OWNER'S MANUAL - Cary Audio Design

CONTROLS AND DISPLAYS12. DIGITAL OUTPUT JACK (COAXIAL)• 44.1 kHz - 192 kHz digital data output from this jack.• With Super Audio CD disks, no digital signals output.13. DIGITAL OUTPUT JACK (AES/EBU)• 44.1 kHz-192 kHz digital data output from this jack.• With Super Audio CD disks, no digital signals output.*The pin assignments of ALL of the XLR-type male analog outputs, the XLR-type maledigital output and XLR-type female digital inputs are:Pin 1: Signal groundPin 2: Signal + (non-inverting)Pin 3: Signal - (inverting)Connector ground lug: chassis groundRefer to your amplifier's operating manual to verify that the XLR pin assignments of itsinput connectors correspond to the CD 306 SACD. If they are different, wire the XLRcable so that the appropriate XLR output pin connects to the equivalent XLR input pin.Pin 1: Signal groundPin 2: Signal + (non-inverting)Pin 3: Signal - (inverting)Connector ground lug: chassis groundRefer to your digital input source signal player or other digital source's operating manualto verify that the XLR pin assignments of its input connectors correspond to the CD 306SACD. If they are different, wire the XLR cable so that the appropriate input pin connectsto the equivalent input pin.Pin 1: Signal groundPin 2: Signal + (non-inverting)Pin 3: Signal - (inverting)Connector ground lug: chassis groundRefer to your digital source's operating manual to verify that the XLR pin assignments ofits input connectors correspond to the CD 306 SACD. If they are different, wire the XLRcable so that the appropriate output pin connects to the equivalent output pin.12