DIRECTORY OF AGA CERTIFIED PRODUCTS Gas, Electrical ...

Rated Rated
Working Operating Working Operating
Nominal Connections Designation Pressure Position Nominal Connections Designation Pressure Position
Size mm in kPa (See Key) Size mm in kPa (See Key)
Invensys Controls Australia Pty Ltd
INVENSYS
5623 10.97
NC-4100-5 Series Thermal Bi-Metal Valve
Single or Dual Outlet 3.5 2
Optional: Norton Model 501A IGN Hot
Surface Ignitor (HSI) 3.5 2
AUTOMATIC SHUT-OFF VALVES
(CLASS 1) (AG 214)
Ascomation Pty Ltd
ASCO
2504 4.76
262 Series 2-Way. Direct Acing, Disc-On-Seat Solenoid Valves.
6 1/8 ******-*-262C2 AC 200 2
8 ¼ ******-*-262C13 AC 140 2
8 ¼ ******-*-262C90 AC 120 2
8 ¼ ******-*-262B210 AC 280 2
Ambient Temperature 0°C to 77°C
Options: 1 st Character Set, Coil and Enclosure Type
AG, AGU, AGUS, AGSC, EAAG, VMAG, WSVMAG and
WPAG.
2 nd Character Set, Thread Type
‘B’ NPT, ‘D’ BSPT and ‘E’ BSPP
2505 4.76
AGD030 Series. Disc on seat valve. D.A. Sol.
10 3/8 BSP AGD030B10 AC 40 2
15 ½ BSP AGD030A16 AC 14 2
Optional construction with NPT thread has “D” replaced with “B”
e.g. AGB030B10.
Optional solenoids are indicated by prefixes: EA, FA, SC or SD.
Eg: EAAGD030B10
2506 4.76
AGD040 Series. Disc on seat valve. D.A. Sol.
15 ½ BSP AGD040B2 AC 9 2
20 ¾ BSP AGD040B3 AC 9 2
Optional construction with NPT thread has “D” replaced with “B”
e.g. AGB040B2.
Optional solenoids are indicated by prefixes: EA, FA, NE, SC, VF
eg: AGSCD40B2
Asco UK EG Series
15 ½ Rp EGSCE040B2 AC 9 2
Optional construction with NPT thread as “E” replaced with “8”
eg: EGSC8040B2
2867 11.82
AGD044 Series. Disc on seat valve. D.A. Sol. Manual reset.
20 ¾ BSP AGD044B1 AC 175 1
25 1 BSP AGD044A2 AC 175 1
32 1¼ BSP AGD044A3 AC 175 1
40 1½ BSP AGD044A4 AC 175 1
50 2 BSP AGD044A5 AC 140 1
65 2½ BSP AGD044A6 AC 70 1
80 3 BSP AGD044A7 AC 70 1
Optional construction with NPT thread has “D” replaced with “B”
(eg: AGB044B)
Optional Solenoids are prefixed “NE” “SC” (eg: AGSCD044B)
129
Ascomation Pty Ltd Continued … … …
ASCO
2874 6.83
AGD042 “C” and “D” Series. Disc on seat valve. D.A. Sol.
20 ¾ BSP AGD042D35 AC 350 1
25 1 BSP AGD042C45 AC 350 1
32 1¼ BSP AGD042C55 AC 350 1
40 1½ BSP AGD042C65 AC 350 1
Optional construction with NPT thread has “D” replaced with “B”
e.g. AGB042D35.
Optional solenoids are not available.
3205 3.81
AGD261 Series. Disc on seat valve. D.A. Sol.
6 1/8 BSP AGD2618 AC 420 2
Optional construction with NPT thread has “D” replaced with “B”
e.g. AGB2618.
Optional solenoids are indicated by prefix “US” e.g. AGUSD2618.
Gosfern Pty Ltd
SKOTCH
4633 8.92
Trifecta T4000 Series. Double block and vent valve. Pneumatic.
25 1 Flange T4106 345 2
50 2 Flange T4206 345 2
80 3 Flange T4306 345 2
100 4 Flange T4406 345 2
150 6 Flange T4606 345 2
Honeywell Limited
HONEYWELL
2705 10.78
V5055 Series. Disc on seat valve and Direct Mount
Electro/Hydraulic Actuators
20 – 80mm Sizes ¾”-3” V5055*--- 105/310/517 2
100mm Sizes 4” V5055*--- 105 2
Available with NPT/BSP/4” Flange.
Higher pressures applicable for V5055D, E versions.
V5055A--- Low pressure on/off
V5055B--- Low pressure characterized valve
V5055C--- Low pressure. Double seat
V5055D--- High pressure on/off
V5055E--- High pressure. Double seat.
The above operate with actuators as follows:
V5055A, B, C, D, E V4055A, B, C, D, E ¾”-3”
V5055B V4062A, D, V90555A, D ¾”-3”
V5055A, B V4055A, B, C, D, E,
V4062A, D, V90555A, D 4” only
V5055C V4055A, B, C, D, E,
V4062A, D, V90555A, D 4” only
Note: (i) The final four digits after V5055*---, have no
effect on the safety of the valve but determine finer
characteristics and individual customer special
requirements. For more information, please
contact Honeywell.
(ii) These products carry Factory Mutual Approval.
AGA Product Directory - July 2006 Edition