Sicherheitsdatenblatt N001 (CZ

Section 1 Exposure Scenario TitleTitle:Formulation and (re)packing of substances and mixturesUse DescriptorSector(s) of UseSU10Process CategoriesPROC1, PROC15, PROC2, PROC3, PROC8a,PROC8bEnvironmental Release CategoriesERC2Specific Environmental Release CategoryESVOC 2.2.v1Processes, tasks, activities coveredFormulation, packing and re-packing of the substance and its mixtures in batch or continuous operations,including storage, materials transfers, mixing, tabletting, compression, pelletisation, extrusion, large andsmall scale packing, sampling, maintenanance and associated laboratory activities.Section 2 Operational conditions and risk management measuresSection 2.1 Control of worker exposureProduct CharacteristicLiquidDuration, frequency and amountCovers daily exposures up to 8 hours (unless stated differently)[G2]Covers percentage substance in the product up to 100 %[G13 ]Other given operational conditions affecting workers exposureAssumes a good basic standard of occupational hygiene is implemented [G1]Assumes use at not more than 20°C above ambient tem perature[G15]Contributing Scenarios/Specific Risk Management Measures and Operating Conditions(only required controls to demonstrate safe use listed)General measures (skin irritants) PROC1Avoid direct skin contact with product. Identify potential areas for indirect skin contact. Wear gloves (testedto EN374) if hand contact with substance likely. Clean up contamination/spills as soon as they occur. washoff any skin contamination immediately. provide basic employee training to prevent / minimise exposuresand to report any skin problems that may develop.General measures (carcinogens) PROC1Consider technical advances and process upgrades (including automation) for the elimination of releases.minimise exposure using measures such as closed systems, dedicated facilities and suitable general/localexhaust ventilation. Drain down systems and clear transfer lines prior to breaking containment. Clean/flushequipment, where possible, prior to maintenance Where there is potential for exposure: restrict access toauthorised persons; provide specific activity training to operators to minimise exposures; wear suitablegloves and coveralls to prevent skin contamination; wear respiratory protection when its use is identified forcertain contributing scenario; clear up spills immediately and dispose of wastes safely. Ensure safe systemsof work or equivalent arrangements are in place to manage risks. Regularly inspect, test and maintain allcontrol measures. Consider the need for risk based health surveillance.General exposures (closed systems) PROC1Handle substance within a closed system.General exposures (closed systems) PROC2Wear suitable gloves tested to EN374.Handle substance within a closed system.Sample via a closed loop or other system to avoid exposure.General exposures (closed systems) PROC3Handle substance within a closed system.Process sampling PROC3Sample via a closed loop or other system to avoid exposure.Laboratory activities PROC15Handle in a fume cupboard or under extract ventilation.Bulk transfers PROC8bSeite 7 von 21