testo 300 M, professional flue gas analyser

88Practical accessories°CEconomical software, Windows® software for datamanagementWith convenient analysis and graphics function,online measurement and barcode printoutPart no. 0554 0310SoftCase (protects instrument from dirt andimpact) made of plastic, with carrier strap andmagnetic plateCan be positioned on boiler, for examplePart no. 0516 0301Compact gas drier, basic versionPart no. 0632 3370Compact gas drier, comfort versionPart no. 0632 3371For testo 300 XLAttachable printerPart no. 0554 0570SoftCase (protects printer from dirt/impact)Part no. 0516 0411Vol.% O2ppmCOVol. %CO2ppmNOλTesto printer with 1 roll of thermal paper and 4 AAsize batteriesPrints readings on locationPart no.0554 0545Spare NO measuring cellQuick and easy replacement of measuring cell byuserPart no. 0390 0074Smoke tester with oil, soot sheet for measuringsoot in flue gasPart no.0554 0307For testo 300 XLBarcode pen to read in measurement locationsQuick and accurate allocation of reading to sitePart no.0554 0460∆PeffgeffnOrdering data for testo 300 M/XLCable, 1.5 m long, connects probe with plug-in head to meas. instrumentPUR coating materialPart no.testo 300 M, flue gas analyser, with rech. batt. and calibration protocol 0563 0310Measures O2, CO2, CO (H2 compensated), effg/effn, draught/pressure, differential pressure, °Ctesto 300 XL, flue gas analyser, incl. rech. battery and calibration protocol 0563 0300Measures O2, CO2, CO (H2 compensated), CO (ambient), effg/effn, draught/pressure, differentialpressure, CH4, °C, differential temperatureMains unit 230 V/ 8 V/ 1 A, for instrument (European plug)0554 1084For mains operation and battery rechargingNO measuring cell0440 3922Built-in in flue gas analyserNO measuring cell (upgrade)0554 3922For subsequent installation in flue gas analyserSpare CO measuring cell0390 0072Quick and easy replacement of measuring cell by userSpare NO measuring cell0390 0074Quick and easy replacement of measuring cell by userSpare O2 measuring cellTesto printer with 1 roll of thermal paper and 4 AA size batteriesPrints readings on locationSpare thermal paper for printer (6 rolls)Recharger for printer (with 4 standard rech. batt.)Rechargeable batteries are recharged externallyCar charging adapter, ready to measure following recharging in carBattery is recharged while travelling in carHose connection set, incl. silicone hose and connection adapterFor separate gas pressure measurementSmoke tester with oil, soot sheet for measuring soot in flue gasPC software and accessories0390 00700554 05450554 05690554 01100554 04240554 03150430 01430554 0307Economical software, Windows® software for data management0554 0310With convenient analysis and graphics function, online measurement and barcode printoutRS232 cable0409 0178Connects instrument to PC (1.8 m) for data transferOrdering data for AccessoriesSpare particle filter for flue gas analyser (10 off)Filter paper to determine smoke number40 strips for approx. 200 measurementsSoftCase (protects instrument from dirt and impact) made of plastic, with carrierstrap and magnetic plateTransport case (leather) for instrument, probes and accessoriesRobust, spacious case made of real leatherAluminium case for instrument, probe and accessoriesProbes in lid make it easy to find parts in caseTransport case (plastic) for measuring instrument, probesMeasurement case (leather) with drawers for instruments and accessoriesSystem case for analyser, probes and accessoriesProduct line system case with small plastic boxes without contents, attachableto system case 0516 0310Tools system case with tools bag without contents, attachable to system case0516 0310Universal system case without sections, attachable to system case 0516 0310Part no.0554 33710554 03080516 03010516 03060516 03000516 0303ISO calibration certificate/Flue gas0520 0003Calibration points 2.5% O2; 100 and 1000 ppm CO; 800 ppm NO; 80 ppm NO2; 1000 ppm SO2Ordering data for gas drierCompact gas drier, basic version0632 3370For measurements with a high condensate level (manual condensate emptying)Compact gas drier, comfort version0632 3371For measurements with a high condensate level and long-term measurements (automatic condensate emptying)Mains unit for compact gas drier and flue gas analyser0554 1143Current connection cable, connects gas drier to flue gas analyserSupplies power to flue gas analyser via the compact gas drier mains unitSpare particle filter for compact gas drier (5 off)0516 01000516 03100516 03280516 03290516 03310449 00340554 3370

Suitable probes at a glance89Ordering data for accessories for testoPart no.Part no.Memory extension to 400 data blocksSaves readings from up to 400 complete systems in testo 300 XL0440 0122Barcode pen to read in measurement locationsQuick and accurate allocation of reading to site0554 0460Attachable printer (securely attached) including 1 roll of thermal paper andbatteries0554 0570Barcode labels, self-adhesive (1200 off)Location marked with barcode, printed using software0554 0411SoftCase for attachable printer (protects printer from dirt/impact)Protects from impact and falls0516 0411Adhesive pockets (50 off) for printout, paper barcode labels...0554 0116For testo 300 M and 300 XL Illustration Part no.Compact flue gas probe, 180 mm immersion depth with probestop, NiCr-Ni thermocouple up to +500°C, built-in independentcondensate trap and particle filter, 2.2 m hoseCompact flue gas probe, 300 mm immersion depth with probestop, NiCr-Ni thermocouple up to +500°C, built-in independentcondensate trap and particle filter, 2.2 m hose180 mmØ 8 mm300 mmØ 8 mm0600 95340600 9532°CVol.% O2ppmCOFlue gas probe, 300 mm immersion depth with probe stop, NiCr-Nithermocouple up to +1000°C, built-in independent condensate trapand particle filter, 2.2 m hoseFlue gas probe, 700 mm immersion depth with probe stop, NiCr-Nithermocouple up to +1000°C, built-in independent condensate trapand particle filter, 2.2 m hoseFlexible flue gas probe, 330 mm immersion depth, NiCr-Ni thermocoupleup to +500°C, integrated condensate trap independent of position and particlefilter, 2.2 m hose (without flue draught measurement)300 mmØ 8 mm700 mmØ 8 mm330 mmØ 10.5 mm0600 85320600 85310600 9430Vol. %CO2ppmNOλFor testo 300 M and 300 XL Illustration Meas. range Accuracy t99 Conn. Part no.Ambient air probe, 300 mm immersion depth, with probe stop forseparate measurement of ambient air temperature (e.g. systemswith outside primary air intakes)Mini amb. air probe, 60 mm imm. depth, w. probe stop, magneticclip, Tmax +100°C, for dual wall clearance temp. meas. in sys. w.outside primary air intakesAmbient air probe, immersion depth 190 mm, with probe stop,magnetic clip, Tmax + 100°C, for ambient air temperaturemeasurement in systems dependent on/independent of ambient airMini ambient air probe, Tmax +80°C, for separate ambient airtemperature measurement60 mmØ 4 mm190 mmØ 4 mm300 mmØ 5 mm0... +100 °C 0600 97910... +100 °C 0600 97970... +100 °C 0600 97870... +80 °C 0600 3692∆PeffgeffnPipe wrap probe for pipes with diameter of up to 2", for flow/returntemperature measurement in hydronic systems-60... +130 °C Class 2 5 s Fixed cable 0600 4593Spare meas. head for pipe wrap probe35 mm15 mm-60... +130 °C Class 2 5 s 0602 0092Quick-action surface probe with spring-loaded thermocouple bandfor measurements in floor heating systems, radiators, insulation...150 mmØ 10 mm-200... +300 °C Class 2 3 s Plug-in head,connection cable 04300143 or 0430 0145required0604 0194For testo 300 XL only Illustration Meas. range t90 Other features Part no.Gas leak detection probe to detect leaks in gasheating systemsCO probe to measure CO level in ambient air190 mm200 mmØ 25 mmØ 20 mm0... +10000 ppmCH42 s1st alarm limit: 200 ppm CH42nd alarm limit: 10,000 ppm CH4Alarm: optical display (LED) and audible signal(buzzer) triggered if alarm limit is exceeded0632 12460... +500 ppm CO 35 s 0632 1247Dual wall clearance probe, sickle shaped supply O2probe for measuring the O2 level in the dual wallclearance of systems independent of ambient air0632 1248

90testo 300 M, Professional set for heating fitters°CVol.% O2ppmCOVol. %CO2ppmNOλ∆PeffgeffnRecommended kit:testo 300 M, flue gas analyser, with rech. batt. and calibration protocolMeasures O2, CO2, CO (H2 compensated), effg/effn, draught/pressure,differential pressure, °CMains unit 230 V/ 8 V/ 1 A, for instrument (European plug)For mains operation and battery rechargingCompact flue gas probe, 300 mm immersion depth with cone, NiCr-Nithermocouple up to +500°C, built-in independent condensate trap and particlefilter, 2.2 m hoseMini amb. air probe, 60 mm imm. depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in sys. w. outside primary air intakesTesto printer with 1 roll of thermal paper and 4 AA size batteriesPrints readings on locationSoftCase (protects instrument from dirt and impact) made of plastic, with carrierstrap and magnetic plateSmoke tester with oil, soot sheet for measuring soot in flue gasPart no.0563 03100554 10840600 95320600 97970554 05450516 03010554 0307Heating technicians expect a lot frommodern day flue gas analysers like the testo300 M. Reliable results which can hold up tochecks and comparisons have top priority.This is particularly important in the tradesbusiness since a burner is checked to see ifit fulfills legal requirements.Advantage: All the measuring equipmentincl. smoke tester in one caseAluminium case for instrument, probe and accessoriesProbes in lid make it easy to find parts in case0516 0306

testo 300 M, Set for adjusting small-scale burners91°CVol.% O2ppmCOVol. %CO2ppmNOλRecommended kit:testo 300 M, flue gas analyser, with rech. batt. and calibration protocolMeasures O2, CO2, CO (H2 compensated), effg/effn, draught/pressure,differential pressure, °CMains unit 230 V/ 8 V/ 1 A, for instrument (European plug)For mains operation and battery rechargingCompact flue gas probe, 300 mm immersion depth with cone, NiCr-Nithermocouple up to +500°C, built-in independent condensate trap and particlefilter, 2.2 m hoseMini amb. air probe, 60 mm imm. depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in sys. w. outside primary air intakesTesto printer with 1 roll of thermal paper and 4 AA size batteriesPrints readings on locationHose connection set, incl. silicone hose and connection adapterFor separate gas pressure measurementSoftCase (protects instrument from dirt and impact) made of plastic, with carrierstrap and magnetic plateSystem case for analyser, probes and accessoriesPart no.0563 03100554 10840600 95320600 97970554 05450554 03150516 03010516 0310∆PeffgeffnThe affordable testo 300 M flue gas analyseris also a high standard pressure meter. It canmeasure absolute and differential pressuresquickly and efficiently when used togetherwith the practical hose connection set.Advantage: Readings are printed quickly onsite by the cordless infrared printer.

92testo 300 XL, Set for control measurements on small-scale furnacesSoftware°CVol.% O2ppmCOVol. %CO2ppmNOλ∆PeffgRecommended kit:testo 300 XL, flue gas analyser, incl. rech. battery and calibration protocolMeasures O2, CO2, CO (H2 compensated), CO (ambient), effg/effn,draught/pressure, differential pressure, CH4, °C, differential temperaturePart no.0563 0300effnMains unit 230 V/ 8 V/ 1 A, for instrument (European plug)For mains operation and battery rechargingCompact flue gas probe, 300 mm immersion depth with cone, NiCr-Nithermocouple up to +500°C, built-in independent condensate trap and particlefilter, 2.2 m hose0554 10840600 9532Mini amb. air probe, 60 mm imm. depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in sys. w. outside primary air intakes0600 9797SoftCase (protects instrument from dirt and impact) made of plastic, with carrierstrap and magnetic plate0516 0301Barcode pen to read in measurement locationsQuick and accurate allocation of reading to site0554 0460Economical software, Windows® software for data management0554 0310With convenient analysis and graphics function, online measurement and barcode printouttesto 300XL is highly popular with heatingengineers because of its handy size,reliability and user-friendly operation. It hasTÜV approval in accordance with latestrequirements.Advantage: Customer data is read in via thebarcode pen which guarantees quick anderror-free allocation of the readings.RS232 cableConnects instrument to PC (1.8 m) for data transfer0409 0178The SoftCase protects the analyser fromimpact and dirt. The magnetic plate enableshands-free operation. The data, consisting ofup to 100 complete measurements (optionalmemory extension for 400 completemeasurements) can be saved in theinstrument.

93Technical dataTechnical data for both testo 300 M and testo 300 XL analysersProbe typeTemperaturemeasurementO2 measurementCO measurementCO2NO measurementEfficiencyFlue gas lossDraught/Pressure,diff. pressureMeas. range -40... +1200 °C0... +21 Vol.% O20... +8000 ppm CO0... CO2max Vol. %CO20... +3000 ppm NO0... +120 %0... +99.9 % qA-80... +80 hPaAccuracy± 1 digit±0.5% of mv(+100... +1200 °C)±0.5 °C (0... +99.9°C)±0.2 Vol.% O2 (0...+21 Vol.% O2)±5% of mv (+401...+2000 ppm CO)±10% of mv(+2001... +8000ppm CO)±20 ppm CO (0...+400 ppm CO)±5% of mv(+100.1... +2000ppm NO)±10% of mv(+2000.1... +3000ppm NO)±5 ppm NO (0...+100 ppm NO)±0.03 hPa (-80...+80 hPa)ResolutionReaction time0.1 °C (0... +999°C)1 °C (+1000...+1200 °C)0.1 Vol.% O2 (0...+21 Vol.% O2)40 s1 ppm CO (0...+8000 ppm CO)60 s0.1 Vol. % CO240 s 60 s1 ppm NO (0...+2000 ppm NO)0.1 % (0... +120%)0.1 % qA (0...+99.9 % qA)0.01 hPa (-80...+80 hPa)Overload ±1000 hPa (-80...+80 hPa)°CVol.% O2Reaction typeAccuracy class Class 1Dimensions 250x85x65 mmWeight700 gStorage temp. -20... +50 °COper. temp. +4... +45 °CMaterial/Housing ABSt90t90t90Additional technical data for testo 300 M:Memory: 20 data blocksPower via plug-in mains unit, batteries orexchangeable rechargeable batteriest90Warranty on testo 300 M / testo 300 XL:Analysers: 2 years (excluding working parts e.g.measuring cells)CO/NO measuring cell: 1 yearO2 measuring cell: 1 1/2 yearsppmCOVol. %CO2ppmNOλAdditional technical data for testo 300 XL onlyProbe typeMeas. rangeAccuracy± 1 digitResolutionCO probe0... +500 ppm CO±5% of mv (+100...+500 ppm CO)±5 ppm CO (0...+99 ppm CO)1 ppm CO (0...+500 ppm CO)Gas leak probe0... +10000 ppmCH4Additional technical data for testo 300 XL:Memory: 100 data blocksGas leak measurement for combustible gases withgas leak detection probe1st alarm limit: 200 ppm CH42nd alarm limit: 10,000 ppm CH4Optical display (LED) for 1st and 2nd alarm limit,audible alarm∆Peffgeffn