L 524 - L 542 Wheel Loaders

PerformanceThe Liebherr driveline allows the Liebherr diesel engine to be mounted lengthwaysin the rear, with the output shaft facing backwards. Compared to conventionallydriven wheel loaders, the operating weight is much lower, the tippingload is higher, and more material can be moved each operating hour.Higher performance, lower weightHigher productivityUltra modern Liebherr drivelineInnovative technologyFlexibility puts them aheadAn all-purpose loaderThe combination of the Liebherr driveline and theunique position of the Liebherr diesel engine allowshigher tipping loads at low operating weight. Thisleads to significantly higher productivity, becausethere is no need for unnecessary counterweight.The large Liebherr wheel loaders are equipped withthe 2plus2 gearbox. Tractive force and speed areautomatically adjusted to the requirements withoutthat the driver has to shift. There is no needfor a mechanical reverse gear, because the traveldirection is changed hydraulically.The “Holzknecht” is the ideal tool to complementthe available equipment for the large Liebherrwheel loaders. Especially when operating withheavy equipment and loads, this “torque increase”is the perfect additional system for your requirements.Their compact design allows these wheelloaders to maneuver quickly and efficiently – anideal basis for high handling capacity.Conventional travel gear• Longitudinally mounted diesel engine movesthe centre of gravity to the further forward.• Much more additional counterweight isneeded to maintain stability and to increasethe tipping load.• This leads to high operating weight and badvisibility.An all-purpose loader• The choice between parallel (P) and Z-patternlinkage means that the loader can always beconfigured to suit the customer’s specific tasks:P for industrial use, Z for conventional materialhandling.L 524 2plus1 - L 542 2plus17