testo 300 M, professional flue gas analyser

testo 300 M, Set for adjusting small-scale burners91°CVol.% O2ppmCOVol. %CO2ppmNOλRecommended kit:testo 300 M, flue gas analyser, with rech. batt. and calibration protocolMeasures O2, CO2, CO (H2 compensated), effg/effn, draught/pressure,differential pressure, °CMains unit 230 V/ 8 V/ 1 A, for instrument (European plug)For mains operation and battery rechargingCompact flue gas probe, 300 mm immersion depth with cone, NiCr-Nithermocouple up to +500°C, built-in independent condensate trap and particlefilter, 2.2 m hoseMini amb. air probe, 60 mm imm. depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in sys. w. outside primary air intakesTesto printer with 1 roll of thermal paper and 4 AA size batteriesPrints readings on locationHose connection set, incl. silicone hose and connection adapterFor separate gas pressure measurementSoftCase (protects instrument from dirt and impact) made of plastic, with carrierstrap and magnetic plateSystem case for analyser, probes and accessoriesPart no.0563 03100554 10840600 95320600 97970554 05450554 03150516 03010516 0310∆PeffgeffnThe affordable testo 300 M flue gas analyseris also a high standard pressure meter. It canmeasure absolute and differential pressuresquickly and efficiently when used togetherwith the practical hose connection set.Advantage: Readings are printed quickly onsite by the cordless infrared printer.