PRODUCT WITH CATAS CERTIFICATION (CQA) 100% MADE IN ...

PRODUCT WITH CATAS CERTIFICATION (CQA)
100% MADE IN ITALY
completely Made in Italy
with manufacturing and materials
of exclusive Italian origin
WE SUPPORT THE ITALIAN SOCIETIES

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
111354/1
Date Received: 03-12-09
Date of test: 10-12-09
Date of issue: 15-12-09
Sample Name:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Divan-Bed Seat Composite – Mod. PIPPO
Description of the tested materials as declared by the customer
Inner Covering
Fabric.
The tested side is on view
Padding:
- Wadding coupled;
- Development Polyurethane.
Smoulding Cigarette EN 1021-1:2006
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Pre-treatment
The covering was undergone to the softening process in water and to the drying (Appendix D) before being conditioned for at least 24 hours at the
temperature 23 ± 2 % and at the relative humidity of 50 ± 5%
Tests Results
No ignition
Criterion of ignition Cigarette
1 2 Remarks
Smouldering criteria
Unsafe escalating combustion [3.1 a)] No No -
Test assembly consumed [3.1 b)] No No -
Smoulders to the extremities [3.1 c)] No No -
Smoulders through thickness [3.1 c)] No No -
Smoulders more than 1 hour [3.1 d)] No No -
In the final examination presence
of active smouldering [3.1 e)] No No -
Flaming criteria
Occurrence of flames [3.2] No No -
Yes: Ignition No: Non Ignition
The above test results relate only to the ignitability of the combination of the materials under the particular conditions of test; they are not intended as
a means of assessing the full hazard of the materials in use.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
111356/1
Date Received: 03-12-09
Date of test: 10-12-09
Date of issue: 15-12-09
Sample Name:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Divan-Bed Mattress Composite – Mod. PIPPO
Description of the tested materials as declared by the customer
Product: Spring Mattress
Covering:
Cotton weft fabric.
Padding:
- Wadding coupled;
- Development Polyurethane.
Tests Results
No ignition
Smoulding Cigarette EN 597-1:1994
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Criterion of ignition Test nr. Cigarettes Position
1 2
Smouldering criteria
Unsafe escalating combustion [3.1 a)] No No In correspondence of
Full consumption of the test sample [3.1 b)] No No the border,
Smoulders through thickness [3.1 c)] No No of the quilting
Smoulders more than 1 hour [3.1 d)] No No of the flat surface and
Carbonization on distance > 50 mm from the source [3.1 e)] No No on the flat surface
Flaming criteria
Occurrence of flames [3.2] No No as above
Yes: Ignition No: Non Ignition
The above test results relate only to the ignitability of the combination of the materials under the particular conditions of test; they are not intended as
a means of assessing the full hazard of the mattress, mattress pad or upholstered bed base in use.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/1
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Leg forward static load test par. 6.12
Test results:
Forward horizontal force
N
Notes:
500
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Vertical balancing force
N
1.000
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
The test has been performed according the prospectus 1 of the ENV 12520:2000.
Leg forward static load test EN 1728:2000
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Number of cycles Remarks
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
10
No defects
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/2
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Leg sideways static load test par. 6.13
Test results:
Lateral horizontal force
N
Notes:
350
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Vertical balancing force
N
1.000
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
The test has been performed according the prospectus 1 of the ENV 12520:2000.
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
Leg sideways static load test EN 1728:2000
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Number of cycles Remarks
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
10
No defects
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/3
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Seat and back static load test par. 6.2.1
Test results:
Seat force
N
1.300
Seat front edge static load test par. 6.2.2
Notes:
Seat force
N
1.300
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Back force
N
410
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
Seat and back static load test EN 1728:2000
Number of cycles Remarks
The test has been performed according the prospectus 1 of the ENV 12520:2000.
The test has been performed at the same time on two positions.
10
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Number of cycles Remarks
10
No defects
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
No defects
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/4
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Combined seat and back fatigue test par. 6.7
Test results:
Notes:
Seat force
N
1.000
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Back force
N
300
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
Combined seat and back fatigue test EN 1728:2000
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Number of cycles Remarks
20.000
The test has been performed according the prospectus 1 of the ENV 12520:2000.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
No defects
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/5
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Seat front edge fatigue test par. 6.8
Test results:
Point of application of the
seat
80 mm from the front and
side edges
Notes:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Seat force
N
1.000
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Seat front edge fatigue test EN 1728:2000
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Number of cycles Remarks
20.000
The test has been performed according the prospectus 1 of the ENV 12520:2000.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
No defects
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
109700/6
Date Received: 15-10-09
Date of test: 23-10-09
Date of issue: 30-10-09
Sample Name:
Kind of chair: Chair with fixed geometry
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
PIPPO 3P ROLLER
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Minimum value of force for the backward stability of seats with fixed backrest: 378 N
Stability EN 1022:2005
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Forward unbalancing
Horizontal force : 40 N It does not lose its balance
Backward unbalancing
Fixed backrest
Horizontal force : 378 N It does not lose its balance
Reclining backrest in the most far back position
Load discs applied on the chair : //
Side unbalancing
Horizontal force : 20 N It does not lose its balance
Side unbalancing of seats with arms
Horizontal force : //
Forward unbalancing of seats with foot rest
Horizontal force //
The test results meet the requirements of the Directive EN 1022
* The test has been performed at the same time on two positions.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
Date Received: 15-10-09
Date of issue: 30-10-09
The report is made up of 6 attachments
Defects discovered before the test: any
Sample name: PIPPO 3P ROLLER
Performed tests list
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
1. Leg forward static load test
2. Leg sideways static load test
3. Seat and back static load test
4. Combined seat and back fatigue test
5. Seat front edge fatigue test
6. Stability
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
TEST REPORT NR. 109700
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

Montebelluna, 6 October 2010
SUBJECT: REACH.
Dear Customer,
SAMAC
Via Della Madonnina, 10/a – 301044 Montebelluna (TV)
Tel: +39/0423/600448-601770 – Fax: +39/0423/601158
p. iva IT00806250254 – C.F. 00550430268
www.samacitalia.it – info@samacitalia.it
Capitale sociale € 10.400,00 I.V.
with refer to Reach Regulation we inform You that S.A.M.A.C. SRL:
1) supplies EEC products considered articles which do no release substances, and therefore are not subject to the
obligation of Pre-Registration and Registration nor to the obligation of drawing up or modification of safety data sheets,
2) supplies also EXTRA EEC products considered articles which do not release substances. For these articles
S.A.M.A.C. SRL asked its suppliers to guarantee the supply of articles not containing substances of very high concern
(SVHC). Furthermore, S.A.M.A.C. SRL is going to carry out periodically the necessary tests in order to exclude the
presence of substances of very high concern.
From the responses we got until now we can assure that S.A.M.A.C. articles don’t contain substances of very high
concern (SVHC).
S.A.M.A.C. SRL commits itself to inform immediately its customers in case the presence of the above mentioned
substances is detected.
S.A.M.A.C. SRL finally confirms its attention and commitment to comply immediately to the evolution of REACH.
Best Regards,
S.A.M.A.C. SRL

Montebelluna, 6 October 2010
SUBJECT: REACH.
Dear Customer,
SAMAC
Via Della Madonnina, 10/a – 301044 Montebelluna (TV)
Tel: +39/0423/600448-601770 – Fax: +39/0423/601158
p. iva IT00806250254 – C.F. 00550430268
www.samacitalia.it – info@samacitalia.it
Capitale sociale € 10.400,00 I.V.
with refer to Reach Regulation we inform You that S.A.M.A.C. SRL:
3) supplies EEC products considered articles which do no release substances, and therefore are not subject to the
obligation of Pre-Registration and Registration nor to the obligation of drawing up or modification of safety data sheets,
4) supplies also EXTRA EEC products considered articles which do not release substances. For these articles
S.A.M.A.C. SRL asked its suppliers to guarantee the supply of articles not containing substances of very high concern
(SVHC). Furthermore, S.A.M.A.C. SRL is going to carry out periodically the necessary tests in order to exclude the
presence of substances of very high concern.
From the responses we got until now we can assure that S.A.M.A.C. articles don’t contain substances of very high
concern (SVHC).
S.A.M.A.C. SRL commits itself to inform immediately its customers in case the presence of the above mentioned
substances is detected.
S.A.M.A.C. SRL finally confirms its attention and commitment to comply immediately to the evolution of REACH.
Best Regards,
S.A.M.A.C. SRL

EUROLAB Analysis Laboratory
Test Report Nr. 28309 Pag. 1 of 4
On 29 April 2010 Customer
SAMAC SRL
VIA DELLA MADONNINA, 10/A
31044 MONTEBELLUNA (TV)
Sample description PU ROLL EMBOSSED WITH LEATHER BACKING RED
Sample coming from SAMAC SRL
VIA DELLA MADONNINA, 10/A
MONTABELLUNA (TV)
Sample ID. Synthetic leathers
Sample performed by: Customer
Date received: 29/03/2010 Test start date: 29/03/2010 Test end date: 29/04/2010
Subject: Quality check
Job code: 8448
Test M.U. Result Test Method
Phthalates EPA 3541 1994 + EPA 8270 D 2007
Bis (2-ethylhexyl) phthalate (DEHP g/100g

EUROLAB Analysis Laboratory
Test Report Nr. 28309 Pag. 2 of 4
Test M.U. Result Test Method
Arsenic mg/kg

EUROLAB Analysis Laboratory
Test Report Nr. 28309 Pag. 3 of 4
Test M.U. Result Test Method
2-naphthylamine mg/kg

EUROLAB Analysis Laboratory
Test Report Nr. 28309 Pag. 4 of 4
Test M.U. Result Test Method
Head of Laboratory
Dott. Massimo Peruzzo
This report related to the sample submitted for the test and no others, and it can’t be partially reproduced unless written approval
from the laboratory.
EUROLAB s.r.l. via Mons. Rodolli, 22 - 36022 S. Giuseppe di Cassola (VI) Tel. 0424/570233 –
Fax 0424/570948 – e-mail: info@labeuro.com Cap. Soc. 10.400 euro i.v. - CF. Reg. Imp. VI e P.IVA 02165880242 –
REA nr. 211103/VICENZA

100% MADE IN ITALY
completely Made in Italy
with manufacturing and materials
of exclusive Italian origin
WE SUPPORT THE ITALIAN SOCIETIES

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
111354/1
Date Received: 03-12-09
Date of test: 10-12-09
Date of issue: 15-12-09
Sample Name:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Divan-Bed Seat Composite – Mod. PIPPO
Description of the tested materials as declared by the customer
Inner Covering
Fabric.
The tested side is on view
Padding:
- Wadding coupled;
- Development Polyurethane.
Smoulding Cigarette EN 1021-1:2006
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Pre-treatment
The covering was undergone to the softening process in water and to the drying (Appendix A) before being conditioned for at least 24 hours at the
temperature 23 ± 5 %.
Tests Results
No ignition
Criterion of ignition Cigarette
1 2 Remarks
Smouldering criteria
Unsafe escalating combustion [3.1 a)] No No -
Test assembly consumed [3.1 b)] No No -
Smoulders to the extremities [3.1 c)] No No -
Smoulders through thickness [3.1 c)] No No -
Smoulders more than 1 hour [3.1 d)] No No -
In the final examination presence
of active smouldering [3.1 e)] No No -
Flaming criteria
Occurrence of flames [3.2] No No -
Yes: Ignition No: Non Ignition
The above test results relate only to the ignitability of the combination of the materials under the particular conditions of test; they are not intended as
a means of assessing the full hazard of the materials in use.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
111356/1
Date Received: 03-12-09
Date of test: 10-12-09
Date of issue: 15-12-09
Sample Name:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Divan-Bed Mattress Composite – Mod. PIPPO
Description of the tested materials as declared by the customer
Product: Spring Mattress
Covering:
Cotton weft fabric.
Padding:
- Wadding coupled;
- Development Polyurethane.
Tests Results
No ignition
Smoulding Cigarette EN 597-1:1994
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Criterion of ignition Test nr. Cigarettes Position
1 2
Smouldering criteria
Unsafe escalating combustion [3.1 a)] No No In correspondence of
Full consumption of the test sample [3.1 b)] No No the border,
Smoulders through thickness [3.1 c)] No No of the quilting
Smoulders more than 1 hour [3.1 d)] No No of the flat surface and
Carbonization on distance > 50 mm from the source [3.1 e)] No No on the flat surface
Flaming criteria
Occurrence of flames [3.2] No No as above
Yes: Ignition No: Non Ignition
The above test results relate only to the ignitability of the combination of the materials under the particular conditions of test; they are not intended as
a means of assessing the full hazard of the mattress, mattress pad or upholstered bed base in use.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1

CATAS
Research and
Development Centre and
Field Test Laboratory for
Wood and Furniture
TEST REPORT
111355/1
Date Received: 03-12-09
Date of test: 10-12-09
Date of issue: 15-12-09
Sample Name:
CATAS S.p.A.
F.C. – VAT: IT01818850305
Bus. Reg.: UD20663
R.E.A. UD198012
Stock Capital: €842,850 f.p.
Main Office
Via Antica, 24/3
33048 S. Giovanni al Natisone UD
Tel. 0432.747211
Fax 0432.747250
http://www.catas.com
e-mail: lab@catas.com
Divan-Bed Back Composite – Mod. PIPPO
Description of the tested materials as declared by the customer
External Covering
Fabric.
The tested side is on view
Padding:
- Wadding coupled;
- Development Polyurethane.
Smoulding Cigarette EN 1021-1:2006
Branch
Via Braille, 5
20035 Lissone MI
Tel. 039.464567
Fax 039.464565
e-mail: lissone@catas.com
[logo]
EMMEI S.R.L.
C. DA CAPITOLO ZONA P.I.P.
72021 FRANCAVILLA F.NA (BR)
ITALY
Pre-treatment
The covering was undergone to the softening process in water and to the drying (Appendix D) before being conditioned for at least 24 hours at the
temperature 23 ± 2 % and at relative humidity of 50 ± 5%
Tests Results
No ignition
Criterion of ignition Cigarette
1 2 Remarks
Smouldering criteria
Unsafe escalating combustion [3.1 a)] No No -
Test assembly consumed [3.1 b)] No No -
Smoulders to the extremities [3.1 c)] No No -
Smoulders through thickness [3.1 c)] No No -
Smoulders more than 1 hour [3.1 d)] No No -
In the final examination presence
of active smouldering [3.1 e)] No No -
Flaming criteria
Occurrence of flames [3.2] No No -
Yes: Ignition No: Non Ignition
The above test results relate only to the ignitability of the combination of the materials under the particular conditions of test; they are not intended as
a means of assessing the full hazard of the materials in use.
Head of Department Chief-Executive
Ing. Franco Prete Dott. Andrea Giavon
Sample name is declared by the company who asked for the test. This report relates to the samples submitted for the test and no others. Additions,
deletions or alterations are not permitted. This test report must always be reproduced in its entirely.
Pag. 1/1