obstruction lighting (led, incandescent)

Obstruction Lights—LED ATEX CertifiedL810 HazardousLocation Atex CertifiedLED OBSTRUCTION LIGHTSuitable for Use in Hazardous AreasCertified to: II 3GEx nA IIC T4Compliant to: ICAO (Annex 14)Low IntensityType A or Type BFeatures/Benefits■■ Inherent safety capability; low electrical/thermalenergy and high light output■■ Unique optically designed lens to enhance LEDoperation and provide 360° visibility■■ Weather/corrosion resistant lamp assemblyand housing■■ Self-contained wiring compartment eliminatesadditional boxes■■ Can be operated steady or flashed (controllernot supplied)■■ Available as a single or dual unit■■ Resistant to shock and vibration■■ Threaded 1" and 3/4" bottom hub for mounting■■NEMA 4X rated and IP66■■ LED technology for extended life andenergy efficiency■■ Available in 120VAC and 240VAC■■ T4 ratedApplication■■ The Cooper Crouse-Hinds Visual Signal Lightis an LED based ATEX certified fixture. Usedfor visual indication in hazardous environments,providing a valuable solution to the petrochemicalindustry facilities.Ordering Information ATEX CERTIFIED PRODUCTVoltage Single Fixture Dual Fixture Color120VAC240VACOALSR/120-ATEXVALSR/240-ATEXOperating Conditions■■ Temperatures ranging from -67°F to +131°F (-55°C to +55°C). Willwithstand wind in excess of 150 mph (240 kph), salt fog.FinishOALDR/120-ATEXVALDR/240-ATEXCatalog Numbering SYSTEMO Obstruction or V Visual SignalA ATEX CertifiedL Light Emitting Diode (LED)S Single D Dual■■ Cast aluminum housing and stainless steel hardware.■■ Electrostatically applied powdercoat of aviation orange paint.RedRedR Red120, 240 Voltage AC-ATEX24