
1000<br />
500<br />
Stainless<br />
Steel Bezel<br />
RS001 101 1500 1000 8 Brushed Satin n n n n n n<br />
RS001 † 114 1300 1000 9 Brushed Satin n n n n n n n n<br />
RS001 129 1500 1000 10 Brushed Satin n n n n n n n n<br />
RS001 154 1500 1000 12 Brushed Satin n n n n n n n<br />
RS002 114 1500 1000 9 Brushed Satin<br />
n/a n n n n<br />
Mitre top ss bollard RS004 101 1500 1000 8 Brushed Satin n n n n n n n<br />
RS004 114 1500 1000 9 Brushed Satin n n n n n n n<br />
RS004 129 1500 1000 10 Brushed Satin n/a n n n n n n<br />
RS004 154 1500 1000 12 Brushed Satin n/a n n n n n n<br />
Flat top SS bollard RS005 114 1500 1000 9 Brushed Satin n n n n<br />
114Ø<br />
Water<br />
Standpipe<br />
Flat top matt band SS RS007 101 1500 1000 8 Bright Polish n/a n<br />
bollard<br />
RS007 114 1500 1000 9 Bright Polish n n<br />
RS007 129 1500 1000 10 Bright Polish n/a n<br />
RS007 154 1500 1000 12 Bright Polish n/a n<br />
Flat top Bollard with RS150 101 1500 1000 7 Brushed Satin n n n n n n<br />
single DDA Band<br />
RS150 114 1500 1000 9 Brushed Satin n n n n n n<br />
RS150 129 1500 1000 12 Brushed Satin n n n n n n<br />
RS150 154 1500 1000 15 Brushed Satin n n n n n n<br />
M3 Flat Top SS Bollard 89 1500 1000 9 Brushed Satin n n<br />
114 1500 1000 10 Brushed Satin n n n n<br />
168 1500 1000 16 Brushed Satin n n n<br />
M3 45 Mitre top SS<br />
bollard<br />
† RS001 with 114mm diameter is also available with a total length of 1500mm.<br />
Products in bold text indicate standard option.<br />
89 1500 1000 8 Brushed Satin n n<br />
114 1500 1000 9 Brushed Satin n n n n<br />
168 1500 1000 15 Brushed Satin n n n<br />
Electrical<br />
Supply
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD08 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Static <strong>Bollards</strong><br />
Stainless Steel<br />
FINISHES<br />
Finishes<br />
n Rhino stainless steel static bollards are supplied with a satin polished finish<br />
with the exception of the RS 007, which is supplied with a bright polished<br />
finish and two etched bands.<br />
REFLECTIVE BANDS<br />
Hazard Banding: For increased visibility and safety.<br />
n Rhino stainless steel bollards are available with an option of Class Ref 2<br />
reflective hazard banding for increased visibility and safety.<br />
n Banding is available in a choice of three standard colour options; amber, red<br />
and white. For additional options, please contact our sales office.<br />
BESPOKE BRANDING<br />
BEZEL<br />
Coordinating items<br />
Bespoke Branding<br />
n Stainless steel bollards are now available with the option of bespoke branding,<br />
machine engraved into the top. This enables you to fully customise your<br />
scheme with a logo, crest or emblem of your choice. Bespoke branding can be<br />
supplied unpainted or in full colour, to meet your individual requirements.<br />
Stainless Steel Bezel<br />
n Stainless steel bezels are available in a brushed satin finish in standard<br />
diameters.<br />
n The bezel is ideal for applications where the bollards are installed into existing<br />
paving, ensuring that any gaps or cracking caused during installation are<br />
completely hidden from view.<br />
56
57<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD09 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Stainless Steel <strong>Bollards</strong><br />
MACHINED TOP 40.501<br />
MACHINED TOP 40.503<br />
89Ø<br />
800<br />
300<br />
219Ø<br />
STOCK<br />
600<br />
200<br />
MACHINED TOP 40.502<br />
MACHINED TOP 40.504<br />
Coordinating items<br />
Seating ........................... page 151<br />
Litter Bins ........................ page 195<br />
Cycle Parking ................... page 225<br />
OPTIONS<br />
Height Fixing Method<br />
Overall<br />
Product Product Diameter Height HAG Weight Standard Base Plate Lift Out<br />
Description Reference (mm) (mm) (mm) (kg) Finish and Lockable<br />
Sineu Graff Machined Top Stainless Steel Bollard 40.501 89 1100 800 8 Polished Top/Shot Peened Body n n<br />
Sineu Graff Machined Top Stainless Steel Bollard 40.502 89 900 600 7 Polished Top/Shot Peened Body n n<br />
Sineu Graff Wide Machined Top Stainless Steel Bollard 40.503 219 800 600 17 Polished Top/Shot Peened Body n n<br />
Sineu Graff Wide Machined Top Stainless Steel Bollard 40.504 219 600 400 13 Polished Top/Shot Peened Body n n<br />
89Ø<br />
600<br />
300<br />
219Ø<br />
400<br />
200
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
RT SS5 stainless steel telescopic bollards, Borehamwood<br />
Specification<br />
Rhino Telescopic <strong>Bollards</strong> are available in steel, stainless steel and polyurethane:<br />
Steel: <strong>Bollards</strong> can be supplied in a galvanised or powder coated finish. All steel<br />
products are hot dip galvanised to BS EN ISO 1461 (1999). Powder coating is available<br />
in most RAL or British Standard colours.<br />
Stainless steel: <strong>Bollards</strong> are manufactured in high quality grade 316 (1.4401) austenitic<br />
steel for maximised durability.<br />
Polyurethane: <strong>Bollards</strong> are made from Ferrocast, <strong>Marshalls</strong>’ two part polymer set<br />
around an internal steel core. Polyurethane bollards can also be supplied in a full range<br />
of colours.<br />
See page 63 for banding options.<br />
Installation, maintenance and replacement components<br />
Full Installation: Available on selected schemes.<br />
Repair or Full Service: Option available for all products.<br />
Locks and Keys<br />
Master Key Facilities: Locks can be keyed alike or to differ.<br />
Anti-tamper locking mechanism: Selected bollards feature a 10 pin ‘anti-drill’<br />
push button lock.<br />
Overnight Service: Replacement of lost keys.<br />
Coordinating items<br />
Rhino Telescopic Security Posts provide a secure, simple and cost effective method of<br />
protecting premises and vehicles. Rhino posts can be located in forecourts, car parks or<br />
shop fronts to provide excellent levels of protection. Fully retractable, the bollards can<br />
be lifted out of the ground in seconds and lowered just as easily.<br />
The bollards lock into their upright position with an integral high security push button<br />
lock. When the posts are not required, they simply slide into their host tube below<br />
ground and the steel flap is closed flush.<br />
As a result of the continuing trend towards products offering maximum protection<br />
and security, Rhino now offer their reinforced anti-ram specification as standard<br />
throughout the entire commercial telescopic bollard range. For applications which do<br />
not require this level of security, non reinforced equivalents are available. Coordinating<br />
static posts are also available on request.<br />
Selected bollards are now available with a lift assist mechanism. Lift assisted bollards<br />
are fitted with an internal gas spring, which helps to reduce the operating weight by<br />
approximately 70%. The mechanism enables the bollards to be lifted effortlessly into<br />
place and gently lowered with a smooth, cushioned descent. The Rhino gas spring<br />
and surrounding body is manufactured from a grade 316L stainless steel, meaning<br />
that it will not rust or corrode, thus minimising ongoing maintenance costs.<br />
Rhino telescopic bollards are manufactured using an automated robot welding<br />
process for greater precision and accuracy. Our products are quality checked at each<br />
stage of manufacture to ensure they are always of the highest quality.<br />
Sold Secure<br />
The Sold Secure organisation is dedicated to reducing the risk of<br />
crime through assessing the performance of security products.<br />
Established in 1992 by Northumbria and Essex Police with the<br />
backing of the Home Office, Sold Secure is now administered by<br />
the Master Locksmiths Association.<br />
Selected telescopic bollards have been independently tested and<br />
certified by Sold Secure to the ‘Automotive Gold’ standard and are<br />
suitable for inclusion in the Sold Secure Approved Category List.<br />
The accreditation is awarded in reference to the Rhino 10 pin ‘anti-drill’ push button<br />
locking mechanism, which is used on selected bollards throughout the telescopic<br />
bollard range.<br />
Secured by Design<br />
Secured by Design is a UK Police Flagship initiative,<br />
supporting the principles of designing out crime,<br />
crime prevention and security standards for a range<br />
of applications.<br />
Managed by the association of Chief Police Officers Crime Prevention Initiatives<br />
(ACPO CPI), Secured by Design guarantees police approval of accredited security<br />
products. <strong>Marshalls</strong> Street Furniture is a Secured by Design Accredited Organisation.<br />
58
59<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
Domestic<br />
RT RD4 SS Domestic Telescopic Bollard with single white band<br />
RT RD4 RT RD4 SS<br />
Stainless Steel<br />
lifting handle<br />
10 pin push<br />
button lock<br />
76mm round<br />
section x 4mm<br />
gauge mild steel<br />
6mm gauge<br />
mild steel lid<br />
100mm square<br />
section 4mm<br />
gauge mild steel<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
76Ø<br />
500<br />
100 2<br />
700<br />
Coordinating items<br />
Designed predominantly for domestic applications, Rhino domestic telescopic<br />
bollards are ideal for driveway installations to restrict access to properties and<br />
protect parked vehicles.<br />
RT RD4<br />
n A round telescopic bollard which locks securely into place with a 500mm height<br />
above ground and features a 76mm diameter.<br />
n Manufactured from mild steel to BS 1440, it is galvanised to BS EN ISO 1461 (1999)<br />
providing increased resistance to rust and corrosion.<br />
n The RT RD4 is supplied polyester powder coated in either RAL Black 9005 or<br />
Yellow 1021 as standard. Other RAL colours are also available on request.<br />
n A coordinating static post (Ref: RS D4) is also available<br />
RT RD4 SS<br />
n A round telescopic bollard manufactured from a carefully selected grade of<br />
316L (1.4401) stainless steel.<br />
n Exceptionally strong and requiring little maintenance, the RT RD4 SS offers a secure,<br />
durable and contemporary solution for domestic applications.<br />
n The RT RD4 SS is 500mm high when extended above ground and has a<br />
76mm diameter.<br />
n A coordinating static post is also available (Ref: RS001 D4).<br />
Stainless steel<br />
lifting handle<br />
10 pin push<br />
button lock<br />
76mm round<br />
section x 3mm<br />
stainless steel<br />
6mm gauge<br />
mild steel lid<br />
100mm square<br />
section 4mm<br />
gauge mild steel<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
76Ø<br />
500<br />
100 2<br />
700
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
RT R8 HD telescopic bollards, Peugeot garage<br />
RT R8 HD RT SQ8 HD<br />
Stainless steel<br />
lifting handle<br />
10 pin ‘anti drill’<br />
push button lock<br />
90mm round<br />
section x 5mm<br />
gauge mild steel<br />
76.1mm x 2mm<br />
gauge internal<br />
post sleeve<br />
reinforcement<br />
6mm gauge<br />
mild steel lid<br />
120mm square<br />
section 3mm<br />
gauge mild steel<br />
high grade S355<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
90Ø<br />
120 2<br />
670<br />
950<br />
Coordinating items<br />
Rhino commercial telescopic bollards are supplied with our heavy duty specification<br />
as standard, making them ideal for anti ram raid applications. For applications requiring<br />
a lower level of security, non reinforced bollards are also available.<br />
The RT R8 HD and RT SQ8 HD are manufactured from mild steel to BS 1440 and are<br />
galvanised to BS EN ISO 1461 (1999).<br />
Designed for commercial usage, the bollards are ideal for providing ram raid<br />
protection to garage forecourts, driveways and pedestrian zones, town centres and<br />
commercial entrances.<br />
The bollards feature a 10 pin ‘anti-drill’ push button lock for added security.<br />
RT R8 HD<br />
n A round telescopic bollard with a height above ground of 670mm and a 90mm<br />
diameter.<br />
n The bollard is reinforced with a high strength inner post sleeve, manufactured<br />
from 76.1mm x 2mm steel, for increased performance on impact.<br />
n A non reinforced option (Ref: RT R5) is available on request for lower risk<br />
applications. A coordinating static post is also available (Ref: RSP R8).<br />
RT SQ8 HD<br />
n A square telescopic bollard with a height of 670mm and a 90mm x 90mm width.<br />
n As with the RT R8 HD, the SQ8 HD is reinforced with an inner post sleeve for added<br />
impact performance.<br />
n A non reinforced option (Ref: RT SQ5) is available on request for lower risk<br />
applications. A matching static post is also available (RSP SQ8).<br />
Stainless steel<br />
lifting handle<br />
10 pin ‘anti drill’<br />
push button lock<br />
90mm square<br />
section x 5mm<br />
gauge mild steel<br />
76.1mm x 2mm<br />
gauge internal<br />
post sleeve<br />
reinforcement<br />
6mm gauge<br />
mild steel lid<br />
120mm square<br />
section 3mm<br />
gauge mild steel<br />
high grade S355<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
90 2<br />
120 2<br />
670<br />
950<br />
60
61<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
RT SS5 telescopic bollards, BMW/Mini garage, Borehamwood<br />
RT SS5<br />
n A round telescopic bollard manufactured from grade 316L (1.4401) stainless steel.<br />
n The bollard rises to 710mm above ground and features a 101mm diameter.<br />
n Supplied with a brushed satin finish, the exceptionally strong stainless steel outer<br />
is 2mm thick and is reinforced with a 90mm x 5mm steel internal post sleeve for<br />
added performance.<br />
n A co-ordinating post (SSB01) is available on request.<br />
n The RT SS5 features a 10 pin push button lock for added security.<br />
RT SS5 Lift Assist<br />
n The RT SS5 is available with an internal lift assist mechanism to<br />
significantly reduce the operating weight and aid manual handling.<br />
n The bollard is fitted with an internal gas spring, which reduces the lifting weight to<br />
around one third of that of its standard equivalent.<br />
n The Rhino gas spring is manufactured from stainless steel, which means that it<br />
will not rust or corrode like some steel equivalents, thus minimising ongoing<br />
maintenance costs.<br />
RT SS5<br />
Coordinating items<br />
Stainless steel locking cylinder<br />
and lifting handle<br />
10 pin push<br />
button lock<br />
90 x 5mm<br />
gauge internal<br />
post sleeve<br />
reinforcement<br />
101mm diameter<br />
x 2mm wall<br />
316 brushed<br />
stainless steel<br />
6mm gauge<br />
mild steel lid<br />
120mm square<br />
section 3mm<br />
gauge mild steel<br />
base post<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
101Ø<br />
120 2<br />
710<br />
1000
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
RT 114/670 HD<br />
n A round telescopic bollard manufactured from high strength mild steel to<br />
BS 1440 and galvanised to BS EN ISO 1461 (1999).<br />
n The bollard locks into place 670mm above ground and features a larger<br />
114mm diameter.<br />
n Features a 10 pin ‘anti drill’ push button lock for added security.<br />
n The RT 114/670 HD is reinforced with a 101mm x 4mm steel inner post sleeve for<br />
enhanced performance on impact, making the bollard ideal for high risk anti ram<br />
applications.<br />
n Supplied galvanised as standard, the RT 114/670 HD can be polyester powder<br />
coated to a RAL colour of your choice.<br />
RT 114/670 HD Lift Assist<br />
n The RT 114/670 HD is available with an internal lift assist<br />
mechanism to substantially reduce the operating weight and aid<br />
manual handling.<br />
n This stainless steel gas spring reduces the lifting weight by approximately 70%,<br />
from 22.5kg to around 6-7kg.<br />
RT R14 HD<br />
n A round telescopic bollard manufactured from high strength mild steel to BS 1440<br />
and galvanised to BS EN ISO 1461 (1999).<br />
n The RT R14 HD has a height above ground of 850mm and diameter of 114mm.<br />
n Features a 10 pin ‘anti drill’ push button lock for added security.<br />
n The bollard is reinforced as standard with a 101 x 4mm internal post sleeve for<br />
added strength and security, making it the ideal choice for anti ram applications.<br />
n A non reinforced option is also available for applications of lower risk (Ref: RT R14).<br />
A coordinating static post (Ref: RB 114) is available on request.<br />
RT R14 HD Lift Assist<br />
n The RT R14 HD is now available with a lift assist mechanism.<br />
This enables the specification of a telescopic bollard of significant<br />
size and operating weight, whilst reducing the lifting weight by<br />
approximately 70%, enabling effortless functionality.<br />
n The internal gas spring reduces the operating weight from 26.5kg to around 7kg.<br />
RT 114 / 670 HD<br />
RT R14 HD<br />
Coordinating items<br />
Stainless steel<br />
lifting handle<br />
10 pin ‘anti drill’<br />
push button lock<br />
114mm round<br />
section x 5mm<br />
gauge mild steel<br />
101 x 4mm<br />
gauge internal<br />
post sleeve<br />
reinforcement<br />
6mm mild<br />
steel lid<br />
140mm square<br />
section x 5mm<br />
gauge mild steel<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
Stainless steel<br />
lifting handle<br />
10 pin ‘anti drill’<br />
push button lock<br />
114mm round<br />
section x 5mm<br />
gauge mild steel<br />
101 x 4mm<br />
gauge internal<br />
post sleeve<br />
reinforcement<br />
6mm mild<br />
steel lid<br />
140mm square<br />
section x 5mm<br />
gauge mild steel<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
114Ø<br />
140 2<br />
114Ø<br />
140 2<br />
670<br />
960<br />
850<br />
1125<br />
62
63<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
Ferrocast<br />
The RT SU5 Sunderland bollard is a telescopic post manufactured from Ferrocast<br />
Polyurethane. The bollard rises to 730mm above ground and has a 135mm diameter.<br />
A coordinating static bollard (Sunderland Low) is also available.<br />
Ferrocast bollards are manufactured from high quality polyurethane and cast around<br />
an internal steel core for increased strength. The strong, non ferrous exterior ensures<br />
that the bollards will not rust or corrode, thus minimising ongoing maintenance costs.<br />
Optional Extras<br />
Banding Options<br />
Rhino commercial telescopic bollards are available with a choice of three standard<br />
banding options:<br />
n Single Band: A single recessed 100mm band supplied with Class 2 reflective tape.<br />
Available in either one or two colours.<br />
n Double Band: Two recessed bands supplied with Class 2 reflective tape.<br />
n Hazard Banding Strip: For increased visibility and safety.<br />
Banding is available in three standard colours; amber, red and white. For additional<br />
options, please contact our sales office.<br />
Security Options<br />
Square security cover - To add further security to your bollard, a square security cover<br />
is available. The cover is suitable for use on the RT SQ8 HD and its non-reinforced<br />
equivalent (RT SQ5). The cover is 100mm x 100mm.<br />
Ornamental Locking Top - Suitable for use on the RT R8 HD telescopic bollard<br />
and its non reinforced equivalent (RT R5), the Ornamental Locking Top provides a<br />
traditional finish to the bollard, whilst providing the added security of a second locking<br />
mechanism. The cover features a diameter of 170mm.<br />
The RSP VIC8 is a galvanised steel static post with an ornamental locking top and<br />
decorative surface trim plate around the bottom. The bollard is 710mm high and has<br />
surface diameter of 90mm. The RSP VIC8 is designed to co-ordinate with telescopic<br />
bollards specified with the ornamental locking top option.<br />
RT SU5 SUNDERLAND TELESCOPIC BOLLARD (FERROCAST)<br />
BANDING OPTIONS<br />
SQUARE SECURITY COVER<br />
ORNAMENTAL LOCKING TOP<br />
Coordinating items<br />
6mm mild<br />
steel lid<br />
Base diameter<br />
135mm<br />
150mm square<br />
section x 5mm<br />
gauge mild steel<br />
5mm gauge<br />
base plate with<br />
drainage holes<br />
RSP VIC8<br />
730<br />
1016
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD12 <strong>Bollards</strong> Q50 190<br />
Telescopic <strong>Bollards</strong> Q50 192<br />
Removable <strong>Bollards</strong> Q50 196<br />
Telescopic <strong>Bollards</strong><br />
Fold Down and Lift Out and Lockable<br />
RT KEY OP1 (FOLD DOWN) BOLLARD<br />
60.3Ø<br />
650<br />
The RT Key OP 1 steel bollard is 650mm high and has a 60mm diameter. Supplied<br />
powder coated in RAL Yellow 1021 as standard, the bollard can be folded down to<br />
temporarily allow vehicle access.<br />
Product Description Product<br />
Reference<br />
Domestic Telescopic Round<br />
76/500<br />
Diameter<br />
(mm)<br />
HAG<br />
(mm)<br />
RTL 80 (LIFT OUT LOCKABLE) BOLLARD<br />
The RTL 80 is a square lift out lockable bollard. Manufactured from galvanised steel,<br />
the bollard is 960mm high and 80 x 80mm wide.<br />
OPTIONS<br />
Height Weight Spec Finish Reflective Banding Add Ons<br />
HBG<br />
(mm)<br />
Weight<br />
(kg)<br />
Operating<br />
Weight<br />
(kg) *<br />
Standard Finish Available<br />
with Lift<br />
Assist<br />
RT RD4 76 500 700 22 6 PC Black 9005 or<br />
Yellow 1021<br />
Anti<br />
Ram<br />
Powder<br />
Coating<br />
Single<br />
Groove<br />
Band<br />
Double<br />
Groove<br />
Band<br />
960<br />
80<br />
Hazard<br />
Banding<br />
n<br />
Separate<br />
Locking Top<br />
Static Round 76/500 RS D4 76 500 300 7 n/a Galvanised n n<br />
Domestic Telescopic Round<br />
76/500 Stainless Steel<br />
RT RD4 SS 76 500 700 22 6 Stainless Steel n<br />
Domestic Static Round<br />
76/500 Stainless Steel<br />
RS001 D4 76 500 250 18 n/a Stainless Steel n<br />
Telescopic Round<br />
90/670 Heavy Duty<br />
RT R8 HD 90 670 700 44 14 Galvanised n n n n n Ornamental<br />
Telescopic Round<br />
90/670 Non Reinforced<br />
RT R5 90 670 950 42 11 Galvanised n n n n Ornamental<br />
Static Round 90/670 RS PR8 90 670 580 16 n/a Galvanised n n<br />
Telescopic Square 90/670 RT SQ8 HD 90 x 90 670 950 44 15 Galvanised n n n Square<br />
Telescopic Square<br />
90/670 Non Reinforced<br />
RT SQ5 90 x 90 670 950 42 13 Galvanised n n Square<br />
Static Square 90/670 RSP SQ8 90 x 90 670 580 19 n/a Galvanised n n<br />
Telescopic Round<br />
101/710 Stainless Steel<br />
RT SS5 101 710 1000 37 17 (5) Stainless Steel n n n n<br />
Static Round<br />
101/710mm Stainless Steel<br />
SSB 01 HD 101 710 540 43 n/a Stainless Steel n n<br />
Telescopic Round 114/670 Heavy<br />
Duty<br />
RT 114/670 114 670 960 55 22.5 (6-7) Galvanised n n n n n<br />
Telescopic Round<br />
114/850 Heavy Duty<br />
RT R14 HD 114 850 1125 66 26.5 (7) Galvanised n n n n n n<br />
Telescopic Round 114/850<br />
Non Reinforced<br />
RT R14 114 850 1125 54 17 Galvanised n n n n<br />
Static Round 114/850 RB 114 114 850 650 18 n/a Galvanised n<br />
Telescopic Round 730mm<br />
Ferrocast<br />
RT SU5 135 730 1020 30 16 Polymer n n<br />
Static Ferrocast Sunderland Low RCB 74 89 730 300 42 n/a Polymer n<br />
Fold Down 650mm RT KEY OP 1 60 650 n/a 7 n/a PC Yellow 1021 n n<br />
Lift Out 960mm RTL 80 80 x 80 960 n/a 21 n/a Galvanised n<br />
* Figure in brackets indicates approximate operating weight with lift assist mechanism.<br />
Coordinating items<br />
64
65<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD13 Hoop Barriers Q41 135<br />
Hoop Barriers<br />
RB60/SS Hoop Barriers, BMW/Mini Garage, Borehamwood<br />
RDB 60<br />
RDB 76/HD<br />
1400<br />
60.3Ø x 4mm gauge<br />
Push button lock<br />
1400<br />
76.1Ø x 4mm gauge<br />
Push button lock<br />
500<br />
400<br />
650<br />
400<br />
Coordinating items<br />
Rhino Hoop Barriers are an effective method of access restriction within many<br />
landscapes. Popular uses include retail parks, car parks and garage forecourts,<br />
where effective perimeter protection is essential.<br />
The Rhino Hoop Barrier range consists of a number of styles and sizes, as well as<br />
both detachable and permanent options.<br />
Detachable Barriers<br />
n The detachable range of Rhino barriers consists of the RDB 60 and RDB 76/HD.<br />
The RDB 60 is manufactured from 60mm diameter steel and the RDB 76/HD<br />
features a larger 76mm diameter.<br />
n The steel is hot dip galvanised to BS EN ISO 1461 (1999) to protect the barriers<br />
from the development of rust and corrosion. Powder coating is also available as<br />
an option.<br />
n The roots of each barrier are locked into place using a push button lock which<br />
allows for quick and easy locking and unlocking.<br />
n Root sockets are supplied complete with a dust cover for when the barrier is<br />
not in use.<br />
Permanent Barriers<br />
n The RB 60, RB 76/HD and RB 90/HD form our range of permanent Rhino barriers.<br />
The RB60 features a diameter of 60mm, whilst the RB 76/HD and RB 90/HD measure<br />
76mm and 90mm respectively.<br />
n Each barrier is manufactured from hot dip galvanised steel and can be powder<br />
coated on request. A full range of British RAL colours is available for all steel<br />
hoop barriers.<br />
n The RB 60 and RB 76/HD Rhino barriers are also available in grade 316L stainless<br />
steel (Ref: RB 60 SS and RB 76 SS). However, the dimensions of the RB 60 SS differ<br />
slightly from that of its steel equivalent. See table on next page for more details.<br />
n Varying barrier lengths are available on request.
RB 60<br />
RB 76/HD<br />
RB 90/HD<br />
Product Description Product<br />
Reference<br />
Diameter<br />
(mm)<br />
Overall<br />
Height (mm)<br />
1400<br />
60.3Ø x 4mm gauge<br />
*Also available in stainless steel. See table below for more information<br />
1400<br />
76.1Ø x 4mm gauge<br />
*Also available in stainless steel. See table below for more information<br />
1400<br />
88.9Ø x 4mm gauge<br />
OPTIONS<br />
Height Fixing Method Finish<br />
HAG (mm) Weight (kg) Standard Finish Ground<br />
Fixing<br />
500<br />
400<br />
650<br />
400<br />
650<br />
400<br />
Base Plate Removable Powder<br />
Coated<br />
Removable Hoop Barrier 60Ømm RD B60 60Ø 900 500 28 Galvanised Steel n n n<br />
Removable Hoop Barrier 76Ømm RD B76/HD 76Ø 1050 650 37 Galvanised Steel n n n<br />
Hoop Barrier 60Ømm RB 60 60Ø 900 500 20 Galvanised Steel n n n<br />
Hoop Barrier 60Ømm Stainless Steel RB 60/SS 60Ø 950 650 20 Grade 316 Stainless Steel n<br />
Hoop Barrier 76Ømm RB 76/HD 76Ø 1050 650 27 Galvanised Steel n n n<br />
Hoop Barrier 76Ømm Stainless Steel RB 76/SS 76Ø 1050 650 25 Grade 316 Stainless Steel n<br />
Hoop Barrier 90Ømm RB 90/HD 90Ø 1050 650 37 Galvanised Steel n n n<br />
66
67<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Polyurethane <strong>Bollards</strong><br />
Dixon Anti-Ram <strong>Bollards</strong>, PC World, Lancaster<br />
WATERSIDE<br />
175mm<br />
1000mm<br />
Ferrocast® <strong>Bollards</strong> are an ideal way to increase security around your perimeter.<br />
Suitable for use in almost any situation and available in a number of styles to<br />
coordinate with most landscapes, whether traditional or contemporary.<br />
Manufactured from an engineering grade polyurethane which is cast around a steel<br />
core, Ferrocast is extremely strong and has a non-ferrous exterior, meaning it will not<br />
rust. This makes Ferrocast ideal in coastal areas where high levels of saline are present.<br />
<strong>Bollards</strong> are supplied with a black, two part polyurethane coating finish which<br />
chemically bonds itself to Ferrocast. This increases chip resistance and weathering<br />
characteristics making it ideal for heavily trafficked areas. A pigment is also added to<br />
Ferrocast to make it the same colour as its paint finish. This ensures that in the event<br />
of any damage to the exterior paint bollards still appear aesthetically pleasing.<br />
Fixing:<br />
Root fixing is offered as standard, but base plate fixing is available as an option on<br />
most bollards.<br />
Options:<br />
We offer a range of options on bollards to tailor them to your individual needs.<br />
These are all available on request and include reflective discs, a second colour and<br />
coats of arms, crests and logos.<br />
Anti-Ram Specification:<br />
<strong>Bollards</strong> can be manufactured to an anti-ram specification. Anti-ram bollards are<br />
moulded around several steel inner cores making them even stronger than standard<br />
bollards. <strong>Marshalls</strong> are an approved supplier to several major retailers who specify<br />
Ferrocast Anti-ram <strong>Bollards</strong> at superstores, retail parks and supermarkets.<br />
Bespoke Design:<br />
In addition to our standard range of bollards, <strong>Marshalls</strong> Street Furniture offer a<br />
bespoke design service whereby we can design and manufacture bollards to a<br />
specific brief to fit in with a project theme. For more details on this please contact<br />
our Sales Office.<br />
n The Waterside Bollard, together with the Waterside seat, bench and bin form the<br />
Waterside Range.<br />
n The Waterside range is based around a unique elliptical form which results in a<br />
highly contemporary and functional design.<br />
n The range is available in silver as standard.
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD14 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Polyurethane <strong>Bollards</strong><br />
ABBEY<br />
ASHBY<br />
BEAUMONT<br />
1093mm<br />
940mm<br />
ALNWICK SMALL<br />
164mm 175mm<br />
181mm<br />
190mm<br />
785mm<br />
ASHTON<br />
BERESFORD<br />
150mm 130mm<br />
197mm<br />
395mm<br />
900mm<br />
920mm<br />
STOCK<br />
ALNWICK MEDIUM<br />
BARNSTAPLE<br />
BIDEFORD<br />
175mm<br />
275mm<br />
Coordinating items<br />
Seating ........................... page 163<br />
Litter Bins ........................ page 205<br />
Cycle Parking ................... page 228<br />
Tree Protection ................ page 283<br />
Notice Boards .................. page 300<br />
590mm<br />
983mm<br />
1295mm<br />
Signage & Lamp Columns .. page 310<br />
Protective Barriers ........... page 321<br />
Post and Rail .................... page 338<br />
Traffic Management ......... page 368<br />
ALNWICK LARGE<br />
BELINDA<br />
BILLY<br />
300mm<br />
210mm<br />
220mm<br />
900mm<br />
1000mm<br />
1000mm<br />
68
69<br />
BIRMINGHAM BOROUGH<br />
BRADFORD<br />
BRISTOL<br />
200mm<br />
1034mm<br />
BURY CAMBRIDGE<br />
CAMDEN<br />
188mm<br />
CANNON – SMALL<br />
110mm<br />
815mm<br />
965mm<br />
CAPITAL<br />
200mm<br />
1134mm<br />
1210mm<br />
117mm 246mm<br />
240mm<br />
1050mm<br />
1130mm<br />
115mm 160mm<br />
1075mm<br />
CAPSTAN CARDIFF<br />
120mm<br />
900mm<br />
CANNON – LARGE<br />
134mm<br />
220mm<br />
1000mm<br />
895mm<br />
1000mm
CARRONADE<br />
CITY<br />
200mm<br />
DARLINGTON<br />
145mm<br />
165mm<br />
1140mm<br />
950mm<br />
1095mm<br />
CHELTENHAM<br />
CLAPHAM JUNCTION<br />
DAVENTRY<br />
165mm<br />
125mm<br />
210mm<br />
1220mm<br />
1000mm<br />
940mm<br />
STOCK<br />
CHERTSEY CHORLEY<br />
136mm<br />
1000mm<br />
CONSERVATION CORNWALL<br />
150mm<br />
1110mm<br />
DEAL DEANSGATE<br />
1000mm<br />
225mm<br />
124mm<br />
120mm 115mm<br />
1251mm<br />
1095mm<br />
1140mm<br />
70
71<br />
DELAVAL<br />
DURHAM<br />
GATESHEAD<br />
150mm<br />
175mm<br />
172mm<br />
800mm<br />
930mm<br />
845mm<br />
DEWSBURY<br />
EALING<br />
HACKNEY<br />
150mm<br />
200mm<br />
155mm<br />
920mm<br />
1005mm<br />
970mm<br />
STOCK<br />
DIXON ANTI RAM DUDLEY<br />
155mm<br />
1000mm<br />
EAST SUSSEX EASTBOURNE<br />
168mm<br />
915mm<br />
HARINGEY HAVANT<br />
167mm<br />
947mm<br />
222mm<br />
218mm<br />
180mm<br />
1155mm<br />
1178mm<br />
1220mm
HENDON<br />
KIER FLUTED<br />
147mm<br />
200mm<br />
LEYTONSTONE<br />
175mm<br />
917mm<br />
900mm<br />
950mm<br />
STOCK<br />
HEXHAM<br />
175mm<br />
LANGBAURGH<br />
310mm<br />
890mm<br />
ISLINGTON KENDAL<br />
LEICESTER<br />
170mm<br />
140mm<br />
LEICESTER HEAVY<br />
MAIDENHEAD MANCHESTER<br />
MANCHESTER MILLENNIUM<br />
165mm<br />
917mm<br />
918mm<br />
225mm<br />
990mm<br />
1000mm<br />
1000mm<br />
STOCK<br />
190mm<br />
156mm<br />
248mm<br />
910mm<br />
1000mm<br />
900mm<br />
72
73<br />
MELTON MOWBRAY<br />
NEWCASTLE<br />
186mm<br />
168mm<br />
OLD CAMDEN<br />
230mm<br />
960mm<br />
1000mm<br />
1200mm<br />
MIDDLETON MORPETH<br />
NEEDLE<br />
180mm<br />
1000mm<br />
110mm<br />
Also available as 1000mm high<br />
NEWCASTLE FLUTED NORWICH<br />
OBAN<br />
168mm<br />
1000mm<br />
120mm<br />
OLDHAM PENARTH<br />
PONTEFRACT<br />
225mm<br />
965mm<br />
168mm<br />
900mm<br />
1075mm<br />
970mm<br />
STOCK<br />
120mm<br />
190mm<br />
210mm<br />
1100mm<br />
1090mm<br />
1000mm
PUTNEY<br />
RENFREW<br />
170mm<br />
160mm<br />
1242mm<br />
RADLETT REDBRIDGE<br />
REDROUTE<br />
180mm<br />
900mm<br />
SANDWELL SEAHAM<br />
SLOUGH<br />
ST ANNES ST HELENS<br />
STOCKPORT<br />
SUNDERLAND LOW<br />
202mm<br />
750mm<br />
1005mm<br />
140mm<br />
180mm<br />
922mm<br />
1030mm<br />
190mm<br />
197mm<br />
150mm<br />
915mm<br />
850mm<br />
1215mm<br />
151mm<br />
150mm<br />
136mm<br />
950mm<br />
900mm<br />
STOCK<br />
780mm<br />
74
75<br />
SUNDERLAND SUTTON REDROUTE<br />
SWANSEA MEDIUM<br />
TEIGNMOUTH<br />
157mm<br />
896mm<br />
VICTORIANA WAKEFIELD<br />
WESTMINSTER<br />
WHITLEY<br />
120mm<br />
128mm<br />
900mm<br />
WILLIAM IV WOLVERHAMPTON<br />
YORK<br />
MSF121P<br />
140mm<br />
900mm<br />
1010mm<br />
236mm<br />
114mm<br />
700mm<br />
1000mm<br />
157mm<br />
130mm<br />
160mm<br />
1100mm<br />
1075mm<br />
780mm<br />
195mm<br />
185mm<br />
158mm<br />
1150mm<br />
980mm<br />
1000mm
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD15 <strong>Bollards</strong> Q50 190<br />
Polyurethane <strong>Bollards</strong><br />
Special <strong>Bollards</strong><br />
Ferrocast Penguins<br />
Billy Bollard, Nottingham<br />
Coordinating items<br />
n Ferrocast® is a highly versatile material which can be used to create bespoke<br />
bollards to fit in with any project themes. We are able to offer a full design service<br />
to ensure that clients get the product they require. This is particularly useful<br />
to designers and landscape architects who may be looking to create a special<br />
bollard to fit in with their concepts.<br />
n We have a proven track record of working with local authorities, residents’ groups,<br />
artists and designers to produce many imaginative schemes.<br />
n Nottingham City Council: Billy and Belinda <strong>Bollards</strong> designed for ‘Safer Routes to<br />
School’ initiative.<br />
n Manchester City Council: Giant pencils to identify school crossing patrols.<br />
Giant Pencils, Manchester<br />
76
77<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD14 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Polyurethane <strong>Bollards</strong><br />
Ferrocast®<br />
Coordinating items<br />
Seating ........................... page 163<br />
Litter Bins ........................ page 205<br />
Cycle Parking ................... page 228<br />
Tree Protection ................ page 283<br />
Notice Boards .................. page 300<br />
Signage & Lamp Columns .. page 310<br />
Protective Barriers ........... page 321<br />
Post and Rail .................... page 338<br />
Traffic Management ......... page 368<br />
OPTIONS<br />
Fixing Method Add Ons<br />
Product Product Diameter<br />
Overall<br />
Length HAG Weight Base Anti Removable Reflective Ballotini Hand Signs Locking Chain<br />
Description Reference (mm) (mm) (mm) (kg) Plate Ram Tape Ring Paint Socket Connectors<br />
Abbey BL000 164 1393 1093 17 n n n n n n n<br />
Alnwick Small BL008 175 695 395 8 n n n n n n n<br />
Alnwick Medium BL012 175 890 590 14 n n n n n n n<br />
Alnwick Large BL016 300 1200 900 33 n n n n n n<br />
Ashby BL048 181 1085 785 31 n n n n n<br />
Ashton BL052 150 1200 900 27 n n n n n n<br />
Barnstaple BL056 130 1283 983 16 n n n n n n n n n<br />
Belinda Fixed Colour BL062 210 1300 1000 41 n n n n n<br />
Beaumont BL070 190 1240 940 26 n n<br />
Beresford BL068 197 1220 920 27 n n n<br />
Bideford BL072 275 1595 1295 60 n n n n n<br />
Billy Fixed Colour BL074 220 1300 1000 41 n n n n n<br />
Birmingham BL076 200 1334 1034 25 n n n n n n n n<br />
Borough BL080 200 1434 1134 35 n n n n n n n<br />
Bradford BL084 115 1430 1130 19 n n n n n n n n<br />
Bristol BL096 160 1195 895 23 n n n n n n n n n<br />
Bury BL100 188 1115 815 22 n n n n n n n n n<br />
Cambridge BL104 117 1510 1210 22 n n n n n<br />
Camden BL116 246 1375 1075 44 n n n n<br />
Cannon Large BL136 134 1300 1000 21 n n n n n n n n n<br />
Cannon Small BL132 110 1265 965 14 n n n n n n n n<br />
Capital BL144 240 1350 1050 39 n n n n n n<br />
Capstan BL150 120 1200 900 15 n n n n n n n n n<br />
Cardiff BL152 220 1300 1000 22 n n n n n n n n n<br />
Carronade BL156 200 1440 1140 49 n n n n n n n<br />
Cheltenham BL176 165 1520 1220 20 n n n n n n n n<br />
Chertsey BL184 136 1300 1000 21 n n n n n n n n<br />
Chorley BL188 225 1551 1251 31 n n n n n n n<br />
City BL196 145 1250 950 24 n n n n n n n n n<br />
Clapham Junction BL208 125 1300 1000 15 n n n n n n n n n<br />
Conservation BL224 150 1410 1110 24 n n n n n n n n<br />
Cornwall BL228 124 1395 1095 17 n n n n n n n n<br />
Darlington BL240 165 1395 1095 28 n n n n n n<br />
Daventry BL248 210 1240 940 23 n n n n n n n n<br />
Deal BL252 120 1300 1000 17 n n n n n n n n n<br />
Deansgate BL256 115 1440 1140 21 n n n n n n n n n<br />
Delaval BL260 150 1100 800 21 n n n n n n n n<br />
Dewsbury BL268 150 1220 920 18 n n n n n n n<br />
Dixon Anti-Ram BL272 155 1300 1000 34 n n n n<br />
Dudley BL280 222 1455 1155 60 n n n n n<br />
Durham BL284 175 1230 930 25 n n n n n n n n<br />
Ealing BL288 200 1305 1005 24 n n n n n n n n n<br />
East Sussex BL296 168 1215 915 17 n n n n n n n n n<br />
Eastbourne BL304 218 1478 1178 28 n n n n n n
OPTIONS<br />
Fixing Method Add Ons<br />
Product Product Diameter<br />
Overall<br />
Length HAG Weight Base Anti Removable Reflective Ballotini Hand Signs Locking Chain<br />
Description Reference (mm) (mm) (mm) (kg) Plate Ram Tape Ring Paint Socket Connectors<br />
Gateshead BL344 172 1145 845 26 n n n n n n<br />
Hackney BL348 155 1270 970 20 n n n n n n n<br />
Haringey BL352 167 1247 947 28 n n n n n n n<br />
Havant BL360 180 1520 1220 28 n n n n n n<br />
Hendon BL368 147 1200 900 25 n n n n n n n n<br />
Hexham BL372 175 1217 917 22 n n n n n n n n<br />
Islington BL380 170 1290 990 20 n n n n n n n n<br />
Kendal BL386 190 1210 910 20 n n n n n n n n<br />
Kier Fluted BL388 200 1250 950 41 n n n<br />
Langbaurgh BL396 310 1190 890 50 n n<br />
Leicester BL400 140 1300 1000 15 n n n n n n n n n<br />
Leicester Heavy BL412 156 1300 1000 24 n n n n n n n n n<br />
Leytonstone BL416 175 1217 917 22 n n n n n n n<br />
Maidenhead BL420 165 1218 918 26 n n n n n n n<br />
Manchester BL428 225 1300 1000 21 n n n n n n n n n<br />
Manchester Millennium BL424 248 1200 900 40 n n n<br />
Melton Mowbray BL440 186 1260 960 32 n n n n n<br />
Middleton BL442 180 1300 1000 19 n n n n n n n n n<br />
Morpeth BL452 110 1200 900 12 n n n n n n n n n<br />
Needle BL458 120 1300 1000 30 n n n<br />
Newcastle BL460 168 1300 1000 26 n n n n n n n<br />
Newcastle Fluted BL465 168 1300 1000 26 n n n n n n<br />
Norwich BL468 120 1375 1075 19 n n n n n n n n n<br />
Oban BL470 190 1400 1100 19 n n n n n n n n n<br />
Old Camden BL472 230 1500 1200 34 n n n n n n n<br />
Oldham BL476 225 1265 965 21 n n n n n n n n n<br />
Penarth BL484 168 1270 970 23 n n n n n n<br />
Pontefract BL496 210 1390 1090 36 n n n n n n n<br />
Putney BL512 170 1542 1242 40 n n n n n n n<br />
Radlett BL516 180 1200 900 23 n n n n n n n n n<br />
Redbridge BL518 197 1215 915 25 n n n n n n n<br />
Redroute BL520 151 1250 950 18 n n n n n n n n n<br />
Renfrew BL524 160 1050 750 16 n n n n n n<br />
Sandwell BL526 140 1222 922 14 n n n n n<br />
Seaham BL528 150 1150 850 19 n n n n n n n<br />
Slough BL536 150 1200 900 23 n n n n n n n n n<br />
St Annes BL540 202 1305 1005 40 n n n n n<br />
St Helens BL544 180 1330 1030 22 n n n n n n n n n<br />
Stockport BL552 190 1515 1215 35 n n n n n<br />
Sunderland Low BL560 136 1080 780 16 n n n n n n n n n<br />
Sunderland BL556 157 1196 896 20 n n n n n n n n n<br />
Sutton Redroute BL564 128 1200 900 20 n n n n n n n n n<br />
Swansea Medium BL568 157 1300 1100 23 n n n n n n n n n<br />
Teignmouth BL572 195 1450 1150 42 n n n n<br />
Victoriana BL580 120 1200 900 10 n n n n n n<br />
Wakefield BL584 236 1000 700 36 n n n n<br />
Westminster BL592 130 1375 1075 27 n n n n n n n<br />
Whitley BL596 185 1280 980 18 n n n n n n n n n<br />
William IV BL600 140 1310 1010 20 n n n n n<br />
Wolverhampton BL602 114 1300 1000 16 n n n n n n<br />
York BL604 160 1080 780 15 n n n n n<br />
MSF121P BL682 158 1300 1000 18 n n n n n n n n<br />
78
79<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425<br />
Plastic <strong>Bollards</strong><br />
Heritage 150 Bollard<br />
Regency 150 Bollard<br />
Sentinel 150 Bollard<br />
Sentinel Reflex Bollard<br />
BLLD16 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Coordinating items<br />
Litter Bins ........................ page 209 Traffic Management ......... page 368<br />
Available in both traditional and modern styles plastic bollards are suitable for both<br />
decorative and highway applications.<br />
Plastic bollards and low level signage are ideal for a range of<br />
applications, including:<br />
• Traffic management and traffic calming schemes.<br />
• Separation of pedestrian cycle and vehicular routes.<br />
• Demarcation of parking spaces and pedestrian precincts.<br />
• Hazard marking and anti-ram application.<br />
• Verge control.<br />
Plastic <strong>Bollards</strong> are manufactured from UV stabilised medium density moulded<br />
polyethylene (MDPE) which is extremely durable with outstanding impact, fracture<br />
and shatter resistance properties. <strong>Bollards</strong> and low level signage are virtually<br />
maintenance free. The solid body colour is permanently moulded in, eliminating the<br />
need for maintenance painting. Units are wear resistant and scratches and parking<br />
nudges are less evident. For a full material specification please see page 392.<br />
Eco option<br />
Made using a combination of 50% chipped bottles and 50% regular polymer Eco<br />
<strong>Bollards</strong> are available in the Heritage and Sentinel ranges. Eco <strong>Bollards</strong> are available<br />
in an attractive stone effect finish although, due the nature of the material used, an<br />
element of minor surface colour variation should be expected.<br />
Reflex option<br />
<strong>Bollards</strong> can incorporate a patented self-righting mechanism to withstand impact<br />
from any direction. Reflex bollards are designed to adapt to a wide range of<br />
environments and are ideal for vulnerable sites where conventional bollards require<br />
frequent replacement. The following bollards are available as a reflex option:<br />
Heritage, Sentinal, Regency, Woburn, Regency, Stirling and Edgeminder.<br />
Banding options<br />
<strong>Bollards</strong> are available with three banding options:<br />
Class Ref 1: Engineering grade, mostly used for signage and ‘contrast’ banding.<br />
Class Ref 2: High intensity primarily used for traffic safety applications.<br />
Decorative: Metal effect (gold/silver) banding used on most decorative bollards.<br />
Colour Options<br />
Choose from a range of Heritage and Modern colours, other colours can be made to<br />
order. The full range of colours can be found on page 392.<br />
Fixing Options<br />
For a choice of fixing options please see page 398.<br />
Eco Bollard Eco Bollard
HERITAGE 150<br />
171mm<br />
1024mm<br />
HERITAGE 150 VISIBOL HERITAGE DECORATIVE<br />
SENTINEL 150 SENTINEL 150 VISIBOL SENTINEL DECORATIVE<br />
REGENCY 75 REGENCY 150 REGENCY DECORATIVE<br />
OPTIONS<br />
Height Fixing Method Banding Add Ons<br />
Overall Single or<br />
Product Product Diameter Height HAG Weight Standard Permanent Socketed Anti-Ram Surface Class Class Metallic Reflex Double<br />
Description Reference (mm) (mm) (mm) (kg) Finish Mount Ref 1 Ref 2 Option Sided Sign<br />
Heritage 150 171 1024 Any Heritage Colour n n n n n n n n<br />
Heritage 150 Visibol 171 1024 Any Heritage Colour n n n n n n n<br />
Heritage Decorative 171 921 Any Heritage Colour n n n n AS n<br />
Heritage Eco 150 171 1024 Mottle Slate Grey n n n n<br />
Sentinel 150 166 1030 Any Modern Colour n n n n n n n<br />
Sentinel 150 Visibol 166 1030 Any Modern Colour n n n n n n<br />
Sentinel Decorative 166 926 Any Modern Colour n n n n AS n<br />
Regency 75 166 955 Any Heritage Colour n n n n n n n n<br />
Regency 150 166 1030 Any Heritage Colour n n n n n n n n<br />
Regency Decorative 166 910 Any Heritage Colour n n n n AS n<br />
AS = As Standard<br />
166mm<br />
166mm<br />
1030mm<br />
955mm<br />
171mm<br />
166mm<br />
166mm<br />
1024mm<br />
1030mm<br />
1030mm<br />
171mm<br />
166mm<br />
166mm<br />
921mm<br />
926mm<br />
910mm<br />
80
81<br />
WOBURN 75<br />
STERLING<br />
WOBURN 75<br />
185mm<br />
1009mm<br />
WOBURN 150<br />
185mm<br />
1084mm<br />
STERLING<br />
MONARCH<br />
EDGEMINDER<br />
OPTIONS<br />
Height Fixing Method Banding Add Ons<br />
Overall Single or<br />
Product Product Diameter Height HAG Weight Standard Permanent Socketed Anti-Ram Surface Class Class Metallic Reflex Double<br />
Description Reference (mm) (mm) (mm) (kg) Finish Mount Ref 1 Ref 2 Option Sided Sign<br />
Woburn 75 185 1009 Any Heritage Colour n n n n n n n n<br />
Woburn 150 185 1084 Any Heritage Colour n n n n n n n n<br />
Sterling 170 800 Any Heritage Colour n n n<br />
Monarch 170 800 Any Modern Colour n n n n<br />
Edgeminder 130 510 Any Heritage Colour n n n n n<br />
170mm<br />
800mm<br />
MONARCH<br />
170mm<br />
800mm<br />
EDGEMINDER<br />
130mm<br />
510mm
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD17 <strong>Bollards</strong> Q50 190 Litter Bins ........................ page 209 Traffic Management ......... page 368<br />
Plastic <strong>Bollards</strong><br />
Vergemarkers<br />
Reflex Vergemarker<br />
REFLEX VERGEMARKER<br />
938mm<br />
above<br />
ground<br />
Coordinating items<br />
n The Reflex Vergemarker is the ideal reflective marker for high risk location;<br />
it withstands vehicle drive through and impact from any direction.<br />
n The Reflex Vergemarker eliminates the need for costly replacements of<br />
conventional marker posts.<br />
n A patented ‘self righting’ mechanism returns the Reflex Vergemarker to its<br />
original position.<br />
n Manufactured from UV stabilised polyethylene (PE) based material. Supplied in<br />
black with a white band and with aluminium backed shatterproof Class Ref 2<br />
reflectors angled for improved reflectivity on bands.<br />
OPTIONS<br />
Height Fixing Method Banding Add Ons<br />
Overall Single or<br />
Product Product Diameter Height HAG Weight Standard Permanent Socketed Anti-Ram Surface Class Class Metallic Reflex Double<br />
Description Reference (mm) (mm) (mm) (kg) Finish Mount Ref 1 Ref 2 Option Sided Sign<br />
Reflex Vergemarker 125 1260 938 Black and White n AS AS<br />
AS = As Standard<br />
125mm<br />
82
83<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD18 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Plastic <strong>Bollards</strong><br />
Low Level Signage – Series 300<br />
Sentinel Sign 300 Visibol<br />
Coordinating items<br />
Litter Bins ........................ page 209 Traffic Management ......... page 368<br />
n Versatile Traffic Management products, Series 300 comprises either Heritage or<br />
Sentinel <strong>Bollards</strong> with a sign with a face size of 300mm.<br />
n Options:<br />
Sign Options: A full range of sign options is available, including a double<br />
sided face.<br />
Reflective Banding: Class Ref 1 or 2 reflective banding can be supplied.<br />
Fully Reflective: Visibol Bollard option is available.<br />
Fixing Options: Please see page 398.<br />
HERITAGE SIGN 300 HERITAGE SIGN 300 VISIBOL SENTINEL SIGN 300 SENTINEL SIGN 300 VISIBOL<br />
364mm<br />
1419mm<br />
364mm<br />
SENTINEL AND HERITAGE SIGN TOP OPTIONS SIGN SUGGESTIONS<br />
1419mm<br />
OPTIONS<br />
Height Fixing Method Banding Add Ons<br />
Overall Single or<br />
Product Product Diameter Height HAG Weight Standard Permanent Socketed Anti-Ram Surface Class Class Metallic Reflex Double<br />
Description Reference (mm) (mm) (mm) (kg) Finish Mount Ref 1 Ref 2 Option Sided Sign<br />
Heritage Sign 300 364 1419 Any Heritage Colour n n n n n n n n<br />
Heritage Sign 300 Visibol 364 1419 Any Heritage Colour n n n n n n n<br />
Sentinel Sign 300 364 1419 Any Modern Colour n n n n n n<br />
Sentinel Sign 300 Visibol 364 1419 Any Modern Colour n n n n n<br />
364mm<br />
1419mm<br />
364mm<br />
1419mm
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD18 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Plastic <strong>Bollards</strong><br />
Low Level Signage – Series 230<br />
Sentinel Sign 230<br />
339mm<br />
1352mm<br />
Coordinating items<br />
Litter Bins ........................ page 209 Traffic Management ......... page 368<br />
n A range of hard wearing and adaptable Low Level Signage <strong>Bollards</strong>, Series 230<br />
comprises either Heritage or Sentinel <strong>Bollards</strong> with a sign with a face size<br />
of 230mm.<br />
n Options:<br />
Sign Options: A full range of sign options is available, including a double<br />
sided face.<br />
Reflective Banding: Class Ref 1 or 2 reflective banding can be supplied.<br />
Fully Reflective: Visibol Bollard option is available.<br />
Fixing Options: Please see page 398.<br />
HERITAGE SIGN 230 HERITAGE SIGN 230 VISIBOL SENTINEL SIGN 230 SENTINEL SIGN 230 VISIBOL<br />
339mm<br />
1352mm<br />
SENTINEL AND HERITAGE SIGN TOP OPTIONS SIGN SUGGESTIONS<br />
OPTIONS<br />
Height Fixing Method Banding Add Ons<br />
Overall Single or<br />
Product Product Diameter Height HAG Weight Standard Permanent Socketed Anti-Ram Surface Class Class Metallic Reflex Double<br />
Description Reference (mm) (mm) (mm) (kg) Finish Mount Ref 1 Ref 2 Option Sided Sign<br />
Heritage Sign 230 339 1352 Any Heritage Colour n n n n n n n n<br />
Heritage Sign 230 Visibol 339 1352 Any Heritage Colour n n n n n n n<br />
Sentinel Sign 230 339 1352 Any Modern Colour n n n n n n n<br />
Sentinel Sign 230 Visibol 339 1352 Any Modern Colour n n n n n n<br />
339mm<br />
1352mm<br />
339mm<br />
1352mm<br />
84
85<br />
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD19 <strong>Bollards</strong> Q50 190 Seating ........................... page 167<br />
Planters ........................... page 262<br />
Recycled Plastic Composite <strong>Bollards</strong><br />
n Recycled Plastic Composite (RPC) <strong>Bollards</strong> are produced using plastic waste and<br />
manufactured using extruded techniques.<br />
n The bollards are suited for area demarcation. For perimeter protection and higher<br />
risk areas, steel cores can be inserted on request.<br />
n RPC is maintenance free, it is non-porous and therefore not subject to rot, algae<br />
or fungal growth, as such it is suitable for use in very wet or damp conditions.<br />
Also, as it is an extruded product, it is free from cracking and splintering.<br />
n Due to high strength and robust construction RPC furniture is vandal resistant to<br />
physical attack. It has an easy wipe clean surface and paint and marker pen can<br />
easily be removed with thinners without damaging the product.<br />
n <strong>Bollards</strong> have an extended product lifetime as RPC is less susceptible to<br />
degradation over time, the whole life cost can be a third of the cost of a<br />
traditional material.<br />
Options<br />
n Countersunk Reflective Bands: <strong>Bollards</strong> can be supplied with a range of<br />
reflective banding options to increase visibility.<br />
n <strong>Bollards</strong> are available with a choice of two or three 25mm reflective bands, or a<br />
larger, single 50mm or 80mm band.<br />
n Reflective bands are available in a choice of three colour options; red, yellow<br />
or white.<br />
n Reflectors: Square reflective discs can also be added to bollards to increase<br />
visibility.<br />
SQUARE BOLLARD<br />
FLAT TOP<br />
LISMORE BOLLARD<br />
Coordinating items<br />
Notice Boards .................. page 299<br />
CIRCULAR BOLLARD<br />
FLAT TOP<br />
Please Note: The Lismore Bollard is not manufactured using the Intruplas process<br />
Size Top Options Colour Reflective Bands<br />
(in red, yellow or white)<br />
Style Diameter Total Length HAG Flat Chamfered Domed Black Mid-Brown 25mm 50mm 80mm Reflectors<br />
(mm) (mm) (mm)<br />
Circular 100 1500 1000 n n n n n<br />
Circular 150 1500 1000 n n n n n n n<br />
Circular 150 1200 900 n n n n n n n<br />
Circular 132 1500 1000 n n n n n n n<br />
Circular 132 1200 900 n n n n n n n<br />
Circular 125 1200 900 n n n n n n<br />
Circular 125 1500 1000 n n n n n n<br />
Circular 125 1200 900 n n n n n n<br />
Circular 125 1500 1000 n n n n n n<br />
Circular 100 1200 900 n n n n n<br />
Square 100 x 100 1250 900 n n n n n<br />
Rectangular 140 x 100 1200 900 n n n n<br />
150Ø<br />
1050<br />
400
www.marshalls.co.uk/streetfurniture<br />
Sales Office: 0870 600 2425 BLLD20 <strong>Bollards</strong> Q50 190<br />
Removable <strong>Bollards</strong> Q50 196<br />
Timber <strong>Bollards</strong><br />
Sineu Graff<br />
Timber Bollard with cast iron top<br />
Coordinating items<br />
Seating ........................... page 165<br />
Litter Bins ........................ page 202<br />
n Timber <strong>Bollards</strong> are manufactured in hardwood and finished with a<br />
natural coloured protective treatment.<br />
OPTIONS<br />
Height Fixing Method<br />
Planters ........................... page 248<br />
n The treatment provides UV resistance and protection against water, fungus and<br />
insect ingress.<br />
n Cast iron caps are treated against rust and have a polyester powder coated<br />
paint finish.<br />
n <strong>Bollards</strong> are supplied with two recessed (20mm) grooves.<br />
n <strong>Bollards</strong> are supplied with three types of fixing:<br />
– Root fixing<br />
– Lift out and lockable (with ground socket and optional cover)<br />
– Ground anchor with fixing bolts.<br />
TIMBER BOLLARD WITH CHAMFER TOP TIMBER BOLLARD WITH CAST IRON TOP<br />
110 x 110<br />
850<br />
350<br />
110 x 110<br />
Product Product Diameter Height HAG Weight Standard Lift Out and Ground<br />
Description Reference (mm) (mm) (mm) (kg) Finish Lockable Anchor (A)<br />
Square Hardwood Bollard 40.301 110 x 110 1200 1000 12 Treated Tropical Hardwood n n<br />
Square Hardwood Bollard with Cast Iron Cap 40.305 110 x 110 1200 1000 13 Treated Tropical Hardwood n n<br />
850<br />
350<br />
86