Data Sheet - Cooper Bussmann

Technical Data 720147 Effective February 2013Bussmann10 x 38 mm Modular fuse holdersProduct descriptionBussmann’s range of modular fuse holdersprovide more space for cabling due to their compactdesign and are suitable for most applicationsincluding photovoltaic.Standard featuresColour coded for simple visual identification:yellow for PV (1000 VDC), red for IEC(690 VAC) and black for UL (600 VAC/VDC)applicationsCHPV Models, with 1000 VDC rating for usewith solar gPV fuse links are suitable forphotovoltaic applications of any sizeTested to a wide range of standards: IEC,cULus, CCC, CSA and UR, allowing for useacross global applicationsWorld class footprint - smaller than anyother modular fuse holders, reducing installationspace requiredToolless DIN-Rail mounting, improves easeof use and reduces installation time andcostsRated for use with 75 o C or 90 o C wire, finestranded wire, spade terminals and withcomb-bus bars. Use any higher temperaturerated wire with appropriate derating

Bussmann10 x 38 mm Modular fuse holdersTechnical Data 720147Effective February 2013FeaturesMulti-Pole gangingUse multi-pole connection kit part number4mmLockoutFeature inFuse CarrierHole for WireSecurity TagOptionalOpen FuseIndicatorLabel SlotSelf-Extinguishing,UL 94V0 RatedPolyesterMaterialJV-L to gang multiple poles together.JV-L kit is sufficient to gang up to 4 poles.Captive, FullyBacked OutPhil-Slot ScrewSpade LugConnectionToollessGanging ofMultiplePolesBox Lug Cable Terminalto Accept 4-18AWGWire, 1 to 25mm 2 cableor 6mm Bus BarConnectionToolless DIN-RailMountingWire StripLengthIndicatorDimensional data - mm (in)18.6[ 0.732 ]61.8[ 2.434 ]70[ 2.756 ]52.5[ 2.067 ]35[ 1.378 ]17.5[ 0.689 ]73.9[ 2.909 ]83.2[ 3.275 ]42.6[ 1.676 ]52.8[ 2.080 ]Removing instructions1 Press down on top of DIN-Rail9[ 0.354 ]7.5[ 0.295 ]2 - Rotate out on the bottomEATON www.eaton.com3

Technical Data 720147Effective February 2013Bussmann10 x 38 mm Modular fuse holdersProduct design and labels specificationsChanges to the products, to the informationcontained in this document, and to pricesare reserved; so are errors and omissions.Only order confirmations and technicaldocumentation by Eaton is binding. Photosand pictures also do not warrant a specificlayout or functionality. Their use in whateverform is subject to prior approval by Eaton.The same applies to Trademarks (especiallyEaton, Moeller, and Cutler-Hammer). TheTerms and Conditions of Eaton apply, asreferenced on Eaton Internet pages andEaton order confirmations.Eaton Industries Manufacturing GmbHElectrical Sector EMEARoute de la Longeraie71110 Morges, SwitzerlandEaton.eu© 2014 EatonAll Rights ReservedPublication No. 720133January 2014Eaton is a registered trademark.All other trademarks are propertyof their respective owners.