SCUBAPRO Balanced Power Inflator - Pmp6.fr

SCUBAPRO Balanced Power Inflator7/32”Carefully loosen the 7/32” nut from theexhaust mechanism. The exhaust seatwill be inspected and re-used except ifit is worn.CAUTION: Hold pressure on theexhaust button while loosening toprevent the assembly from loss due tospring tension.Carefully loosen the inflator seat usinga small standard screwdriver (5mmblade).CAUTION: Hold pressure on theinflator button while loosening toprevent the assembly from loss due tospring tension.Disassemble the quick disconnect hosefitting from the low-pressure hose usingthe Universal Tool and adjustablewrench.©2003 SCUBAPRO4Important note: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPROtechnicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO techniciansmust be employed by an authorized SCUBAPRO facility.