System summary

System 100V | System descriptionSystem SLIOPerformance and ApplicationThe system 100V is designed for centralized and decentralized automation tasksin the manufacturing and process industries for the lower performance range.System 100VProgrammingThe system 100V is programmed with WinPLC7 or with Siemens STEP7 in LAD,FBD and STL.MemoryThe CPUs in the system 100V have the work and load memory already integrated.Depending on the CPU version, users can choose from 8 kByte to 32kByte work memory. In addition, MMC cards for storing program and data aresupported.FunctionsFor the connection of sensors and actuators are a variety of signaling modulesin the system 100V, and system 200V for acquiring digital and analog signals inand out of the process is available. Most of the signal modules from the system200V are bus and functionally compatible to the system 100V.Depending on the CPU, variant counter inputs and PWM outputs are integrated.Due to the counter inputs, complex and fast counting tasks in the manufacturingand process industries will be economically realized. The adjustable PWMoutputs via potentiometer allow, for example, CCFLs to be "dimmed" or thespeed of appropriate electric motors and fans to be regulated via impulses.System 200VSystem 300SSystem 500SCommunicationFor the connection of serial devices, e.g. scanner or printer, and for theintegration of systems from other manufacturers, different CPU variants areavailable with integrated interfaces. The system 100V provides fi eldbus slavemodules for PROFIBUS-DP and CANopen, with which the system also servesas manufacturer-independent, central, but also as subordinate decentralizedfi eldbus slave unit.The fi eldbus slave modules are integrated via the device master fi les into existingfi eldbus infrastructure.HMISoftwareAppendixAccessories23