obstruction lighting (led, incandescent)

ObstructionLighting19

Obstruction Lights—LED General UseL810 GeNEral USELED OBSTRUCTION LIGHTCertified to:FAA AC NO: 150/5345-43FCompliant to: Canadian Aviation RegulationCAR 621.9 (Transport Canada)ICAO (Annex 14)Low intensity Type A (10cd)Low intensity Type B (32cd)V ERIFIE DFeatures/Benefits■■ Available as a single or dual unit■■ Available in 12VDC, 24VDC, 48VDC, 120VAC, and240VAC versions (50 or 60Hz)■■ Earth grounding provisions provided■■ Unique optically designed lens to enhance LEDoperation and provide 360° visibility■■ State-of-the-art high-flux LED technology■■ Weather/corrosion resistant lamp assemblyand housing■■ Self-contained wiring compartment eliminatesadditional boxes■■ Threaded 1" and 3/4" bottom hub for mounting■■ Can be operated steady or flashed(controller not supplied)■■ Resistant to shock and vibration■■ NEMA 4X rated and IP66Ordering Information †Voltage Single Fixture Dual Fixture120VAC240VAC12VDC48VDC24VDCO ObstructionOWLFSR/120OWLFSR/240 ‡OWLFSR/12OWLFSR/48OWLFSR/24Catalog Numbering SYSTEMW Non Hazardous LocationL Light Emitting Diode (LED)F FAA Type L810OWLFDR/120OWLFDR/240 ‡OWLFDR/12OWLFDR/48OWLFDR/24S Single or D DualR Red120, 240 Voltage AC12, 24, 48 Voltage DC† Standard product meets both 32cd and 10cd requirements‡ 240VAC lights are also available in 50cd and 10cd only. For 50cd only, remove “F”from catalog number and add “ICAO50CD” to end. For 10cd only remove “F” fromcatalog number and add “ICAO10CD to end. Ex. OWLSR/240 ICAO50CDApplication■■ The Cooper Crouse-Hinds LED Obstructionlight is a type FAA L810 red obstruction light.Designed for steady burning, this fixture is usedto mark any obstacle that may present hazardsto aircraft navigation.Specifications■■ Operating Temperature: -67°F to +131°F(-55°C to +55°C)■■ Cast aluminum housing■■ Stainless steel hardwareFinish20

Obstruction Lights—LED General UsePHOTOMETRIC DATAMECHANICAL DIMENSIONSL810 Isotropic Intensity Chart20151050-5-10Vertical Angle(deg)60.0-80.040.0-60.020.0-40.00.0-20.0(11.14")283.1mmREF(5.79") 147mmREFLens AssemblyWireHousing(9.75") 247.7mmREF(14.14")359.2mmREF-150 45 90 135 180 225 270 315Horizontal Angle (deg)(15.54") 394.6mmREFWeights & MeasurementsPart Number Approx. Shipping Weight Container DimensionsSingle UnitDual Unit7.1 lbs16.1 lbs16" x 9" x 8"22" x 17" x 9"PFElectrical SpecificationsOPERATING VOLTAGE WATTS (W)VAMin Typ Max Min Typ MaxAMPS120VAC UNITS240VAC UNITS (60Hz)240VAC UNITS (50Hz)12VDC UNITS (STANDARD)24VDC UNITS48VDC UNITS.3.17––––46.572––––921981981021431202402401224481322642641427531011122017111515142522141818172929160.1200.120–2.0000.9200.27521

Obstruction Lights—LED Class I, Division 2L810 Class I, division 2LED OBSTRUCTION LIGHTSuitable for Use in Hazardous AreasETL Listed in compliance with UL1598 and UL844for use in Class I, Div 2 Hazardous LocationsCertified to: FAA AC NO: 150/5345-43FCompliant to: ICAO (Annex 14)Type A or Type BCanadian Aviation RegulationCAR 621.9 (Transport Canada)V ERIFIE DFeatures/Benefits■■ Available as a single or dual unit■■ Suitable for all Class I, Div 2, Groups A, B, C, Dhazardous environments, T4 rated■■ Unique optically designed lens to enhance LEDoperation and provide 360° visibility■■ Up to 100,000 hours of service life■■ Weather/corrosion resistant lamp assemblyand housing■■ Self-contained wiring compartment eliminatesadditional boxes■■ Threaded 1" and 3/4" bottom hub for mounting■■ Can be operated steady or flashed(controller not supplied)■■ Resistant to shock and vibration■■ NEMA 4X rated and IP66■■ Available in 120VAC and 240VAC (50 or 60Hz)■■ Energy efficient LED technologyOrdering InformationVoltage Single Fixture Dual Fixture Color120VAC240VACO ObstructionOX2LFSR/120OX2LFSR/240FinishOX2LFDR/120OX2LFDR/240Catalog Numbering SYSTEMX2 Hazardous LocationClass I, Div 2L Light EmittingDiode (LED)F FAA Type L810S Single or D DualR Red120, 240 Voltage AC12, 24, 48 Voltage DC■■ Cast aluminum housing and stainless steel hardware.■■ Electrostatically applied powdercoat of aviation orange paint.RedRedApplication■■ The Cooper Crouse-Hinds Obstruction Light isan LED based Class I, Division 2 certified fixture.Used to mark obstructions on structures inhazardous environments, these fixtures providea valuable solution to facilities in demanding anddangerous environments.Operating Conditions■■ The fixture is designed for severe duty conditions andhazardous environments.■■ Temperatures ranging from -67°F to +131°F (-55°C to+55°C). Will withstand wind in excess of 150 mph(240 kph), salt fog.22

Obstruction Lights—LED Class I, Division 2PHOTOMETRIC DATAMECHANICAL DIMENSIONSL810 Isotropic Intensity Chart20151050Vertical Angle(deg)60.0-80.040.0-60.020.0-40.00.0-20.0Shield11.21[284.6]REF11.77[298.9]REFLens Assembly14.77[375.2]ShieldLensAssembly14.21[360.8]-5-10BI-DIRECTIONALWIRE HOUSINGDual WireHousing-150 45 90 135 180 225 270 3155.79 [147]REF15.54 [394.7]Horizontal Angle (deg)Dimensions are in inches (mm)Weights & MeasurementsPart Number Approx. Shipping Weight Container DimensionsSingle UnitDual Unit7.1 lbs16.1 lbs16" x 9" x 8"22" x 17" x 9"PFElectrical SpecificationsOPERATING VOLTAGEWATTS (W)VAMin Typ Max Min Typ Max120VAC UNITS240VAC UNITS (60Hz)240VAC UNITS (50Hz)0.30.20.26572739219819812024024013226426410111215151318181723

Obstruction Lights—LED ATEX CertifiedL810 HazardousLocation Atex CertifiedLED OBSTRUCTION LIGHTSuitable for Use in Hazardous AreasCertified to: II 3GEx nA IIC T4Compliant to: ICAO (Annex 14)Low IntensityType A or Type BFeatures/Benefits■■ Inherent safety capability; low electrical/thermalenergy and high light output■■ Unique optically designed lens to enhance LEDoperation and provide 360° visibility■■ Weather/corrosion resistant lamp assemblyand housing■■ Self-contained wiring compartment eliminatesadditional boxes■■ Can be operated steady or flashed (controllernot supplied)■■ Available as a single or dual unit■■ Resistant to shock and vibration■■ Threaded 1" and 3/4" bottom hub for mounting■■NEMA 4X rated and IP66■■ LED technology for extended life andenergy efficiency■■ Available in 120VAC and 240VAC■■ T4 ratedApplication■■ The Cooper Crouse-Hinds Visual Signal Lightis an LED based ATEX certified fixture. Usedfor visual indication in hazardous environments,providing a valuable solution to the petrochemicalindustry facilities.Ordering Information ATEX CERTIFIED PRODUCTVoltage Single Fixture Dual Fixture Color120VAC240VACOALSR/120-ATEXVALSR/240-ATEXOperating Conditions■■ Temperatures ranging from -67°F to +131°F (-55°C to +55°C). Willwithstand wind in excess of 150 mph (240 kph), salt fog.FinishOALDR/120-ATEXVALDR/240-ATEXCatalog Numbering SYSTEMO Obstruction or V Visual SignalA ATEX CertifiedL Light Emitting Diode (LED)S Single D Dual■■ Cast aluminum housing and stainless steel hardware.■■ Electrostatically applied powdercoat of aviation orange paint.RedRedR Red120, 240 Voltage AC-ATEX24

Obstruction Lights—LED ATEX CertifiedPHOTOMETRIC DATAMECHANICAL DIMENSIONSL810 Isotropic Intensity Chart20151050Vertical Angle(deg)60.0-80.040.0-60.020.0-40.00.0-20.0Shield11.21[284.6]REFLensAssembly11.77[298.9]REF14.77[375.2]ShieldLensAssembly14.21[360.8]-150 45 90 135 180 225 270 315Horizontal Angle (deg)-5-105.79 [147]REFBI-DIRECTIONALWIRE HOUSING15.54[394.7]Dual WireHousingDimensions are in inches (mm)Weights & MeasurementsPart Number Approx. Shipping Weight Container DimensionsSingle UnitDual Unit7.1 lbs16.1 lbs16" x 9" x 8"22" x 17" x 9"PFElectrical SpecificationsOPERATING VOLTAGEWATTS (W)VAMin Typ Max Min Typ Max120VAC UNITS240VAC UNITS (60Hz)240VAC UNITS (50Hz)0.30.20.26572739219819812024024013226426410111215151318181725

Obstruction Lights—Incandescent General UseL810 GENERAL USEInCanDESCENTOBSTRUCTION LIGHTCertified to:FAA AC 150/5345-43FCompliant to: FCC Rules and RegulationsCanadian Standards Association (CSA)ICAO (Annex 14)Low Intensity Type A or Type BCanadian Aviation RegulationCAR 621.9 (Transport Canada)REOL SERIESFeatures/BenefitsOrdering Information*■■ ETL Certified to FAA (EOL with 116W,120V Lamp(s) only)■■ Red fresnel glass globes for 360° visibility■■ Operates on 120 or 220-240V and 60 or 50Hzfrequency power supply when used withproper voltage lamp■■ Threaded 1" hub for mounting■■ Pre-wired leads■■ Cast aluminum housing with yellow finish■■ Globes with tether & clamp band■■ Accepts traffic signal lamps with USA medium screwbase and European E27 base■■ O-Ring globe seal■■ Lamp life 8000 hours at 120V and 4000 hours for220-240V applicationsApplicationV ERIFIE D■■ The EOL Series incandescent obstruction light is usedfor nighttime obstruction marking of tall structuresthat may present hazards to air navigation. The EOL isdesigned for steady burning applications.Fixture Type:40940 = Single, Bottom Entry50033 = Single, Side Entry50021 = Double, Bottom EntryLamp Type:No symbols mean lamp(s) not included116 = 116W 120V 10047-1577100 = 116W 230V 10047-2145Options:GR = Ground Wire(s)*Other colored globes are available for non-obstructionlighting applications (contact factory).MECHANICAL DIMENSIONSShippingWeight:Weights & Measurements50033 50021 409404.0 lbs1.8 kg10.0 lbs4.5 kg3.0 lbs1.4 kg500335.1(130)50021 4094015.5(394)5.1(130)ShippingVolume:0.4 cu ft0.011 cu m0.45 cu ft0.013 cu m0.4 cu ft0.011 cu m9.9(252) 11.0(280)8.8(224)Dimensions are in inches (mm)26

Obstruction Lights—Incandescent General UseL810 GENERAL USEIncandescentObstruction LightCompliant to: US Military Specification MIL-L-7830USAF ANA StandardsFCC Rules and RegulationsCanadian Standards Association (CSA)ICAO (Annex 14)Low Intensity Type A or Type BCanadian Aviation RegulationCAR 621.9 (Transport Canada)RVAW SERIESFeatures/BenefitsOrdering Information*■■ Compliant to US Military Specification MIL-L-7830 aswell as USAF ANA Standards■■ Red fresnel glass globes for 360° visibility■■ Threaded bottom 1" hub for mounting■■ Cast aluminum housing with natural finish■■ Threaded globes■■ Accepts traffic signal lamps with USA medium screwbase and European E27 base■■ Operates on 120 or 220-240V and 60 or 50Hzfrequency power supply when used with propervoltage lamp■■ Gasket for globe seal■■ Lamp Life 8000 hours at 120V and 4000 hours for220-240V applications■■ Optional wire guards (-GG option)Application■■ The VAW Series incandescent obstruction light is usedfor nighttime obstruction marking of tall structures thatmay present hazards to air navigation. The VAW isdesigned for steady burning applications.Weights & Measurements43961 43958Fixture Type:43958 = Single43961 = Double43950A = Double**Lamp Type:No Symbols Mean Lamp(s) Not Included116 = 116W 120V 10047-1577100 = 116W 230V 10047-2145Options:GG = Wire Globe Guard(s): Factory Installed OnlyGR = Ground Wire(s)* Other colored globes are available for non-obstructionlighting applications, (contact factory).** Includes brackets for lowering device.Cooper Crouse-Hinds also offers the complete ObstructionLight Lowering System (contact factory).MECHANICAL DIMENSIONS43961 4395815.00(381)5.75(146)ShippingWeight:ShippingVolume:16.0 lbs1.4 kg1.4 cu ft0.04 cu m8.0 lbs0.7 kg0.7 cu ft0.02 cu m14.13(359)13.38(340)Dimensions are in inches (mm)Application Note:FAA Advisory Circular 70/7460-1K ‘‘Obstruction Marking and Lighting,’’Chapter 12, paragraph 123.a advises that steady burning red lights shouldconform to FAA AC 150/5345-43 or Military Specification MIL-L-7830.27