Cisco Unified Communications Manager 9.1 ... - Sonus Networks

SBC 5000 Series Configuration Guide 21The output of show command for numbering plan is as given below:admin@CUSTSBC% show profiles digitParameterHandling numberingPlanCUST_NUM_PLANprefixProfile CUST_PP;lengths {nationalNumber {min 0;max 0;}subscriberNumber {line {min 0;max 0;}min 0;max 0; }exchangeCode {min 0;max 0;}areaCode {min 0;}max 0;}5) DM/PM RuleCreate DM/PM (digit/parameter manipulation) rule and apply it to ingressDmPmRule onsip trunk group towards IP-PBX side. The purpose of this DM/PM rule is to convert 4-digit‘Subscriber Number’ received in ‘Diversion’ header into 10-digit TN by prefixing with NPA-NXX. This configuration will change based on the customer’s DDI range assigned by AT&T.This must be AT&T IPFR recognizable TN.The below example shows the conversion of 978-303-XXXX TNs, where subscriber numbers(XXXX) are getting prefixed with 978-303 (NPA-NXX).set profiles digitParameterHandling dmPmCriteria RDN_Exists criteriaType digit digitType redirectingparameterPresenceCheck existsset profiles digitParameterHandling dmPmRule RDN_Change subRule 0 criteria RDN_Exists ruleType digitdigitManipulation numberType originalCalledNumber digitStringManipulation replacement type constant digitStringcallingNumber numberOfDigits 10 value 978303Copyright © © 2013, 2013, Sonus Sonus Networks, Networks, Inc. All rights Inc. All reserved. rights reserved.