View Nissan Catalog - Adrian Steel

NV CARGO PARTITIONSADRIAN STEEL PARTITIONS KEEP CARGO WHERE IT BELONGS, IN THE CARGO AREA!Stamped steel partitions are available for both Nissan NV Cargo Standard and High Roof vans. The perforated panels allowfor side and rear visibility, while increasing cab area climate control. Max Comfort Wing Kits allow for 3 inches of additionalfront seat adjustability for more cab and leg room. Partition accessories can be attached for easy reach.S1 SolidS2 Perforated TopPanels mountbehind driverseat.M1 SolidM2 Perforated TopFixed centerpanels can behinged as keylockingdoorsC1 SolidC2 Perforated TopPanels mountbehindpassenger seatMax Comfort Wing KitPartition setback allowsfor 3” of additional frontseat adjustability for morecab and leg room.(Reduces cargo space by 3”.)S-M-C Series PartitionsChoose from solid or perforated top panels made from 18-gauge steel for strength andfinished in a tough Steel-Cote powder coat paint. Center M panels can be fixed orhinged with a key-locking door. Partitions are sold as panel kits and wing kits. Pleasesee application chart to confirm the appropriate panel kit and wing kit for your vehicle.Partition panel kits and wing kits include assembly and installation fasteners for basevan trim level. Higher trim levels may require modifying trim or partition.Shown: S1M2C2FSV High roof partitionwith WKC1LCVH wing kit.Note: Extended wing kits reduce the amount of cargo space. Please confirm the interior layout of the van packageto confirm that the extended wing kit has adequate room needed for installation.Panel Kit Part NumberFixed Center PanelSOLID PANELSS1M1C1FSVCENTER PANEL PERF. TOP ONLYS1M2C1FSVPERF. CENTER & CURB PANELSS1M2C2FSVALL PANELS PERFORATEDS2M2C2FSVInteriorLong PartStorageNV CARGO16Shown: S1M2C2FSV Standard roofpartition with WKC1LCVS wing kit.wing kit.www.adriansteel.comHinged Center Panel “Door”SOLID PANELSS1M1HC1FSVCENTER PANEL PERF. TOP ONLYS1M2HC1FSVPERF. CENTER & CURB PANELSS1M2HC2FSVALL THREE PANELS PERFORATEDS2M2HC2FSVWing KitsSTANDARD ROOFWKC1LCVS - MAX CARGOWKC1LCVS3 - MAX COMFORTHIGH ROOFWKC1LCVH - MAX CARGOWKC1LCVH3 - MAX COMFORTCarry 10 feet of conduit or pipe inside your NVCargo with the Long Part Storage Kit!The modified middle partition panel has an extended boxwhich has a 13 ¾” wide by 5 ¾” high opening in the Mpanel. Tie down straps are provided at the front and therear of the product to secure the load. The rear tray is positionedto contain the cargo and protect the rear doors. Fitslate model Adrian Steel SMC partitions only. Not compatiblewith hinged door partition option.ModelM1FLPM2FLPS1M1C1FLPS1M2C1FLPS1M2C2FLPDescriptionM1 panel w/Long Parts Storage KitM2 panel w/Long Parts Storage KitS1M1C1 Panel Kit w/Long Parts Storage KitS1M2C1 Panel Kit w/Long Parts Storage KitS1M2C2 Panel Kit w/Long Parts Storage Kit