ProCell - Process Flow Cells - Specac

More documents

Recommendations

Info

Specac | ProCell - Process Flow CellsProCell Vortex data sheetProCell Vortex:Enhanced Optional FeaturesCleaning PortsAn attractive feature of the Specac ProCell Vortexprocess cell is the optional “cleaning port”, wherea novel plug arrangement gives access to thewindow surfaces. This allows the internal cellwindows to be cleaned without removing the cellfrom the pipe work, in the event that foulingoccurs (either from long term use or following aprocess upset that caused material to bedeposited within the plant). To assist thisfunctionality, the cell would typically be installed ina ‘by-pass’ loop where valves can isolate it fromthe main process when servicing occurs.plug into the port. The latter has the effect ofstopping the leak and allowing the process topressurise the secondary seal. The user is thenaware that the cell is operating on the back-upseal and needs attention at the first convenientopportunity.Diffusion BondingVersions of the Specac ProCell Vortex processcell are available with diffusion bonded windows.These versions avoid the use of any polymermaterials and are capable of operation attemperatures up to 400°C or in chemicalenvironments that are incompatible with eventhe high performance perfluoroelastomer seals.‘Tell-tale’ PortsA further propriety optional feature is the ‘Tell-Tale’ ports. These are small passages within thecell body that link the space between the primaryand back-up window seals to an outside port.They can be used in critical or hazardousapplications in several ways: either as a visualindication of leakage from the primary seal, orwith the use of a secondary detection system inthe event of a particularly hazardous material. Ifleakage is observed the user has the option ofdealing with it immediately or fitting a blankingProCell Vortex: Application SupportSpecac endeavor to provide the most reliableand appropriate process cell solution for thecustomer’s application. We ensure that anapplication engineer is always close at handthroughout the product purchase andimplementation stages, so customers can havecomplete confidence in our quality of service.Specac has an active program of ongoinginnovation to ensure that our process cellsolutions are at the forefront of the market.Large bore ProCell Vortexwww.specac.com
Specac | ProCell - Process Flow CellsProCell Vortex data sheetStandard SpecificationOptical rangeSpecify UV/Vis or NIR operationPathlength1 - 10mmWindow materialSapphireBody materialStainless Steel 316, Hastelloy C276, and DuplexStainless Steel (others available on request)Temperature range0 - 280°C (up to 400°C with Gold diffusion bonding)Pressure rangeVacuum to 1500 psi.SealsKalrez 4079, Aluminium Diffusion Bonding, or GoldDiffusion Bonding (others available on request)Standard fiber diameter300 to 600µm (others available on request)Fiber fittingSMA 905Pipe fittingRange of ANSI (150 or 300lb) and DIN flanges (16bar)Thermocouple well1/8” BSPOptional FeaturesPrimary seal leak portsWindow cleaning portsProduct ComplianceVersions of the Specac ProCell Vortex can bedesigned and manufactured to meet a widerange of international pressure and hazardousarea standards. Please contact Specac todiscuss your requirements.ProCell VortexLiquid Phase Process Flow CellANSI coupling flange detailsBore Flange Mounting Fixings Dimension DimensionDesignation Diameter Diameter Hole PCD "UNC" “A” (mm) “B” (mm)“C” (mm) “D” (mm) “E” (mm) Minimum Minimum150 lb 1 /2" 12 89.0 60.3 4 x 1 /2" 120 170150 lb 3 /4" 12 98.4 69.8 4 x 1 /2" 120 180150 lb 1" 24 108.0 79.4 4 x 1 /2" 120 186150 lb 2" 49 152.4 120.6 4 x 5 /8" 120 237150 lb 3" 74 190.5 152.4 4 x 5 /8" 120 288150 lb 4" 97 228.6 190.5 8 x 5 /8" 120 314300 lb 1 /2" 12 95.2 66.7 4 x 1 /2" 100 174300 lb 3 /4" 12 117.5 82.5 4 x 1 /2" 100 181300 lb 1" 24 123.8 88.9 4 x 5 /8" 108 188300 lb 2" 49 165.1 127.0 8 x 5 /8" 108 214300 lb 3" 74 209.5 168.3 8 x 3 /4" 115 240300 lb 4" 97 254.0 200.0 8 x 3 /4" 115 266DIN coupling flange detailsBore Flange Mounting Fixings Dimension DimensionDesignation Diameter Diameter Hole PCD Metric “A” (mm) “B” (mm)“C” (mm) “D” (mm) “E” (mm) “Course” Minimum MinimumDIN 15 12 95 65 4 x M12 120 182DIN 20 20 105 75 4 x M12 120 187DIN 25 25 115 85 4 x M12 120 192DIN 40 40 150 110 4 x M16 120 232DIN 50 50 165 125 4 x M16 120 242DIN 80 80 200 160 8 x M16 120 272DIN 100 100 220 180 8 x M16 120 292Please note: these dimensions are intended for guidance only. The application and other customer requirements will render adjustments to the sizesstated. The dimensions can be approximated upon quotation.www.specac.com
Page 1 and 2: illiant spectroscopy ProCell - Proc
Page 3 and 4: Specac | ProCell - Process Flow Cel
Page 7: Specac | ProCell - Process Flow Cel

ProCell - Process Flow Cells - Specac

Create successful ePaper yourself

Delete template?

Save as template?