interface - FASGREL

wietap UL / CSASurge arrester, category AFor direct load protection in control cabinets or sub-distributionswietap R M 2P 30 FM• Surge arrester, type 3• Two-pole surge arrester• High discharge capacity due to powerfulzinc oxide varistor• Slim design (modular construction) acc. to DIN 43880• With pluggable protection modules• Function/failure indication according to VDE 0100-534• With remote signaling contact (FM)• Vibration and shock tested acc. to EN 60068-22112111443TypePart No.wietap R M 2P 30 FM 84.995.3206.0Technical DataSPD accord. to EN 61643-11 Type 3SPD accord. to IEC 61643-1Category A / Class IIIRated voltage (50/60 Hz) [V]24 VMaximum continuous voltage AC [UC] 30 VMaximum continuous voltage DC [UC] 30 VMax. continuous operating voltage [MCOV] 30 VVoltage protection rating [VPR]330 VRated current AC20 ARated discharge current (8/20) [In]1 kATotal discharge current (8/20) [L+N-PE] [Itotal] 2 kACombined surge [UOC]2 kVCombined surge [L+N-PE] [UOC total]4 kVProtection level [L-N] [UP]≤ 180 VProtection level [L/N-PE] [UP]≤ 630 VOperating time [L-N] [tA]≤ 25 nsOperating time [L/N-PE] [tA]≤ 100 nsMaximum network overcurrent protection 25 A gL/gG or B 25 AShort-circuit proof with network overcurrent 6 kA rmsprotection with 25 A gL/gGTemperature range [TU] 0 ... +85 °CFunction/failure indicationgreen / redWire range (min.) 0.5 mm² solid/fi ne-stranded / AWG 20Wire range (max.) 4 mm² solid/2,5 mm² fi ne-stranded / AWG 12/14Mounted on DIN rail acc. to EN 60715 35 mmHousing material thermoplastic, UL 94 V-0Degree of protection IP 20Dimensions 1 mod., DIN 43880Remote signaling contacts (FM)changeover contactSwitching capacity AC (FM)250 V/0.5 ASwitching capacity DC (FM)250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 AWire range for remote signaling terminals max. 1.5 mm 2 solid/fine-stranded / max. AWG 14ApprovalsAKwwietap R M 2P 150 FM• Surge arrester, type 3• Two-pole surge arrester• High discharge capacity due to powerfulzinc oxide varistor• Slim design (modular construction) acc. to DIN 43880• With pluggable protection modules• Function/failure indication according to VDE 0100-534• With remote signaling contact (FM)• Vibration and shock tested acc. to EN 60068-22112111443TypePart No.wietap R M 2P 150 FM 84.995.3209.0Technical DataSPD accord. to EN 61643-11 Type 3SPD accord. to IEC 61643-1Category A / Class IIIRated voltage (50/60 Hz)120 VMaximum continuous voltage AC [UC] 150 VMaximum continuous voltage DC [UC] 150 VMax. continuous operating voltage [MCOV] 150 VVoltage protection rating [VPR]700 VRated current AC20 ARated discharge current (8/20) [In]2 kATotal discharge current (8/20) [L+N-PE] [Itotal] 4 kACombined surge [UOC]4 kVCombined surge [L+N-PE] [UOC total]8 kVProtection level [L-N] [UP]≤ 640 VProtection level [L/N-PE] [UP]≤ 800 VOperating time [L-N] [tA]≤ 25 nsOperating time [L/N-PE] [tA]≤ 100 nsMaximum network overcurrent protection 25 A gL/gG or B 25 AShort-circuit proof with network overcurrent 6 kA rmsprotection with 25 A gL/gGTemperature range [TU] 0 ... +85 °CFunction/failure indicationgreen / redWire range (min.) 0.5 mm² solid/fi ne-stranded / AWG 20Wire range (max.) 4 mm² solid/2,5 mm² fi ne-stranded / AWG 12/14Mounted on DIN rail acc. to EN 60715 35 mmHousing material thermoplastic, UL 94 V-0Degree of protection IP 20Dimensions 1 mod., DIN 43880Remote signaling contacts (FM)changeover contactSwitching capacity AC (FM)250 V/0.5 ASwitching capacity DC (FM)250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 AWire range for remote signaling terminals max. 1.5 mm 2 solid/fine-stranded / max. AWG 14ApprovalsAKw30