Cat® Multipurpose Grease

Cat Multipurpose GreaseGrease Selection Guide*Cat Ultra 5Moly GreaseNLGI 1(-35° to 40°C / -31° to 104°F)With 5% molyCat Desert Gold GreaseNLGI 2(Temp up to 60°C / 140°F)With 5% molyCat Advanced 3Moly GreaseNLGI 2(-20° to 40°C / -4° to 104°F)With 3% molyCat High Speed Ball Bearing GreaseNLGI 2(Temp above -20°C / -4°F)Without molyCat Ultra 5Moly GreaseNLGI 2(-30° to 50°C / -22° to 122°F)Cat Arctic Platinum GreaseNLGI 0(Temp down to -50°C / -58°F)Cat Multipurpose GreaseNLGI 2(-30° to 40°C / -22° to 104°F)With 5% molyWith 5% molyWithout molyWorkingEnvironmentHigh LoadHigh TempLow TempMedium LoadLow LoadLow LoadAnd High Speed*All temperatures are ambient.Typical Characteristics*NLGI # 2Ambient Range –30° to +40° C/–22° to +104°Operating Range –32° to +149° C/–25° to +300°Base Fluid TypePetroleumThickener TypeLithium ComplexColorBlue% Molybdenum disulfide 0Worked Penetration (mm) 265-295% Change/100,000 stroke –5 to +15Roll Stability w/H 2 O, % changeN/AViscosity Index, MinN/AViscosity @ 100° C, cSt 19.5-22.5Viscosity @ 40° C, cSt 230-2454 Ball Wear (mm) Max, Typ. 0.754 Ball E.P. Weld Point (kg) Min. 315Timken E.P. Test OK load (lb) Typ. 55*Oxidation – psi drop/500 hr MaxN/ARust TestPassCopper Corrosion1bDropping Point +260° C (+500° F)* The values shown are typical values and should not be used as quality control parameters to eitheraccept or reject product. Specifications are subject to change without notice.Health and SafetyFor information on proper use forhealth, safety, and environment,please refer to the Material SafetyData Sheet (MSDS). Read andunderstand the MSDS before usingthis product. Always observe goodhygiene measures. For a copy of theMSDS, contact us or visit the webat www.catmsds.com.CAT ® DEALERS DEFINE WORLD-CLASS PRODUCT SUPPORT.We offer you the right parts and servicesolutions, when and where you need them.The Cat Dealer network of highly trainedexperts keeps your entire fleet up and runningto maximize your equipment investment.PEHJ0088-01www.cat.com© 2007 Caterpillar • All Rights Reserved • Printed in USACAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well ascorporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.