1-045 Comp ession Latch Pr 14.1 r 1-05

1-095 Quarter-Turn Pr20.1 L18PolyamidePolyamide Quarter-Turn• Double insulated.• RH or LH application.• Pre-assembling by DIRAK isadvisable.• A pre-assembled Quarter-Turn can beinstalled in the cutout.Material:• Housing, insert and cam:PA, black04/12/2010© copyright by DIRAK / GermanyQuarter-Turna) Housing Part No. see pagez) with nut PA (black) 200-9077a) with nut steel (zinc plated) 200-9003a) with nut stainless steel 200-9044b) InsertSquare 7 200-9155Square 8 200-9156Triangular 8 200-9158Double bit 3 pin 200-9159Double bit 5 pin 200-9160Slotted 2x4mm deep 200-9161Wing knob 200-9173Slotted recessed coinproof 200-9186Crescent Czech 200-9184c) Cam (further cams on request)H in mm18 200-531820 200-532022 200-532225 200-532528 200-5328c1) Cam, steel zinc plated 02.58Optional:Water- and dust-tight according to IP65 by:O-Ring 200-1001e) Flat external seal 200-0901d) For IP66/67 use additional O-Ring. 200-1002f) Assembling 200-0001Assembling with O-ring 200-0002g) Assembling cam 90° to wing knob without O-ring 200-0019Assembling cam 90° to wing knob with O-ring 200-0021DIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.com02.30

1-115 Handle for Quarter-Turnassembled afterwards• The shown Knobs and Handles forQuarter-Turns, can be assembledafterwards for easier transport andpackaging (flush).• All screws are included.Material:• Handle:PA, black• Basic insertzinc die, zinc platedDIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.com04/12/2010© copyright by DIRAK / GermanyQuarter-TurnPart No.a) T-Handle with cover and screw 200-9134b) Star knob with cover and screw 200-9135c) Wing-Knob with cover and screw 200-9136d) Please order separately:Basic insert with internal M6 thread at both ends. 200-913702.36

www.dirak.com1-130 Quarter-Turn with Wing Pr20.1 L18with CylinderWing Handle with 90° rotation,RH or LH application.. The Wing Handle consistsof two basic componentswhich can be combined tosuit your application.. On request cam can beassembled by DIRAK.. A pre-assembledWing Handle can beinstalled in the cutout.Material:refer to descriptionslistednon locking keyed alike keyed-(with blank) DIRAK 1333 DS200 different/mixeda) Wing Handle consists of: 200-93011) 200-93022) 500-93022) 200-93032)• Handle part PA: with zinc die core• Cylinder barrel: zinc die• or blank: PA (black)• Housing: zinc die (black coated)• Plain/grounding/earthing nut: zinc diea1) Wing Handle as a), buthandle, housing, barrel or plugmade of PA (black) with• Nut steel (zinc plated) 200-93681) 200-93691) - 200-93701)• Nut PA (black) 200-93711) 200-93721) - 200-93731)b) Cam steel (zinc plated) see product system 1-100 or 1-262b1) Cam PA (black) see product system 1-095Optional:c) Assembling cam as drawn 200-0001Assembling cam 90° to handle 200-00191) Water- and dust-tight according to IP652) With stainless dust-shutter12/15/08

Wing Handle for PadlockScrew-in typePage1 - 132Wing-Handle for padlockwith 90º rotation, Screw-intype, RH or LH application.• Water- and dust-tightaccording to IP65.• This Wing Handle consistsof two basic parts whichcan be combined to suityour application.• On request cam can beassembled by DIRAK.• A pre-assembledWing Handle can beinstalled in the cutout.• Padlock feature onlywhen cam is at 90º tothe handle.Part No. E-coated Textured Powdera) Wing Handle chrome plated black blackwith plain/grounding/earthing nutL = 18 (door thickness max. 8mm) 200-9364 200-9365 200-9365.TXL= 40(door thickness max. 30mm) 100-9310 100-9311 100-9311.TXMaterial:a)• Wing Handle: completezinc die, chrome plated orblack coated• Housing: zinc die,zinc platedb)• Cam: steel, zinc platedb) One- two- or three point cams on page 1-100, 1-110 or 1-262Optional:c) Assembling for right door, as drawn 200-0019Assembling for left door 200-0020Wing Handle s/s AISI 316 on page 7-085.D 25/05/04A 1/15/03© copyright by DIRAK / Germany

www.dirak.com1-140 Quarter-Turn with Wing Pr20.1 L18with CylinderT-Handle with 90° rotation,RH or LH application.. Water- and dust-tightaccording to IP65.. This T-Handle consists oftwo basic parts which canbe combined to suit yourapplication.. On request cam can beassembled by DIRAK.. A pre-assembled T-Handlecan be installed in thecutout.a) T-Handle PA with zinc die zinc diewith plain/grounding/earthing nut zinc die core chrome plated black coatednon locking 200-9307 200-9319 200-9331keyed alike DIRAK 1333* 200-9308 200-9320 200-9332keyed alike DS200* 500-9308 500-9320 500-9332keyed different/mixed 200-9309 200-9321 200-9333PAGODA keyed alike - 501-9320 501-9332PAGODA keyed different/mixed - 501-9321 501-9333Material:a). T-Handle: PA, black withzinc die core or zinc die,chrome plated or blackcoatedb). Cam: steel, zinc platedb) Cam/3-point cam see product system 1-100 or 1-262Optional:c) Assembling cam as drawn 200-0001Assembling cam 90° to handle 200-0019All lockable T-Handles are supplied with 2 keys.Stainless steel version see product system 7-090.* With stainless dust-shutter12/15/08

1-142 Quarter-Turn with Wing Pr20.1 L18with cylinderQuarter-Turn with Wing• RH or LH application.• Water- and dust-tight according toIP65 DIN EN 60529.• The Quarter-Turn consists of twobasic components which can becombined to suit your application.• On request parts can be assembledby DIRAK.• A pre-assembled Quarter-Turn can beinstalled in the cutout.Material:a)• Wing handle:zinc die, nickel platedb)• Cam:steel, zinc plated• Other surfaces i.e. chrome plated,black on request!DIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.com04/12/2010© copyright by DIRAK / GermanyQuarter-Turna) Wing Handle with plain grounding/earthing nut Part No. see pagenon locking 100-9306keyed different/mixed 100-9307keyed alike DIRAK 1333* 100-9308with insert square 8** 100-9309.00-00001b) Cam/3-point cam 02.61, 03.37, 02.58Please order separately:c) Assembling 200-0001 02.45Assembling cam 90° to wing knob without O-ring 200-0019 02.45All lockable handles supplied with two keys.* with stainless dust-shutter** Here we have 12 types of inserts. Please contact DIRAK.02.45

www.dirak.com1-400 3-Point Latchfor Quarter-Turn Cutoutwww.dirak.com1-400 3-Point Latchfor Quarter-Turn Cutouta) Rod-Latch for Round Rod Ø8mm Stroke 13 Stroke 18RH version (as drawn) 235-9001 235-9003LH version 235-9002 235-9004a1) Rod-Latch for Round Rod threaded M8RH version 235-9005 235-9007LH version 235-9006 235-9008b) Latch support for RH and LH versionA20 235-1001A26 235-1002c) Inserts with screw M6x10Square 6 235-9101Square 7 235-9102Square 8 235-9103Triangular 6.5 CNOMO 235-9104Triangular 7 235-9105Triangular 8 235-9106Double bit 3mm pin 235-9107Double bit 5mm pin 235-9108Daimler Benz 235-9109d) Escutcheon for double bit onlyA20 235-9201A26 235-9202d1) Escutcheon for all other insert variationsA20 235-9203A26 235-9204e) Rod Guide see product system 1-190A20 200-3601.03A26 200-3602.03f) Round Rod with rollers see product system 1-170. To be cutto lenght. L in mm: 400 201-9001500 201-9020-0500600 201-9002700 201-9020-0700800 201-9003900 201-9020-09001000 201-90041100 201-9020-11001200 201-9005Customized lengths see product system 1-180f1) Round Rod Ø8 threaded M8. Length L=1000 201-0801-1000Rod-Latch system Screw-inor Weld-on. Heavy dutyversion.Material:a) und a 1 ). Rod-Latch: steel, zincplated and zinc dieb). Latch support: steel, zincplatedc). Insert: zinc die, chromeplatedd) und d 1 ). Escutcheon: zinc die,chrome platede). Rod Guide: PA, blackf) und f 1 ). Round Rod: steel, zincplatedOptional:Water- and dust-tight according to IP65 by:g) O-Ring 200-1001h) Flat external seal 200-0901Swinghandles see product system 2-300.T- and L-Handle see product system 1-430.12/15/08

Handlesfor all Rod-Latches of 235-seriesPage1 - 430T- and L-Handle forRod-Latches on pages1-400, 1-405, 1-410 or1-415.• Water- and dust-tightaccording to IP65.a) T-Handle A20/H22 A26/H28chrome plated black coated chrome plated black coatednon locking 235-9501 235-9503 235-9502 235-9504keyed alike DIRAK 1333 * 235-9505 235-9507 235-9506 235-9508keyed alike DS200 * 535-9505 535-9507 535-9506 535-9508keyed different/mixed 235-9510 235-9512 235-9511 235-9513Material:• Handles: zinc die, chromeplated or black coated• Square pin: steel,Zinc plated• Bezel: zinc die,chrome plateda1) T-Handle with PAGODA Lockkeyed alike 1991 501-9505 501-9507 501-9506 501-9508keyed different/mixed 501-9510 501-9512 501-9511 501-9513b) L-Handle A20/H22 A26/H28chrome plated black coated chrome plated black coatednon locking 235-9601 235-9603 235-9602 235-9604keyed alike DIRAK 1333 * 235-9605 235-9607 235-9606 235-9608keyed alike DS200 * 535-9605 535-9607 535-9606 535-9608keyed different/mixed 235-9610 235-9612 235-9611 235-9613b1) L-Handle with PAGODA Lockkeyed alike 1991 501-9605 - 501-9606 -keyed different/mixed 501-9610 - 501-9611 -All locks supplied with 2 keys.Fitting hardware and seals for IP65 are included.Rod-Latches with accessories on page 1-400, 1-405, 1-410 or 1-415.* With stainless dust-shutterD 20/07/04A 1/15/03© copyright by DIRAK / Germany

www.dirak.de1-600 Drehriegelmit Knebel und KugelrastungDrehriegel mit Kugelrastung.. Andere Schließwege bzw.andere Zungen / Knebelstellungen:Auf AnfrageWerkstoff:a). Knebelbetätigung:GDZn, schwarzb). Gehäuse: GDZn,verchromtc). Zunge: Stahl, verzinktd). Befestigungsfeder:Stahl, verzinktA) Drehriegel mit Mutter 290-9305 B) Drehriegel mit Mutter 290-9306*Drehriegel Drehriegel mit Befestig.-feder d) 290-9302*mit Befestigungsfeder d) 290-9301 C) Drehriegel mit Mutter 290-9311Weitere H-Maße auf Anfrage Drehriegel mit Befestig.-feder d) 290-9312Weitere H-Maße auf Anfrage.*Preise und Lieferzeit auf Anfrage.Diese Ausführungen in Kombinationmit dieser Einbauöffnung garantiereneine eindeutige und immer gleicheEinbausituation.Diese Versionen können auch mit der linksgezeichneten Einbauöffnung verwendetwerden.28.02.08

www.dirak.de1-630 Drehriegel L20.8mit Knebel und KugelrastungDrehriegel mit Kugelrastung.. Zungen für andere H-Maßebitte bei DIRAK anfragen.Werkstoff:. Knebel und Gehäuse:PA, schwarz. Zunge: Stahl, verzinktDrehriegela) mit Mutter, Türstärke max. 5mm 290-9308b) mit Befestigungsfeder, Türstärke max. 1,5mm 290-9309mit Befestigungsfeder, Türstärke max. 2,3mm 290-9310Bestellnummern für alternative Zungenpositionen auf Anfrage.28.02.08

7-085 Quarter-Turn with Wing Pr20.1 L18stainless steel AISI 316Wing handle for padlock.• Screw-in type• RH or LH application.• Water- and dust-tight according toIP65 DIN EN 60529.• The Quarter-Turn consists of twobasic components which can becombined to suit your application.• A pre-assembled Quarter-Turn can beinstalled in the cutout.• Padlock feature only if cam is at90° to the handle.Material:• Wing-Handle:stainless steel, finish:polished• Housing, nut and cam:stainless steelStainless Steel04/12/2010© copyright by DIRAK / GermanyPart No.see pagea) Wing-Handle 200-9375with standard nutb) Cam 10.10, 10.12, 02.58, 02.61Optional:c) Assembling for right door 200-0019Assembling for left door 200-0020DIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.com10.14

7-090 Quarter-Turn with Handle Pr20.1 L18stainless steel AISI 316Quarter-Turn with T-Handle.• RH or LH application.• Water- and dust-tight according toIP65 DIN EN 60529.• The Quarter-Turn consists of twobasic components which can becombined to suit your application.• On request parts can be assembledby DIRAK.• A pre-assembled Quarter-Turn can beinstalled in the cutout.Material:• T-Handle:stainless steel, finish: polished• Nut and cam:stainless steel04/12/2010© copyright by DIRAK / Germanya)T-Handle with standard nut Part No. see pagenon locking 200-9374keyed alike 1333 200-9398keyed different/mixed 200-9399DIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.comStainless Steelb) Cam 10.10, 10.12, 02.58, 02.61Please order separately:c) Assembling cam in line with handle 200-0001Assembling cam 90° to handle 200-0019All lockable handles supplied with two keys.10.16

7-095.02 Quarter-Turn with Wing Pr20.1 L30/50stainless steel AISI 304T-Handle with extended housing.• Maximum door-thickness 20mm /40mm.• RH and LH application.• Single-sided grounding/earthing nut.• Water- and dust-tight according toIP65 DIN EN 60529.• Pre-assembled without cam.• Further housing lengths on request.Material:• Handle:stainless steel, satin polished• Housing, grounding/earthing nutand adapter:stainless steel• Flat external seal:NBR, black04/12/2010© copyright by DIRAK / GermanyDIRAK GmbH Königsfelder Str. 1 D-58256 EnnepetalPhone:+49 (0) 2333.837-0 Fax: +49 (0) 2333.837-100 www.dirak.comLength of 4-hole housing GL 30 50 see pageDoor thickness TS 20 40a) T-Handle with standard nutnon locking 100-9401* 100-9404*keyed alike 1333 100-9402* 100-9405*keyed different/mixed 100-9403* 100-9406*b) Cam 10.10, 10.12, 02.58, 02.61Please order separately:c) Assembling cam in line with handle 200-0001 200-0001Assembling cam 90° to handle 200-0019 200-0019Stainless SteelAll lockable handles supplied with two keys.* Price and delivery time on request10.15