ProCell - Process Flow Cells - Specac

Specac | ProCell - Process Flow CellsIntegration of process flow cellsGetting light through the process sample.Light is transmitted via an optical fiber cable fromthe spectrophotometer source to one port of theprocess flow cell. Collimation optics then directthis light beam through a set pathlength ofprocess stream to a second set of optics whichre-focus the beam to a return optical fiber cableattached to the second process flow cell port.The return optical fiber cable serves to transmitthe light beam back to the spectrophotometerdetector. Process flow cells are typically installedas part of the process circuit either directly in theprocess stream or as a “by-pass loop”. Byadopting the process flow cell in a “by-pass loop”configuration, the user has the opportunity toisolate the process flow cell from the process cellfor routine cleaning, servicing, or calibration.ProcessFlow CellOptical fiberSpectrophotometerSourceDetectorProcessFlow(i) Direct installationValveProcessFlowProcessFlow CellOptical fiberSpectrophotometerSourceDetector(ii) “By-pass loop” installationwww.specac.com