EUREKA Series - Scame Parre S.p.A.

More documents

Recommendations

Info

Industrial Plugs and Sockets2.2ELECTRICAL AND MECHANICAL CHARACTERISTICSInsulating voltage:690V, 50-60Hz- minimum insulating clearance between surfaces: 10 mm- minimum clearance in air: 8 mm(for rated voltages exceeding 500 V)Operating voltage:up to 690V, 50-60HzBreaking capacity:1.25 times the rated current(test carried out at a voltage 1.1 times the ratedoperating voltage)Electrical and mechanical endurance- designed to withstand the following operations atrated voltage and current (electrical endurance) orloadless (mechanical endurance)Rated current ANo. of cyclesI Series II Series under load without load16A 20A 5.000 -32A 30A 1.000 1.000MATERIALS- Casing and insert made of engineering plastic withhigh thermal stability and mechanical strength.- Self-extinguishing to IEC 60695-2-1: casing 650 °C(glow-wire) and insert 850 °C (glow-wire).- Seal made of non-ageing EPDM elastomer or rubber.- Pins of nickel-plated brass for a perfect, lastingelectric contact.- Nickel-plated brass contact tubes with flexible springfor a constant and even contact pressure.- Nickel-plated steel terminal screws.- Contact tube springs and external screws of zincplatedsteel.- Grip and lid spring of stainless steel.- Resistance to rusting: 10 min in 10% aqueoussolution of ammonium chloride.CABLING OPERATIONSCabling capacity of the terminals:Cross-section of connectable conductors (mm 2 )RatedVoltageOver50V50Vor lessRatedcurrentPlugs, connectorsSocket outletsand appliance inletsmin max min max16A 20A 1/16 2,5/12 1,5/16 4/1232A 30A 2,5/14 6/10 2,5/14 10/863A 60A 6/10 16/6 6/10 25/4125A 100A 16/6 50/2 25/4 70/016A - 4 10 4 1032A - 4 10 4 10The terminals for pilot contacts provide connection forconductors with the same nominal cross-section as the internalterminals of 16 A plugs and connectors with rated operatingvoltage over 50 V.IEC309 AND EUREKA SERIESFAST AND EASY CABLINGSCAME’s plugs and sockets have a very special design.Their terminals are easy to get to and are already openand aligned, the cable clamp swivels and has its screwalready unscrewed, the casings are semi-screwed andthe cable glands are not completely closed. All this tohelp you save time when cabling.Plugs andsocketsAdaptorsDomesticcablereelsLampholdersTV & PhonePlates anddevices63A 60A 1.000 1.000125A 100A 250 250Impact resistance:to IEC 60309-1 section 24Galvanic anti-rusting treatment according to:UNI 3666-65General standards relating totesting corrosion of metallic materialsMax. cable size accepted by the cable clamp:EnclosuresPlugs andsocketsProtection degree:Operating temperature:IP44, IP67-25°C +80°CCertifications: most of the EUREKA Series and IEC309Series plugs and sockets are certified by IstitutoItaliano del Marchio di Qualità IMQ i and many are alsocertified by VDE, SEMKO, FI, NEMKO as shown in theindex by product number at the back of the catalogueUNI 5687-73Corrosion of metallic materialsEndurance testsCorrosion in salty mistProtection degree: when installing make sure that theseparate components, especially seals, cables and cable glands,have been fitted correctly. Any draining knock-out holes insocket outlets with IP44 should be opened and positioned inthe lower part of the casing.The protection degree of thesockets is assured either when the matching plugs are insertedor when the lids are closed; that of the plugs is assured whenthey are inserted in the matching sockets.RatedOutside ø mmcurrent min max16A 20A 8 1532A 30A 11,5 2163A 60A 7 31125A 100A 26 48When cabling, make sure that the conductors are connectedcorrectly.The pilot contact (if required) is identified by thewording “pilot”.Each terminal is identified by its symbols L1, L2,L3, N, earth; for single-phase options, L/+ and earth areindicated.Viewed from the front, the plug pins are in reverseorder to the connector tubes.InterlockedsocketsSwitchgearLight fittingsThreaded cable entryDistributionassembliesSeal(%) 10090AdaptorsStraight boxStandard SCAME flangeFixingscrews80706050403020The advantages of the EUREKASeries. The technical solutionsoffered by the Eureka series cutdown on cabling time, whichmeans a saving in labour costs.The chart shows the amount oftime saved with the EUREKA Seriescompared to the IEC309 Series.Industrialcable reelsAccessoriesWire connectors1002P+T 2P+E 3P+E 3P+T 3P+N+T 3P+N+EConduitsIEC309 SeriesEUREKA SeriesTrunkingSurface mounting socketoutlets - straight boxCabling time in relative terms,Taking the IEC309 Series 3P+N+E plug or connector cabling time as equal to 100%.Index170171
LIBERA Series2.2LIBERA SERIESCONNECTORS FOR ELECTRIC VEHICLESGENERALElectric vehicles mean end of air pollution andimprovement of quality of life.Tomorrow's vehicles - electrically powered cars,motorcycles, bicycles with aided pedal stroke - arebecoming an increasing reality, also thanks toScame, a company that always believed thatdreams could become true.Facing this challenge, Scame designed newconnectors for vehicles and supply stations,enabling supply from specific columns or from thehome garage.The outcome is the LIBERA Series of adapters,plugs, movable and flush sockets, complying withthe evolution of the standards promoted by CIVES -the Italian Commission for Electric Road Vehicles -,which are becoming actual reference standards.Reference standardItalian Standard IEC ENV 50275-1IEC 69-2endorsing European Standard ENV 50275-1Conductive recharge of electric vehiclesPart 1 : GeneralNovember 1999Italian Standard IEC ENV 50275-2-1IEC 69-3endorsing European Standard ENV 50275-2-1Conductive recharge of electric vehiclesPart 2-1 : Connection of electric vehiclesNovember 1999Italian Standard IEC ENV 50275-22IEC 69-4endorsing European Standard ENV 50275-2-2Conductive recharge of electric vehiclesPart 2-2 : a.c Recharge stationsNovember 1999Italian Standard IEC ENV 50275-2-3IEC 69-5endorsing European Standard ENV 50275-2-3Conductive recharge of electric vehiclesPart 2-3 : d.c. Recharge stationsNovember 1999CIVES - Italian Commission for electric road vehiclesItaslian section of AVEREEuropean Electric Road Vehicles Associationpromoted by EEC.http://www.ceiuni.it/CIVES/home.htmRECHARGE OF ELECTRIC ROAD VEHICLESDuring the nineties, the development of electricvehicles remained at experimental level; however,the increasing environmental pollution and thefunds provided both by the European Union andthe various Governments aimed at reducingharmful emissions in the environment, willincreasingly spread the use of this means oftransportation.The introduction of electric vehicles involves theavailability of places and sources of power supply,where the vehicle can be connected to the powerdistribution plant. Depending upon the placewhere recharge columns will be installed, be theyprivate places with access allowed only toauthorized staff, or public places where access isallowed to everybody, the supply of electric powercould be or not subject to payment. This could bemade for instance by charging the amount of thepower withdrawn to the credit card, as it happenswith normal vehicles at fuel stations.According to draft European Standard ENV 50275,there are four different method to rechargeelectric vehicles, depending upon the type ofconnection chosen:Recharge method no. 1:Connection of the electric vehicle to the a.c. mains- mains side - by means of single-or three-phasestandard plugs and using the phase/s, the neutraland the protection conductor. Standard plugs,mains side, are those complying with therequirements of national and internationalstandards.Recharge method no. 2:Connection of the electric vehicle to the a.c. mains- mains side - by means of single-or three-phasestandard plugs using the phase/s, the neutral andthe protection conductor. with the addition ofcontrol functions between the electric vehicle andthe plug or the control box as specified at item 6.4.The control box shall be mounted on the cable at adistance of no more than 0.3 mt from the plug orfrom the EAVE.Recharge method no. 3:Direct connection of the electric vehicle to the a.c.mains by means of dedicated supply equipment,where the control functions specified at item 6.4are extended to the portion of equipmentpermanently connected to the a.c. mains.Recharge method no. 4:Indirect connection of the electric vehicle to thea.c. mains by means of an outboard batterycharger, where the control functions specified atitem 6.4 are extended to the portion of equipmentpermanently connected to the a.c. mains.The above mentioned standard indicates specificrequirements, which may be either compulsory oroptional, for each of the above recharge method.Italian manufacturers of electric vehicles decided notto use recharge method no. 1, because it does notprovide any control on the soundness of theprotection circuit before supplying power to thevehicles, which might result into safety problems forthe user. In view of this concern, the IEC hasrequested a special condition of use; as aconsequence, ENV 50275 specifies that rechargemethod no. 1 should not be used in Italy.Plugs andsocketsAdaptorsDomesticcablereelsLampholdersTV & PhonePlates anddevicesEnclosuresPlugs andsocketsInterlockedsocketsSwitchgearLight fittingsDistributionassembliesAdapter for domestic use. Socket. Plug.Flush sockets.AdaptorsIndustrialcable reelsAccessoriesWire connectorsConduitsTrunkingIndex172173
Page 3 and 4: Industrial Plugs and Sockets2.2MAIN
Page 5: Industrial Plugs and Sockets2.2SYNO
Page 9 and 10: LIBERA Series2.2IP44 Connectors for
Page 11 and 12: EUREKA Series2.2LIDTERMINALSCABLE C
Page 13 and 14: EUREKA Series2.2PLUGSRated operatin
Page 15 and 16: EUREKA Series2.2PANEL MOUNTING SOCK
Page 17 and 18: EUREKA Series2.2PLUGSAPPLIANCE INLE
Page 19 and 20: EUREKA-HD Series2.2EUREKA-HD SERIES
Page 21 and 22: EUREKA-HD Series2.2WATERTIGHTWatert
Page 23 and 24: EUREKA-HD Series2.260 AmpWatertight
Page 25 and 26: EUREKA-HD Series2.2SERIES IP67 DIME
Page 27 and 28: IEC309 Series2.2IEC309 SERIESINDUST
Page 29 and 30: IEC309 Series2.2PLUGS AND SOCKETS -
Page 31 and 32: IEC309 Series2.2APPLIANCE INLETSRat
Page 33 and 34: IEC309 Series2.2MOBILE PLUGSMOBILE
Page 35 and 36: Accessories2.2ACCESSORIES FOR THE I

EUREKA Series - Scame Parre S.p.A.

Create successful ePaper yourself

Delete template?

Save as template?