RONDOFLEX (C)-FC - Prysmian Group

Technical DataElectricalparametersThermalparametersTypeType designationRONDOFLEX (C) - FC(N)GRDGCGOEU-JApprovals/ standards Based on DIN VDE 0250, Part 814VDE Reg. No. 7841; GOST RApplicationRated voltageMaximum permissibleoperating voltage in ACsystemsAC test voltagemax. permissible peak ACvoltageFor connection on frequencyconverterFor use on festoon systems, e.g. on gantry cranes, hall gantry cranes, rackmaterial handling equipment, transportation systems or machine tools.Especially where some danger interferance of data cables produced by powercables can be expected or max. emission values acc. to EN 55011/55022 mustbe achieved.The cables are used for high mechanical stresses and frequent bending. Alsosuitable for use as a flexible motor power supply cable.Uo/U = 0.6/1 kVU max (eff) = 1.2 kV5 kV, 5 minU^= 2.4 kVU max = 690VCurrent-carrying capacity According to DIN VDE 0298, Part 4EMVAmbient temperature- Fully flexible operation -35°C to +80°C- Fixed installation -50°C to +80°CMaximum permissibleoperating temperature of theconductorShort-circuit temperature ofthe conductorGiven because of a special cable design90°C250°CMechanicalparametersChemicalparametersTensile loadTorsional stressesUp to 15 N/mm²No applicationMinimum bending radii According to DIN VDE 0298, Part 3Travel speed- Trolley Guidance value: up to 240m/mincomment: The trouble free operation is influence by a number of factors (e.g.space, cable weight, loop length, number of motor driven carriers).It is recommended to consult the cable manufacturer at travel speeds beyond240 m/min.Additional testsBending testResistance to oil DIN VDE 0473, Part 811-2-1, Para. 10Weather resistanceUnrestricted use outdoors and indoors, resistant to ozone, UV and moisture