Schneider Electric Training Courses 2012

984 Ladder Logic - Level 1Four-day Instructor-led Course53Course DescriptionThe course aims to develop in the participant the skills and knowledge neededto maintain and fault find a Modicon programmable controller system on a typicalapplication. Emphasis is placed on creating programs using the basic instruction set.DurationFour-day instructor-led course, with lunch provided.Audience▪ Project/ design/ programming engineers Electrical maintenancepersonnel40%Practical60%TheoryPrecursors▪ The course content as listed is suitable for participants whohave Electrical/Electronic Trade Qualifications or higher withsome exposure to digital electronics but little or no experiencewith Modicon PLC’s▪ Student should choose between NxT and ProWORX32 priorthe training courseBasicProductIntermediateSolutionsAdvancedFundamentals984 Ladder Logic - Level 1 Course OutlineDay 1 of 4Day One focuses on hardware and software setup:▪ Modicon System Hardware▪ Modicon Series Controllers▪ Local I/O▪ Remote I/O▪ I/O ModulesDay 2 of 4Day Two focuses on the basic instructions,Timer & Counters & Forcing:▪ Configuring the Controller, Traffic-Copping (I/O Mapping) the Controller▪ Theory of Operation, Node, Network,Power Flow, SegmentationDay 3 of 4Day Three focuses on maintenance activitiessearching and fault finding and we introducearithmetic Instructions ADD & SUB and analog inputand analog output routines:▪ Basic Instruction Set, Up/Down Counters,Timers, Common Control, Techniques▪ Add, Subtract, Multiply, Divide Practical▪ Practical exercisesDay 4 of 4Day Four continues arithmetic instructions MUL &DIV then introduce the data transfer instructions andonly include the BLKM Instruction:▪ Best practice implementation of 984LL▪ Theory of Operation, Table to Register,Register to Table, Table to Table,▪ Block Move, Practical Exercise No. 3Part number:SAUTR1013Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: training.courses@au.schneider-electric.com