Cisco Unified Communications Manager 9.1 ... - Sonus Networks

SBC 5000 Series Configuration Guide 29The output of show command for zone is as given below:admin@CUSTSBC% show addressContext IPDOMAIN zone CUST_ZONEid 2;4) SIP Signaling PortCreate Sip Signalling Port with signaling ip/prefix of SBC to be used on customer side andassign it to IP interface group.ParameterDescription172.16.104.164 SIP signalling IP address of SBC towards customer5060 SIP signalling port of SBC towards customerset addressContext IPDOMAIN zone CUST_ZONE sipSigPort 1 ipInterfaceGroupName CUSTIFG ipAddressV4172.16.104.164 portNumber 5060set addressContext IPDOMAIN zone CUST_ZONE sipSigPort 1 ipInterfaceGroupName CUSTIFGtransportProtocolsAllowed sip-udp,sip-tcpset addressContext IPDOMAIN zone CUST_ZONE sipSigPort 1 mode inService state enabledcommitThe output of show command for sip signaling port is as given below:admin@CUSTSBC% show addressContext IPDOMAIN zone CUST_ZONE sipSigPort 1ipInterfaceGroupName CUSTIFG;ipAddressV4 172.16.104.164;portNumber 5060;modeinService;stateenabled;transportProtocolsAllowed sip-udp,sip-tcp;5) IP PeerCreate an IP Peer with signaling IP address of customer IP-PBX and assign it to customerzone.ParameterCUST_IPPDescriptionIP Peer name for customer IP-PBXset addressContext IPDOMAIN zone CUST_ZONE ipPeer CUST_IPP ipAddress 172.16.102.24 ipPort 5060commitCopyright © © 2013, 2013, Sonus Sonus Networks, Networks, Inc. All rights Inc. All reserved. rights reserved.