Product Guide - Telesis Technologies, Inc.
Product Guide - Telesis Technologies, Inc.
Product Guide - Telesis Technologies, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SY50<br />
1064nm wavelength,<br />
water-cooled, single phase,<br />
diode side pumped,<br />
Q-switched, 50W Nd:YAG<br />
laser marker<br />
Good choice for high<br />
speed surface and deep<br />
marking of metals.<br />
Good choice for marking<br />
plastics and label materials.<br />
Can do deep marking<br />
and cutting of silicon.<br />
Cannot mark wood.<br />
Can mark some other<br />
organic materials.<br />
Good choice for<br />
marking metals, glass<br />
and other materials using<br />
chemical marking.<br />
Not recommended<br />
Optional<br />
LY100<br />
1064nm wavelength,<br />
water-cooled, three phase,<br />
lamp pumped,<br />
Q-switched, 90W Nd:YAG<br />
laser marker<br />
Good choice for high<br />
speed surface and deep<br />
marking of metals. Provides<br />
the shortest cycle times<br />
for deep marking.<br />
Good choice for marking<br />
plastics and label materials.<br />
Can do deep marking<br />
and cutting of silicon.<br />
Cannot mark wood.<br />
Can mark some other<br />
organic materials.<br />
Good choice for<br />
marking metals, glass<br />
and other materials using<br />
chemical marking<br />
Can mark high quality<br />
graphics on some metals.<br />
Optional<br />
CO10<br />
10,600nm wavelength,<br />
air- cooled, single phase,<br />
RF excited, 10W CO2<br />
laser marker<br />
Can mark some anodized<br />
metal surfaces.<br />
Excellent choice for high<br />
speed marking plastics and<br />
some label materials.<br />
Not recommended<br />
Excellent choice for<br />
marking wood and other<br />
organic materials.<br />
Good choice for<br />
marking metals, glass<br />
and other materials using<br />
chemical marking<br />
Can mark high quality<br />
graphics on plastics and<br />
on some anodized<br />
metal surfaces.<br />
Optional<br />
CO30<br />
10,600nm wavelength,<br />
air-cooled, single phase,<br />
RF excited, 30W CO2<br />
laser marker<br />
(Will provide shorter cycle<br />
times than CO10.)<br />
Can mark anodized metal<br />
surfaces. With short focal<br />
length lenses, can mark some<br />
non-plated metal surfaces.<br />
Excellent choice for high<br />
speed marking of plastics and<br />
some label materials.<br />
Not recommended<br />
Excellent choice for<br />
marking wood and other<br />
organic materials.<br />
Excellent choice for<br />
marking metals, glass<br />
and other materials using<br />
chemical marking.<br />
Can mark high quality<br />
graphics on plastics and<br />
on some anodized<br />
metal surfaces.<br />
Optional<br />
CO50<br />
10,600nm wavelength,<br />
air-cooled, single phase,<br />
RF excited, 50W CO2<br />
laser marker<br />
(Will provide shorter cycle<br />
times than CO30.)<br />
Can mark anodized metal<br />
surfaces. With short focal<br />
length lenses, can mark some<br />
non-plated metal surfaces.<br />
Excellent choice for high<br />
speed marking plastics and<br />
some label materials.<br />
Not recommended<br />
Excellent choice for<br />
marking wood and other<br />
organic materials.<br />
Excellent choice for<br />
marking metals, glass<br />
and other materials using<br />
chemical marking.<br />
Can mark high quality<br />
graphics on plastics and<br />
on some anodized<br />
metal surfaces.<br />
Optional<br />
For all applications, it is highly recommended<br />
that samples be sent to <strong>Telesis</strong> for<br />
qualifi cation and testing purposes.<br />
Page 21<br />
LASER SELECTION GUIDE