Product Catalogue 2009/2010 - EuroArc

MIG/MAG multi-process welding machinesalpha Q Optimised weld seam design modified for the process –reduced seam volume due to smaller included angles for theedge preparation, and in some cases, total elimination of edgepreparation Cost-effective standard accessories and welding materials – Lower manufacturing costs for the entire joining process –reduction in preparation and finishing work as well as costsavings for wages, welding materials, gas and electrical energy Significant time savings create increased manufacturing capacitiesfor new contracts – increase turnover and shorten deliverytimes Standard in all and welding machinesfor manual, mechanised and automated applications Additional cost-saving potential when using the EWM MT torch applies to spare and replaceable parts as well.Secure root formation with theideal seam geometry tion of the throat thickness or safe handling tain penetration irrespective tanceParticularly advantageous, e.g.with very narrow joints and filletwelds as well as dynamicallyloaded components andhard to reach areasEconomic – virtually spatterfreeweldingwith highly dynamic controltechnology materials and shielding gasessimple coatingration and finishing work,reduction in wear and tear offinishing materials, offeringvery high potential for savingsQuality, load capacity, operatingsafetytion in welding failures andcold lapsDirectionally stable, smootharc stickout lengths up to 40 mmarc length and directioncaused by changes in wirestickout lengthParticularly advantageous, e.g.for very narrow joints and filletweldsEWM HIGHTEC WELDING GmbH Tel.: +49 2680 181-0, Fax.: -144 www.ewm-group.com PK 2009/2010 A211