Marine Cargo Handling Sheet for NEODOL 23-2

More documents

Recommendations

Info

Cargo Handling Sheet: Neodol 23-2Document Date: 09 April 2012Revision 2Product Details:Product Name: Neodol 23-2Shipping Name:Chemical Family:Product Code:MSDS:Alcohol (C12-C16)poly(1-6) ethoxylates.AlcoholsV2597http://www.euapps.shell.com/MSDS/GotoMsds?loc=shellchemicalsPhysical Properties:Density: 892 kg/m3 @ 40 deg C.Specific Gravity:Kinematic Viscosity: 15mm2/s @ 40 deg C.Vapor Pressure: 0.1 (Pa) @ 29 deg C.Boiling Point: 254 deg C.Melting Point:Not availablePour Point: 0 deg C.Flash Point: 152 deg C.Transshipments are not permitted unless the responsible Shell Chemical charterer has beenconsulted and the operation approved by the Regional Marine Technical Advisor.Marpol Details:Marpol Annex:IIIMO Ship Type: 2IMO Pollution Category:Oil Like:High Viscosity:Solidifying:USCG:YNoNoNoUSCG compatibility group 20, not compatible withgroup 12 Isocyanates.2
Cargo Handling Sheet: Neodol 23-2Document Date: 09 April 2012Revision 2Cargo Handling Requirements:Prepurging of Vessel’s Tanks:Blanket Required:NoYesPercent Oxygen in Nitrogen Blanket: 5%Vapor Space Purge:NoLoading Temperature Range: 10 – 30 deg C.Transit Temperature Range: 15 – 25 deg C.Discharge Temperature Range: 20 – 30 deg C.Maximum Heating Coil Temperature: 65 deg C.Adjacent Maximum Cargo Temperature: 50 deg C.Regional Requirements:None noted at this time.Notes: Nitrogen for blanket application to be 99.99% purity, Maintenance of blanket to be 99.5% purity or greater.Vessel to maintain a constant positive overpressure of between 180-200 millibars during the voyage. Surveyor torecord the type of cargo monitoring system and nitrogen replenishment system installed on the vessel. Vessel to keep adaily log of the overpressure and cargo temperature, and is to present the log to receiver at time of discharge with acopy sent to the charterers.Notes: If Nitrogen blanket is in place and Carrier chooses to transship, carrier must reapply nitrogen blanket on thecargo, both on the discharging and receiving ship, at their time, risk, and expense.Tank Acceptance Requirements:All shore and ship cargo lines and tanks are to be presented clean (residual free), dry, odor free,and rust free, with good gaskets and pressure tested heating coils. Heating coils to be blown clearwith nitrogenPrior Cargo Restrictions:Stainless Steel or Coated Tanks:Wall Wash Required:Styrene and other products which polymerize.Stainless. High baked phenolic and modified phenoliccoatings may be accepted. Carrier to verify suitabilityof coating for productsYesWash Specifications: Using methanol Chlorides 3ppm maxColor APHA
Page 1: Cargo Handling SheetNeodol 23-2Docu

Marine Cargo Handling Sheet for NEODOL 23-2

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?