GRI-GM19 Specification - The Geosynthetic Institute

More documents

Recommendations

Info

Specimen Sampling Patternper ASTM D6392
Regarding Shear Testing• 4/5 must spec table value• outlier 80% spec table value• table values are percentages ofsheet tensile strengths• HDPE (~ 95%); LLDPE (varies);fPP (~ 75%)• shear test follows
Page 1 and 2: GRI-GM19 SpecificationSeam Strength
Page 3 and 4: Seam Cross Section
Page 5 and 6: Method of Attributes• follows GRI
Page 7: ShearTestPeel Test
Page 11 and 12: Shear TestPhoto 2
Page 13 and 14: Shear TestPhoto 4
Page 15 and 16: Regarding Shear ElongationELLo(100)
Page 17 and 18: Regarding Peel Testing• 4/5 must
Page 19 and 20: Peel TestPhoto 2
Page 21 and 22: Peel TestPhoto 4
Page 23 and 24: Regarding Peel Separation• also c
Page 25 and 26: Locus-of-Break Patterns (Codes)•
Page 27 and 28: Unacceptable Extrusion Fillet Welds
Page 29 and 30: SIP in Dual Track Hot Wedge SeamSIP
Page 31: The Basic Tables FollowHDPE - smoot

GRI-GM19 Specification - The Geosynthetic Institute

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?