Risk Management - Workplace Safety and Health Council

More documents

Recommendations

Info

Appendix F: Additional NotesSafe Work ProceduresArising from the RA, SWPs should be established, communicated and implemented for work which may posesafety and health risks. The SWPs should include the safety precautions to be taken in the course of work andduring an emergency, as well as the provision of PPE. They should then be monitored regularly and reviewedperiodically.Residual RisksResidual risks are the remaining risks after implementation of risk controls. The RA team should ensure that residualrisks are acceptable and manageable; and highlight the residual risks of each of the controls.For example, if the risk control involves the use of safety harnesses and lanyards (a type of PPE), one of theresidual risks is that the workers may not anchor the lanyards to protect themselves. In this case, the RA Teammay highlight pre-job safety briefing (administrative control) as a further measure to ensure that residual risks arefurther minimised.Once all the risk controls are selected and their residual risks highlighted, the RA Team needs to identify the actionofficers and follow-up dates. In this way, the specific action officers to implement the controls can be clearlyidentified, and the follow-up dates will help to ensure timeliness in implementation.27
AcknowledgementsThe RMCP was developed by an industry-led Work Group whose members with expertise are drawn acrossmajor industry sectors. The active participation by the public during the public consultation period has helpedto strengthen this RMCP. The WSH Council would like to thank the public, the industry and the WSH Communityfor their strong engagement. The Council also thanks the Work Group members who dedicated their time intheir individual capacity to make this RMCP possible: Mr. Seet Choh San, Mr. Ong See Hee, Mr. Lim Poo Yam,Dr. Ting Seng Kiong, Dr. Gregory Chan and Ms. Jaime Lim (representative from the Ministry of Manpower). TheCouncil appreciates Mr. Lim Meng Ann and Mr. Han Kin Sew from the WSH Council for their active involvementin this effort.28
Page 5 and 6: 1. PurposeThe purpose of this Code
Page 7 and 8: 3. DefinitionsAdditional ControlEmp
Page 9: 5. General Requirements5.1 General5
Page 14 and 15: 7. Risk Assessment7.1 General Requi
Page 16 and 17: 7.3.3.2 Where there is more than on
Page 18 and 19: 7.3.8.3 Likelihood shall be listed
Page 20 and 21: 8. Implementation8.1 RA Approval8.1
Page 22 and 23: Appendix A: Risk Management Process
Page 24 and 25: Appendix C: Risk Assessment FormRis
Page 26 and 27: Appendix E: Risk Register and Cover
Page 30: Published in February 2011 by the W

Risk Management - Workplace Safety and Health Council

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?