User Guide for Alliance Planner Programming Software - UniMac

More documents

Recommendations

Info

Changing COM Port (cont.)b. Select the appropriate COM port in the drop-down menu or click the “auto detect” button tofind the correct port. For the auto detect function to work, the machine must be connected tothe PC with the serial cable.CFD999RCFD1000R16 © Copyright, <strong>Alliance</strong> Laundry Systems LLC – DO NOT COPY or TRANSMIT9-05-72R8
Connecting to MachineOPL Models18. Place machine in program mode by turning key.19. Connect cable from the laptop to the machine.1 2 34 5 67 8 9Stop0StartCOM223FCOM223FCoin Models20. Remove coin box.21. Flip programming switch in top right corner of box. Refer to the following illustration.22. Connect cable from the laptop to machine.Program SwitchCable ConnectionCOM212FCOM212F9-05-72R8 © Copyright, <strong>Alliance</strong> Laundry Systems LLC – DO NOT COPY or TRANSMIT17
Page 1 and 2: Alliance PlannerProgrammingSoftware
Page 3: Table of ContentsIntroduction . . .
Page 6 and 7: Installation of the Alliance Planne
Page 9 and 10: Table 1.Training data parameter val
Page 11 and 12: Setting Machine Configurations (con
Page 13 and 14: Saving Cycles13. Click Save to save
Page 15: Changing COM Port17. Change COM por
Page 19 and 20: Connecting to Machine (cont.)Write
Page 21 and 22: Upgrading the Washer Extractor’s

User Guide for Alliance Planner Programming Software - UniMac

Create successful ePaper yourself

Delete template?

Save as template?