XTR-311 MSDS - His Glassworks

His Glassworks, Inc. - XTR-311 Part A MSDS SheetsRevision Date 04/01/2013Material Safety Data SheetProduct Name:XTR-311 Epoxy Adhesive Part A (Resin)MSDS Date: 04/01/20131. PRODUCT AND COMPANY IDENTIFICATIONProduct Name:Manufacturer:Emergency Phone number:XTR-311 Part A (Resin)His Glassworks, Inc.828-254-2559ChemTel, Inc.Toll Free: 800-255-3924International: +813-248-05852. COMPOSITION AND INFORMATION ON INGREDIENTSComponent CAS# ConcentrationEpoxy resin 30583-72-3 >90%Oxirane, Mono[(C12-14-alkyloxy)methyl] 68609-97-2

His Glassworks, Inc. - XTR-311 Part A MSDS SheetsRevision Date 04/01/20134. FIRST AID MEASURESInhalation:Skin Contact:Eye Contact:Ingestion:Remove to fresh air.Wash skin with water using soap if available. Ifpersistent irritation occurs, contact a physician.Flush eyes with water. If persistent irritation occurs,contact a physician.Do not induce vomiting without medical advice.Immediate medical attention is required. Never giveanything by mouth to an unconscious person. Call aphysician.Notes to PhysicianTreatment:Treat symptomatically.5. FIRE-FIGHTING MEASURESSuitable extinguishing media:FoamCarbon dioxide (CO2)Dry ChemicalSand or earth may be used for small fires only.Extinguishing media which shall notbe used for safety reasons:Specific hazards during fire fighting:Special protective equipment forfire-fighters:Do not use a solid water stream as it may scatter andspread fire.Keep adjacent containers cool by spraying with water.Wear self-contained breathing apparatus and protectivesuit.6. ACCIDENTAL RELEASE MEASURESPersonal precautions:Environmental precautions:Avoid contact with skin, eyes and clothing.Prevent contamination of soil and water.Discharge into the environment must be avoided.2

His Glassworks, Inc. - XTR-311 Part A MSDS SheetsRevision Date 04/01/2013Do not flush into surface water or sanitary sewersystem.Methods for clean-up:Absorb liquid with sand, earth or spill control material.Shovel up and place in a labelled, sealable container forsubsequent safe disposal. Scrub contaminated surfaceswith detergent solution.7. HANDLING AND STORAGEHandlingHandling:Avoid contact with skin, eyes and clothing.Avoid breathing vapors, spray or mist.StorageRequirements for storageareas and containers:Keep containers tightly closed in dry, cool and well ventilatedplace.8. EXPOSURE CONTROL / PERSONAL PROTECTIONEngineering measures:Eye protection:Hand protection:Skin and body protection:Respiratory protection:Use with local exhaust ventilation.Wear safety glasses with side shields.Rubber gloves.Standard issue work clothes.In case of insufficient ventilation wear suitable respiratoryequipment.9. PHYSICAL AND CHEMICAL PROPERTIESForm:Color:Odor:Viscous liquidColorlessOdorlessSpecific gravity: 1.09Melting point/range: 10ºC (50º F)3

His Glassworks, Inc. - XTR-311 Part A MSDS SheetsRevision Date 04/01/2013Biodegradability:Toxicity to fish:This section will be updated as ecological reviews arecompleted.This section will be updated as ecological reviews arecompleted.13. DISPOSAL CONSIDERATIONSObserve all Federal, State and Local Environmental regulations.14. TRANSPORT INFORMATIONDOT Classification:Not regulated for transportIATA Classification:Not regulated for transport15. REGULATORY INFORMATIONUS Toxic Substances ControlAct:Australia (Industrial ChemicalNotification and AssessmentAct)CanadaJapanKoreaPhillipinesChinaSwitzerlandNew ZealandOn TSCA InventoryOn the inventory or in compliance with the inventoryAll components of this product are on the Canadian DSL list.Not listedOn the inventory or in compliance with the inventoryOn the inventory or in compliance with the inventoryOn the inventory or in compliance with the inventoryOn the inventory or in compliance with the inventoryOn the inventory or in compliance with the inventory5

His Glassworks, Inc. - XTR-311 Part A MSDS SheetsRevision Date 04/01/201316. OTHER INFORMATIONHealth: 2Flammability 1Reactivity: 0Personal Protection 0HMIS III6

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/13Material Safety Data SheetProduct Name:XTR-311 Epoxy Adhesive Part B (Hardener)MSDS Date: 04/01/20131. PRODUCT AND COMPANY IDENTIFICATIONProduct Name:Manufacturer:Emergency Phone number:XTR-311 Part B (Hardener)His Glassworks, Inc.828-254-2559ChemTel, Inc.Toll Free: 800-255-3924International: +813-248-0585!2. COMPOSITION AND INFORMATION ON INGREDIENTSComponent CAS# ConcentrationTeta, reaction products with propylene oxide 26950-63-0 50-55%Polyoxypropylene triamine 39423-51-3 20-25%Triethylenetetramine 112-24-3 15-20%3. HAZARDS IDENTIFICATIONPhysical StateColorOdorHazard SummaryLiquidClear, colorlessslight ammoniaHarmful if swallowed. Severe eye irritant. Severe respiratoryirritant. Sever skin irritantPotential Health EffectsSkin:Irritating to skin.Prolonged skin exposure can be corrosive.1

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/13Eyes:Severe eye irritation.Causes itching, burning, redness and tearing.Ingestion:Inhalation:Aggravated Medical Condition:Harmful if swallowed.May cause respiratory tract irritation.Eye disease.Asthma.Skin disorders and AllergiesCarcinogenicityCalifornia Prop 65: This product does not intentionally contain any chemicals which havebeen identified by the state of California to cause cancer, birth defects, or other reproductiveharm.4. FIRST AID MEASURESInhalation:Skin Contact:Eye Contact:Ingestion:Remove to fresh air; if breathing is labored, seekmedical attentionremove with soap and water: if redness or rashdevelops seek medical attention: launder contaminatedclothing before use.Flush with water for 15 minutes; seek medical attentionDo not induce vomiting without medical advice.Immediate medical attention is required. Never giveanything by mouth to an unconscious person. Call aphysician.Notes to PhysicianTreatment:Treat symptomatically.5. FIRE-FIGHTING MEASURESSuitable extinguishing media:FoamCarbon dioxide (CO2)2

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/13Dry ChemicalSpecific hazards during fire fighting:Special protective equipment forfire-fighters:Incomplete combustion may form carbon monoxide.Wear self-contained breathing apparatus and protectivesuit.6. ACCIDENTAL RELEASE MEASURESPersonal precautions:Wear personal protective equipmentImmediately evacuate personnel to safe areas.Ensure adequate ventilation.Do not swallow.Avoid breathing vapors, mist or gas.Avoid contact with skin, eyes and clothing.Environmental precautions:Prevent further leakage or spillage if safe to do so.Discharge into the environment must be avoided.Environmental precautions:Do not flush into surface water or sanitary sewersystem.Prevent product from entering drains.Collect contaminated fire extinguishing waterseparately. This must not discharge into drains.Methods for clean-up:Methods for clean-up:Ventilate the area.Contain and collect spillage with non-combustibleabsorbent materials, e.g. sand, earth, vermiculite,diatomaceious earth and place in container for disposalaccording to local regulations7. HANDLING AND STORAGEHandlingHandling:Wear personal protective equipment.Use only in well ventilated areas.3

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/13Keep container tightly closed.Do not swallow.Avoid breathing vapors, mist or gas.Avoid contact with skin, eyes and clothing.StorageRequirements for storageareas and containers:Keep containers tightly closed in dry, cool and well ventilatedplace.Containers which are opened must be carefully resealed andkept upright to prevent leakage.Keep away from oxidizers8. EXPOSURE CONTROL / PERSONAL PROTECTIONProtective Measures:Engineering measures:Ensure that eyewash stations and safety showers are closeto the workstation location.Use with local exhaust ventilation.Prevent vapor buildup by providing adequate ventilationduring and after use.Eye protection:Wear appropriate safety eye wear.Wear safety glasses with side shields.Hand protection:Skin and body protection:Solvent resistant gloves.Solvent resistant apron.Long sleeve shirts recommended.Respiratory protection:Hygiene measures:In case of sufficient ventilation wear suitable respiratoryequipment.When using, do not eat or drink or smoke.Wash hands before breaks and immediately after handlingthe product.Keep work clothes separate.Remove and wash contaminated clothing before re-use.Do not swallow.4

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/13Avoid breathing vapors, mist or gas.Avoid contact with skin, eyes and clothing.9. PHYSICAL AND CHEMICAL PROPERTIESForm:Color:Odor:pH:Water solubility:Boiling point/range:Liquid, clearColorlessAmmoniacalno datano datano dataFlash point: 175º C (347º F)Relative vapor density: >1 (Air = 1.0)Vapor pressure:

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/1311. TOXICOLOGICAL INFORMATIONAcute oral toxicity:LD50 ratDose: 220 mg/kgAcute dermal toxicity:LD50 rabbitDose: 562 mg/kg!12. ECOLOGICAL INFORMATIONNone Determined13. DISPOSAL CONSIDERATIONSObserve all Federal, State and Local Environmental regulations.14. TRANSPORT INFORMATIONDOT Classification:Proper shipping name:Corrosive liquid, toxic n.o.s. (Polyoxypropylene triamine andTriethylenetetramine)Class: 8 (6.1)UN ID#:Packing Group:UN2922IIIIATA Classification:Proper shipping name:Corrosive liquid, toxic n.o.s. (Polyoxypropylene triamine andTriethylenetetramine)Class: 8 (6.1)UN2922Packing Group:III6

His Glassworks, Inc. - XTR-311 Part B MSDS SheetsRevision Date 04/01/1315. REGULATORY INFORMATIONCanadaSARA 312 HazardClassification:SARA Title III Section 313:TSCA Inventory Status:WHMIS Identification: Class ECDSL/NDL (Canadian Domestic Substance LIst/NonDomestic Substance List): Listed on CDSLAcute Health Hazard, Chronic Health HazardNoneAll components of this formula are on the TSCA inventory16. OTHER INFORMATIONHMIS IIINFPAHealth: 2 2Flammability 1 1Reactivity: 0 0Personal Protection 0 07