You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
206 207<br />
<strong>Softail</strong><br />
put your signature on ours.<br />
We set out to build the very essence of the <strong>Harley</strong>-Davidson<br />
motorcycle. And what emerged was the <strong>Softail</strong> – a bike with classic<br />
hardtail looks and plenty of space where you can leave your mark.<br />
2003 flstci Stock Production Paint, 100th Anniversary two-tone – Sterling Silver and Vivid Black
208<br />
heritage <strong>Softail</strong>classic<br />
This Heritage <strong>Softail</strong> Classic is a perfect<br />
blend of old and new, featuring Headlamp,<br />
Passing Lamp and Turn Signal Trim Rings,<br />
Wide Beach Handlebar and 100th Anniversary<br />
Tank Panel, with old-school looks courtesy<br />
of the Nostalgic and “Classic Chrome”<br />
Collections.<br />
NEW BEACH BARS FOR HERITAGE CLASSIC<br />
56364-02<br />
NEW JIFFY STAND STRAP AND<br />
FASTENER KIT<br />
50306-02<br />
NEW SWINGARM PIVOT BOLT AND NUT KIT<br />
47119-02<br />
NEW COMBINATION SPEEDO/TACH KIT<br />
74461-03<br />
NEW CHROME LOWER TRIPLE TREE COVER<br />
66053-01<br />
NEW 100TH ANNIVERSARY TANK PANEL<br />
62075-03<br />
NEW WIDE WHITEWALL TYRE<br />
43118-92A Front<br />
43353-03 Rear<br />
NEW SWINGARM PIVOT AXLE KIT<br />
47119-02<br />
HEADLAMP TRIM RING<br />
69626-99<br />
PASSING LAMP TRIM RINGS<br />
69622-99A (pair)<br />
TURN SIGNAL TRIM RINGS<br />
69740-01 (2 sets)<br />
CHROME UPPER FORK SLIDER COVERS<br />
45963-97<br />
CHROME LOWER FRONT FORK SLIDERS<br />
46482-00 <strong>Softail</strong><br />
CLASSIC CHROME FRONT<br />
AXLE NUT COVER KIT<br />
43899-86A<br />
CHROME FRONT FENDER SKIRT<br />
59228-91<br />
CHROME FORK COVER KIT<br />
67890-91A<br />
NOSTALGIC HAND GRIPS<br />
56275-96A<br />
CHROME HAND CONTROL<br />
LEVER KIT<br />
45075-96<br />
CHROME SWITCH HOUSING KIT<br />
70222-96<br />
CHROME MASTER CYLINDER COVER<br />
45078-96A<br />
2003 flstci Stock Production Paint, 100th Anniversary Two-Tone – Sterling Silver and Vivid Black<br />
CHROME CLUTCH BRACKET AND MASTER<br />
CYLINDER RESERVOIR KIT<br />
45284-99<br />
CHROME VOLTAGE REGULATOR COVER<br />
74597-01<br />
OIL PRESSURE GAUGE KIT<br />
75133-99<br />
BRAIDED OIL LINES<br />
63860-00<br />
NOSTALGIC SHIFTER PEGS<br />
34627-99 (2)<br />
RIDER FOOTBOARD ASSEMBLY, OLD STYLE<br />
50599-89T (2 sets)<br />
NOSTALGIC BRAKE PEDAL PAD<br />
44248-96<br />
SOFTAIL FRAME TRIM SET<br />
47300-88T<br />
PROFILE LOW SUSPENSION<br />
54596-94 Front<br />
54648-00 Rear<br />
HARLEY-DAVIDSON SOFTAIL SLIP-ON<br />
MUFFLERS<br />
80378-00 Slash Down<br />
LAYBACK LICENSE PLATE<br />
MOUNTING KIT<br />
59817-00<br />
209
210 211<br />
<strong>Softail</strong>standard<br />
The all-new Black Bones Radical Custom Paint<br />
scheme forms the centrepiece of this <strong>Softail</strong><br />
Standard, which features road-hugging Profile<br />
Low Rear Suspension and Baloney Cut Slip-On<br />
Mufflers. A new Slotted Style Heel Rest Kit,<br />
Brake Pedal Pad and Pegs combine with front<br />
and rear Mirror Chrome ThunderStar Wheels to<br />
add polish to this custom brute.<br />
NEW RADICAL PAINT —<br />
BLACK AND BONE WHITE<br />
95703-03BGB<br />
NEW SLOTTED STYLE<br />
SHIFTER PEG<br />
34673-02 (2 sets)<br />
NEW SLOTTED STYLE HEEL REST PEG KIT<br />
50288-02<br />
NEW SLOTTED STYLE BRAKE PAD<br />
42799-02 Small<br />
NEW 100TH ANNIVERSARY BADLANDER SEAT<br />
53304-03<br />
THUNDERSTAR MIRROR CHROME WHEEL<br />
43602-00 21" Front<br />
43649-00 16" Rear<br />
THUNDERSTAR FLOATING BRAKE ROTOR<br />
44365-00 Front<br />
44366-00 Rear<br />
THUNDERSTAR BILLET SPROCKET<br />
40126-00<br />
CHROME LOWER FORK SLIDERS<br />
46477-00<br />
BILLET TRIPLE TREE KIT<br />
45748-01<br />
CHROME FRONT CALIPER KIT<br />
44395-00<br />
CLASSIC CHROME BRAKE CALIPER INSERTS<br />
44477-99 (2)<br />
CLASSIC CHROME FRONT AXLE NUT COVERS<br />
43899-86A<br />
SMOKED TURN SIGNAL LENSES<br />
69304-02<br />
OVAL BAR & SHIELD BILLET STYLE MIRRORS<br />
91962-98<br />
CONTOURED CHROME & RUBBER<br />
HAND GRIPS<br />
56459-01<br />
CUSTOM HAND CONTROL LEVERS<br />
45459-02<br />
CHROME SWITCH HOUSING KIT<br />
70222-96<br />
CHROME MASTER CYLINDER<br />
COVER<br />
45078-96A<br />
CHROME CLUTCH BRACKET AND MASTER<br />
CYLINDER RESERVOIR KIT<br />
45284-99<br />
MINI TACH KIT<br />
67848-96B<br />
BILLET MINI TACH MOUNT<br />
AND HANDLEBAR CLAMP<br />
68962-98<br />
SKULL LEATHER TANK PANEL<br />
91001-01<br />
HARLEY-DAVIDSON AIR CLEANER COVER<br />
29754-01<br />
“H-D MOTOR CO.” TIMER COVER<br />
32691-99 Satin Chrome<br />
SLOTTED STYLE FOOTPEGS<br />
43280-01 (2 sets)<br />
BILLET HEEL RESTS FOR<br />
FORWARD CONTROLS<br />
50227-01<br />
2003 fxst Colour Shop Radical Paint, Bones—Black and Bone White<br />
BILLET STYLE REAR<br />
BRAKE LEVER<br />
42632-00<br />
CHROME REAR<br />
CALIPER KIT<br />
44414-01<br />
SLIP-ON MUFFLERS,<br />
BALONEY CUT<br />
80375-00 Shorty Dual Style<br />
SIX-SHOOTER REAR AXLE<br />
COVER AND ADJUSTER<br />
48179-98A<br />
PROFILE LOW REAR<br />
SUSPENSION<br />
54648-00A
212 213<br />
<strong>Softail</strong> deuce<br />
When this Deuce rumbles to life, it’s poetry in<br />
motion thanks to the elegance of its new Select<br />
Bright Pearl White-over-White Ghost Flames<br />
Paint scheme and Chrome Slotted Six-Spoke<br />
Wheels. More custom appeal is supplied by a<br />
full complement of Smooth Chrome Grips,<br />
Pegs and Pads, and other choice options like a<br />
Mini-Tach Mount Kit and Chrome-Plated<br />
Swingarm.<br />
NEW GHOST FLAMES SELECT<br />
PAINT – BRIGHT PEARL WHITE<br />
OVER WHITE<br />
95704-03BFJ<br />
NEW CHROME SIX SPOKE SLOTTED<br />
CUSTOM WHEEL<br />
43934-02 17" Rear<br />
43924-02 21" Front<br />
NEW BUCKSHOT HAND<br />
CONTROL LEVERS<br />
45430-02<br />
NEW DEUCE MINI TACH<br />
MOUNT KIT<br />
69188-02<br />
NEW BULLET STYLE SHIFT LINKAGE<br />
34616-02<br />
NEW BULLET SHIFT LEVER<br />
34604-02<br />
NEW LOW-PROFILE OSTRICH SEAT<br />
52074-02 Icarus Pattern<br />
HARLEY-DAVIDSON AIR<br />
CLEANER COVER<br />
29754-01<br />
HEADLAMP TRIM RING<br />
69624-99A<br />
SCREAMIN’ EAGLE CHROME<br />
FORK BRACE<br />
46265-02<br />
CHROME LOWER TRIPLE TREE COVER<br />
66021-00<br />
CHROME FRONT CALIPER KIT<br />
44395-00<br />
CLASSIC CHROME FLOATING BRAKE ROTOR<br />
44821-00 Front<br />
44822-00 Rear<br />
DOMED BILLET STYLE MIRRORS<br />
91519-99<br />
MINI TACH KIT<br />
67941-96B<br />
CLEAR TURN SIGNAL LENS KIT<br />
69303-02 Bullet<br />
CHROME CLUTCH BRACKET AND<br />
MASTER CYLINDER RESERVOIR KIT<br />
45284-99<br />
CHROME SWITCH HOUSING KIT<br />
70222-96<br />
2003 fxstd Colour Shop Select Paint, Ghost Flame—Bright Pearl White over White<br />
CONTOURED CHROME AND RUBBER CUSTOM<br />
HAND GRIPS<br />
56459-01<br />
CHROME PUSHROD COVER KIT<br />
18096-00<br />
CHROME BILLET LIFTER COVERS<br />
18088-02<br />
SMOOTH CHROME BILLET HEEL RESTS FOR<br />
FORWARD CONTROLS<br />
50262-01<br />
CHROME FORWARD CONTROL BRACKETS<br />
33920-00<br />
SMOOTH CHROME BRAKE PEDAL PAD<br />
42689-02 Small<br />
SMOOTH CHROME SHIFTER PEG<br />
43122-01<br />
SMOOTH CHROME BILLET FOOTPEGS<br />
43120-01 Large<br />
43122-01 Small<br />
CHROME-PLATED SWINGARM FOR<br />
SOFTAIL<br />
48442-00<br />
CHROME REAR CALIPER KIT<br />
44414-01<br />
CHROME SIX SPOKE SLOTTED SPROCKET<br />
40447-01<br />
SLIP-ON MUFFLERS, BALONEY CUT<br />
80381-00 Shotgun Style
214 215<br />
Fat boy<br />
On the left, accessories from the 100th Anniversary<br />
Collection are combined with <strong>Softail</strong> Leather<br />
Saddlebags and a Fat Boy Double Bucket Seat for<br />
custom mile munching, while the Fat Boy on the<br />
right announces its custom presence with new<br />
Real Fire Radical Custom Paint, matching Flame<br />
Handgrips and Mirror Chrome ThunderStar<br />
Custom Wheels.<br />
LEFT PAGE<br />
NEW 100TH ANNIVERSARY<br />
BILLET COLLECTION<br />
32113-03 Timer Cover<br />
25001-03 Derby Cover<br />
NEW 100TH ANNIVERSARY<br />
AIR CLEANER INSERT<br />
29019-03<br />
NEW RIGID CHROME SIDEPLATES<br />
53378-03<br />
DETACHABLE LOW-PROFILE<br />
WINDSHIELD<br />
58651-97A Lightly Smoked<br />
CHROME HEADLAMP NACELLE<br />
67907-96<br />
HEADLAMP TRIM RINGS<br />
69627-99<br />
HALOGEN FOG LAMP KIT<br />
68247-98<br />
PASSING LAMP TRIM RINGS<br />
69622-99A<br />
CHROME LOWER FORK SLIDERS<br />
46482-00 Front<br />
FAT BOY SLOTTED WHEEL<br />
41022-00 Front<br />
41017-00 Rear<br />
CHROME LOWER BELT GUARD<br />
60316-00<br />
FAT BOY DOUBLE BUCKET SEAT<br />
51570-00<br />
SMOOTH SHORT RAIL BACKREST PAD<br />
52517-94 Smooth<br />
SHORT RAIL UPRIGHT<br />
52737-94A<br />
SOFTAIL LEATHER SADDLEBAGS<br />
92000-00A<br />
RIGHT PAGE<br />
NEW REAL FIRE RADICAL CUSTOM PAINT —<br />
BLACK WITH BLUE FLAME<br />
95710-03BFY<br />
NEW FLAME HAND GRIPS<br />
56518-02<br />
NEW 100TH ANNIVERSARY BILLET AIR<br />
CLEANER INSERT<br />
29797-02<br />
SCREAMIN’ EAGLE EFI<br />
STAGE I KIT<br />
29756-01<br />
BILLET AIR CLEANER<br />
29745-00<br />
ENGINE/TRANSMISSION<br />
COVERS<br />
66508-00 Side<br />
66510-00 Top<br />
CHROME UPPER FORK SLIDER<br />
COVERS<br />
45963-97<br />
CHROME LOWER FORK SLIDERS<br />
46482-00<br />
2003 flstf/i Stock Production Paint, 100th Anniversary—Vivid Black<br />
Colour Shop Radical Paint, Real Fire—Black with Blue Flame ;<br />
MIRROR CHROME THUNDERSTAR<br />
CUSTOM WHEEL<br />
43609-00 16" Front<br />
43649-00 16" Rear<br />
LOW-PROFILE STITCHED SEAT<br />
52436-02 Rider Pattern<br />
CHROME-PLATED SWINGARM FOR<br />
SOFTAIL MODELS<br />
48442-00<br />
LAYBACK LICENCE PLATE MOUNT<br />
59817-00A<br />
PROFILE LOW SUSPENSION<br />
54596-94 Front<br />
54648-00 Rear
216<br />
heritage Springer<br />
Nostalgic 1930s Olive Green and Black Select<br />
Custom Paint brings out the history in this<br />
Heritage Springer, whose muted tones allow<br />
brilliant accessories like 100th Anniversary<br />
Derby and Timer Covers to shine through.<br />
Not a bike that likes to sit on a trailer, this<br />
custom vision boasts a deep-breathing<br />
Screamin’ Eagle Stage I Kit to enhance this<br />
“old-timer’s” performance.<br />
NEW SELECT OLIVE GREEN AND BLACK<br />
30’S STYLE NOSTALGIC CUSTOM PAINT<br />
95711-03BFN<br />
NEW 100TH ANNIVERSARY COVERS<br />
32113-03 Timer<br />
25001-03 Derby<br />
NEW EFI FUEL FITTING COVER KIT<br />
62883-02<br />
NEW TURN SIGNAL RELOCATION KIT<br />
90366-03 Rear<br />
NEW DOCKING HARDWARE KIT<br />
53931-03 Rear, for Rack<br />
CLASSIC CHROME HEADLAMP VISOR<br />
67750-88T<br />
CLASSIC CHROME PASSING LAMP VISORS<br />
67783-78T<br />
PASSING LAMP TRIM RINGS<br />
68775-93T<br />
CLEAR TURN SIGNAL LENSES<br />
69303-02 Bullet Style<br />
HERITAGE SPRINGER FRONT FENDER TIP<br />
59218-97<br />
CLASSIC CHROME BRAKE ROTOR<br />
44821-00 Front<br />
44822-00 Rear<br />
BULLSEYE CALIPER INSERT<br />
44099-99<br />
CLASSIC TEARDROP MIRRORS<br />
91971-98 (pair)<br />
NOSTALGIC HAND GRIPS<br />
56275-96A<br />
CHROME HAND CONTROL LEVER KIT<br />
45075-96<br />
CHROME SWITCH HOUSING KIT<br />
70222-96<br />
CHROME FRONT MASTER CYLINDER COVER<br />
45078-96A<br />
CHROME CLUTCH BRACKET AND MASTER<br />
CYLINDER RESERVOIR KIT<br />
45284-99<br />
HERITAGE SPRINGER LEATHER<br />
TANK PANEL WITH POUCH<br />
61770-00<br />
FINNED HEADBOLT BRIDGE<br />
43859-00 Black<br />
RIDER FOOTBOARD ASSEMBLY— OLD STYLE<br />
50599-89T (2 sets)<br />
POLISHED STAINLESS STEEL<br />
SHIFT LINKAGE<br />
33814-98A Round<br />
NOSTALGIC SHIFTER PEGS<br />
34627-99 (2)<br />
NOSTALGIC BRAKE PEDAL PAD<br />
44248-96<br />
HERITAGE SPRINGER RIDER BACKREST PAD<br />
52826-97 Low<br />
2003 flstsi Select Custom Paint, 30’s Style Olive and Black<br />
SOFTAIL FRAME TRIM SET<br />
47300-88T<br />
BLACK SOFTAIL SWINGARM AXLE COVERS<br />
47615-95B<br />
CHROME SPROCKET COVER<br />
91347-00<br />
HERITAGE SPRINGER FENDER TIP<br />
59895-97 Rear<br />
PROFILE LOW SUSPENSION<br />
54648-00 Rear<br />
HERITAGE SPRINGER SOLO RACK<br />
53903-00<br />
217
218 219<br />
The <strong>Softail</strong> family’s combination of<br />
timeless styling and uncompromising,<br />
road-readydesign has no equal on<br />
the tarmac. Despite their “custom-out-ofthe-crate”<br />
appearance, the <strong>Softail</strong>s are built<br />
with personalisation in mind. And Genuine<br />
Motor Parts and Accessories deliver options<br />
designed to enhance your <strong>Softail</strong>’s look and<br />
feel at every turn. Drop down with Profile<br />
Low Suspension for laid-back, custom swagger,<br />
and then keep the lines long and low with<br />
the sculpted curves and custom-stitched patterns<br />
of our Exotic Seat Collection. Continue<br />
with exclusive <strong>Softail</strong> accessories like our<br />
Chrome-Plated Swingarm, built to Original<br />
Equipment specifications for unparalleled<br />
fitment and function with a brilliant finish.<br />
Slip on a detachable windshield so you can<br />
reduce fatigue on long-distance runs without<br />
Chrome-Plated Swingarm for <strong>Softail</strong> Models<br />
48442-00, page 296<br />
having to sacrifice your custom profile<br />
for trips around town. Or give a<br />
nod to the past with a Chrome<br />
Passing Lamp Kit, and then add the<br />
final detail with a matching Chrome<br />
Headlamp Nacelle. With Genuine<br />
Motor Parts and Accessories, custom<br />
<strong>Softail</strong> looks are just moments away.<br />
Profile Low Rear Suspension<br />
54648-00a, page 327<br />
Instant<br />
Classic<br />
Two-Up Custom Stitched Seat<br />
with Ostrich Insert<br />
53207-02, page 233<br />
1<br />
2<br />
3<br />
Detachable King-Size Windshield<br />
for FL <strong>Softail</strong> Models<br />
Standard-Height, Smoked 57733-00, page 222<br />
Low-Profile, Smoked 57734-00, page 222<br />
Chrome Fork Cover Kit<br />
67890-91a, page 294<br />
Lighting Trim Rings<br />
Headlamp 69626-99, page 230<br />
Passing Lamp 69622-99a, page 230<br />
Turn Signal 69740-01, page 230<br />
1<br />
2<br />
3
220<br />
<strong>Softail</strong><br />
Windshields<br />
A. DETACHABLE SUPER SPORT WINDSHIELD<br />
FOR SOFTAIL DEUCE MODELS<br />
Add to the ground-breaking style of the Deuce, while<br />
also protecting yourself from some of the elements.<br />
This windshield features a Super Sport shape and<br />
high-quality lightly smoked Lexan, along with polished<br />
stainless steel mounting brackets that offer detachable<br />
convenience. Patented.<br />
57837-00A Fits ’00-later FXSTD models<br />
(except FXSTDSE). Installation<br />
requires the separate purchase<br />
of Docking Hardware Kit<br />
P/N 58397-00. $234.95<br />
B. DETACHABLE COMPACT<br />
STANDARD-HEIGHT WINDSHIELD<br />
FOR SOFTAIL DEUCE MODELS<br />
These windshields, designed specifically for the<br />
Deuce, feature partially hidden mounting brackets, a<br />
unique U-shaped support and an engraved Bar &<br />
Shield emblem for a clean look. Patented.<br />
57090-00A Clear.<br />
Fits ’00-later FXSTD models<br />
(except FXSTDSE). Requires<br />
separate purchase of Docking<br />
Hardware Kit P/N 58397-00. $309.95<br />
C. DETACHABLE COMPACT<br />
LOW-PROFILE WINDSHIELD<br />
FOR SOFTAIL DEUCE MODELS<br />
Detachable compact low-profile lightly smoked Lexan<br />
windshield. Mounting brackets designed to enhance<br />
clean style of the Deuce. Patented.<br />
57824-00A Lightly Smoked.<br />
Fits ’00-later FXSTD models<br />
(except FXSTDSE). Requires<br />
separate purchase of Docking<br />
Hardware Kit P/N 58397-00. $299.95<br />
SOFTAIL DEUCE DETACHABLE<br />
WINDSHIELD DOCKING HARDWARE<br />
(not shown) (Patented)<br />
58397-00 Required for installation<br />
of detachable windshields<br />
on ’00-later FXSTD models<br />
(except FXSTDSE). $69.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS<br />
B. DETACHABLE COMPACT<br />
STANDARD-HEIGHT WINDSHIELD<br />
FOR SOFTAIL DEUCE MODELS<br />
C. DETACHABLE COMPACT<br />
LOW-PROFILE WINDSHIELD<br />
FOR SOFTAIL DEUCE MODELS
D. DETACHABLE SUPER SPORT WINDSHIELD FOR<br />
SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS<br />
E. SPORT WINDSHIELD KIT<br />
FOR SOFTAIL CUSTOM AND<br />
DYNA WIDE GLIDE MODELS<br />
F. COMPACT WINDSHIELD KIT<br />
FOR SOFTAIL CUSTOM MODELS<br />
221<br />
<strong>Softail</strong><br />
Windshields<br />
D. DETACHABLE SUPER SPORT<br />
WINDSHIELD FOR SOFTAIL CUSTOM<br />
AND DYNA WIDE GLIDE MODELS<br />
Super is an apt description for this do-it-all shield.<br />
Detachable convenience. <strong>Harley</strong>-Davidson sport<br />
styling. High-quality, lightly smoked Lexan that<br />
shields you from the elements. Patented.<br />
57965-97A Fits ’84-later FXST, FXSTC,<br />
FXSTB, ’93-later FXDWG, ’80-’86<br />
FXWG. (Does not fit FXSTD.)<br />
Use Docking Hardware Kit<br />
P/N 58350-96. $204.95<br />
DOCKING HARDWARE<br />
FOR DETACHABLE WINDSHIELDS (Patented)<br />
For 41mm Forks.<br />
58350-96 Required for installation<br />
of Detachable Windshields<br />
P/Ns 58340-96, 58341-96,<br />
57965-97A, 58627-99. $69.95<br />
E. SPORT WINDSHIELD KIT FOR SOFTAIL<br />
CUSTOM AND DYNA WIDE GLIDE MODELS<br />
Formed of Lexan polycarbonate and hard-coated to<br />
resist scratching. Lightly smoked with Bar & Shield<br />
Winged logo. Contoured to fit headlamp and incorporates<br />
adjustable four-point mounting. Functional styling<br />
helps deflect wind to reduce upper body fatigue.<br />
91820-85A Fits ’84-later FXST, FXSTB,<br />
FXSTC, and ’93-later FXDWG<br />
and ’86-earlier FXWG models. $149.95<br />
F. COMPACT WINDSHIELD KIT<br />
FOR SOFTAIL CUSTOM MODELS<br />
Formed of tough Lexan polycarbonate and hard-coated<br />
to resist scratching. Unique mounting system utilizes<br />
die-cast fork slider clamps which are designed<br />
for height adjustment and are hand-polished and<br />
chrome-plated. Chrome windshield cross braces offer<br />
traditional <strong>Harley</strong>-Davidson styling. Mounts easily, can<br />
be quickly removed.<br />
58025-91B Fits ’84-later FXST, FXSTC,<br />
FXSTB and ’86-earlier FXWG models.<br />
(Does not fit FXDWG and FXSTD<br />
models.) Will not fit with Chrome<br />
Billet Mini Tach Mount<br />
P/N 68960-98. $284.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
222<br />
<strong>Softail</strong><br />
Windshields<br />
DETACHABLE COMPACT<br />
WINDSHIELD FOR SOFTAIL CUSTOM<br />
AND DYNA WIDE GLIDE MODELS<br />
Get the convenience of detachables and the look of<br />
lightly smoked Lexan in one easy-to-install windshield.<br />
This windshield is formed from a hard-coated<br />
polycarbonate that resists scratching and abrasion.<br />
Because it is designed to work with detachable docking<br />
hardware, this windshield comes on or off in less<br />
than 60 seconds without tools. Patented.<br />
A. Standard-Height, Lightly Smoked<br />
58627-99 Fits ’84-later FXST, FXSTB,<br />
FXSTC and ’93-later FXDWG.<br />
Requires installation of Docking<br />
Hardware Kit P/N 58350-96. Will<br />
not fit with Chrome Billet Mini<br />
Tach Mount P/N 68960-98. $299.95<br />
B. Standard-Height, Clear<br />
58340-96 Fits ’84-later FXST, FXSTC,<br />
FXSTB, and ’93-later FXDWG,<br />
’80-’86 FXWG. (Does not fit FXSTD.)<br />
Requires separate purchase of<br />
Windshield Docking Hardware Kit<br />
P/N 58350-96. Will not fit with<br />
Chrome Billet Mini Tach Mount<br />
P/N 68960-98. $279.95<br />
C. Low-Profile, Lightly Smoked<br />
58341-96 Fits ’84-later FXST, FXSTC,<br />
FXSTB, and ’93-later FXDWG,<br />
’80-’86 FXWG. (Does not fit FXSTD.)<br />
Requires separate purchase of<br />
Windshield Docking Hardware Kit<br />
P/N 58350-96. Will not fit with<br />
Chrome Billet Mini Tach Mount<br />
P/N 68960-98. $299.95<br />
DOCKING HARDWARE<br />
FOR DETACHABLE WINDSHIELDS (Patented)<br />
For 41mm Forks.<br />
58350-96 Required for installation<br />
of Detachable Windshields<br />
P/Ns 58340-96, 58341-96,<br />
57965-97A, 58627-99. $69.95<br />
SOFTAIL DETACHABLE<br />
KING-SIZE WINDSHIELDS FOR<br />
USE WITH PASSING LAMPS<br />
This one-piece Lexan windshield is formed from hardcoated<br />
polycarbonate material to resist scratching.<br />
The Lexan is attached to highly-polished stainless<br />
steel mounting brackets supported by moulded-rubber<br />
bushings for improved isolation. It is offered in a<br />
standard-height clear or lightly smoked, Lexan or<br />
three-inch lower than stock, low-profile lightly smoked<br />
Lexan. (Chrome Wind Deflector Kit P/N 58125-90A<br />
can be used with this windshield kit on ’99-earlier<br />
models.) Patented.<br />
D. Three-inch, Low-Profile, Lightly Smoked<br />
57734-00 Fits ’00-later FLSTC models.<br />
(Additional mounting hardware<br />
not required.) $334.95<br />
58275-95 Fits ’86-’99 FLSTC and ’90-later<br />
FLSTF, FLSTN models with passing<br />
lamps. Includes mounting hardware.<br />
(Does not fit FLSTS.) $369.95<br />
E. Standard-Height, Clear<br />
58240-95 Fits ’86-’99 FLSTC and ’90-later<br />
FLSTF, FLSTN models with passing<br />
lamps. Includes mounting hardware.<br />
(Stock on ’00 FLSTC.)<br />
(Does not fit FLSTS.) $339.95<br />
Standard-Height, Lightly Smoked (not shown)<br />
57733-00 Fits ’00-later FLSTC models.<br />
(Additional mounting hardware<br />
not required.) $334.95<br />
58628-99 Fits ’86-’99 FLSTC and ’90-later<br />
FLSTF, FLSTN models with passing<br />
lamps. Includes mounting hardware.<br />
(Does not fit FLSTS.) $369.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND<br />
DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, LIGHTLY SMOKED<br />
B. DETACHABLE COMPACT WINDSHIELD FOR<br />
SOFTAIL CUSTOM AND DYNA WIDE GLIDE<br />
MODELS – STANDARD-HEIGHT, CLEAR<br />
C. DETACHABLE COMPACT WINDSHIELD<br />
FOR SOFTAIL CUSTOM AND DYNA<br />
WIDE GLIDE MODELS – LOW-PROFILE,<br />
LIGHTLY SMOKED
D. SOFTAIL DETACHABLE KING-SIZE WINDSHIELD KIT FOR USE WITH<br />
PASSING LAMPS – THREE-INCH, LOW-PROFILE, LIGHTLY SMOKED<br />
E. SOFTAIL DETACHABLE KING-SIZE<br />
WINDSHIELDS FOR USE WITH PASSING<br />
LAMPS – STANDARD-HEIGHT, CLEAR<br />
F. DETACHABLE KING-SIZE WINDSHIELDS<br />
FOR FL SOFTAIL MODELS WITHOUT PASSING<br />
LAMPS – STANDARD-HEIGHT, CLEAR<br />
223<br />
<strong>Softail</strong><br />
Windshields<br />
F. DETACHABLE KING-SIZE<br />
WINDSHIELDS FOR FL SOFTAIL MODELS<br />
WITHOUT PASSING LAMPS<br />
The Lexan windshield is formed from hard-coated<br />
polycarbonate material to resist scratching and abrasion.<br />
Polished stainless steel mounting brackets are<br />
supported by moulded-rubber bushings for improved<br />
isolation. It is offered in a standard-height clear Lexan<br />
or three-inch lower than stock, low-profile lightly<br />
smoked Lexan. Comes complete with all the hardware<br />
required to fit FLSTC, FLSTF and FLSTN models<br />
without passing lamps. (Chrome Wind Deflector Kit<br />
P/N 58125-90A can be used with this windshield kit<br />
on ’99-earlier models. Windshield will not fit with<br />
passing lamps.) Patented.<br />
Standard-Height, Clear<br />
58243-95 Fits ’86-’99 FLSTC, and ’90-later<br />
FLSTF, FLSTN models without passing<br />
lamps. (Does not fit FLSTS.) $339.95<br />
Three-inch, Low-Profile, Lightly Smoked<br />
58278-95 Fits ’86-’99 FLSTC, and ’90-later<br />
FLSTF, FLSTN models without passing<br />
lamps. (Does not fit FLSTS.) $364.95<br />
REPLACEMENT WINDSHIELDS (not shown)<br />
Change the look of your Heritage <strong>Softail</strong> Classic by<br />
replacing your clear windshield with the darker hue of<br />
lightly smoked Lexan, now in standard-height. Use<br />
your existing hardware for a quick and easy change.<br />
Standard-Height, Lightly Smoked<br />
Replacement Lexan<br />
57977-99 Fits ’86-later FLSTC, FLSTF,<br />
FLSTN models equipped<br />
with permanently mounted<br />
King-Size Windshields. $144.95<br />
Standard-Height, Lightly Smoked<br />
Replacement Lexan (not shown)<br />
57975-99 Fits ’86-later FLSTC, FLSTF,<br />
FLSTN models equipped with a<br />
Detachable King-Size Windshield.<br />
(Does not fit FLSTS.) $149.95<br />
Low-Profile, Lightly Smoked<br />
Replacement Lexan<br />
58316-95A Fits ’86-later FLSTC, FLSTF,<br />
FLSTN models equipped with<br />
a permanently mounted<br />
King-Size Windshield.<br />
(Does not fit FLSTS.) $134.95<br />
Low-Profile, Lightly Smoked<br />
Replacement Lexan<br />
(not shown)<br />
58277-95 Fits ’86-later FLSTC, FLSTF,<br />
FLSTN models equipped with a<br />
Detachable King-Size Windshield.<br />
(Does not fit FLSTS.) $144.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
224<br />
<strong>Softail</strong><br />
Windshields<br />
DETACHABLE KING-SIZE<br />
NACELLE WINDSHIELD<br />
Fits <strong>Softail</strong> models equipped with the Street Stalker<br />
Headlamp Nacelle or the Chrome Headlamp Nacelle<br />
Kit. Available for models with and without passing<br />
lamps. Patented.<br />
A. Standard-Height, Clear<br />
58649-97A Fits ’86-later FLSTC, FLSTF and<br />
FLSTN models equipped with<br />
the Chrome Headlamp Nacelle<br />
Kit P/N 67907-96. Fits with<br />
passing lamps.<br />
B. Low-Profile, Lightly Smoked<br />
$359.95<br />
58651-97A Fits ’86-later FLSTC, FLSTF and<br />
FLSTN models equipped with<br />
the Chrome Headlamp Nacelle Kit<br />
P/N 67907-96. Fits with<br />
passing lamps.<br />
C. Standard-Height, Clear<br />
$384.95<br />
58652-97A Fits without passing lamps. $359.95<br />
Low-Profile, Lightly Smoked (not shown)<br />
58653-97A Fits without passing lamps. $384.95<br />
REPLACEMENT WINDSHIELDS (not shown)<br />
Standard-Height, Clear Replacement Lexan<br />
58657-97A Fits ’86-later FLSTC, FLSTF<br />
and FLSTN models equipped<br />
with the Chrome Headlamp<br />
Nacelle Kit P/N 67907-96. $134.95<br />
Low-Profile, Lightly Smoked<br />
Replacement Lexan<br />
58658-97A Fits ’86-later FLSTC, FLSTF<br />
and FLSTN models equipped<br />
with the Chrome Headlamp<br />
Nacelle Kit P/N 67907-96. $144.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. DETACHABLE KING-SIZE NACELLE WINDSHIELD – STANDARD-HEIGHT, CLEAR<br />
B. DETACHABLE KING-SIZE<br />
NACELLE WINDSHIELD –<br />
LOW-PROFILE, LIGHTLY SMOKED<br />
C. DETACHABLE KING-SIZE<br />
NACELLE WINDSHIELD –<br />
STANDARD-HEIGHT, CLEAR
Upper Position<br />
Lower Position<br />
D. ADJUSTABLE HEIGHT WINDSHIELD FOR FL SOFTAIL MODELS<br />
E. KING-SIZE RIGID MOUNT WINDSHIELDS –<br />
LOW-PROFILE, LIGHTLY SMOKED<br />
NEW<br />
F. KING-SIZE RIGID MOUNT WINDSHIELDS –<br />
STANDARD-HEIGHT, CLEAR<br />
225<br />
<strong>Softail</strong><br />
Windshields<br />
D. ADJUSTABLE HEIGHT<br />
WINDSHIELD FOR FL SOFTAIL MODELS<br />
This two-piece detachable windshield allows you to<br />
tailor the screen height for maximum riding comfort.<br />
The simple cam-lever adjustment permits the clear<br />
upper section to be raised from 17" to 20" (measured<br />
from the headlamp cut-out) to provide maximum<br />
weather protection and visability. The dark-tinted lower<br />
section conceals the adjustment feature, and small<br />
raised dots provide vibration isolation. Patent pending.<br />
57704-02 Fits ’00-later FLSTC models.<br />
Mounts using Original Equipment<br />
windshield docking hardware. $419.95<br />
57703-02 Fits ’86-’99 FLSTC, ’90-later FLSTF<br />
and FLSTN models equipped with<br />
passing lamps. Includes required<br />
docking hardware. $454.95<br />
KING-SIZE WINDSHIELDS – RIGID MOUNT<br />
The Lexan windshield is formed from hard-coated,<br />
lightly smoked polycarbonate material to resist<br />
scratching and abrasion. The windshield comes with<br />
mounting brackets that are adjustable for various<br />
height settings and is a direct replacement for FLSTC<br />
models. This windshield can also be installed on<br />
FLSTF and FLSTN models with the addition of mounting<br />
bracket kit P/N 58155-90.<br />
E. Low-Profile, Lightly Smoked<br />
58319-95A Fits ’86-’99 FLSTC, and ’90-later<br />
FLSTF, FLSTN models (FLSTF<br />
and FLSTN require mounting<br />
bracket kit P/N 58155-90).<br />
(Does not fit FLSTS.) $289.95<br />
F. Standard-Height, Clear<br />
58018-86A Fits ’86-’99 FLSTC, and ’90-later<br />
FLSTF, FLSTN models (FLSTF<br />
and FLSTN require mounting<br />
bracket kit P/N 58155-90).<br />
(Does not fit FLSTS.) $259.95<br />
FLSTF/FLSTN Windshield Bracket Kit<br />
(not shown)<br />
Includes brackets, chrome acorn lock nuts, and installation<br />
instructions.<br />
58155-90 Required to install King-Size<br />
Lexan Windshield Kit P/N<br />
58018-86 on ’90-later FLSTF<br />
and FLSTN models. $13.95<br />
RIGID-MOUNTED REPLACEMENT LEXAN<br />
Standard-Height, Clear<br />
58516-97 Fit ’86-later FLSTF, FLSTN and<br />
’86-’99 FLSTC models equipped<br />
with the Chrome Headlamp<br />
Nacelle Kit P/N 67907-96. $134.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
226<br />
<strong>Softail</strong><br />
Windshields<br />
A. DETACHABLE SUPER SPORT WINDSHIELD<br />
FOR FX SPRINGER SOFTAIL MODELS<br />
Super is an apt description for this do-it-all shield.<br />
Detachable convenience. <strong>Harley</strong>-Davidson sport<br />
styling. High-quality, lightly smoked Lexan that shields<br />
you from the elements. Patented.<br />
57969-97A Fits ’93-later FXSTS, FXSTSB<br />
models. Use Docking Hardware<br />
Kit P/N 58907-96. Will not fit<br />
with Chrome Billet Mini Tach<br />
Mount P/N 67848-00. $204.95<br />
B. COTTON WINDSHIELD STORAGE BAG<br />
This bag is constructed of breathable cotton material<br />
and is flannel-lined for a scratch-free storage area.<br />
The outside of the bag features an embroidered Bar &<br />
Shield logo to match the cotton cycle covers.<br />
95982-98 Fits all <strong>Harley</strong>-Davidson<br />
windshields. $64.95<br />
C. SPRINGER SPORT WINDSHIELD KIT<br />
Formed of Lexan polycarbonate and hard-coated to<br />
resist scratches. Lightly smoked with Bar & Shield<br />
Winged logo and contoured to complement the Springer<br />
front fork styling. Four-point adjustable mounting system.<br />
Designed to fit with or without Springer Passing Lamp Kit<br />
P/N 68253-88A and Springer Horn Kit P/N 69036-88A.<br />
58029-89B Fits ’88-later FXSTS models and<br />
<strong>Softail</strong> models equipped with Springer<br />
Front End Kit P/N 46007-88A.<br />
(Does not fit FLSTS models.) $149.95<br />
DOCKING HARDWARE FOR<br />
DETACHABLE WINDSHIELDS<br />
(not shown) (Patented)<br />
58907-96 Required for installation of<br />
Detachable Windshields on<br />
’93-later FXSTS, FXSTSB<br />
and ’97-later FLSTS models. $69.95<br />
58350-96 Required for installation<br />
of Detachable Windshields<br />
P/Ns 58340-96, 58341-96,<br />
57965-97A, 58627-99. $69.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS<br />
B. COTTON WINDSHIELD STORAGE BAG<br />
C. SPRINGER SPORT WINDSHIELD KIT
D. COMPACT DETACHABLE WINDSHIELD FOR SPRINGER<br />
SOFTAIL MODELS – STANDARD-HEIGHT, CLEAR<br />
E. COMPACT DETACHABLE WINDSHIELD<br />
FOR SPRINGER SOFTAIL MODELS –<br />
LOW-PROFILE, LIGHTLY SMOKED<br />
F. COMPACT WINDSHIELD KIT FOR<br />
SPRINGER SOFTAIL MODELS<br />
227<br />
<strong>Softail</strong><br />
Windshields<br />
COMPACT DETACHABLE WINDSHIELD<br />
FOR SPRINGER SOFTAIL MODELS (Patented)<br />
D. Standard-Height, Clear<br />
58770-96 Fits ’93-later FXSTS and FXSTSB;<br />
’97-later FLSTS models. Installation<br />
requires the separate purchase of<br />
Windshield Docking Hardware Kit<br />
P/N 58907-96. (Will fit with or<br />
without passing lamps.) Will not<br />
fit with Chrome Billet Mini Tach<br />
Mount P/N 67848-00. $294.95<br />
E. Low-Profile, Lightly Smoked<br />
58771-96 Fits ’93-later FXSTS and FXSTSB;<br />
’97-later FLSTS models. Installation<br />
requires the separate purchase of<br />
Windshield Docking Hardware Kit<br />
P/N 58907-96. (Will fit with or<br />
without passing lamps.) Will not<br />
fit with Chrome Billet Mini Tach<br />
Mount P/N 67848-00. $319.95<br />
F. COMPACT WINDSHIELD KIT FOR<br />
SPRINGER SOFTAIL MODELS<br />
Formed of Lexan polycarbonate and hard-coated to<br />
resist scratches. Features chrome mounting brackets.<br />
Adjustable to various height settings. Designed to fit<br />
with or without Springer Passing Lamp Kit P/N 68253-<br />
88A and Springer Horn Kit P/N 69036-88A.<br />
58044-88C Fits ’88-later FXSTS models.<br />
Also fits <strong>Softail</strong> models equipped with<br />
Springer Front End Kit P/N 46007-88A.<br />
(Does not fit FLSTS models.) $294.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
228<br />
<strong>Softail</strong><br />
Windshields<br />
HERITAGE SPRINGER KING-SIZE<br />
DETACHABLE WINDSHIELD (Patented)<br />
A. Standard-Height, Clear<br />
58772-97 Fits ’97-later FLSTS models.<br />
Installation requires the separate<br />
purchase of Windshield Docking<br />
Hardware Kit P/N 58907-96. Will<br />
not fit with Chrome Billet Mini<br />
Tach Mount P/N 67848-00. $299.95<br />
B. Low-Profile, Lightly Smoked<br />
58783-97 Fits ’97-later FLSTS models.<br />
Installation requires separate<br />
purchase of Windshield Docking<br />
Hardware Kit P/N 58907-96. Will<br />
not fit with Chrome Billet Mini<br />
Tach Mount P/N 67848-00. $324.95<br />
C. HERITAGE SPRINGER<br />
KING-SIZE WINDSHIELDS<br />
This one-piece, classic King-Size windshield completes<br />
the nostalgic look. Includes chrome-plated<br />
steel mounting brackets.<br />
Standard-Height, Clear<br />
58533-97A Fits ’97-later FLSTS<br />
Heritage Springer.<br />
Low-Profile, Lightly Smoked<br />
$299.95<br />
58534-97A Fits ’97-later FLSTS<br />
Heritage Springer. $324.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE SPRINGER KING-SIZE DETACHABLE WINDSHIELD – STANDARD-HEIGHT, CLEAR<br />
B. HERITAGE SPRINGER KING-SIZE<br />
DETACHABLE WINDSHIELD –<br />
LOW-PROFILE, LIGHTLY SMOKED<br />
C. HERITAGE SPRINGER<br />
KING-SIZE WINDSHIELDS –<br />
STANDARD-HEIGHT, CLEAR
D. COLOUR-MATCHED HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)<br />
NEW<br />
D. COLOUR-MATCHED HEADLAMP<br />
VISOR KITS (DYNA WIDE GLIDE/<br />
SOFTAIL CUSTOM)<br />
NEW<br />
229<br />
<strong>Softail</strong><br />
Headlamp Visor Kits<br />
D. COLOUR-MATCHED<br />
HEADLAMP VISOR KITS (DYNA WIDE<br />
GLIDE/SOFTAIL CUSTOM)*<br />
Add an element of racy style to stock headlamps with<br />
these visors, available in prime or high-quality, colourmatched<br />
<strong>Harley</strong>-Davidson paint.<br />
Fits ’84-’99 FXST, FXSTC and ’91-later FXDWG.<br />
*NOTE: This product is a “paint to order” accessory.<br />
Please allow an average of 5 weeks delivery for<br />
this item.<br />
Refer to the Colour Shop section for<br />
a complete listing of colour options.<br />
E. CHROME HEADLAMP VISOR KIT<br />
Add an element of racy style to stock headlamps<br />
with these visors. Kit includes necessary mounting<br />
hardware.<br />
69728-01 Fits ’91-later FXDWG models<br />
and ’84-’99 FXST and FXSTC<br />
models (except FXSTB). $174.95<br />
E. CHROME HEADLAMP VISOR KIT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
230<br />
<strong>Softail</strong><br />
Trim Rings<br />
A. HEADLAMP TRIM RINGS<br />
This chrome-plated headlamp trim ring extends<br />
forward, giving the headlamp assembly a “Frenched”<br />
look reminiscent of classic hot rod car designs by<br />
recessing the headlamp and adding the appearance<br />
of depth. Functions as a direct replacement for the<br />
Original Equipment trim ring, except when used with<br />
P/N 69627-99, where it easily installs over the Original<br />
Equipment trim ring. Patented. (Does not fit with<br />
Accessory Headlamp Visor or Passing Lamp Visor.)<br />
69627-99 Fits ’83-later Touring models<br />
(except Tour Glide and Road<br />
Glide). Fits ’94-later FLHR models<br />
and ’86-later FLST models with<br />
accessory Chrome Headlight<br />
Nacelle P/N 67907-96. $32.95<br />
69626-99 Fits ’94-later FLSTC, FLSTF and<br />
FLSTN models. (not shown) $32.95<br />
69623-99A Fits ’94-later FXST, FXSTB, FXSTC,<br />
FXLR and Dyna models. $28.95<br />
69624-99A Fits ’93-later FXSTS, ’95-’97<br />
FXSTSB, ’96-later XL 1200C, XL<br />
883C, ’99 FXR models and<br />
’97-later FLSTS models.<br />
Also fits FXSTD models. $28.95<br />
PASSING LAMP TRIM RINGS<br />
A must-have complement to the Headlamp Trim Ring,<br />
these chrome-plated passing lamp trim rings provide<br />
the same “Frenched” look for passing lamps. Function<br />
as a direct replacement for the Original Equipment trim<br />
rings. Includes chrome hardware. Sold in pairs.<br />
Patented.<br />
69622-99A Fits all ’62-later models with passing<br />
lamps. Fits accessory Passing<br />
Lamps Kit P/N 68250-80. (pair) $39.95<br />
TURN SIGNAL TRIM RING KIT<br />
Complete the “Frenched” look with these Turn Signal<br />
Trim Rings. The chrome-plated trim rings match the<br />
styling of Headlamp and Passing Lamp Trim Rings<br />
69622-99A, 69626-99, and 69627-99. Easy to install,<br />
the kit includes two trim rings.<br />
69740-01 Fits front or rear of ’88-later<br />
Touring and Heritage <strong>Softail</strong> Classic<br />
models, and <strong>Softail</strong> models equipped<br />
with Turn Signal Relocation Kit<br />
P/N 68413-99 or 68412-99. $35.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
Before<br />
A. HEADLAMP, PASSING LAMP AND TURN SIGNAL TRIM RINGS – ROAD KING AND FL SOFTAIL<br />
FXSTC BEFORE HEADLAMP TRIM RING<br />
After<br />
Before After<br />
FXSTC AFTER HEADLAMP TRIM RING
FLSTS AFTER HEADLAMP TRIM RING AND PASSING LAMP TRIM RINGS<br />
B. BULLET TURN SIGNAL<br />
TRIM RING KIT – AMBER<br />
Before<br />
After<br />
231<br />
<strong>Softail</strong><br />
Trim Rings<br />
BULLET TURN SIGNAL TRIM RING KIT<br />
Trim ring contour matches the turn signal housing and<br />
extends out past the lens for a sleek appearance.<br />
These easy-to-install chrome-plated trim rings with<br />
amber or red lenses look great alone, or in combination<br />
with Headlamp Trim Rings. Sold in pairs. From the<br />
workshop of Wyatt Fuller.<br />
B. Amber<br />
69739-01 Fits all models equipped with<br />
bullet style turn signals (except VRSC<br />
rear signals and rear of models with<br />
Auxiliary Turn Signal Brake Light Kits<br />
P/N 68216-00 and 91698-02). $29.95<br />
C. Red<br />
69736-02 Fits rear of all models (except<br />
VRSC and International models)<br />
equipped with bullet style turn<br />
signals and Auxiliary Brake light Kit<br />
P/N 68216-00 or 91698-02.<br />
Not for International use. $29.95<br />
C. BULLET TURN SIGNAL TRIM RING KIT – RED Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
Rider Pattern<br />
Axe Pattern<br />
exotic Seats<br />
Scorpion Pattern<br />
Axe II Pattern<br />
The very latest from the <strong>Harley</strong>-Davidson<br />
Exotic Seat Collection, these limited<br />
production Custom Stitched saddles combine<br />
superior construction with radical styling to<br />
give you the ultimate custom accessory.<br />
With contoured foam padding for added longhaul<br />
comfort, each seat is made from top grain<br />
Turbulence Pattern<br />
Sweep Pattern<br />
leathers for superior wear and attitude with<br />
age. Decorative custom-stitching and available<br />
ostrich leather inserts leave no doubt about your<br />
attention to custom detail. Seat pans are<br />
constructed from hand-laid fibreglass for extra<br />
durability, and carpeted to protect your paint<br />
finish. When it’s time to flex your custom<br />
muscles, the <strong>Harley</strong>-Davidson Exotic Seat<br />
Collection has the style you’re after.<br />
Menace Pattern<br />
Icarus Pattern<br />
with Ostrich<br />
Fire Pattern<br />
with Ostrich<br />
Scimitar Pattern
A. SOLO OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN<br />
B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN<br />
233<br />
<strong>Softail</strong><br />
Ostrich Seats<br />
A. SOLO OSTRICH SEAT<br />
FOR SOFTAIL MODELS<br />
Ride low-down in high style on this limited-production<br />
custom solo seat. Made from the highest quality<br />
materials, this custom stitched seat features a natural<br />
ostrich skin insert, cowhide seating surface, and<br />
contoured foam padding for long-haul comfort. Seat<br />
has no visible mounting hardware for a clean custom<br />
look. Seat width: 12".<br />
Ostrich Seat – Fire Pattern<br />
51252-02 Fits ’00-later FXSTD<br />
models (shown). $469.00<br />
51260-02 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD and FLSTS).<br />
Ostrich Seat – Icarus Pattern<br />
$469.00<br />
53262-02 Fits ’00-later <strong>Softail</strong> models (except<br />
FXSTD and FLSTS models). $469.00<br />
52082-02 Fits ’00-later FXSTD models. $469.00<br />
B. LOW-PROFILE OSTRICH SEAT<br />
FOR SOFTAIL MODELS*<br />
The ultimate seat profile for your slammed ride, this<br />
low-profile limited-production seat hugs the frame<br />
and fender for a long and lean look. Crafted from<br />
premium cowhide and natural ostrich leathers, this<br />
premiere seat is constructed with a hand-laid fiberglass<br />
shell and high density padding for superior wear.<br />
Seat width: 13". Pillion width: 5".<br />
Ostrich Seat – Fire Pattern<br />
51251-02 Fits ’00-later FXSTD<br />
models. Does not fit with<br />
Sissy Bar Upright<br />
P/N 51114-00 or 51144-02. $499.00<br />
51259-02 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD<br />
and FLSTS) (shown). $499.00<br />
Ostrich Seat – Icarus Pattern<br />
53253-02 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD<br />
and FLSTS models). $499.00<br />
52074-02 Fits ’00-later FXSTD<br />
models (Does not fit with<br />
Sissy Bar Upright P/Ns<br />
51114-00 and 51144-02). $499.00<br />
C. TWO-UP OSTRICH SEAT<br />
FOR SOFTAIL MODELS*<br />
The two-up profile of this limited-production custom<br />
seat maintains a lean look, but adds back support for<br />
the rider, and additional padding for the passenger.<br />
Made of the highest quality cowhide, and featuring a<br />
one-of-a-kind genuine ostrich insert, this premium<br />
seat offers a radical style with a touch of comfort. Seat<br />
width: 13". Pillion width: 6".<br />
Ostrich Seat – Fire Pattern<br />
51250-02 Fits ’00-later FXSTD models. $499.00<br />
51258-02 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD<br />
and FLSTS) (shown). $499.00<br />
Ostrich Seat – Icarus Pattern<br />
53207-02 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD<br />
and FLSTS models). $499.00<br />
52049-02 Fits ’00-later FXSTD models. $499.00<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap part<br />
number if not included in seat kit.<br />
NOTE: These seats are “made to order” please allow<br />
1 – 2 weeks for delivery.<br />
C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS – FIRE PATTERN Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
NEW<br />
NEW
234<br />
<strong>Softail</strong><br />
Exotic Seats<br />
A. SOFTAIL TWO-UP EXOTIC<br />
OSTRICH SEAT WITH CUSTOM PILLION<br />
Combine the long and lean styling of our low-profile<br />
exotic seat with the back support of the two-up seat,<br />
and you get the best of both worlds. These cowhide<br />
saddles feature ostrich inserts, custom-stitched surfaces<br />
and a tapered pillion for style, and a rider position<br />
designed for comfort. Seat width: 13”. Pillion width: 5”.<br />
Icarus Pattern<br />
53534-02 Fits ’00-later <strong>Softail</strong> models (except<br />
FXSTD and FLSTS models). $499.00<br />
B. COLOUR-MATCHED TAIL SECTION<br />
FOR SOFTAIL DEUCE MODELS<br />
Add a splash of colour behind your Deuce model’s<br />
Solo Seat while hiding the rear fender’s Sissy Bar<br />
Upright mounting holes with these exclusive colourmatched<br />
Tail Sections.<br />
Fits ’00-later FXSTD models equipped with any GMA<br />
Solo Seat for FXSTD models.<br />
Refer to page 249 for a<br />
complete listing of colour options.<br />
C. SOLO CUSTOM STITCHED SEAT<br />
FOR SOFTAIL MODELS<br />
When it’s time to go it alone, go solo in style. These<br />
premium quality cowhide leather saddles are highlighted<br />
with custom stitched patterns to create a subtle<br />
and distinctive look, and feature “invisible” mounting<br />
hardware for a clean appearance. Seat width: 12".<br />
Deuce<br />
Fits ’00-later FXSTD models.<br />
51060-02 Axe Pattern. $349.00<br />
51061-02 Rider Pattern. $349.00<br />
51062-02 Scorpion Pattern. $349.00<br />
51063-02 Sweep Pattern. $349.00<br />
52078-02 Axe II Pattern. $349.00<br />
52079-02 Turbulence Pattern. $349.00<br />
52080-02 Menace Pattern. $349.00<br />
52081-02 Scimitar Pattern. $349.00<br />
53292-02<br />
<strong>Softail</strong><br />
Plain. $319.00<br />
Fits ’00-later <strong>Softail</strong> models (except FXSTD and FLSTS).<br />
51076-02 Axe Pattern. $349.00<br />
51077-02 Rider Pattern. $349.00<br />
51078-02 Scorpion Pattern. $349.00<br />
51079-02 Sweep Pattern. $349.00<br />
53254-02 Axe II Pattern. $349.00<br />
53256-02 Turbulence Pattern. $349.00<br />
53257-02 Menace Pattern. $349.00<br />
53259-02 Scimitar Pattern. $349.00<br />
53359-02 Plain. $319.00<br />
D. LOW-PROFILE CUSTOM STITCHED<br />
SEATS FOR SOFTAIL MODELS*<br />
Another extraordinary installment from the Exotic Seat<br />
Collection, these leather Low-Profile saddles feature<br />
custom stitched patterns and smooth lines to create a<br />
subtle and distinctive custom effect. Or go with a<br />
smooth cover for that simple custom look. Seat width:<br />
13". Pillion width: 5".<br />
Deuce<br />
Fits ’00-later FXSTD models. Does not fit with Sissy<br />
Bar Upright P/N 51114-00 or 51144-02.<br />
52365-02 Axe Pattern. $369.00<br />
52368-02 Sweep Pattern. $369.00<br />
52366-02 Rider Pattern. $369.00<br />
52367-02 Scorpion Pattern. $369.00<br />
52055-02 Axe II Pattern. $369.00<br />
52056-02 Turbulence Pattern. $369.00<br />
52057-02 Menace Pattern. $369.00<br />
52058-02 Scimitar Pattern. $369.00<br />
53289-02 Plain. $339.00<br />
(continued at top of next page)<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap part<br />
number if not included in seat kit.<br />
NEW<br />
A. SOFTAIL TWO-UP EXOTIC OSTRICH SEAT WITH CUSTOM PILLION – ICARUS PATTERN<br />
B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS<br />
NEW<br />
C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – SCIMITAR PATTERN
D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS – PLAIN<br />
E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – AXE PATTERN<br />
NEW<br />
NEW<br />
NEW<br />
F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS – SWEEP PATTERN<br />
235<br />
<strong>Softail</strong><br />
Custom Stitched Seats<br />
(continued from bottom of previous page)<br />
<strong>Softail</strong><br />
Fits ’00-later <strong>Softail</strong> models (except FXSTD and FLSTS).<br />
52423-02 Axe Pattern. $369.00<br />
52458-02 Sweep Pattern. $369.00<br />
52436-02 Rider Pattern. $369.00<br />
52457-02 Scorpion Pattern. $369.00<br />
53208-02 Axe II Pattern. $369.00<br />
53224-02 Turbulence Pattern. $369.00<br />
53226-02 Menace Pattern. $369.00<br />
53227-02 Scimitar Pattern. $369.00<br />
53367-02 Plain. $339.00<br />
E. TWO-UP CUSTOM STITCHED<br />
SEAT FOR SOFTAIL MODELS*<br />
Share your custom ride. The two-up design of these<br />
premium cowhide leather seats offers a frame<br />
hugging look, but adds back support for the rider, and<br />
additional padding for the passenger. The custom<br />
stitched design on the seating surface, and the<br />
hand-laid fiberglass seat base show attention to detail<br />
second to none. Or go with a smooth cover for that<br />
simple custom look. Seat width: 13". Pillion width: 6".<br />
Deuce<br />
Fits ’00-later FXSTD models.<br />
51064-02 Axe Pattern. $369.00<br />
51065-02 Rider Pattern. $369.00<br />
51066-02 Scorpion Pattern. $369.00<br />
51067-02 Sweep Pattern. $369.00<br />
52019-02 Axe II Pattern. $369.00<br />
52021-02 Turbulence Pattern. $369.00<br />
52029-02 Menace Pattern. $369.00<br />
52040-02 Scimitar Pattern. $369.00<br />
53288-02<br />
<strong>Softail</strong><br />
Plain. $339.00<br />
Fits ’00-later <strong>Softail</strong> models (except FXSTD and<br />
FLSTS models).<br />
51080-02 Axe Pattern. $369.00<br />
51081-02 Rider Pattern. $369.00<br />
51082-02 Scorpion Pattern. $369.00<br />
51083-02 Sweep Pattern. $369.00<br />
53160-02 Axe II Pattern. $369.00<br />
53161-02 Turbulence Pattern. $369.00<br />
53162-02 Menace Pattern. $369.00<br />
53192-02 Scimitar Pattern. $369.00<br />
53368-02 Plain. $339.00<br />
F. TWO-UP STITCHED SEAT WITH<br />
CUSTOM PILLION FOR SOFTAIL MODELS*<br />
Combine the long and lean styling of our low-profile<br />
exotic seat with the back support of the two-up seat,<br />
and you get the best of both worlds. These cowhide<br />
saddles feature custom stitched surfaces and a sleek<br />
tapered pillion for style, and a rider position designed<br />
for comfort. Or go with a smooth cover for that simple<br />
custom look. Seat width: 13". Pillion width: 5".<br />
<strong>Softail</strong><br />
Fits ’00-later <strong>Softail</strong> models (except FXSTD and FLSTS).<br />
51285-02 Axe Pattern. $369.00<br />
51286-02 Rider Pattern. $369.00<br />
51287-02 Scorpion Pattern. $369.00<br />
51288-02 Sweep Pattern. $369.00<br />
52013-02 Axe II Pattern. $369.00<br />
53390-02 Turbulence Pattern. $369.00<br />
53401-02 Menace Pattern. $369.00<br />
53402-02 Scimitar Pattern. $369.00<br />
53403-02 Plain. $339.00<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap part<br />
number if not included in seat kit.<br />
NOTE: These seats are “made to order” please allow<br />
1 – 2 weeks for delivery.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
236<br />
<strong>Softail</strong><br />
Custom Seats<br />
A. SOFTAIL LEATHER<br />
BADLANDER SEATS*<br />
It’s the traditional Badlander seat style enhanced with<br />
supple top-grain leather. Includes leather care product,<br />
seat, grab strap and mounting hardware. Seat<br />
width 12.0"; Passenger Pillion width 6.5".<br />
52361-00 Fits all ’00-later <strong>Softail</strong><br />
models (except FLSTS<br />
and FXSTD). (shown) $239.95<br />
52361-97 Fits all ’84-’99 <strong>Softail</strong> models<br />
(except FLSTS). (inset) $234.95<br />
NOTE: These <strong>Harley</strong>-Davidson seats are made of<br />
leather. Fine leathers or other natural materials WILL<br />
gain “character,” such as wrinkles or wear, with age.<br />
This is normal. A fine, aged patina and character wrinkles<br />
are a sign of the extremely high quality materials<br />
used to construct your seat or backrest. The appearance<br />
of scars or marks on the leather are a result of<br />
using natural leather panels and should not be<br />
thought of as an imperfection. Please use <strong>Harley</strong>-<br />
Davidson Leather Dressing P/N 98261-91V to protect<br />
your investment.<br />
B. SOFTAIL BADLANDER SEAT*<br />
Clean smooth covers, subtle top-stitching, and two<br />
embroidered “<strong>Harley</strong>-Davidson” logos add up to a<br />
statement only <strong>Harley</strong> could create. The low, lean look<br />
also offers the benefit of a reduced seat height, ideal<br />
for riders wanting the lowest possible seat height.<br />
Includes a passenger grab strap, integrated chrome<br />
rear mounting bracket, seat mounting screw, and<br />
installation instructions. Seat width 11.5"; passenger<br />
pillion width 5.5".<br />
52292-00 Fits all ’00-later <strong>Softail</strong><br />
models (except FLSTS<br />
and FXSTD).(shown) $199.95<br />
52292-94B Fits all ’84-’99 <strong>Softail</strong><br />
models (except FLSTS). $199.95<br />
C. SOFTAIL CUSTOM SEAT*<br />
WITH SNAKESKIN PRINT<br />
Sleek and low style. The Bar & Shield logo adds the<br />
finishing touch! Seat width 11.5", passenger pillion<br />
width 5.0".<br />
51910-00 Fits all ’00-later<br />
<strong>Softail</strong> models (except<br />
FLSTS and FXSTD). $229.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL LEATHER BADLANDER SEAT<br />
B. SOFTAIL BADLANDER SEAT<br />
C. SOFTAIL CUSTOM SEAT WITH SNAKESKIN PRINT
D. LEATHER BADLANDER SEAT FOR SOFTAIL DEUCE<br />
E. BADLANDER SEAT FOR SOFTAIL DEUCE<br />
237<br />
<strong>Softail</strong><br />
Leather Seats<br />
D. LEATHER BADLANDER SEAT*<br />
FOR SOFTAIL DEUCE<br />
Accentuate the sleek lines of your <strong>Softail</strong> Deuce with<br />
the low look of the Badlander Seat. Enhanced with<br />
supple top grain leather and a new embroidered Bar &<br />
Shield logo, this complete package includes leather<br />
care product, seat, and grab strap. Seat width 12.0";<br />
Passenger Pillion width 6.5".<br />
51548-01 Fits ’00-later FXSTD models. $269.95<br />
E. BADLANDER SEAT FOR SOFTAIL DEUCE*<br />
The Badlander has built its reputation as a true street<br />
custom and now it’s available for the Deuce. Clean<br />
smooth covers, subtle top-stitching, and two embroidered<br />
“<strong>Harley</strong>-Davidson” logos add up to a statement<br />
only <strong>Harley</strong>-Davidson could create. The low, lean look<br />
also offers the benefit of a reduced seat height, ideal<br />
for riders wanting the lowest possible ride. Includes all<br />
necessary mounting hardware. Seat width is 12.0";<br />
passenger pillion width is 6.5".<br />
52461-00 Fits ’00-later FXSTD models. $199.95<br />
F. SNAKESKIN SEAT*<br />
FOR SOFTAIL DEUCE MODELS<br />
As if the sleek and low style of this seat didn’t<br />
get you close enough to the ground, the simulated<br />
snakeskin print lets you slither down the street with<br />
even more custom style. Designed for the Deuce, the<br />
seat includes all necessary mounting hardware. Seat<br />
width is 12.0"; passenger pillion width is 7.0".<br />
52463-00 Fits ’00-later FXSTD models. $229.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
F. SNAKESKIN SEAT FOR SOFTAIL DEUCE MODELS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
238<br />
<strong>Softail</strong><br />
Seats with Backrests<br />
SOFTAIL SEATS WITH RIDER BACKRESTS<br />
These seats are the most adjustable of their kind<br />
on the market. A patented design, integrated fuel<br />
spring makes the backrest angle infinitely<br />
adjustable through a 30-degree range with the<br />
touch of a concealed, integrated, yet easy-toreach<br />
lever. The backrest removes easily and has<br />
a push-button-activated, five-position, 1.5" height<br />
adjustment. Rider Backrest folds down to allow<br />
easier passenger mounting. These seats are<br />
designed to match the styling of either the Heritage<br />
<strong>Softail</strong> Classic, Fat Boy, Heritage Springer or FX<br />
<strong>Softail</strong>, and include seat, rider backrest, passenger<br />
grab strap and mounting hardware.<br />
A. HERITAGE SOFTAIL CLASSIC SEAT*<br />
WITH RIDER BACKRESTS<br />
These seats add miles to the ride with added back<br />
support and foam density. Includes chrome spots and<br />
a new concho to match your Heritage <strong>Softail</strong> Classic<br />
bags. Seat width 15.0", passenger pillion width 11.5".<br />
51562-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD).<br />
(Does not fit with Luggage Rack<br />
P/Ns 53465-87B or 53831-00). $559.95<br />
Shown with:<br />
HERITAGE SOFTAIL CLASSIC<br />
BUCKET PASSENGER BACKREST PAD<br />
The bucket backrest pad is taller and wider than the<br />
stock pad. The foam contours to the lower back to<br />
provide added comfort for those long rides. Features<br />
chrome spots and includes all mounting hardware.<br />
52348-97 Fits FLSTC and FXSTC models with<br />
stock Sissy Bar upright and all<br />
other <strong>Softail</strong> models equipped<br />
with Low Sissy Bar Upright. $95.95<br />
B. FAT BOY SEAT*<br />
WITH RIDER BACKREST<br />
These seats add miles to the ride with added back<br />
support and foam density. Fat Boy logo adds the finishing<br />
touch! Seat width 15.0", passenger pillion width<br />
11.5".<br />
51560-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD models).<br />
(Does not fit with Luggage Rack P/Ns<br />
53465-87B or 53831-00.) Matches<br />
Backrest Pad P/N 52347-97 $559.95<br />
Shown with:<br />
FAT BOY BUCKET BACKREST PAD<br />
This bucket backrest pad is taller and wider; the<br />
foam contours to the back for added comfort on<br />
those long hauls.<br />
52347-97 Fits FLSTF models with separate<br />
purchase of Low Sissy Bar Upright.<br />
Also fits FLSTC and FXSTC models<br />
with stock Sissy Bar Uprights. $95.95<br />
Press push-button in the centre of backrest<br />
pad to adjust vertically to five different heights.<br />
BACKREST<br />
HEIGHT<br />
BACKREST<br />
ANGLE<br />
Pull tab on side of seat to adjust angle of backrest<br />
pad 30˚ forward or backward.<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap part<br />
number if not included in seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE SOFTAIL CLASSIC SEAT WITH RIDER BACKREST<br />
B. FAT BOY SEAT WITH RIDER BACKREST
C. HERITAGE SPRINGER SEAT WITH RIDER BACKREST<br />
239<br />
<strong>Softail</strong><br />
Seats with Backrests<br />
C. HERITAGE SPRINGER<br />
SEAT* WITH RIDER BACKREST<br />
These seats add miles to the ride with added back<br />
support and foam density. Seat width 15.0", passenger<br />
pillion width 11.5".<br />
51564-00 With Black Trim.<br />
Fits all ’00-later <strong>Softail</strong> models<br />
(except FXSTD models). (Does<br />
not fit with Luggage Rack<br />
P/Ns 53465-87B or 53831-00). $629.95<br />
Shown with:<br />
HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD<br />
Features large bucket shape, with a generous radius<br />
and ample padding. This backrest pad offers extra<br />
comfort for your passenger.<br />
51132-98 Fits <strong>Softail</strong> models (except<br />
FXSTD) equipped with Low<br />
Sissy Bar Upright. $79.95<br />
D. FX SOFTAIL SEAT*<br />
WITH RIDER BACKREST<br />
These seats with embroidered logo add miles to the ride<br />
with added back support and foam density. Seat width<br />
15.0", passenger pillion width 11.5".<br />
51566-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD).<br />
(Does not fit with Luggage Rack<br />
P/Ns 53465-87B or 53831-00).<br />
Matches Backrest Pad P/N<br />
51132-98 $559.95<br />
Shown with:<br />
HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD<br />
Features large bucket shape, with a generous radius<br />
and ample padding. This backrest pad offers extra<br />
comfort for your passenger.<br />
51132-98 Fits <strong>Softail</strong> models (except<br />
FXSTD) equipped with Low<br />
Sissy Bar Upright. $79.95<br />
Also available:<br />
FX SOFTAIL BUCKET BACKREST PAD<br />
This backrest features a contoured back support area<br />
for greater passenger comfort.<br />
51130-98 Fits all low and tall medallion<br />
Sissy Bar uprights. (Does not<br />
fit Mini Sissy Bar Upright.) $79.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
D. FX SOFTAIL SEAT WITH RIDER BACKREST Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
240<br />
<strong>Softail</strong><br />
Sundowner Bucket Seats<br />
SOFTAIL SUNDOWNER DEEP BUCKET SEAT<br />
The ultimate combination of style and comfort,<br />
these wide double bucket seats are designed to<br />
cradle you and your passenger. Carefully shaped<br />
for maximum lower back support, the rider seating<br />
area has a recessed surface for extra comfort<br />
on long rides. The entire seat is constructed with<br />
high density foam, for long-term shape retention,<br />
and specially designed surface materials that are<br />
tested to withstand rider abrasion and harsh<br />
weather. The seat pan and hardware are made<br />
from the same high quality components as <strong>Harley</strong>-<br />
Davidson stock seats, ensuring perfect fitment<br />
and durability. Designed to match the styling of<br />
either the Heritage <strong>Softail</strong> Classic, Fat Boy,<br />
Heritage Springer or FX <strong>Softail</strong>.<br />
A. HERITAGE SOFTAIL CLASSIC<br />
SUNDOWNER DEEP BUCKET SEAT*<br />
This seat has double buckets for you and your passenger.<br />
Seat includes chrome spots to match your<br />
Heritage <strong>Softail</strong> Classic. Seat width 15.0", passenger<br />
pillion width 12.0".<br />
51572-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD). (Does<br />
not fit with Luggage Rack P/Ns<br />
53465-87B or 53831-00.) $259.95<br />
Also available:<br />
HERITAGE SOFTAIL CLASSIC<br />
BUCKET PASSENGER BACKREST PAD<br />
The bucket backrest pad is taller and wider than the<br />
stock pad. The foam contours to the lower back to<br />
provide added comfort for those long rides. Features<br />
chrome spots and includes all mounting hardware.<br />
52348-97 Fits FLSTC and FXSTC models<br />
with stock Sissy Bar upright and<br />
all other <strong>Softail</strong> models equipped<br />
with Low Sissy Bar Upright. $95.95<br />
B. FAT BOY SUNDOWNER<br />
DEEP BUCKET SEAT*<br />
This seat has double buckets for you and your passenger.<br />
Seat includes an embroidered logo to match<br />
your Fat Boy. Seat width 15.0", passenger pillion<br />
width 12.0".<br />
51570-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD).<br />
(Does not fit with Luggage Rack<br />
P/Ns 53465-87B or 53831-00.) $264.95<br />
Shown with:<br />
HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD<br />
Features large bucket shape, with a generous radius<br />
and ample padding. This backrest pad offers extra<br />
comfort for your passenger.<br />
51132-98 Fits <strong>Softail</strong> models (except<br />
FXSTD) equipped with Low<br />
Sissy Bar Upright. $79.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT<br />
B. FAT BOY SUNDOWNER DEEP BUCKET SEAT
C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT<br />
241<br />
<strong>Softail</strong><br />
Sundowner Bucket Seats<br />
C. HERITAGE SPRINGER SUNDOWNER DEEP<br />
BUCKET SEAT<br />
This seat has double buckets for you and your<br />
passenger. Seat includes matching concho and valance<br />
with fringe to complement the look of your FLSTS.<br />
51574-00 With Black Trim.<br />
Fits ’00-later FLSTS models.<br />
(Does not fit with FXSTD.) (Does<br />
not fit with Luggage Rack<br />
P/Ns 53465-87B or 53831-00.)<br />
Seat width 15.0", passenger<br />
pillion width 12.0". $349.95<br />
Shown with:<br />
HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD<br />
Features large bucket shape, with a generous radius<br />
and ample padding. This backrest pad offers extra<br />
comfort for your passenger.<br />
51132-98 Fits <strong>Softail</strong> models (except<br />
FXSTD) equipped with<br />
Low Sissy Bar Upright<br />
P/N 52735-85 or 53004-98. $79.95<br />
D. FX SOFTAIL SUNDOWNER<br />
DEEP BUCKET SEAT*<br />
This FX style bucket seat offers you and your passenger<br />
<strong>Softail</strong> style and added comfort for longer rides.<br />
51576-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD).<br />
Seat width 15.0", passenger<br />
pillion width 12.0". $239.95<br />
Shown with:<br />
FX SOFTAIL BUCKET BACKREST PAD<br />
This backrest features a contoured back support area<br />
for greater passenger comfort.<br />
51130-98 Fits all low and tall medallion<br />
Sissy Bar uprights. (Does not fit<br />
Mini Sissy Bar Upright.) $79.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
242<br />
<strong>Softail</strong><br />
Two-Up Seats<br />
A. SUNDOWNER TOURING SEAT*<br />
FOR SOFTAIL DEUCE MODELS<br />
When you’ve got the style of a <strong>Softail</strong> Deuce, you want<br />
to take on the road as much as possible. This<br />
Sundowner seat gives you added touring comfort<br />
without sacrificing the Deuce style that has heads<br />
turning. A wide and deep rider bucket allows for lower<br />
back support and comfort for the long haul and the wide<br />
passenger pillion allows your passenger to be comfortable<br />
as well. Styled to match your Deuce with an<br />
embroidered “H-D” logo. Includes all necessary mounting<br />
hardware. Seat width is 14.0"; passenger pillion<br />
width is 11.0". Combine with the Touring Passenger<br />
Backrest Pad for <strong>Softail</strong> Deuce P/N 52050-00 for additional<br />
passenger comfort.<br />
51112-00A Fits ’00-later FXSTD models. $259.95<br />
Shown with:<br />
TOURING PASSENGER BACKREST<br />
PAD FOR SOFTAIL DEUCE MODELS<br />
Together with the Touring Seat for <strong>Softail</strong> Deuce P/N<br />
51112-00, this backrest passenger pad provides<br />
additional support for the long haul with a wide radius<br />
backrest.<br />
52050-00 Fits ’00-later FXSTD models<br />
equipped with Passenger Sissy<br />
Bar Upright P/N 51114-00. $64.95<br />
B. SOFTAIL TWO-UP CUSTOM SEAT*<br />
WITH SNAKESKIN PRINT<br />
The edgy, custom snakeskin print fits your style, the<br />
contoured shape fits you and a passenger. Includes<br />
embroidered “H-D” Flying Wheel logo. Seat width<br />
14.0", pillion width 6.5".<br />
52850-00 Fits all ’00-later<br />
<strong>Softail</strong> models (except<br />
FLSTS and FXSTD). $239.95<br />
C. SOFTAIL TWO-UP CUSTOM SEAT*<br />
A textured rider area and sculptured shape for added<br />
support set this seat apart from the crowd. Kit<br />
includes passenger grab strap. Recommended passenger<br />
backrests are P/N 52517-94 (short rail),<br />
52965-98 (tall) and 52612-95 (low). Seat width 15.0";<br />
Passenger Pillion width 4.5".<br />
52850-97 Fits ’84-’99 <strong>Softail</strong><br />
models (except FLSTS). $239.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SUNDOWNER TOURING SEAT FOR SOFTAIL DEUCE MODELS<br />
B. SOFTAIL TWO-UP CUSTOM SEAT WITH SNAKESKIN PRINT<br />
C. SOFTAIL TWO-UP CUSTOM SEAT
D. SOFTAIL SOLO SEAT WITH REMOVABLE PILLION<br />
E. CUSTOM SEAT FOR NIGHT TRAIN MODELS<br />
1<br />
3<br />
5<br />
1<br />
2<br />
243<br />
<strong>Softail</strong><br />
Custom Seats<br />
D. SOFTAIL SOLO SEAT<br />
WITH REMOVABLE PILLION*<br />
This seat provides a wider seating area, a clean look<br />
and <strong>Softail</strong> style at a great price. Remove the passenger<br />
pillion for a stripped-down solo look. Seat width<br />
15.0". Pillion width 11.5".<br />
51578-00 Fits all ’00-later<br />
<strong>Softail</strong> models (except<br />
FLSTS and FXSTD). $229.95<br />
E. CUSTOM SEAT FOR<br />
NIGHT TRAIN MODELS<br />
Get additional two-up comfort and distinctive Night<br />
Train styling with this seat, featuring dark-as-night textured<br />
leather inserts branded with the Night Train logo<br />
and unmistakable <strong>Harley</strong> quality. Seat width 15.5";<br />
passenger pillion width 8.0".<br />
51536-00 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD and FLSTS). $249.95<br />
F. SOFTAIL SOLO SEAT WITH<br />
CHROME-STUDDED LEATHER VALANCE<br />
Nothing brings out the nostalgic look of <strong>Softail</strong> models<br />
more than a few well-placed chrome studs. This<br />
collection gives you the flexibility to cruise on a solo<br />
saddle or complete the look with the full collection.<br />
Styled to match your stock FLSTC models with<br />
Chrome Spots, Leather Valance and Piping.<br />
1. Solo Saddle*<br />
52236-86E Fits all ’84-’99 <strong>Softail</strong><br />
models (except FLSTS).<br />
Seat width 12.0". $189.95<br />
2. Low-Profile Passenger Pillion*<br />
52533-93A Fits ’00-later FL <strong>Softail</strong> models<br />
(except FLSTS) with stock seats.<br />
Also fits ’84-’99 <strong>Softail</strong> models.<br />
Grab strap included. Passenger<br />
Pillion width 7.0". $93.95<br />
3. Passenger Pillion*<br />
52208-96A Fits ’00-later FL <strong>Softail</strong> models<br />
(except FLSTS) with stock seats.<br />
Also fits ’84-’99 <strong>Softail</strong> models.<br />
Includes grab strap. Passenger<br />
Pillion width 12.5". $104.95<br />
4. Heritage <strong>Softail</strong> Classic Bucket<br />
Passenger Backrest Pad<br />
52348-97 Fits FLSTC and FXSTC<br />
models with stock upright and<br />
all other <strong>Softail</strong> models equipped<br />
with Low Sissy Bar Upright. $95.95<br />
5. Studded Backrest Pad<br />
52556-93 Fits FLSTC and FXSTC models<br />
with stock Sissy Bar upright and all<br />
other models with Sissy Bar Upright<br />
P/N 52735-85. Styled to match<br />
stock FLSTC models. $64.95<br />
6. Studded Short Rail Backrest Pad<br />
52516-94 Fits Short Rail Sissy Bar Uprights.<br />
Requires H-D Short Rail Upright<br />
P/N 52737-94A for installation. $57.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
F. CHROME-STUDDED SEAT COLLECTION Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
4<br />
6
244<br />
<strong>Softail</strong><br />
Diamond Back Seats, Solo Saddles<br />
A. DIAMOND BACK SOFTAIL SEAT*<br />
This <strong>Softail</strong> Diamond Back Seat fits with the same<br />
great Diamond Back seat styling. Fits with current<br />
<strong>Softail</strong> Diamond Back Tail Sections and Diamond<br />
Back Pillion P/N 52069-98 (sold separately). Seat<br />
width 13.8".<br />
52629-00 Fits all ’00-later <strong>Softail</strong> models<br />
(except FLSTS and FXSTD). $129.95<br />
Shown with:<br />
DIAMOND BACK PILLION*<br />
Adds two-up capability to Diamond Back Seat. This<br />
custom-look pillion complements the seats in our<br />
Diamond Back Collection and is interchangeable with<br />
Diamond Back Tail Sections. Kit includes pillion and<br />
passenger grab strap. Pillion width 5.0".<br />
52069-98 Fits ’83-later XL models and<br />
’84-later <strong>Softail</strong> models equipped<br />
with Diamond Back seats (except<br />
FLSTS and FXSTD). (Does not<br />
work with Detachable<br />
Pillion Hardware Kits.) $74.95<br />
Inset photo:<br />
DIAMOND BACK CHROME TAIL SECTIONS<br />
A hand-polished chrome-plated steel insert, fitted to a<br />
vinyl covered moulded base, provides long-lasting<br />
good looks. Includes mounting hardware for quick,<br />
easy installation. Can only be installed with appropriate<br />
Diamond Back Seat.<br />
Fits ’82-later XL, ’93-later FXDWG, ’82-’94 FXR, ’99<br />
FXR models, and ’84-later <strong>Softail</strong> models (except<br />
FLSTS).<br />
1. 52053-96 Diamond Accent. $79.95<br />
2. 52620-95 Solid. $79.95<br />
B. DELUXE LEATHER SOLO SADDLE<br />
WITH NOSTALGIC SKIRT<br />
52006-47B Requires Solo Seat Bracket/<br />
Spring Kit P/N 52225-89. $199.95<br />
C. STANDARD LEATHER SOLO SADDLE*<br />
First offered in 1925, a timeless design and a comfortable<br />
seat.<br />
52004-25 Requires Solo Seat Bracket/<br />
Spring Kit P/N 52225-89. $166.95<br />
Solo Seat Bracket/Spring Kit (not shown)<br />
Allows you to upgrade your <strong>Softail</strong> to the nostalgic<br />
look of a leather solo saddle. Complete kit includes<br />
front and rear mounting brackets, chrome-plated<br />
springs, all necessary hardware, and a frame/battery<br />
cover for a clean installation. This kit is required to<br />
install Deluxe Leather Solo Saddle P/N 52006-47B or<br />
Leather Solo Saddle P/N 52004-25.<br />
52225-89 Fits all ’86-’94 <strong>Softail</strong> models. $79.95<br />
D. PILLOW-LOOK SEAT* AND<br />
MATCHING BACKREST PADS<br />
Soft, plush pillow-look seat adds a measure of comfort<br />
and style. Includes embossed “<strong>Softail</strong>” logos and<br />
passenger grab strap.<br />
91768-96 Fits all ’84-’99 <strong>Softail</strong><br />
models (except FLSTS). $189.95<br />
Pillow-Look Tall Backrest Pad<br />
91770-85 Requires Insert-Style or<br />
Medallion Plate-Style Tall Sissy<br />
Bar Upright for installation. $75.95<br />
Pillow-Look Low Backrest Pad<br />
52545-84 Requires Low Plate-Style Sissy<br />
Bar Upright for installation. $57.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for the correct grab strap<br />
part number if not included in the seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
1<br />
A. DIAMOND BACK SOFTAIL SEAT SHOWN WITH DIAMOND BACK PILLION<br />
B. DELUXE LEATHER SOLO SADDLE<br />
WITH NOSTALGIC SKIRT<br />
2<br />
D. PILLOW-LOOK SEAT AND MATCHING BACKREST PADS<br />
C. STANDARD LEATHER SOLO SADDLE
E. TOURING PASSENGER PILLION FOR HERITAGE SOFTAIL CLASSIC MODELS<br />
F. FAT BOY COLLECTION<br />
1<br />
Stock Touring Pillion<br />
2<br />
245<br />
<strong>Softail</strong><br />
Pillions and Detachable Hardware<br />
E. TOURING PASSENGER PILLION*<br />
FOR HERITAGE SOFTAIL CLASSIC MODELS<br />
More long-haul comfort. Wider than the 12.5" stock<br />
version, this passenger pillion was designed to match<br />
the stock rider seat on the FLSTC, and features the<br />
signature chrome spots. Pillion width: 14".<br />
52912-00 Fits ’84-later <strong>Softail</strong> models<br />
(except FXSTD/I and FLSTS/I). $149.95<br />
F. FAT BOY COLLECTION<br />
1. Fat Boy Short Rail Upright Backrest Pad<br />
Requires separate purchase of P/N 52737-94A for<br />
installation.<br />
52514-94 $57.95<br />
2. Low-Profile Passenger Pillion*<br />
52534-93A Fits ’00-later FL <strong>Softail</strong> models<br />
(except FLSTS) with stock seats.<br />
Also fits ’84-’99 <strong>Softail</strong> models.<br />
(Does not include grab strap.) $93.95<br />
G. DETACHABLE SEAT HARDWARE KIT<br />
These hardware kits allow the rider to remove onepiece<br />
<strong>Harley</strong>-Davidson seats quickly and easily.<br />
51676-97 Fits ’97-later XL, Dyna, FLHRC and<br />
FLTR models, and ’97-’99 FXST, and FXSTS, models<br />
with two-up, one-piece seats. (Does not fit FLSTS or<br />
<strong>Softail</strong> Bucket Seats.) (Does not fit FXSTD.) $15.95<br />
51676-96 Fits ’96 XL, FXST, FXSTS<br />
and Dyna models with two-up, one-piece seats.<br />
(Does not fit <strong>Softail</strong> Bucket Seats.) $19.95<br />
51675-96 Fits ’82-’95 XL, ’84-’95<br />
FXSTC, FXSTS, ’91-’95 FXD and ’82-’94 FXR<br />
models with two-up, one-piece seats.<br />
(Does not fit <strong>Softail</strong> Bucket Seats.) $19.95<br />
NOTE: These kits do not work with <strong>Softail</strong> Seats with<br />
Rider Backrests.<br />
H. DETACHABLE PILLION PAD<br />
HARDWARE KIT<br />
Convert from two-up riding to solo riding in a matter<br />
of seconds using a hardware kit that bolts on to<br />
<strong>Harley</strong>-Davidson Original Equipment or accessory pillion<br />
pad. Chrome-plated attachment hardware and<br />
bracket offer improved fender-to-bracket isolation.<br />
Easy to install, the kit comes complete with all<br />
required fasteners and installation instructions. Patent<br />
applied for.<br />
52705-97 Fits ’97-later FLSTS<br />
models with pillion pads. $23.95<br />
51658-97 Fits ’97-later <strong>Softail</strong><br />
models with two-piece seats.<br />
(Does not fit FLSTS.) $35.95<br />
51657-96 Fits ’84-’95 <strong>Softail</strong> models<br />
with pillion pads. $35.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for the correct grab strap<br />
part number if not included in the seat kit.<br />
G. DETACHABLE SEAT HARDWARE KIT H. DETACHABLE PILLION PAD HARDWARE KIT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
246<br />
<strong>Softail</strong><br />
Backrest Pads<br />
A. SHORT BACKREST PAD<br />
FOR SOFTAIL DEUCE<br />
Styled to complement the <strong>Softail</strong> Deuce Badlander<br />
and Snakeskin seats.<br />
51534-00 Fits ’00-later FXSTD models<br />
equipped with Passenger Sissy<br />
Bar Upright P/N 51114-00. $49.95<br />
B. TALL BACKREST PAD<br />
FOR SOFTAIL DEUCE<br />
This taller backrest pad is designed to give the passenger<br />
more back support for the long haul. Works<br />
with the Tall Upright P/N 51144-02.<br />
51099-02 Fits ’00-later FXSTD models<br />
equipped with Deuce Tall<br />
Upright P/N 51144-02. $49.00<br />
C. SOFTAIL DEUCE<br />
PASSENGER BACKREST PAD<br />
Passenger backrest pad styled to match Passenger<br />
Upright P/N 51114-00.<br />
52549-00 Fits ’00-later FXSTD. $49.95<br />
D. TOURING PASSENGER BACKREST<br />
PAD FOR SOFTAIL DEUCE<br />
Together with the Touring Seat for <strong>Softail</strong> Deuce<br />
P/N 51112-00, this backrest passenger pad provides<br />
additional support for the long haul with a wide<br />
radius backrest.<br />
52050-00 Fits ’00-later FXSTD models<br />
equipped with Passenger Sissy<br />
Bar Upright P/N 51114-00. $64.95<br />
E. MINI RAIL BACKREST PAD<br />
Innovative Mounting System features a brushed<br />
stainless steel insert framed with chrome plate and<br />
hardware.<br />
52513-94 Fits XL, FXR, FXD, and <strong>Softail</strong><br />
models (except FXSTD) equipped<br />
with Badlander Custom Seats, select Exotic<br />
Collection Seats and appropriate<br />
Mini Rail Sissy Bar Upright. $50.95<br />
F. HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD<br />
Features large bucket shape, with a generous radius<br />
and ample padding. This backrest pad offers extra<br />
comfort for your passenger.<br />
51132-98 Fits <strong>Softail</strong> models (except<br />
FXSTD) equipped with Low<br />
Sissy Bar Upright. $79.95<br />
*NOTE: Two-up seats and seats with passenger<br />
pillions require the use of a grab strap. See your<br />
<strong>Harley</strong>-Davidson dealer for correct grab strap<br />
part number if not included in seat kit.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SHORT BACKREST PAD FOR<br />
SOFTAIL DEUCE<br />
C. SOFTAIL DEUCE PASSENGER BACKREST PAD D. TOURING PASSENGER BACKREST<br />
PAD FOR SOFTAIL DEUCE<br />
E. MINI RAIL BACKREST PAD<br />
NEW<br />
B. TALL BACKREST PAD FOR<br />
SOFTAIL DEUCE<br />
F. HERITAGE SPRINGER BUCKET<br />
PASSENGER BACKREST PAD
G. SHORT RAIL BACKREST PAD G. SHORT RAIL BACKREST PADS<br />
1<br />
H. FX SOFTAIL SHORT RAIL PASSENGER BACKREST PAD AND LOW PASSENGER BACKREST PAD<br />
2<br />
1 3<br />
247<br />
<strong>Softail</strong><br />
Backrest Pads<br />
G. SHORT RAIL BACKREST PADS<br />
Innovative Backrest Pad Mounting System features a<br />
brushed stainless steel insert framed with chrome<br />
plate and hardware.<br />
Fits Short Rail Sissy Bar Uprights.<br />
1. 52514-94 Fat Boy. $57.95<br />
2. 52516-94 Short Rail Backrest Pad-Studded. $57.95<br />
3. 52517-94 Smooth. $52.95<br />
4. 52518-94 Pillow-Look. $52.95<br />
H. FX SOFTAIL PASSENGER<br />
BACKREST PADS<br />
FX <strong>Softail</strong> Low Passenger Backrest Pad<br />
1. 52087-98 Fits <strong>Softail</strong> models<br />
(except FXSTD) equipped<br />
with Low Sissy Bar Upright. $59.95<br />
FX <strong>Softail</strong> Short Rail Passenger Backrest Pad<br />
2. 52085-98 Fits <strong>Softail</strong> models<br />
equipped with Short Rail<br />
Sissy Bar Upright. $54.95<br />
I. FAT BOY BUCKET BACKREST PAD<br />
This bucket backrest pad is taller and wider; the foam<br />
contours to the back for added comfort on those long<br />
hauls.<br />
52347-97 Fits FLSTF models with separate<br />
purchase of Low Sissy Bar<br />
Upright P/N 52735-85. Also fits<br />
FLSTC and FXSTC models with<br />
stock Sissy Bar Uprights. $95.95<br />
J. BUCKET BACKREST PAD<br />
The bucket backrest pad is taller and wider; the foam<br />
contours to the lower back to provide added comfort<br />
for those long rides. Features a smooth cover and Bar<br />
& Shield logo. Includes all mounting hardware.<br />
52350-97 Fits FLSTC and FXSTC<br />
models with stock Sissy Bar<br />
Upright and all other <strong>Softail</strong> models<br />
(except FXSTD) fitted with<br />
Sissy Bar Upright. $84.95<br />
I. FAT BOY BUCKET BACKREST PAD J. BUCKET BACKREST PAD Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
2<br />
4
248<br />
<strong>Softail</strong><br />
Backrest Pads<br />
A. PLAIN BACKREST PAD WITH CONCHO<br />
52615-97 Fits ’97-later FLSTS models.<br />
Requires separate purchase of<br />
Low Sissy Bar Upright. $69.95<br />
B. FAT BOY LOW BACKREST PAD<br />
Includes mounting bracket, hardware and installation<br />
instructions. Requires separate purchase of Low Sissy<br />
Bar Upright P/N 52735-85.<br />
52532-90 Fits ’84-later <strong>Softail</strong><br />
models (except FXSTD). $72.95<br />
C. TOP-STITCHED LOW BACKREST PADS<br />
Matches models with top-stitched seats. Also matches<br />
’99 FXR model stock seat.<br />
Fits with H-D Low Plate-Style Sissy Bar Upright.<br />
1. 52612-95 Smooth. $57.95<br />
2. 52614-95 Pillow-Look. $57.95<br />
D. LOW BACKREST PADS<br />
Includes all necessary mounting hardware/brackets to<br />
fit Low Plate-Style Sissy Bar Upright.<br />
1. 52412-79A With Embossed Bar & Shield. $51.95<br />
2. 52495-88 Smooth.<br />
Matches FXST, FXSTS,<br />
FXRS-SP, XL (std.), and FXD<br />
(Super Glide) stock<br />
production seats. $51.95<br />
3. 52545-84 Pillow-Look.<br />
Requires Low Plate-Style<br />
Sissy Bar Upright P/N 52735-85<br />
for installation. $57.95<br />
E. TALL SISSY BAR BACKREST PADS<br />
Quality backrest pads include chrome-plated mounting<br />
brackets and hardware.<br />
Smooth, Top-Stitched<br />
1. 52965-98 Matches Smooth, Top-Stitched<br />
H-D stock and accessory<br />
seats. Requires Insert-Style<br />
or Medallion Plate-Style Tall Sissy<br />
Bar Upright for installation. $75.95<br />
Pillow-Look Tall<br />
2. 91770-85 Requires Insert-Style or<br />
Medallion Plate-Style Tall Sissy<br />
Bar Upright for installation. $75.95<br />
F. SISSY BAR UPRIGHT<br />
SLIP-OVER BACKREST PADS<br />
Slip-on for passenger comfort. Easily removed to<br />
show off chrome Sissy Bar uprights.<br />
1. 52563-82 Fits all Tall Sissy Bar Uprights. $39.95<br />
2. 91819-85 Fits all Low Sissy Bar Uprights. $34.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. PLAIN BACKREST PAD WITH CONCHO B. FAT BOY LOW BACKREST PAD<br />
1<br />
C. TOP-STITCHED LOW BACKREST PADS D. LOW BACKREST PADS<br />
1<br />
E. TALL BACKREST PADS<br />
2<br />
2<br />
1<br />
1<br />
2<br />
F. SISSY BAR SLIP-OVER BACKREST PADS<br />
3<br />
2
G. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS<br />
H. HERITAGE SPRINGER BACKREST PADS – TALL<br />
I. HERITAGE SPRINGER RIDER<br />
BACKREST PAD – LOW<br />
J. HERITAGE SPRINGER DETACHABLE<br />
PASSENGER HANDRAIL<br />
NEW<br />
249<br />
<strong>Softail</strong><br />
Tail Sections and Backrests<br />
G. COLOUR-MATCHED TAIL SECTION<br />
FOR SOFTAIL DEUCE MODELS*<br />
Add a splash of colour behind your Deuce model’s<br />
Solo Seat while hiding the rear fender’s Sissy Bar<br />
Upright mounting holes with these exclusive colourmatched<br />
Tail Sections.<br />
Fits ’00-later FXSTD models equipped with any GMA<br />
Solo Seat for FXSTD models.<br />
51110-00BDK Primed. $79.95<br />
51110-00DH Vivid Black. $109.95<br />
51110-00ZQ Luxury Rich Red. $109.95<br />
51110-00NV Aztec Orange Pearl. $109.95<br />
51110-00NR Sinister Blue Pearl. $109.95<br />
51110-00ZL Diamond Ice. $109.95<br />
51110-00QH Concord Purple. $109.95<br />
51110-00XG Real Teal. $109.95<br />
51110-01XE Luxury Blue. $109.95<br />
51110-00ZB White Pearl. $109.95<br />
H. HERITAGE SPRINGER BACKREST PADS<br />
Attaches to FLSTS Heritage Springer passenger grab<br />
rail, with more height for added support. Includes<br />
chrome-plated hardware and bracketry, and passenger<br />
grab strap kit.<br />
Rider Backrest Pad, Tall<br />
52827-97 Fits ’97-later FLSTS<br />
Heritage Springer models. $114.95<br />
Passenger Backrest Pad, Tall<br />
Tall backrest offers extra comfort.<br />
52829-97 Fits ’97-later Heritage<br />
Springer models equipped<br />
with Detachable Passenger<br />
Handrail P/N 53736-97.<br />
(Cannot be used with or on<br />
the front handrail.) $114.95<br />
I. HERITAGE SPRINGER<br />
RIDER BACKREST PAD – LOW<br />
Attaches easily to FLSTS Heritage Springer passenger<br />
grab rail to provide a little support and a lot of style.<br />
Includes chrome-plated hardware and passenger<br />
grab strap kit.<br />
52826-97 Fits ’97-later FLSTS<br />
Heritage Springer models. $89.95<br />
J. HERITAGE SPRINGER<br />
DETACHABLE PASSENGER HANDRAIL<br />
Brilliant chrome-plating.<br />
53736-97 Fits ’97-later FLSTS. See<br />
“Detachable Docking<br />
Hardware Matrix” or Instruction<br />
Sheet for required docking<br />
hardware. (Will not work with<br />
Chrome 3-Channel Luggage<br />
Rack P/N 53465-87B.) $185.00<br />
*NOTE: This product is a “paint to order” accessory.<br />
Please allow an average of 5 weeks delivery for<br />
this item.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
250<br />
<strong>Softail</strong><br />
Sideplates<br />
A. GENUINE HARLEY-DAVIDSON<br />
SIDEPLATE KITS<br />
Manufactured to rigid specifications by American craftsmen<br />
and designed to accept our current line of Sissy<br />
Bar Uprights.<br />
Rigid-Mount Sideplates – Chrome<br />
53378-03 Fits ’00-later FXSTS, FXST,<br />
FXSTB and FLSTF models.<br />
’00-’02 models require<br />
separate purchase of Hardware<br />
Kit P/N 53388-03. $74.95<br />
53374-03 Fits ’00-later FLSTC and FLSTS<br />
models. ’00-’02 models require<br />
separate purchase of Hardware<br />
Kit P/N 53388-03. $74.95<br />
52786-84B Fits ’97-’99 FLSTS and all ’84-’99<br />
FXSTC, and FXSTS models. $69.95<br />
52791-86A Fits all ’86-’99 FLSTC, FLSTF,<br />
FLSTN models (except FLSTS). $74.95<br />
Rigid-Mount Sideplates – Wrinkle Black<br />
53387-03 Fits ’00-later FXSTS, FXST, FXSTB<br />
and FLSTF models. ’00-’02 models<br />
require separate purchase of<br />
Hardware Kit P/N 53388-03. $54.95<br />
53004-98 Fits ’98-’99 FXSTB; ’97-’99<br />
FLSTS; ’84-’99 FXSTC and FXSTS<br />
models. (Does not fit FXSTD.) $54.95<br />
Rigid Sideplate Hardware Kit<br />
53388-03 Hardware kit is required to<br />
install Rigid Sideplates P/N<br />
53378-03, 53374-03 and<br />
53387-03 on ’00-’02 models $4.95<br />
Detachable Sideplates – Chrome<br />
Quick Detachable Sissy Bar Sideplates are custom<br />
designed to transform your bike from a Sissy Barmounted,<br />
two-up highway cruiser to a boulevard custom<br />
at the snap of a rotary latch. These sideplates<br />
incorporate a spring-loaded cam hardware. Sissy Bar<br />
Uprights sold separately. Patented.<br />
53810-00 Fits ’00-later FLSTF, FXST, FXSTS<br />
or FXSTB models with or without<br />
saddlebags. (Does not fit FXSTD.)<br />
Requires separate purchase of<br />
Docking Hardware Kit and may<br />
require Directional Relocation Kit.<br />
See chart for your application $129.95<br />
53815-00 Fits ’00-later FLSTC and<br />
FLSTS models (except FXSTD).<br />
Requires separate purchase of<br />
Docking Hardware Kit and may<br />
require Directional Relocation Kit.<br />
See chart for your application $129.95<br />
53549-95 Fits ’84-’99 <strong>Softail</strong> models (except<br />
FLSTS).Requires separate purchase<br />
of Docking Hardware Kit and may<br />
require Directional Relocation Kit.<br />
See chart for your application $129.95<br />
Detachable Sideplates – Wrinkle Black<br />
53857-00A Fits ’00-later FLSTF, FXST, FXSTS<br />
and FXSTB models with and without<br />
saddlebags. (Does not fit FXSTD models.)<br />
Requires separate purchase of<br />
Docking Hardware Kit and may<br />
require Directional Relocation Kit.<br />
See chart for your application $94.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
Rigid Mount – Chrome<br />
Detachable – Wrinkle Black<br />
A. GENUINE HARLEY-DAVIDSON SIDEPLATE KITS<br />
Rigid Mount – Chrome<br />
Detachable – Chrome
1984 – 1999 SOFTAIL DOCKING HARDWARE FOR DETACHABLE RACKS, HANDRAILS & SIDEPLATES<br />
Docking hardware fitment is dependent on vehicle model and saddlebag configuration.<br />
DETACHABLE<br />
DETACHABLE ACCESSORY MODEL FITMENT SIDEPLATE DOCKING HARDWARE DIRECTIONAL RELOCATION KIT<br />
Detachable Sideplates; 53459-95 and Saddlebags:<br />
Heritage Style, 90835-90; Leather Saddlebags,<br />
91555-01A, 53061-00A<br />
1984-1999 FLSTC 53549-95 53371-95A $31.95 Not Required<br />
Detachable Sideplates; 53549-95 and Saddlebags: 1984-1999 FLSTC 53549-95 53370-95B $31.95 Not Required<br />
Fat Boy, 90381-98; Leather Saddlebags, 91555-01A,<br />
53061-00<br />
1993-1999 FLSTN<br />
Detachable Sideplates; 53549-95 and Saddlebags: 1984-1999 FXSTSB, FXSTS, 53549-95 53370-95B $31.95 53692-96 $34.95<br />
Fat Boy, 90381-98, 90833-90C FXSTC, FLSTF<br />
Detachable Sideplates; 53549-95 only 1984-1999 FLSTC,<br />
1993-1999 FLSTN<br />
53549-95 53531-95A $24.95 Not Required<br />
Detachable Sideplates; 53549-95 only 1984-1999 FXSTSB, FXSTS,<br />
FXSTC, FLSTF<br />
53549-95 53531-95A $24.95 53692-96 $34.95<br />
Heritage Springer Solo Rack; 53715-97 1997-1999 FLSTS Not Required 90368-97 & $38.95 Not Required<br />
90306-97A Required $25.95<br />
Heritage Springer Detachable Passenger Handrail;<br />
53736-97 (Fits with Detachable Two-Up Rack;<br />
53740-97) (Not compatible with 3-Channel<br />
Luggage Rack; 53465-87B)<br />
1997-1999 FLSTS Not Required 90368-97 $38.95 Not Required<br />
Heritage Springer Detachable Two-up Rack; 1997-1999 FLSTS Not Required 90368-97 & $38.95 Not Required<br />
53740-97, (Fits with Detachable Handrail; 53736-97)<br />
(Not compatible with Rigid Sideplate 52786-84B)<br />
90306-97A Required $25.95<br />
Detachable Sideplates and Hard Saddlebags 90224-00xx 1987-1999 FLSTC 53549-95 53009-03 & $9.95 Included With Bags<br />
53531-95A Required $24.95<br />
Detachable Sideplates and Hard Saddlebags 90225-00xx 1987-1999 FXST, FXSTC, 53549-95 53009-03 & $9.95 Included With Bags<br />
FXSTS, FXSTB 53531-95A Required $24.95<br />
Detachable Sideplates and Hard saddlebags 90715-00xx 1990-1999 FLSTF 53549-95 53009-03 & $9.95 Included With Bags<br />
53531-95A Required $24.95<br />
2000 – LATER SOFTAIL DOCKING HARDWARE FOR DETACHABLE RACKS, HANDRAILS, TOUR PAK RACKS & SIDEPLATES<br />
Docking hardware fitment is dependent on vehicle model and saddlebag configuration.<br />
251<br />
<strong>Softail</strong><br />
Docking Hardware<br />
DETACHABLE ACCESSORY MODEL FITMENT* DETACHABLE SIDEPLATE DOCKING HARDWARE DIRECTIONAL RELOCATION KIT<br />
Detach Sideplates: 53810-00 (Chrome), 2000-2001 FLSTF, 53810-00 – Chrome 53821-00 $24.95 53820-00 $24.95<br />
53857-00A (Black) or Detach Tour Pak Rack 53066-00A FXST/B/S 53857-00A – Black<br />
with P&A Bags: 92000-00B, 91536-00A, 90320-00B, 2002 FLSTF, 53810-00 – Chrome 53821-00 $24.95 53859-02A $24.95<br />
90114-00A, 90130-00B,90119-00A, 91537-00A, FXST/B/S 53857-00A – Black<br />
91555-01A, 53061-00, and 92015-03 2003 FLSTF, 53810-00 – Chrome 53930-03 $24.95 53933-03 $24.95<br />
FXST/B/S 53857-00A – Black<br />
Detach Sideplates: 53810-00A (Chrome), 2000-2001 FLSTF, 53810-00 – Chrome 53824-00 $31.95 53820-00 $24.95<br />
53857-00A (Black) or Detach Tour Pak Rack 53066-00A FXST/B/S 53857-00A – Black<br />
without P&A Bags: 2002 FLSTF, 53810-00 – Chrome 53824-00 $31.95 53859-02A $24.95<br />
FXST/B/S 53857-00A – Black<br />
2003 FLSTF, 53810-00 – Chrome 53932-03 $31.95 53933-03 $24.95<br />
FXST/B/S 53857-00A – Black<br />
Detach Sideplates; 53815-00 (Chrome) 2000-2002 FLSTC 53815-00 – Chrome 53822-00 $31.95 Not Required<br />
or Detachable Tour Pak Rack 53066-00A with O.E. bags. 2003 FLSTC 53815-00 – Chrome 53931-03 $31.95 Not Required<br />
2000-2001 FLSTS 53815-00 – Chrome 53822-00 $31.95 53820-00 $24.95<br />
2002 FLSTS 53815-00 – Chrome 53822-00 $31.95 53859-02A $24.95<br />
2003 FLSTS 53815-00 – Chrome 53931-03 $31.95 53933-03 $24.95<br />
Heritage Springer Detach Passenger<br />
Handrail; 53736-97 (Not compatible with<br />
2000-2002 FLSTS Not Compatable 90368-97 $38.95 Not Required<br />
3-Channel Luggage Rack; 53465-87B) 2003 FLSTS Not Compatable 53931-03 $31.95 Not Required<br />
Heritage Springer Detach Solo Rack 53903-00 2000-2001 FLSTS Not Compatable 90368-97 & $38.95<br />
90306-97A $25.95 Not Required<br />
2002 FLSTS Not Compatable 90368-97 & $38.95<br />
90321-01A $29.95 Not Required<br />
2003 FLSTS Not Compatable 53931-03 & $31.95<br />
90366-03 $29.95 Not Required<br />
Detach Sideplates and Hard Saddlebags 90224-00xx 2000-2002 FLSTC 53810-00 – Chrome 53821-00 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53009-03 $9.95<br />
2003 FLST/C, 53810-00 – Chrome 53930-03 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53075-03 $24.95<br />
Detach Sideplates and Hard Saddlebags 90225-00xx 2000-2001 FXST/S/B 53810-00 – Chrome 53821-00 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53009-03 $9.95<br />
2003 FXST/S/B 53810-00 – Chrome 53930-03 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53075-03 $24.95<br />
Detach Sideplates and Hard Saddlebags 90715-00xx 2000-2002 FLSTF 53810-00 – Chrome 53821-00 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53009-03 $9.95<br />
2003 FLSTF 53810-00 – Chrome 53930-03 & $24.95 Included With Hard Saddlebags<br />
53857-00A – Black 53075-03 $24.95<br />
* Includes carburetted and EFI models
252<br />
<strong>Softail</strong><br />
Sissy Bar Uprights<br />
A. GENUINE HARLEY-DAVIDSON<br />
SISSY BAR UPRIGHTS FOR SOFTAIL<br />
Manufactured to rigid specifications in the U.S.A. Also<br />
accepts various H-D luggage racks. Backrest pads<br />
sold separately.<br />
Fits all ’84-later <strong>Softail</strong> models equipped with appropriate<br />
sideplates (see sideplate fitment for specific<br />
models) as follows:<br />
Rigid-Mount Sideplates<br />
P/Ns 52094-00, 52095-00, 52786-84B, 52791-86A,<br />
53843-00, 53004-98, 53374-03, 53378-03 and<br />
53387-03.<br />
Detachable Sideplates<br />
P/Ns 53810-00A, 53815-00, 53549-95, 53857-00A.<br />
Mini Rail Sissy Bar Upright<br />
Unique hidden Backrest Pad Attachment makes for<br />
ultra-clean look with pad removed. NOTE: Must only<br />
be installed on models equipped with Badlander<br />
Custom Seats. Backrest pads must be purchased<br />
separately.<br />
1. 52738-94A Chrome Plain. $59.95<br />
52823-95A Gloss Black Plain. (not shown) $57.95<br />
Short Rail Sissy Bar Upright<br />
This Sissy Bar upright is lower than traditional low<br />
uprights and the hidden backrest pad mounting system<br />
allows for a sleek look when the pad is removed.<br />
2. 52737-94A Chrome Plain. $65.95<br />
3. 52822-95A Gloss Black Plain. $62.95<br />
53010-98 Wrinkle Black Plain. (not shown) $39.95<br />
Low Sissy Bar Uprights<br />
Give your passenger a rest with a Low Sissy Bar<br />
Upright equipped with your choice of Backrest Pad<br />
(sold separately).<br />
4. 52735-85 Chrome Medallion Plate-Style. $74.95<br />
52731-00 Chrome Medallion Plate-Style.<br />
(Stock on ’00-later FLSTC/I<br />
models). (not shown) $74.95<br />
5. 52736-85A Chrome Insert-Style. $74.95<br />
53007-98 Wrinkle Black Medallion<br />
Plate Style. (not shown) $45.95<br />
6. 52819-95 Gloss Black<br />
Medallion Plate-Style. $74.95<br />
Tall Sissy Bar Uprights<br />
Let your passenger ride tall in the saddle with a Tall<br />
Sissy Bar Upright equipped with your choice of<br />
Backrest Pad (sold separately).<br />
7. 53552-81A Chrome Insert-Style. $84.95<br />
8. 52749-85A Chrome Medallion Plate-Style. $84.95<br />
NOTE: All black parts are painted with a special twostep<br />
urethane process with hardeners for a durable,<br />
glossy shine. As with any painted surface, care must<br />
be taken when using.<br />
B. CHROME BACKREST MOUNT<br />
Chrome plated backrest mount with hidden fasteners.<br />
Allows the mounting of Sissy Bar medallions or can be<br />
used as is for a clean look.<br />
Mini<br />
52527-01 Fits XL, Dyna, and <strong>Softail</strong> models<br />
equipped with <strong>Harley</strong>-Davidson<br />
Mini Sissy Bar Upright and<br />
matching Backrest Pad. $22.95<br />
Short<br />
52531-01 Fits XL, Dyna, and <strong>Softail</strong> models<br />
equipped with <strong>Harley</strong>-Davidson<br />
Short Sissy Bar Upright and<br />
matching Backrest Pad. $22.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. GENUINE HARLEY-DAVIDSON SISSY BAR UPRIGHTS FOR SOFTAIL<br />
NEW<br />
7<br />
B. CHROME BACKREST MOUNT – MINI<br />
(SHOWN WITH DECORATIVE MEDALLION-<br />
OVAL WITH BAR & SHIELD)<br />
6<br />
1<br />
8<br />
3<br />
NEW<br />
5<br />
B. CHROME BACKREST MOUNT – SHORT<br />
4<br />
2
C. DECORATIVE MEDALLIONS<br />
D. BILLET BACKREST MOUNT FOR MINI RAIL UPRIGHTS<br />
E. BILLET BACKREST MOUNT FOR<br />
SHORT RAIL UPRIGHTS<br />
NEW<br />
STOCK BRACKET<br />
253<br />
<strong>Softail</strong><br />
Medallions & Billet Backrest Mounts<br />
C. DECORATIVE MEDALLIONS<br />
Display a touch of attitude. Ideal for use on plate-style<br />
Sissy Bar uprights and battery covers, the adhesive<br />
backing on these high-quality cast medallions allow<br />
easy installation on most flat surfaces. The medallions<br />
are available in black accented chrome or antique<br />
nickel finishes. The Oval Bar & Shield and the Bar &<br />
Shield with Wings medallions look great with Chrome<br />
Backrest Mount P/N 52527-01 and 52531-01.<br />
Oval with Bar & Shield – Chrome<br />
91716-02 Size 3 3/8" x 1 1/2". $11.95<br />
Skull – Chrome<br />
91718-02 Size 3 5/8" x 3". $16.95<br />
Skull – Antique Nickel<br />
91720-02 Size 3 5/8" x 3". $16.95<br />
Skull with Wings – Chrome<br />
91723-02 Size 5" x 1 1/2". $11.95<br />
Skull with Wings – Antique Nickel<br />
91732-02 Size 5" x 1 1/2". $11.95<br />
Bar & Shield with Wings – Chrome<br />
91745-02 Size 4" x 1 1/2". $11.95<br />
D. BILLET BACKREST MOUNT<br />
FOR MINI RAIL UPRIGHTS<br />
Made from chrome-plated billet aluminium and featuring<br />
an engraved Bar & Shield emblem, this backrest<br />
mount cleans up the look of the stock backrest pad by<br />
replacing the stock mounting plate with chrome billet.<br />
Comes complete with chrome-plated hardware. From<br />
the workshop of Wyatt Fuller.<br />
52552-01 Fits XL, Dyna and <strong>Softail</strong><br />
models equipped with<br />
<strong>Harley</strong>-Davidson Mini Sissy<br />
Bar Upright and Backrest Pad. $39.95<br />
E. BILLET BACKREST MOUNT<br />
FOR SHORT RAIL UPRIGHTS<br />
Chrome-plated billet aluminium and an engraved Bar<br />
& Shield emblem set the tone for this custom backrest<br />
mount, which cleans up the look of the stock backrest<br />
pad by replacing the stock mounting plate with<br />
chrome billet. Comes complete with chrome-plated<br />
hardware. From the workshop of Wyatt Fuller.<br />
52554-01 Fits XL, Dyna and <strong>Softail</strong><br />
models equipped with <strong>Harley</strong>-<br />
Davidson Short Sissy Bar<br />
Upright and Backrest Pad. $43.95<br />
F. CHROME BILLET<br />
SEAT MOUNTING BRACKET<br />
The highly stylised design of this bracket adds a<br />
stunning new look to the back of most seats.<br />
51804-02 Replaces bolt-on seat brackets P/N<br />
51798-00, 51652-97 and 51652-83B<br />
used on most Original Equipment<br />
and accessory seats and pillions.<br />
See parts catalogue or instruction<br />
sheet for your application. $19.95<br />
F. CHROME BILLET SEAT MOUNTING BRACKET Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
254<br />
<strong>Softail</strong><br />
Deuce Racks and Sissy Bar Uprights<br />
A. SOFTAIL DEUCE<br />
CHROME LUGGAGE RACK*<br />
This chrome-plated luggage rack is styled after the<br />
Deuce model’s unique console and mounts easily to<br />
the passenger upright with two bolts. For convenience,<br />
the rack is easily removable using simple tools.<br />
Requires installation of Passenger Upright Kit P/N<br />
51114-00. Patented.<br />
53806-00 Fits ’00-later FXSTD. $110.95<br />
Shown with:<br />
SOFTAIL DEUCE PASSENGER<br />
BACKREST PAD<br />
Passenger backrest pad styled to match Passenger<br />
Upright P/N 51114-00.<br />
52549-00 Fits ’00-later FXSTD. $49.95<br />
B. SOFTAIL DEUCE CHROME<br />
PASSENGER SISSY BAR UPRIGHT<br />
The Deuce was designed to accept this chrome-plated<br />
upright without the need for sideplates, providing a<br />
clean look. The patented design allows the upright to be<br />
mounted directly to the fender, giving the appearance<br />
that the upright comes right out of the seat. Easily<br />
removable, the upright offers you an instant option of<br />
stock Original Equipment look. Mounting hardware<br />
installs in minutes, and is hidden from view by a unique<br />
cut-out in the passenger pillion base.<br />
51114-00 Fits ’00-later FXSTD. $79.95<br />
C. SOFTAIL DEUCE TALL<br />
SISSY BAR UPRIGHT<br />
This upright offers additional back support for tall passengers.<br />
2" taller than the popular P/N 51114-00 Sissy<br />
Bar Upright, this upright is easily removable, and the<br />
unique mounting system is hidden for a sleek look.<br />
51144-02 Fits ’00-later FXSTD models. $94.95<br />
1 *WARNING:<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as a seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL DEUCE CHROME LUGGAGE RACK<br />
B. SOFTAIL DEUCE CHROME<br />
PASSENGER SISSY BAR UPRIGHT<br />
C. SOFTAIL DEUCE TALL<br />
SISSY BAR UPRIGHT
D. CHROME SPORT LUGGAGE RACK<br />
E. SOFTAIL TWO-UP SPORT LUGGAGE RACK F. WRINKLE BLACK TWO-UP<br />
SPORT LUGGAGE RACK<br />
D. CHROME SPORT LUGGAGE RACK*<br />
This hand-polished, chrome-plated rack brings<br />
touring flexibility to <strong>Softail</strong> models. Can be used with<br />
Detachable or Rigid mount Sissy Bar Sideplates.<br />
53862-00 Fits all <strong>Softail</strong> models with Detachable<br />
Sideplates or Rigid Mount Sideplates<br />
except models equipped with Mini Rail<br />
Sissy Bar Upright or Short Rail Upright.<br />
(Does not fit <strong>Softail</strong> models equipped<br />
with one-piece welded Sissy Bar<br />
and sideplates.) $105.95<br />
E. SOFTAIL TWO-UP SPORT LUGGAGE RACK*<br />
This hand-polished, chrome-plated rack brings twoup<br />
touring flexibility to <strong>Softail</strong> models. Can be used<br />
with Detachable or Rigid mount Sissy Bar sideplates.<br />
53713-96 Fits all <strong>Softail</strong> models with Detachable<br />
Sideplates or Rigid Mount Sideplates<br />
except models equipped with Mini Rail<br />
Sissy Bar Upright or Short Rail Upright.<br />
(Does not fit <strong>Softail</strong> models equipped<br />
with one-piece welded Sissy Bar<br />
and sideplates.) $145.95<br />
F. WRINKLE BLACK TWO-UP<br />
SPORT LUGGAGE RACK*<br />
This rack, designed specifically for the Night Train,<br />
teams up perfectly with our accessory wrinkle black<br />
Sissy Bar and sideplates to create the ultimate custom<br />
touring <strong>Harley</strong>-Davidson motorcycle.<br />
53850-00 Fits all <strong>Softail</strong> models with Detachable<br />
Sideplates or Rigid Mount Sideplates<br />
except models equipped with Mini Rail<br />
Sissy Bar Upright or Short Rail Upright.<br />
(Does not fit <strong>Softail</strong> models equipped<br />
with one-piece welded Sissy Bar<br />
and sideplates.) $110.95<br />
1 *WARNING:<br />
255<br />
<strong>Softail</strong><br />
Luggage Racks<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as a seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
256<br />
<strong>Softail</strong><br />
Chrome Racks<br />
A. CHROME BOBTAIL FENDER RACK*<br />
Not only is it functional, but it’s a great way to emphasize<br />
the legendary lines of the Bobtail. Designed for<br />
easy installation on models with or without Sissy Bar<br />
Uprights. A stamped “<strong>Harley</strong>-Davidson” nameplate<br />
adds the finishing touch.<br />
56481-03 Fits ’00-later FXST, FXSTB and<br />
FXSTS models. Seat Bracket<br />
Kit P/N 52030-98 is necessary<br />
for installation when used with<br />
Original Equipment Seat. $89.95<br />
56466-86C Fits ’84-’99 FXST, FXSTB, FXSTC,<br />
FXSTSB, FXSTS and ’86-earlier FXWG,<br />
FX models with Bobtail Fender Kit.<br />
(Does not fit FXDWG.) $69.95<br />
B. HERITAGE SPRINGER<br />
DETACHABLE SOLO RACK*<br />
Can be installed or removed in 60 seconds or less<br />
with no tools. Detachable convenience with characteristic<br />
Heritage Springer styling.<br />
53903-00 Fits ’00-later FLSTS models.<br />
’00-’01 models require separate<br />
purchase of Detachable Docking<br />
Hardware Kits P/Ns 90368-97 and<br />
90306-97A. ’02 models require the<br />
separate purchase of Rear Docking<br />
Kits P/N’s 90321-00 and 90368-97.<br />
’03 models require separate purchase<br />
of hardware kit P/N 53931-03<br />
and 90366-03 $219.95<br />
53715-97 Fits ’97-’99 FLSTS models. Requires<br />
separate purchase of Detachable<br />
Docking Hardware Kits P/Ns<br />
90368-97 and 90306-97A. $199.95<br />
C. HERITAGE SPRINGER<br />
DETACHABLE TWO-UP RACK*<br />
Chrome-plated rack features nostalgic Heritage<br />
Springer styling.<br />
53740-97 Fits ’97-’99 FLSTS models with<br />
Detachable Docking Hardware Kits<br />
P/Ns 90368-97 and 90306-97A.<br />
(Does not work with Rigid<br />
Sideplate Kit P/N 52786-84B.) $234.95<br />
Heritage Springer Detachable<br />
Docking Hardware Kits (not shown)<br />
90368-97 Fits ’97-later FLSTS models.<br />
Includes front hardware. $38.95<br />
90306-97A Fits ’97-’01 FLSTS models.<br />
Includes rear hardware. $25.95<br />
90321-01A Fits ’02-later FLSTS models.<br />
Includes rear hardware. $29.95<br />
TURN SIGNAL RELOCATION KIT (not shown)<br />
90366-03 Fits ’03-later FLSTS models.<br />
Kit required for Heritage<br />
Springer Detachable Solo<br />
Rack P/N 53903-00. $29.95<br />
1 *WARNING:<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as a seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME BOBTAIL FENDER RACK<br />
B. HERITAGE SPRINGER<br />
DETACHABLE SOLO RACK<br />
C. HERITAGE SPRINGER<br />
DETACHABLE TWO-UP RACK
D. CHROME 3-CHANNEL LUGGAGE RACK WITH HANDRAIL<br />
E. CHROME LUGGAGE RACKS F. CHROME 3-CHANNEL<br />
LUGGAGE/FENDER RACK<br />
D. CHROME 3-CHANNEL<br />
LUGGAGE RACK WITH HANDRAIL*<br />
53831-00 Fits all ’00-’02 <strong>Softail</strong> models<br />
(except FXSTD). FLSTC and FLSTS<br />
models only require a separate purchase<br />
of Mounting Kit P/N 68773-97A. (Does<br />
not fit with seats with rider backrests or<br />
bucket style seats.) (Does not fit<br />
with Detachable Sideplates.) $136.95<br />
Chrome 3-Channel<br />
Luggage Rack With Handrail*<br />
Includes spacers necessary for mounting on ’90-<br />
’99 FLSTC models with factory-equipped leather<br />
saddlebags.<br />
53465-87B Fits all ’84-’99 <strong>Softail</strong> models including<br />
FLSTS Heritage Springer. FLSTS models<br />
require Mounting Hardware Kit P/N<br />
68773-97A (not shown) for installation.<br />
FXSTC, FXSTS/B and FLSTF models<br />
require installation of Directional<br />
Relocation Kit P/N 68548-87A. NOTE:<br />
May interfere with licence plates in some<br />
states when installed on <strong>Softail</strong> models.<br />
Will not work with Detachable Handrail<br />
P/N 53736-97 or with <strong>Softail</strong><br />
seats with rider backrest. $135.95<br />
Mounting Kit for 3-Channel Luggage Rack<br />
68773-97A Fits ’84-’02 FLSTC and<br />
FLSTS models only. $19.95<br />
Directional Relocation Kit (not shown)<br />
Includes all necessary mounting hardware.<br />
68548-87A Required to install P/N 53465-87B<br />
on ’86-’99 FXSTC, FXSTS,<br />
FXSTSB and FLSTF models. $25.95<br />
E. CHROME MINI LUGGAGE RACK*<br />
52775-71 Can be installed on all sport<br />
models equipped with tall Sissy Bar<br />
uprights, which include XL, FXR, FX,<br />
FXWG, FXD/FXDWG Dyna Glide,<br />
and all <strong>Softail</strong> models. Also fits<br />
’99 FXR models. $65.95<br />
Chrome 4-Channel Luggage Rack*<br />
Attaches to inside of sideplates for an attractive,<br />
factory-installed appearance.<br />
56465-86A Fits ’86-later FLST, FLSTC, FLSTF,<br />
and FLSTN models. (H-D accessory<br />
Sissy Bar Upright and Sideplates<br />
required on ’87-’91 FLSTC and all<br />
FLST, FLSTF, and FLSTN models.)<br />
(Does not fit FLSTS.) NOTE: Does not<br />
fit ’87-’91 FLSTC models equipped<br />
with stock production welded onepiece<br />
Sissy Bar sideplates. (Does<br />
not work with Detachables). $129.95<br />
F. CHROME 3-CHANNEL<br />
LUGGAGE/FENDER RACK*<br />
Includes all necessary mounting hardware.<br />
53461-90* Fits ’86-’02 <strong>Softail</strong> models<br />
equipped with Solo Seat.<br />
’86-’01 <strong>Softail</strong> models require<br />
Directional Relocation Kit P/N<br />
53491-92A. ’02 models require<br />
Directional Relocational Kit<br />
P/N 53859-02A. (Does not<br />
fit FXSTD.) $104.95<br />
FLSTF Fat Boy Directional Extension Kit<br />
(not shown)<br />
Machined directional supports are chrome-plated and<br />
allow for proper installation of Luggage Racks P/N<br />
53461-90 or P/N 53465-87B.<br />
53491-92A Fits ’90-’01 <strong>Softail</strong> models. $24.95<br />
1 *WARNING:<br />
257<br />
<strong>Softail</strong><br />
Chrome Luggage Racks<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as a seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
258<br />
<strong>Softail</strong><br />
Hard Saddlebags<br />
A. HERITAGE SOFTAIL CLASSIC<br />
HARD SADDLEBAG KIT*<br />
The Heritage <strong>Softail</strong> Classic has been turning heads<br />
on the street for years. Now there’s an accessory<br />
option that gives it a new custom look. These lockable,<br />
injection-moulded hard saddlebags are paintedto-match<br />
factory colours and have approximately<br />
20% more total capacity than the Original Equipment<br />
saddlebags used on the Heritage <strong>Softail</strong> when used<br />
with Saddlebag Liners P/N 91778-00.<br />
Fits ’87-later FLSTC models. Fits with Detachable<br />
Sissy Bars and Luggage Racks or with Rigid-Mounted<br />
Sissy Bar. Use Hardware Kit P/N 53075-03 to install<br />
saddlebags on ’03 <strong>Softail</strong> models equipped with<br />
Detachables. Use Hardware Kit P/N 53009-03 to<br />
install saddlebags on ’87-’02 <strong>Softail</strong> models equipped<br />
with Detachables. Installation requires the use of<br />
Narrow Chrome Directional Bar P/N 68611-98 to provide<br />
access to the locks. If equipped with Detachable<br />
Sissy Bar or Luggage Rack, the Narrow Chrome<br />
Directional Bar is not required. Installation on a <strong>Softail</strong><br />
equipped with wide tyre requires the purchase of<br />
Hardware Kit P/N 90299-00. (Note: Will not fit with<br />
Chrome 3-Channel Luggage Rack with Handrail P/N<br />
53831-00 or 53465-87B or Chrome Rear Saddlebag<br />
Guards P/Ns 49158-89D or 49261-00.)<br />
90224-03BDK Primed. $829.95<br />
90224-03BDT Matches ’03 Gunmetal<br />
Pearl FLSTC models. $949.95<br />
90224-03BDP Matches ’03 Sterling<br />
Silver FLSTC models. $999.95<br />
90224-03ZB Matches ’03 White Pearl<br />
FLSTC models. $949.95<br />
90224-03BBN Matches ’02 Real Red<br />
FLSTC models. $949.95<br />
90224-03XE Matches ’01-’03 Luxury<br />
Blue FLSTC models. $949.95<br />
90224-03XF Matches ’01-’02 Jade<br />
Sunglo FLSTC models. $949.95<br />
90224-03XG Matches ’01-’02 Real Teal<br />
FLSTC models. $949.95<br />
90224-03DH Matches ’87-’03 Vivid<br />
Black FLSTC models. $949.95<br />
90224-03KB Matches ’00-’02 Suede<br />
Green FLSTC models. $949.95<br />
90224-03ZQ Matches ’00-’03 Luxury<br />
Rich Red FLSTC models. $949.95<br />
90224-03QB Matches ’00-’01 Chrome<br />
Yellow FLSTC models. $949.95<br />
90224-03QC Matches ’00-’01 Bronze<br />
Pearl FLSTC models. $949.95<br />
90224-03NV Matches ’99-’00 Aztec<br />
Orange Pearl FLSTC models. $949.95<br />
90224-03NR Matches ’98-’00 Sinister<br />
Blue Pearl FLSTC models. $949.95<br />
90224-03DG Matches ’99 and ’95 Nugget<br />
Yellow FLSTC models. $949.95<br />
90224-03LZ Matches ’99 Scarlet<br />
Red FLSTC models. $949.95<br />
90224-03NA Matches ’98-’99 Lazer<br />
Red FLSTC models. $949.95<br />
SOFTAIL HARD SADDLEBAG<br />
HARDWARE KIT (not shown)<br />
90299-00 Required to install Hard<br />
Saddlebags on <strong>Softail</strong> models<br />
equipped with wide rear tyre. $29.95<br />
SOFTAIL HARD SADDLEBAG<br />
HARDWARE KIT<br />
Used to install hard saddlebags on <strong>Softail</strong> models<br />
equipped with Detachables.<br />
53075-03 Required on ’03 <strong>Softail</strong><br />
models equipped with<br />
Detachables (except FXSTD). $24.95<br />
53009-03 Required on ’87-’02 <strong>Softail</strong><br />
models equipped with<br />
Detachables (except FXSTD). $9.95<br />
*NOTE: This product is a “paint to order” accessory.<br />
Please allow an average of 5 weeks delivery for<br />
this item.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE SOFTAIL CLASSIC HARD SADDLEBAGS<br />
B. HARD SADDLEBAGS FOR FAT BOY MODELS
C. SOFTAIL HARD SADDLEBAGS<br />
C. SOFTAIL HARD SADDLEBAG KIT*<br />
These hard saddlebags offer not only lockable storage<br />
convenience, but they provide style with flowing lines<br />
worthy of the <strong>Softail</strong> family. They are injection-moulded<br />
from high-impact composite materials, painted-tomatch<br />
the factory colours and have approximately<br />
20% more total capacity than the Original Equipment<br />
saddlebags used on the Heritage <strong>Softail</strong> when used<br />
with Saddlebag Liners P/N 91778-00.<br />
Fits ’87-’99 FXSTC, ’87-later FXST, FXSTS and FXSTB<br />
models. Fits with Detachable Sissy Bars and Luggage<br />
Racks or with Rigid-Mounted Sissy Bar. Use<br />
Hardware Kit P/N 53075-03 to install saddlebags on<br />
’03 <strong>Softail</strong> models equipped with Detachables. Use<br />
Hardware Kit P/N 53009-03 to install saddlebags ’87-<br />
’02 <strong>Softail</strong> models equipped with Detachables. Will<br />
also fit FLSTF models if exhaust system is changed to<br />
Staggered Duals. Installation on a <strong>Softail</strong> equipped<br />
with wide tyre requires the additional purchase of<br />
Hardware Kit P/N 90299-00. (NOTE: Will not fit with<br />
Chrome 3-Channel Luggage Rack with Handrail P/N<br />
53831-00 or 53465-87B or Chrome Rear Saddlebag<br />
Guards P/Ns 49158-89D or 49261-00.)<br />
90225-03BDK Primed. $829.95<br />
90225-03BDT Matches ’03 Gunmetal Pearl<br />
FXST, FXSTS, FXSTB models. $949.95<br />
90225-03ZB Matches ’03 White Pearl FXST,<br />
FXSTS, FXSTB models. $949.95<br />
90225-03BBP Matches ’02 Impact<br />
Blue FXST models. $949.95<br />
90225-03XE Matches ’01-’03 Luxury Blue FXST,<br />
FXSTB, FXSTS models. $949.95<br />
90225-03XF Matches ’01-’02 Jade Sunglo<br />
FXST, FXSTB, FXSTS models. $949.95<br />
90225-03XG Matches ’01-’02 Real Teal FXST,<br />
FXSTB, FXSTS models. $949.95<br />
90225-03DH Matches ’87-’99 Vivid Black<br />
FXSTC; ’87-’03 Vivid Black FXST,<br />
FXSTS and FXSTB models. $949.95<br />
90225-03QH Matches ’00-’02 Concord Purple<br />
FXST, FXSTS models. $949.95<br />
90225-03ZQ Matches ’00-’03 Luxury Rich<br />
Red FXST, FXSTS models. $949.95<br />
90225-03ZL Matches ’99 FXSTC;<br />
’99-’02 Diamond Ice Pearl<br />
FXST, FXSTS models. $949.95<br />
90225-03NV Matches ’99 FXSTC;<br />
’99-’00 Aztec Orange Pearl<br />
FXST, FXSTS models. $949.95<br />
90225-03NR Matches ’98-’00 Sinister<br />
Blue Pearl FXST, FXSTC,<br />
FXSTS models. $949.95<br />
90225-03ZA Matches ’99 Cobalt Blue<br />
FXSTC, FXSTS models. $949.95<br />
90225-03NA Matches ’98-’99 Lazer Red<br />
FXST, FXSTC, FXSTS models. $949.95<br />
259<br />
<strong>Softail</strong><br />
Hard Saddlebags<br />
B. HARD SADDLEBAGS<br />
FOR FAT BOY MODELS*<br />
Give a leaner look to your Fat Boy with these new hard<br />
saddlebags. You’ll not only get lockable storage convenience,<br />
but you’ll add to the smooth profile of your<br />
<strong>Softail</strong>. The saddlebags are injection-moulded from<br />
high-impact composite materials, painted to match<br />
factory colours and can hold about 20% more gear<br />
than the Original Equipment Heritage <strong>Softail</strong> saddlebags<br />
when used with Saddlebag Liners P/N 91778-00.<br />
Fits ’90-later FLSTF and FLSTN models. Also fits with<br />
Detachables. Use Hardware Kit P/N 53075-03 to<br />
install saddlebags on ’03 <strong>Softail</strong> models equipped<br />
with Detachables. Use Hardware Kit P/N 53009-03 to<br />
install saddlebags ’87-’02 <strong>Softail</strong> models equipped<br />
with Detachables.<br />
90715-03BDK Primed.<br />
90715-03BDT Matches ’03 Gunmetal<br />
$829.95<br />
Pearl FLSTF models.<br />
90715-03BDP Matches ’03 Sterling<br />
$949.95<br />
Silver FLSTF models.<br />
90715-03BBP Matches ’02 Impact<br />
$999.95<br />
Blue FLSTF models.<br />
90715-03BBN Matches ’02 Real Red<br />
$949.95<br />
FLSTF models. $949.95<br />
90715-03ZB Matches ’00-’03 White<br />
Pearl FLSTF models. $949.95<br />
90715-03DH Matches ’90-’03 Vivid<br />
Black FLSTF models. $949.95<br />
90715-03QH Matches ’00-’02 Concord<br />
Purple FLSTF models. $949.95<br />
90715-03ZQ Matches ’00-’03 Luxury<br />
Rich Red FLSTF models. $949.95<br />
90715-03XF Matches ’01-’02 Jade<br />
Sunglo FLSTF models. $949.95<br />
90715-03XE Matches ’01-’03 Luxury<br />
Blue FLSTF models. $949.95<br />
90715-03XG Matches ’01-’02 Real<br />
Teal FLSTF models. $949.95<br />
90715-03QC Matches ’00-’01 Bronze<br />
Pearl FLSTF models. $949.95<br />
90715-03QB Matches ’00-’01 Chrome<br />
Yellow FLSTF models. $949.95<br />
90715-03KB Matches ’00-’01 Suede<br />
Green FLSTF models. $949.95<br />
90715-03ZL Matches ’01 Diamond Ice<br />
Pearl FLSTF models. $949.95<br />
90715-03NV Matches ’99-’01 Aztec<br />
Orange Pearl FLSTF models. $949.95<br />
90715-03LZ Matches ’99 Scarlet<br />
Red FLSTF models. $949.95<br />
90715-03NA Matches ’98-’99 Lazer<br />
Red Pearl FLSTF models. $949.95<br />
90715-03NR Matches ’98-’99 Sinister Blue<br />
Pearl FLSTF models. $949.95<br />
90715-03DG Matches ’95 and ’99 Nugget<br />
Yellow FLSTF models. $949.95<br />
*NOTE: This product is a “paint to order” accessory.<br />
Please allow an average of 5 weeks delivery for<br />
this item.
260<br />
<strong>Softail</strong><br />
Deuce Hard Saddlebags and Liner<br />
A. SOFTAIL DEUCE HARD<br />
SADDLEBAGS*<br />
Among the accessory-friendly features built into the<br />
<strong>Softail</strong> Deuce are pre-drilled holes that make installation<br />
of these unique saddlebags easy and inconspicuous.<br />
These injection-moulded saddlebags have<br />
approximately 20% more total capacity than the<br />
Original Equipment saddlebags used on the Heritage<br />
<strong>Softail</strong> when used with Saddlebag Liners P/N 91778-<br />
00, are lockable and feature a clean surface that<br />
results in ideal painted finish. The patented mounting<br />
system allows you to easily remove the saddlebags<br />
and support system, restoring the Deuce quickly to<br />
the Original Equipment look. Includes a turn signal<br />
relocation kit, all hardware and reflectors.<br />
Fits ’00-later FXSTD models. Can not be used with<br />
Turn Signal Module Kit P/N 68216-00.<br />
90394-00 Primed.<br />
Fits ’00-later FXSTD models. $829.95<br />
90394-03BDT Matches ’03 Gunmetal<br />
Pearl FXSTD models. $949.95<br />
90394-03BDP Matches ’03 Sterling<br />
Silver FXSTD models. $999.95<br />
90394-03BFA Matches ’03 Centennial<br />
Gold FXSTD models. $999.95<br />
90394-03ZB Matches ’03 White Pearl<br />
FXSTD models. $949.95<br />
90394-02BBN Matches ’02 Real<br />
Red FXSTD models. $949.95<br />
90394-01XE Matches ’01-’03 Luxury<br />
Blue FXSTD models. $949.95<br />
90394-01XG Matches ’01-’02 Real<br />
Teal FXSTD models. $949.95<br />
90394-00DH Matches ’00-’03<br />
Vivid Black FXSTD models. $949.95<br />
90394-00ZQ Matches ’00-’03 Luxury<br />
Rich Red FXSTD models. $949.95<br />
90394-00NV Matches ’00 Aztec Orange<br />
Pearl FXSTD models. $949.95<br />
90394-00NR Matches ’00 Sinister<br />
Blue Pearl FXSTD models. $949.95<br />
90394-00ZL Matches ’00-’01 Diamond<br />
Ice Pearl FXSTD models. $949.95<br />
90394-00QH Matches ’00-’02 Concord<br />
Purple FXSTD models. $949.95<br />
B. SADDLEBAG LINERS<br />
FOR SOFTAIL HARD SADDLEBAGS<br />
Custom fit to the <strong>Softail</strong> hard saddlebags, these liners<br />
make packing easier and more efficient and allow you<br />
to take advantage of the 20% larger capacity of the<br />
hard bag. These well constructed, water-resistant<br />
bags are designed to fit right into your saddlebags<br />
and include handy inner storage pockets. They feature<br />
convenient carrying straps and an embroidered Bar &<br />
Shield logo. Sold in pairs.<br />
91778-00 Fits ’00-later <strong>Softail</strong><br />
models equipped with <strong>Softail</strong><br />
Hard Saddlebags. $44.95<br />
*NOTE: This product is a “paint to order” accessory.<br />
Please allow an average of 5 weeks delivery for<br />
this item.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL DEUCE HARD SADDLEBAGS<br />
B. SADDLEBAG LINERS FOR SOFTAIL<br />
HARD SADDLEBAGS<br />
B. SADDLEBAG LINERS FOR SOFTAIL<br />
HARD SADDLEBAGS
C. LEATHER SADDLEBAGS FOR SOFTAIL DEUCE<br />
261<br />
<strong>Softail</strong><br />
Leather Saddlebags<br />
C. LEATHER SADDLEBAGS<br />
FOR SOFTAIL DEUCE<br />
The <strong>Softail</strong> Deuce is well on its way to becoming a<br />
motorcycle classic – and these leather bags will help<br />
complete the journey. Styled to match the Deuce with<br />
chrome buckles, top-grain cowhide and a sleek<br />
“Deuce” logo, these bags feature an ingenious mounting<br />
mechanism that eliminates all visible hardware.<br />
90404-00 Fits ’00-later FXSTD models.<br />
Requires use of Saddlebag Support<br />
Kit P/N 68360-00 and Directional<br />
Relocation Kit P/N 90395-00<br />
for installation. $575.00<br />
SADDLEBAG SUPPORT KIT<br />
FOR SOFTAIL DEUCE (not shown)<br />
Required for the Deuce Bags, this mounting system<br />
eliminates all visible hardware, allowing you to profile<br />
down the highway in style.<br />
68360-00 Fits ’00-later FXSTD models.<br />
Required to install <strong>Softail</strong> Deuce<br />
Saddlebags P/N 90404-00<br />
and 92018-03. Also requires<br />
separate purchase of Directional<br />
Relocation Kit P/N 90395-00<br />
for installation. $185.99<br />
D. LOCKING LEATHER COVERED RIGID<br />
SADDLEBAGS FOR SOFTAIL MODELS<br />
These saddlebags offer a premium leather look with<br />
an extra-durable construction. The blow-moulded<br />
core keeps the bag rigid and prevents sagging, while<br />
the unique lids open outward for added flair. Bags feature<br />
locks for additional security.<br />
53061-00 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD). Fits ’84-’99<br />
<strong>Softail</strong> models with separate<br />
purchase of Directional Relocation<br />
Kit P/N 53692-96. (FLSTC and FLSTS<br />
models do not require this Directional<br />
Relocation Kit.) (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
Does not fit with Rear Axle Covers or<br />
Wide Tyre Kit P/N 43684-99. Does<br />
not fit with Flat Lens Turn Signal<br />
Kit P/N 68431-95 $799.00<br />
NOTE: Installation of these saddlebags with the<br />
following seats requires the use of Spacer Kit P/N<br />
90976-01A: seats with rider backrests, double bucket<br />
seats, diamondback seats, stock FLSTF seat, stock<br />
FLSTC seat, and any other seats that contact the lid of<br />
the saddlebag. Spacer Kit not required if mounting with<br />
<strong>Harley</strong>-Davidson detachable Sissy Bar Sideplates.<br />
Directional Relocation Kit (not shown)<br />
Provides clearance for various <strong>Harley</strong>-Davidson<br />
leather saddlebags and/or luggage racks.<br />
53692-96 Fits ’84-’99 FXST, FXSTC, FXSTS,<br />
FLSTF and FXSTSB. Required<br />
in order to mount Sissy Bar<br />
docking hardware on all ’84-<br />
’99 FXSTSB, FXSTS, FXST,<br />
FXSTC and FLSTF models. $34.95<br />
D. LOCKING LEATHER COVERED RIGID SADDLEBAGS FOR SOFTAIL MODELS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
262<br />
<strong>Softail</strong><br />
Leather Saddlebags<br />
A. ALLIGATOR SADDLEBAGS<br />
FOR SOFTAIL MODELS<br />
Make a statement with these exotic leather bags.<br />
Crafted from premium materials, they feature a genuine<br />
alligator inlay that complements the Exotic Seat<br />
Collection, or looks great on its own. All mounting<br />
brackets, hardware and instructions are included.<br />
Available in U.S. only.<br />
91555-01 Fits all ’00-later <strong>Softail</strong> models (except<br />
FXSTD). Also fits ’84-’99 <strong>Softail</strong> models<br />
equipped with Turn Signal Relocation<br />
Kit P/N 53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Does not fit with Rear Axle Covers or<br />
Wide Tyre Kit P/N 43684-99.) (Does<br />
not fit with Flat Lens Turn Signal<br />
Kit P/N 68431-95.) $799.00<br />
NOTE: Alligator is a natural material. Scale patterns<br />
may vary, this should not be considered a defect.<br />
B. LARGE LEATHER SADDLEBAGS<br />
These saddlebags have plenty of extra room for all of<br />
your accessories and are built for superior durability.<br />
These bags were put through rigorous testing to<br />
ensure the highest quality and are styled with looks<br />
that complement the <strong>Softail</strong> line.<br />
90119-00 Fits ’00-later <strong>Softail</strong> models (except<br />
FLSTF, FXSTD, and models with<br />
shotgun style exhaust). Also fits<br />
’84-’99 FXST models when used<br />
with Directional Relocation Kit P/N<br />
53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Will not fit with Flat Lens Turn Signal<br />
Kit P/N 68431-95, or any Rear Axle<br />
Covers. Does not fit with Wide<br />
Tyre Kit P/N 43684-99.) $599.95<br />
NOTE: These <strong>Harley</strong>-Davidson products are made of<br />
leather. Fine leathers or other natural materials WILL<br />
gain “character,” such as wrinkles or wear, with age.<br />
This is normal. A fine, aged patina and character wrinkles<br />
are a sign of the extremely high quality materials<br />
used to construct your seat, backrest or saddlebags.<br />
The appearance of scars or marks on the leather are<br />
a result of using natural leather panels and should not<br />
be thought of as an imperfection. Please use <strong>Harley</strong>-<br />
Davidson Leather Dressing P/N 98261-91V to protect<br />
your investment.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. ALLIGATOR SADDLEBAGS FOR SOFTAIL MODELS<br />
B. LARGE LEATHER SADDLEBAGS
C. SOFTAIL HARNESS LEATHER SADDLEBAGS – FAT BOY<br />
263<br />
<strong>Softail</strong><br />
Leather Saddlebags<br />
C. SOFTAIL HARNESS LEATHER<br />
SADDLEBAGS – FAT BOY<br />
Fat Boy bags made from high-quality harness leather<br />
and styled to complement your Fat Boy with the<br />
embossed Fat Boy logo.<br />
92000-00B Fits all ’00-later <strong>Softail</strong> models<br />
(except FXSTD). Also fits ’84-’99<br />
FLSTF and FXST models when used with<br />
Directional Relocation Kit P/N 53692-96.<br />
(Does not fit ’84-’99 models equipped<br />
with Detachables.) (Does not fit with<br />
Wide Tyre Kit P/N 43684-99.) (Does<br />
not fit with Flat Lens Turn Signal Kit<br />
P/N 68431-95.) (Does not fit with<br />
Rear Axle Covers.) $699.95<br />
D. LEATHER SADDLEBAGS<br />
FOR FAT BOY MOTORCYCLES<br />
You can take your Twin Cam 88B-equipped Fat Boy a<br />
long way with these large, cavernous bags that provide<br />
for plenty of storage for the long haul. Styled to<br />
match your Fat Boy with Fat Boy logo and braiding.<br />
91536-00 Fits ’00-later <strong>Softail</strong> models (except<br />
FXSTD). Also fits ’84-’99 FLSTF<br />
and FXST models when used<br />
with Directional Relocation Kit<br />
P/N 53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Will not fit with Flat Lens Turn<br />
Signal Kit P/N 68431-95.) (Does<br />
not fit with Rear Axle Covers.) $589.95<br />
NOTE: These <strong>Harley</strong>-Davidson products are made of<br />
leather. Fine leathers or other natural materials WILL<br />
gain “character,” such as wrinkles or wear, with age.<br />
This is normal. A fine, aged patina and character wrinkles<br />
are a sign of the extremely high quality materials<br />
used to construct your seat, backrest or saddlebags.<br />
The appearance of scars or marks on the leather are<br />
a result of using natural leather panels and should not<br />
be thought of as an imperfection. Please use <strong>Harley</strong>-<br />
Davidson Leather Dressing P/N 98261-91V to protect<br />
your investment.<br />
D. LEATHER SADDLEBAGS FOR FAT BOY MOTORCYCLES Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
264<br />
<strong>Softail</strong><br />
Leather Saddlebags<br />
A. SYNTHETIC LEATHER<br />
SADDLEBAGS FOR SOFTAIL MODELS<br />
An exciting new break-through in saddlebags, these<br />
handsome bags are the perfect accessory for your<br />
<strong>Softail</strong>. The large interior leaves plenty of room for all<br />
of your essentials and an inner pocket allows<br />
for quick access to small items such as keys, sunglasses,<br />
and wallets.<br />
91537-00A Fits ’00-later <strong>Softail</strong> models (except<br />
FLSTF, FXSTD, and models with<br />
shotgun style exhaust). Also fits<br />
’84-’99 FXST models when used<br />
with Directional Relocation Kit P/N<br />
53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Will not fit with Flat Lens Turn Signal<br />
Kit P/N 68431-95, or any Rear Axle<br />
Covers. Does not fit with Wide<br />
Tyre Kit P/N 43684-99.) $459.95<br />
B. LEATHER THROW-OVER<br />
SADDLEBAGS FOR SOFTAIL MODELS<br />
With these leather throw-over saddlebags, you get an<br />
economical and convenient storage option for touring<br />
on your <strong>Softail</strong>. Just install the padded yoke under your<br />
passenger seat, and the quick-disconnect saddlebag<br />
attachment straps allow easy on-and-off convenience.<br />
91449-01 Fits all ’00-later <strong>Softail</strong> models<br />
(except FXSTD and FLSTS)<br />
with two-up seats. Solo seats<br />
require installation of passenger<br />
pillion. Requires Chrome<br />
Saddlebag Support Kit P/N<br />
91790-84C. (Will not fit with<br />
Detachable sideplates, racks<br />
or Rear Axle Covers.) $299.95<br />
Chrome Saddlebag Support Kit<br />
Fits with or without Sissy Bar Uprights, attaches<br />
easily, and protects throw-over bags from contacting<br />
brake and swingarm.<br />
91790-84C Fits ’84-later <strong>Softail</strong> models<br />
(except FXSTD and FLSTS).<br />
(Will not fit with Detachable<br />
sideplates or racks.) $49.95<br />
NOTE: These <strong>Harley</strong>-Davidson products are made of<br />
leather. Fine leathers or other natural materials WILL<br />
gain “character,” such as wrinkles or wear, with age.<br />
This is normal. A fine, aged patina and character wrinkles<br />
are a sign of the extremely high quality materials<br />
used to construct your seat, backrest or saddlebags.<br />
The appearance of scars or marks on the leather are<br />
a result of using natural leather panels and should not<br />
be thought of as an imperfection. Please use <strong>Harley</strong>-<br />
Davidson Leather Dressing P/N 98261-91V to protect<br />
your investment.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SYNTHETIC LEATHER SADDLEBAGS FOR SOFTAIL MODELS<br />
B. LEATHER THROW-OVER SADDLEBAGS FOR SOFTAIL MODELS
C. LARGE CAPACITY SOFTAIL LEATHER SADDLEBAGS<br />
265<br />
<strong>Softail</strong><br />
Leather Saddlebags<br />
C. LARGE CAPACITY SOFTAIL<br />
LEATHER SADDLEBAGS<br />
Designed specifically for the new <strong>Softail</strong> configuration,<br />
these bags offer additional room for added storage.<br />
With chrome buckles and a “<strong>Harley</strong>-Davidson” logo,<br />
these bags look as good as they work.<br />
90130-00B Fits all ’00-later <strong>Softail</strong> models without<br />
shotgun style exhaust. (Does not fit<br />
with Wide Tyre Kit P/N 43684-99.)<br />
Also fits ’84-’99 <strong>Softail</strong> models (except<br />
FLSTF and models equipped with<br />
shotgun style exhaust) with the use<br />
of the Directional Turn Signal Relocation<br />
Kit P/N 53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Does not fit with Flat Lens Turn<br />
Signal Kit P/N 68431-95.) (Does<br />
not fit with Rear Axle Covers.) $679.95<br />
D. SOFTAIL LEATHER<br />
SADDLEBAGS – FAT BOY STYLING<br />
Styled to complement the Fat Boy with the distinctive<br />
Fat Boy concho, wider is definitely better when<br />
it comes to these bags, the widest available for<br />
<strong>Softail</strong> models.<br />
90320-00B Fits all ’00-later <strong>Softail</strong> models<br />
(except FXSTD). Also fits ’84-’99<br />
FLSTF and FXST models when used<br />
with Directional Relocation Kit<br />
P/N 53692-96. (Does not fit ’84-’99<br />
models equipped with Detachables.)<br />
(Does not fit with Wide Tyre Kit<br />
P/N 43684-99.) (Does not fit<br />
with Flat Lens Turn Signal Kit<br />
P/N 68431-95.) (Does not fit<br />
with Rear Axle Covers.) $669.95<br />
NOTE: These <strong>Harley</strong>-Davidson products are made of<br />
leather. Fine leathers or other natural materials WILL<br />
gain “character,” such as wrinkles or wear, with age.<br />
This is normal. A fine, aged patina and character wrinkles<br />
are a sign of the extremely high quality materials<br />
used to construct your seat, backrest or saddlebags.<br />
The appearance of scars or marks on the leather are<br />
a result of using natural leather panels and should not<br />
be thought of as an imperfection. Please use <strong>Harley</strong>-<br />
Davidson Leather Dressing P/N 98261-91V to protect<br />
your investment.<br />
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
266<br />
<strong>Softail</strong><br />
Leather Saddlebags and Liners<br />
A. HERITAGE STYLE SADDLEBAG KIT<br />
Top grade cowhide saddlebag is decorated with<br />
chrome studs and three chrome-plated brass medallions<br />
coined with the <strong>Harley</strong>-Davidson Bar & Shield.<br />
Saddlebag tops have rivet-reinforced corners and are<br />
secured with heavy leather straps and roller-type,<br />
easy-access buckles. Necessary hardware and<br />
instructions are included. (Directional Relocation Kit<br />
P/N 68548-87A is necessary for FXST, FXSTB,<br />
FXSTC, FXSTS, FXSTSB models.)<br />
90835-90C Fits ’84-’99 FXST, FXSTC, FXSTS,<br />
and FXSTSB models. Also fits late<br />
’86-’99 FLST and FLSTC models.<br />
Stock on ’94-’99 FLSTC. (Does not<br />
fit FLSTF, FLSTS or FLSTN.) (Does<br />
not fit with Rear Axle Covers.) $699.95<br />
Directional Relocation Kit (not shown)<br />
Includes all necessary mounting hardware.<br />
68548-87A Required to install P/N 53465-87B<br />
on ’86-’99 FXSTC, FXSTS and<br />
FXSTSB models. $25.95<br />
B. SADDLEBAG LINERS FOR<br />
LEATHER SADDLEBAGS<br />
Water-resistant liners make packing easy. Feature<br />
inner pockets for extra storage and an embroidered<br />
Bar & Shield logo.<br />
91957-97 Fits Heritage <strong>Softail</strong> Classic<br />
and Heritage Springer style<br />
saddlebags and Sportster Leather<br />
Saddlebags P/N 90598-96B,<br />
90119-00A and 91537-00A.<br />
(Also fits P/Ns 90130-00B,<br />
90835-90C, 90342-98A,<br />
and 90300-98.) (pair) $44.95<br />
C. SADDLEBAG LINERS<br />
FOR LEATHER SADDLEBAGS<br />
Water-resistant liners make packing easy. Features<br />
include inner pockets for extra storage and an embroidered<br />
Bar & Shield logo.<br />
91956-97 Fits Fat Boy Saddlebags<br />
P/Ns 90320-00A, 90697-96,<br />
90831-91, 90833-90B, 90975-96,<br />
90975-95, 90973-95, 53061-00,<br />
91555-01, 91536-00A,<br />
92000-00B and 92015-03 (pair) $44.95<br />
91958-97 Fits with Saddlebags<br />
P/Ns 90901-95, 90130-00A,<br />
90990-95, 91190-97.<br />
Also fits ’02-later VRSC<br />
Hard Saddlebags. $44.95<br />
D. SADDLEBAG LINERS<br />
FOR SOFTAIL HARD SADDLEBAGS<br />
Custom fit to the <strong>Softail</strong> hard saddlebags, these liners<br />
make packing easier and more efficient and allow you<br />
to take advantage of the 20% larger capacity of the<br />
hard bag. These well constructed, water-resistant<br />
bags are designed to fit right into your saddlebags<br />
and include handy inner storage pockets. They feature<br />
convenient carrying straps and an embroidered Bar &<br />
Shield logo. Sold in pairs.<br />
91778-00 Fits ’00-later <strong>Softail</strong> models<br />
equipped with <strong>Softail</strong><br />
Hard Saddlebags. $44.95<br />
E. SQUARE SADDLEBAG COOLER<br />
Turn your saddlebag into a refrigerator. The insulating<br />
liner keeps cold in, and the convenient zipper closure<br />
makes packing easy. The square shape fits easily into<br />
most hard and soft saddlebags and has room for up<br />
to twelve 12 oz. soda cans.<br />
94185-01 Fits ’93-later Touring models<br />
equipped with stock saddlebags,<br />
’86-later FLSTC and ’97-later<br />
FLSTS models equipped with<br />
stock leather saddlebags. $39.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE STYLE SADDLEBAG KIT<br />
B. SADDLEBAG LINERS<br />
FOR LEATHER SADDLEBAGS<br />
D. SADDLEBAG LINERS FOR SOFTAIL<br />
HARD SADDLEBAGS<br />
C. SADDLEBAG LINERS FOR<br />
LEATHER SADDLEBAGS<br />
E. SQUARE SADDLEBAG COOLER
F. SOFT BAG LOCK<br />
4<br />
5<br />
2<br />
G. SISSY BAR UPRIGHT SELF-ADHESIVE<br />
MEDALLIONS AND INSERT<br />
I. HERITAGE SPRINGER<br />
SADDLEBAG REFLECTOR KIT<br />
7<br />
6<br />
1<br />
3<br />
H. SADDLEBAG MEDALLIONS<br />
J. HERITAGE SPRINGER<br />
SADDLEBAG ORNAMENT KIT<br />
267<br />
<strong>Softail</strong><br />
Soft Bag Locks<br />
F. SOFT BAG LOCK<br />
Finally, a simple theft deterrent for soft saddlebags<br />
that eliminates the need for constant emptying or worrying<br />
about your belongings. This ingenuous set<br />
includes four individual stylised locks and two keys.<br />
Fits most soft bags with 1-1/2" to 2" wide buckle-style<br />
straps. (Does not work with quick-disconnect buckles.)<br />
Patent pending. (Shown on <strong>Softail</strong> Saddlebag<br />
P/N 90130-00A.)<br />
46109-98 $39.95<br />
G. SISSY BAR UPRIGHT<br />
SELF-ADHESIVE MEDALLIONS<br />
Made In U.S.A. Eagle<br />
1. 99000-77 Large Medallion. $16.95<br />
2. 32510-77 Small Medallion. $10.95<br />
Bar & Shield<br />
3. 91815-85 Large Medallion. $15.50<br />
4. 91816-85 Small Medallion. $10.00<br />
Eagle With Feathered Wings<br />
5. 91811-85 Large Medallion. $14.95<br />
6. 91810-85 Small Medallion. $10.00<br />
Installation Tips: Clean the surface by rubbing<br />
(ISOPROPYL) alcohol on it. Position medallion and<br />
press firmly in place. Let set for 24 hours.<br />
Sissy Bar Upright Insert<br />
Fits Low and Tall Insert-Style H-D Sissy Bar Uprights.<br />
7. 91807-85 Eagle with Feathered Wings. $27.95<br />
H. SADDLEBAG MEDALLIONS<br />
These chrome-plated brass medallions, coined with<br />
the <strong>Harley</strong>-Davidson Bar & Shield logo, have six<br />
mounting prongs for use in a wide variety of applications.<br />
90471-90 Left Medallion. $6.25<br />
90470-90 Right Medallion. $6.25<br />
I. HERITAGE SPRINGER<br />
SADDLEBAG REFLECTOR KIT<br />
A classic addition to the Heritage Springer saddlebags.<br />
These stock FLSTS saddlebag reflectors can be<br />
used on any leather saddlebag.<br />
59269-97 Package of 8. $30.00<br />
J. HERITAGE SPRINGER<br />
SADDLEBAG ORNAMENT KIT<br />
Chrome spots are the final touch for the saddlebags<br />
on the Heritage Springer. FLSTS saddlebags come<br />
with precut holes for mounting, but ornaments can be<br />
used on any leather saddlebag.<br />
59257-97 Package of 8. $37.00<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
268<br />
<strong>Softail</strong><br />
Tour-Paks<br />
A. TOUR-PAK FOR HERITAGE<br />
SOFTAIL CLASSIC MODELS<br />
This Tour-Pak, along with the smooth performance of<br />
the Twin Cam 88B engine, suddenly makes the<br />
Heritage <strong>Softail</strong> Classic the ultimate touring bike. A<br />
cavernous interior will hold one full-face helmet or two<br />
half helmets. Beyond the ample storage, it is also<br />
styled to match your Heritage <strong>Softail</strong> Classic Seat with<br />
chrome spots and concho. Includes backrest pad,<br />
interior rubber mat, hardware, and instructions.<br />
53151-00 Fits ’00-later <strong>Softail</strong> models equipped<br />
with Detachable Tour-Pak Rack P/N 53066-00A.<br />
HDI models require the use of Licence Plate<br />
Relocation Kit P/N 60095-00. $599.00<br />
1 *WARNING:<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.<br />
B. SPORT TOUR-PAK*<br />
Designed to complement the styling of the <strong>Softail</strong><br />
Hard Saddlebags, the colour-matched Sport Tour-Pak<br />
adds increased storage for your ride across town or<br />
across the country. The injection moulded Tour-Pak is<br />
lockable, and includes an interior rubber mat and<br />
mounting hardware. Large enough to store most fullfaced<br />
helmets. Mounts using Detachable Tour-Pak<br />
Mounting Rack P/N 53066-00A (sold separately).<br />
Fits ’00-later <strong>Softail</strong> models (except FXSTD models)<br />
equipped with Detachable Tour-Pak Rack P/N 53066-<br />
00A. (Will not fit with Tour-Pak Rack P/N 53066-00.)<br />
Compatible with hard saddlebags and Original<br />
Equipment Heritage Classic and Heritage Springer<br />
saddlebags. (Not for use with other leather or vinyl<br />
saddlebags.) HDI models require the use of Licence<br />
Plate Relocation Kit P/N 60095-00.<br />
53884-03BDT Matches ’03<br />
Gunmetal Pearl models. $609.95<br />
53884-03BDP Matches ’03<br />
Sterling Silver models. $664.95<br />
53884-01XE Matches ’01-later<br />
Luxury Blue models. $609.95<br />
53884-01XF Matches ’01-’02<br />
Jade Sunglo models. $609.95<br />
53884-01XG Matches ’01-’02<br />
Real Teal models. $609.95<br />
53884-01DH Matches ’00-later<br />
Vivid Black models. $609.95<br />
53884-01QH Matches ’00-’02<br />
Concord Purple models. $609.95<br />
53884-01ZQ Matches ’01-later<br />
Luxury Rich Red models. $609.95<br />
53884-01ZL Matches ’00-’02<br />
Diamond Ice Pearl models. $609.95<br />
53884-01NV Matches ’00<br />
Aztec Orange models. $609.95<br />
53884-01NR Matches ’00<br />
Sinister Blue models. $609.95<br />
53884-01KB Matches ’00-’02<br />
Suede Green models. $609.95<br />
53884-01QB Matches ’00-’01<br />
Chrome Yellow models. $609.95<br />
53884-01QC Matches ’00-’01<br />
Bronze Pearl models. $609.95<br />
53884-02ZB Matches ’00-later<br />
White Pearl models. $609.95<br />
53884-02BBP Matches ’02<br />
Impact Blue models. $609.95<br />
53884-02BBN Matches ’02<br />
Real Red models. $609.95<br />
Shown with:<br />
PASSENGER BACKREST PAD<br />
FOR SPORT TOUR-PAK<br />
This Sport Tour-Pak Backrest Pad is styled to<br />
complement a wide variety of Original Equipment or<br />
custom seats, and provides comfortable support for<br />
your passenger.<br />
52872-01 Fits models equipped with Sport<br />
Tour-Pak P/N 53884-0XXX. $89.95<br />
A. TOUR-PAK FOR HERITAGE SOFTAIL CLASSIC MODELS<br />
B. SPORT TOUR-PAK
C. LEATHER SISSY BAR BAG WITH<br />
BAR & SHIELD CONCHO<br />
E. LEATHER SISSY BAR BAG<br />
WITH CHROME STUDS<br />
G. HERITAGE LEATHER TOURING BAG<br />
D. LEATHER SISSY BAR BAG WITH HERITAGE<br />
SPRINGER BASKETWEAVE PATTERN<br />
AND BLACK TRIM<br />
F. UNIVERSAL LUGGAGE RACK BAG<br />
SISSY BAR BAG FITMENT MATRIX<br />
FITMENT SOFTAIL DYNA SPORTSTER<br />
Low/Tall Sissy Bar Upright<br />
and Pad only Yes Yes Yes<br />
Low/Tall Sissy Bar Upright, Pad<br />
and 4-Channel Rack (56465-86A) Yes No No<br />
Low/Tall Sissy Bar Upright, Pad<br />
and 3-Channel Rack (53465-87B) Yes No No<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Bobtail Rack Yes Yes No<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Sport Rack (53862-00) Yes No No<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Sport Rack (53711-96A) No Yes Yes<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Sport Rack (53899-02) No Yes No<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Sport Rack (53547-91) No Yes No<br />
Low/Tall Sissy Bar Upright,<br />
Pad and Sport Rack (56467-88A) No No Yes<br />
Low/Tall Sissy Bar Upright, Pad<br />
and 2-up Sport Rack Yes Yes Yes<br />
Low Sissy Bar Upright, Pad<br />
and Mini Rack (52775-71) No No No<br />
Tall Sissy Bar Upright, Pad<br />
and Mini Rack (52775-71) Yes Yes Yes<br />
NOTE: Sissy Bar Bag will not work with Mini Rail Sissy<br />
Bar Upright, Short Rail Sissy Bar Upright, VRSC Upright<br />
or FXSTD Upright.<br />
continued from previous page<br />
269<br />
<strong>Softail</strong><br />
Sissy Bar Bags<br />
Shown with:<br />
DETACHABLE TOUR-PAK RACK*<br />
Designed to be installed and removed in less than 60<br />
seconds, this Tour-Pak Rack makes the convenience<br />
and protection of leather an easy on/off proposition.<br />
The ultimate accessory in touring flexibility, this rack<br />
is designed to work with Tour-Pak for Heritage <strong>Softail</strong><br />
Classic P/N 53151-00 and Sport Tour-Pak P/N<br />
53884-0XXX.<br />
53066-00A Fits ’00-later <strong>Softail</strong> models (does<br />
not fit FXSTD). Specifically designed for FLSTC models<br />
(requires Docking Hardware Kit P/N 53822-00). Other<br />
<strong>Softail</strong> models refer to the Detachable Docking<br />
Hardware chart for ’00-later model year. $184.95<br />
C. LEATHER SISSY BAR BAG<br />
WITH BAR & SHIELD CONCHO<br />
This Sissy Bar Bag is an easy way to add extra storage.<br />
High quality moulded-leather construction holds<br />
its shape and is a convenient place to store quickaccess<br />
items. Features a turnbuckle closure for a snug<br />
fit and a die-cast Bar & Shield concho with extra style.<br />
52997-98 Fits most <strong>Harley</strong>-Davidson Sissy Bar<br />
Uprights (see chart). Will not fit with SAC<br />
Luggage Rack Bags. $81.95<br />
D. LEATHER SISSY BAR BAG WITH<br />
HERITAGE SPRINGER BASKETWEAVE<br />
PATTERN AND BLACK TRIM<br />
Inspired by Heritage Springer styling, this bag features<br />
a rich basketweave pattern, black trim, and is a great<br />
addition to any bike. High quality moulded-leather construction<br />
holds its shape and provides a convenient<br />
place to store quick-access items. Features a chrome<br />
turnbuckle closure for a snug fit.<br />
51903-98 Fits most <strong>Harley</strong>-Davidson Sissy Bar<br />
Uprights (see chart). Will not fit<br />
with SAC Luggage Rack Bags. $81.95<br />
E. LEATHER SISSY BAR BAG<br />
WITH CHROME STUDS<br />
This Sissy Bar Bag is an easy way to add extra storage.<br />
High quality moulded-leather construction holds<br />
its shape and is a convenient place to store quickaccess<br />
items. Features a turnbuckle closure for a<br />
snug fit and a concho for extra style.<br />
52998-98 Fits most <strong>Harley</strong>-Davidson Sissy Bar<br />
Uprights (see chart). Will not fit<br />
with SAC Luggage Rack Bags. $81.95<br />
F. UNIVERSAL LUGGAGE RACK BAG<br />
This versatile bag is water-resistant, foam-backed<br />
cordura material that holds its shape and is easy to<br />
install. Features embroidered “<strong>Harley</strong>-Davidson”<br />
script logo and quick-release buckle.<br />
98868-98 Fits <strong>Softail</strong> (except FXSTD), FXDWG<br />
models equipped with H-D Bobtail<br />
fender racks or XL models equipped<br />
with 4-channel luggage racks. $89.95<br />
Bobtail Fender Rack Duffel Bag (not shown)<br />
Constructed of durable vinyl and nylon, this bag features<br />
a convenient carrying handle and chrome tiedown<br />
D-rings on each side.<br />
98835-92 Fits <strong>Softail</strong> (except FXSTD),<br />
FXDWG models equipped with H-D Bobtail fender<br />
racks or XL models equipped with 4-channel<br />
chrome luggage racks. $79.95<br />
G. HERITAGE LEATHER TOURING BAG<br />
Styled to match the FLSTC, the bag features chrome<br />
spots, buckles, and heavy-duty, wide leather straps.<br />
With quick disconnect clips for easy removal and 720<br />
cubic inches of storage space, this bag is as convenient<br />
as it is cavernous.<br />
98864-97 Fits on all <strong>Softail</strong> models<br />
equipped with Luggage Rack P/Ns 53465-87B,<br />
56465-86A or 53713-96. $295.00<br />
1 *WARNING:<br />
Do not use this rack as a seat. Do<br />
not exceed the fender rack weight capacity.<br />
Using as seat or exceeding this capacity could<br />
cause handling problems which could result in<br />
loss of control and death or serious injury.
270<br />
<strong>Softail</strong><br />
SAC Rack Bags<br />
A. SAC RACK BAGS FOR SOFTAIL DEUCE<br />
The perfect accessory for cruising around town or taking<br />
short trips on your <strong>Softail</strong> Deuce. Constructed with<br />
a polyethylene liner to keep out water and help it<br />
retain its shape, this bag carries like a suitcase for<br />
your convenience. Custom designed to fit the <strong>Softail</strong><br />
Deuce Passenger Upright and Rack. 14.0" wide by<br />
10.0" deep by 11.0" tall, the bag features side pockets<br />
for easy access.<br />
Leather<br />
98882-00 Fits ’00-later FXSTD models equipped<br />
with Passenger Sissy Bar Upright<br />
P/N 51114-00 and Luggage Rack<br />
P/N 53806-00 and Passenger Backrest<br />
Pad P/N 52050-00. $259.95<br />
98871-00 Fits ’00-later FXSTD models equipped<br />
with Passenger Sissy Bar Upright P/N<br />
51114-00 and Luggage Rack<br />
P/N 53806-00 and Passenger Backrest<br />
Pads P/N 52549-00 or 51534-00.95<br />
Nylon<br />
98881-00 Fits ’00-later FXSTD models equipped<br />
with Passenger Sissy Bar Upright<br />
P/N 51114-00 and Luggage Rack<br />
P/N 53806-00, and Passenger\Backrest<br />
Pad P/N 52050-00. $139.95<br />
98870-00 Fits ’00-later FXSTD models equipped<br />
with Passenger Sissy Bar Upright P/N<br />
51114-00 and Luggage Rack<br />
P/N 53806-00, and Passenger<br />
Backrest P/Ns 52549-00 and 51534-00.<br />
B. SLIM SAC BAG FOR BACKREST PADS<br />
A handy place to store small items like wallets, cell<br />
phones, glasses, PDAs, and pagers. These compact<br />
bags zip open for easy access and slip over your<br />
backrest for quick installation. Easily removed for<br />
carry-along convenience. Sized to fit your backrest<br />
pad, Slim SAC bags can be installed with or without<br />
luggage racks.<br />
94803-02 Small Backrest.<br />
Fits ’00-later FXSTD models<br />
equipped with Backrest Pad<br />
P/N 51534-00. $89.95<br />
94849-02 Medium Backrest.<br />
Fits ’00-later FXSTD models<br />
equipped with Backrest Pad<br />
P/N 52549-00. $89.95<br />
94850-02 Touring Backrest.<br />
Fits ’00-later FXSTD models<br />
equipped with Backrest Pad<br />
P/N 52050-00. $99.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SAC RACK BAG FOR SOFTAIL DEUCE<br />
NEW<br />
B. SLIM SAC BAG FOR BACKREST PADS
C. LEATHER WINDSHIELD BAG<br />
WITH BAR & SHIELD LOGO<br />
E. FAT BOY WINDSHIELD BAG<br />
WITH DIE-CAST CONCHO<br />
G. WINDSHIELD BAG WITH LEATHER<br />
EMBOSSED LOGO<br />
D. HERITAGE SPRINGER LEATHER<br />
WINDSHIELD BAG<br />
F. FAT BOY WINDSHIELD BAG<br />
H. SOFTAIL CUSTOM/DYNA WIDE<br />
GLIDE LEATHER FORK BAG<br />
271<br />
<strong>Softail</strong><br />
Windshield Bags<br />
C. LEATHER WINDSHIELD BAG<br />
WITH BAR & SHIELD LOGO<br />
Extra storage. Extra style. Extra miles.<br />
Accented with decorative chrome studs and an<br />
embossed Bar & Shield logo. Easy to install on models<br />
equipped with King-Size windshields.<br />
58298-87 Matches FLSTC models.<br />
Does not fit with 100th Anniversary<br />
Logo Accessory Windshields. $65.95<br />
D. HERITAGE SPRINGER LEATHER<br />
WINDSHIELD BAG – BLACK TRIM<br />
Convenience with Heritage Springer styling. Easy to<br />
install.<br />
52931-99 Fits all H-D King-Size and Compact<br />
Windshields (except FXSTD) on models<br />
without handlebar-mounted gauges.<br />
Does not fit with 100th Anniversary<br />
Logo Accessory Windshields. $79.95<br />
E. FAT BOY WINDSHIELD BAG<br />
WITH DIE-CAST CONCHO<br />
With a Fat Boy logo concho and a leather laced lid, this<br />
bag provides classic Fat Boy style and convenient storage.<br />
It’s the ideal accessory for Fat Boy Saddlebags<br />
P/N 90381-98, 91536-00A and 90320-00B.<br />
56626-99 Fits all ’84-later <strong>Softail</strong> models<br />
equipped with H-D King-Size and<br />
Compact Windshields without<br />
handlebar rise-mounted gauges.<br />
Does not fit with 100th Anniversary<br />
Logo Accessory Windshields. $79.95<br />
F. FAT BOY WINDSHIELD BAG<br />
This windshield bag, designed to match the Fat Boy<br />
seat and tank panel, is made of black U.S.<br />
steerhide. Features an embossed Fat Boy logo and a<br />
hand-laced leather lid.<br />
58307-95 Fits FLSTF, FLSTC, FLSTN,<br />
FLH and FLHR models equipped<br />
with H-D King-Size Windshields.<br />
Does not fit with 100th Anniversary<br />
Logo Accessory Windshields. $64.95<br />
G. WINDSHIELD BAG WITH<br />
LEATHER EMBOSSED LOGO<br />
The perfect accessory for small items such as keys,<br />
sunglasses and cell phones, this windshield bag<br />
includes a moulded shell with an embossed Bar &<br />
Shield logo. An apache leather flap wraps snugly<br />
around the shell to help keep contents dry and safe.<br />
56629-00 Fits models equipped<br />
with H-D Compact or King-Size<br />
Windshield Kits without<br />
handlebar-mounted gauges.<br />
Does not fit with 100th Anniversary<br />
Logo Accessory Windshields. $59.95<br />
H. SOFTAIL CUSTOM/DYNA<br />
WIDE GLIDE LEATHER FORK BAG<br />
Sized to fit models with wide forks. Features embroidered<br />
Bar & Shield logo and full-length Velcro closure<br />
over zipper. The inside is plushly lined.<br />
91782-95 Fits ’84-later FXST <strong>Softail</strong><br />
models (except Springer<br />
models and FXSTD) and<br />
’93-later Dyna Wide Glide<br />
models. (Does not fit with Engine<br />
Guard P/N 49016-72D.) $54.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
272<br />
<strong>Softail</strong><br />
Dash Panel and Tank Bras<br />
A. CHROME DASH PANEL EXTENSION<br />
FOR SOFTAIL MODELS<br />
Stretch the lines of your chrome dash panel the full<br />
length of the fuel tank. This chrome plated trim kit<br />
continues the lines and finishes of your standard tank<br />
panel to the front of the seat, adding a custom touch<br />
without the expense of a custom tank. From the workshop<br />
of Wyatt Fuller.<br />
71283-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD models). $39.95<br />
B. TANK BRA FOR<br />
SOFTAIL DEUCE MODELS<br />
Protect your fuel tank from scratches caused by keys,<br />
belt buckles and road debris. This tank bra is made<br />
with non-abrasive, fleece backed vinyl and features an<br />
embroidered Bar & Shield logo. You get easy installation<br />
and a custom fit without having to remove the<br />
tank or seat.<br />
61939-01 Fits ’00-later FXSTD models. $24.95<br />
C. TANK BRA<br />
This tank bra is made with non-abrasive, fleece<br />
backed vinyl material and features an embroidered<br />
Bar & Shield logo. It protects your fuel tank from<br />
scratches from keys, belt buckles and other objects.<br />
Designed for easy installation and a custom fit without<br />
disassembly of the tank or seat.<br />
57799-00 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD) and ’93-later<br />
FXDWG models. $24.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME DASH PANEL EXTENSION FOR SOFTAIL MODELS<br />
B. TANK BRA FOR SOFTAIL DEUCE MODELS<br />
C. TANK BRA
D. LEATHER TANK PANEL<br />
WITH FAT BOY CONCHO<br />
E. LEATHER TANK PANEL WITH CHROME SPOTS<br />
F. TEXTURED LEATHER TANK PANEL G. LEATHER TANK PANEL<br />
WITH EMBOSSED SKULL LOGO<br />
H. ALLIGATOR TANK PANEL<br />
FOR SOFTAIL MODELS<br />
I. HARLEY-DAVIDSON<br />
DASHINATOR COLLECTION<br />
273<br />
<strong>Softail</strong><br />
Tank Panels<br />
D. LEATHER TANK PANEL<br />
WITH FAT BOY CONCHO<br />
Give your <strong>Softail</strong> additional attitude with this leather<br />
tank panel featuring an authentic Fat Boy concho.<br />
91134-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD) and ’93-later<br />
FXDWG models. $47.95<br />
E. LEATHER TANK PANEL<br />
WITH CHROME SPOTS<br />
Replace your Original Equipment tank strip with this<br />
leather panel, spotted in shimmering chrome. The<br />
chrome spots and concho are styled to match your<br />
Heritage <strong>Softail</strong> Classic.<br />
91129-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD) and ’93-later<br />
FXDWG models. $47.95<br />
F. TEXTURED LEATHER TANK PANEL<br />
Complete the look with this textured insert that<br />
matches <strong>Softail</strong> Two-Up Custom Seat P/N 52850-97.<br />
61506-97 Fits ’90-’99 <strong>Softail</strong> models. $49.95<br />
G. LEATHER TANK PANEL<br />
WITH EMBOSSED SKULL LOGO<br />
Add a little menace to your bike with this skullembossed<br />
leather tank panel.<br />
91001-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD) and ’93-later<br />
FXDWG models. $39.95<br />
H. ALLIGATOR TANK PANEL<br />
FOR SOFTAIL MODELS<br />
Bring the bayou to your bike with this genuine<br />
alligator tank panel. (Available in U.S. only.)<br />
61060-01 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD). $139.95<br />
NOTE: Alligator is a natural material. Scale pattern<br />
may vary, this should not be considered a defect.<br />
I. HARLEY-DAVIDSON<br />
DASHINATOR COLLECTION<br />
As a rider there is probably no part of your bike you<br />
see more than your dash and tank console. Thanks to<br />
our Dashinator Collection, it’s also the easiest part of<br />
your bike to change. Dashinator dash and tank consoles<br />
come in a stylish assortment of textured metal,<br />
full-grain cowhide and custom RoadShades colours,<br />
that blend with the latest Motor Company paint<br />
schemes. Available only from <strong>Harley</strong>-Davidson.<br />
Refer to the Multi-Fit section<br />
for a complete listing of Dashinator<br />
Collection colour options.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
274<br />
<strong>Softail</strong><br />
Tank Panels with Pouches<br />
A. LEATHER TANK PANEL WITH<br />
POUCH AND BAR & SHIELD CONCHO<br />
Matches Diamond Back Collection.<br />
91187-97 Fits ’84-’99 <strong>Softail</strong> models. $69.95<br />
B. LEATHER TANK PANEL WITH POUCH,<br />
HERITAGE SPRINGER BASKETWEAVE<br />
PATTERN AND BLACK TRIM<br />
Featuring the Heritage Springer basketweave pattern<br />
and black trim, this panel puts a convenient storage<br />
pouch right in front of you. Its nostalgic styling and<br />
sturdy leather construction are a great addition to any<br />
<strong>Softail</strong>. The pouch is for extra storage. The basketweave<br />
is for extra style and matches the Original Equipment<br />
pattern and trim of stock Heritage Springer models.<br />
Fits ’93-later FXDWG, ’00-later <strong>Softail</strong> models (except<br />
FXSTD).<br />
61770-00 With Black Trim. $72.95<br />
C. LEATHER TANK PANEL WITH POUCH,<br />
CONCHO AND BRAIDED FLAP<br />
91408-00 Fits ’93-later FXDWG and ’00-later<br />
<strong>Softail</strong> models (except FXSTD). $69.95<br />
91173-97 Fits ’84-’99 <strong>Softail</strong> models. $69.95<br />
D. LEATHER TANK PANEL<br />
WITH POUCH AND BRAIDED TRIM<br />
This decorative, yet durable, leather panel has an integrated<br />
storage pouch, perfect for those small items<br />
you like to keep handy. Constructed of tough steerhide<br />
over a rigid, moulded base and decorated with<br />
H-D concho and braided leather lacing.<br />
91409-00 Fits ’93-later FXDWG and ’00-later<br />
<strong>Softail</strong> models (except FXSTD). $69.95<br />
91026-94A Fits ’84-’99 <strong>Softail</strong> models. $69.95<br />
E. LEATHER TANK PANEL<br />
WITH POUCH AND STUDS<br />
Decorate your tank with this durable leather panel that<br />
has an integrated storage pouch perfect for those<br />
small items you like to keep handy. Constructed of<br />
tough steerhide over a rigid, moulded base and decorated<br />
with H-D concho and bright studs.<br />
91022-94A Fits all ’84-’99 <strong>Softail</strong> models. $69.95<br />
F. LEATHER TANK PANEL WITH POUCH,<br />
CONCHO AND CHROME STUDS<br />
Matches Dashinator Collection.<br />
91407-00 Fits ’93-later FXDWG and ’00-later<br />
<strong>Softail</strong> models (except FXSTD). $69.95<br />
91177-97 Fits ’84-’99 <strong>Softail</strong> models. $69.95<br />
G. LICENCE PLATE BAG<br />
The perfect accessory for storing small items, this bag<br />
mounts quickly to the licence plate bracket of your<br />
motorcycle. A zippered pocket and embroidered<br />
“<strong>Harley</strong>-Davidson” logo add the finishing touch.<br />
64267-00 Fits XL, Dyna, and <strong>Softail</strong> models<br />
without Bobtail fenders or luggage<br />
racks. (Does not fit with Layback<br />
Licence Plate Mounting Kit<br />
P/Ns 59817-00A or 59822-00.) $49.95<br />
H. FAT BOY LEATHER TOOLBOX<br />
Braided leather valance, chrome eyelets and Fat Boy<br />
styling with the convenience and durability of leather<br />
construction.<br />
Left Side<br />
64219-96 Fits ’84-later <strong>Softail</strong> models (except<br />
FLSTC, FLSTS and FXSTD models or<br />
models equipped with <strong>Harley</strong>-Davidson<br />
Dual Fishtail Exhaust System P/N 65281-<br />
92B or Dual Exhaust P/N 65281-96).<br />
’00-later <strong>Softail</strong> models require use of<br />
footboards or Footpeg Extension Kit P/N<br />
49352-00. (Will not fit with FLSTC<br />
and FLSTS or saddlebags.) $104.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. LEATHER TANK PANEL WITH POUCH<br />
AND BAR & SHIELD CONCHO<br />
C. LEATHER TANK PANEL WITH POUCH,<br />
CONCHO AND BRAIDED FLAP<br />
E. LEATHER TANK PANEL WITH<br />
POUCH AND STUDS<br />
B. LEATHER TANK PANEL WITH POUCH,<br />
HERITAGE SPRINGER BASKETWEAVE<br />
PATTERN AND BLACK TRIM<br />
D. LEATHER TANK PANEL WITH<br />
POUCH AND BRAIDED TRIM<br />
F. LEATHER TANK PANEL WITH POUCH,<br />
CONCHO AND CHROME STUDS
G. LICENCE PLATE BAG H. FAT BOY LEATHER TOOLBOX – LEFT SIDE<br />
I. SOFTAIL LEATHER TOOL BOX J. SOFTAIL AIR DAM TOOLBOX<br />
275<br />
<strong>Softail</strong><br />
Chrome and Leather Tool Boxes<br />
I. SOFTAIL LEATHER TOOL BOX<br />
Decorated with embossed Bar & Shield logo, this custom<br />
leather tool box features a top-mounted zipper<br />
that provides easy access and a full-length Velcro<br />
secured leather cover. It is manufactured from durable,<br />
full grain, U.S. black steerhide that is stitched to a highdensity<br />
moulded back for long-lasting structural durability<br />
and shape retention. All necessary mounting<br />
hardware included.<br />
64260-00 Right side. (shown)<br />
Fits ’00-later <strong>Softail</strong> models (except FLSTC,<br />
FLSTS and FXSTD). Requires Spacer Kit<br />
P/N 49352-00 if used with passenger footpegs.<br />
Not required for Passenger Footboards. $99.95<br />
64262-00 Left side.<br />
Fits ’84-later <strong>Softail</strong> models (except FLSTC,<br />
FLSTS and FXSTD). Fits ’00-later <strong>Softail</strong> models<br />
(except FLSTC, FLSTS and FXSTD). Requires Spacer<br />
Kit P/N 49352-00 if used with passenger footpegs.<br />
Not required for Passenger Footboards. $99.95<br />
J. SOFTAIL AIR DAM TOOLBOX<br />
This functional chrome-plated toolbox fits between<br />
the frame tubes on <strong>Softail</strong> models. The removable lid<br />
provides inconspicuous storage space for tools.<br />
91530-98 Fits ’92-’99 <strong>Softail</strong> models.<br />
(Does not fit FXSTC/FXSTS models equipped with<br />
Engine Guard P/N 49016-72D or FXSTC/FXSTS<br />
models with Engine Guard P/N 49004-90 and<br />
Extended Reach Forward Control Kit P/N 49163-91.)<br />
(Does not fit FXSTD.) $79.95<br />
K. SOFTAIL CHROME TOOLBOXES<br />
Includes chrome-plated mounting brackets and<br />
barrel-style locks with keys. (Does not fit <strong>Softail</strong> models<br />
equipped with Dual Fishtail Exhaust System P/N<br />
65281-92B or P/N 65281-96.)<br />
64938-00 Left Side.<br />
Fits ’00-later FLSTF, FXST, FXSTB and FXSTS models.<br />
Requires Spacer Kit P/N 49352-00 if used with Original<br />
Equipment passenger footpegs. Not required with<br />
Passenger Footboards P/N 50602-00. $87.95<br />
64937-00 Right Side.<br />
Fits ’00-later FXST, FXSTB, FXSTS, FLSTC and FLSTS<br />
models. Requires Spacer Kit P/N 49352-00 if used with<br />
Original Equipment passenger footpegs. Not required<br />
with Passenger Footboards P/Ns 50955-00 and 50602-<br />
00. ’00-later FLSTC models require Saddlebag<br />
Relocation Kit P/N 90238-00 with Original<br />
Equipment footpegs or footboards. $87.95<br />
64215-97 Right side.<br />
Fits ’97-’99 FLSTS models. $87.95<br />
64207-89B Left Side.<br />
Fits all ’84-’99 <strong>Softail</strong> models including ’90-later<br />
FLSTC/FLSTN models. (Does not fit FLSTS.)<br />
(Will not work with Dual Fishtail Exhaust<br />
P/N 65281-92B or Dual Exhaust P/N 65281-96.)<br />
Replacement Key P/N 64204-96. $87.95<br />
64201-85C Right Side.<br />
Fits ’84-’99 <strong>Softail</strong> models (except FLSTF, FLSTN<br />
and FLSTS models.) This right side toolbox will work<br />
with Dual Fishtail Exhaust. (’90-later FLSTC models<br />
require Toolbox Relocation Kit P/N 64210-90A.)<br />
Replacement Key P/N 64204-96. $87.95<br />
Hex Spacer kit (not shown)<br />
This kit is specifically required for Toolbox P/Ns<br />
64937-00, 64938-00 or 64219-96 when used with<br />
passenger footpegs. Not required with Passenger<br />
Footboard P/Ns 50955-00 and 50602-00.<br />
49352-00 $9.95<br />
NOTE: Replacement lock for <strong>Softail</strong> Chrome<br />
Toolboxes P/N 45797-99.<br />
L. SOFTAIL TOOLBOX LINER<br />
Made of tough 1000 denier nylon with silk-screened<br />
Bar & Shield logo. Features a full-length zipper and<br />
two elastic straps to secure several tools.<br />
91838-92 Fits both left and<br />
right side toolboxes. $16.95<br />
K. SOFTAIL CHROME TOOLBOXES L. SOFTAIL TOOLBOX LINER Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
276<br />
<strong>Softail</strong><br />
Mud Flaps and Soft Lowers<br />
A. STUDDED REAR FENDER MUD FLAP<br />
Black mud flap with accenting decorative studs.<br />
59230-88 Fits FLST, FLSTF, FLSTN, FLHT, FLHS,<br />
FLHR, FLT, FLHT and ’98-later FLTR<br />
models. (Does not fit models with<br />
Rear Bumper Rail.) $19.95<br />
B. HERITAGE SOFTAIL CLASSIC<br />
REAR FENDER LEATHER MUD FLAP<br />
Get nostalgic with top-grain cowhide decorated with<br />
bright spots and a Heritage-style concho. A perfect<br />
match with your Heritage saddlebags. Kit includes<br />
installation hardware and template.<br />
59071-98 Fits all FLSTC models. $49.95<br />
C. FAT BOY REAR FENDER MUD FLAP<br />
Top grain cowhide is decorated with a Fat Boy textured<br />
imprint and lacing that perfectly matches your<br />
Fat Boy seat and Fat Boy accessories. Kit includes<br />
hardware, instructions and installation template.<br />
59707-98 Fits all FLSTF models,<br />
rear fender only. (Does not fit<br />
with H-D Fat Boy rear<br />
fender tip trim pieces.) $49.95<br />
D. EAGLE WING MUD FLAP<br />
The two-colour eagle wing logo is moulded on sturdy<br />
black rubber. Includes mounting hardware.<br />
59331-96 Fits FLSTC and FLSTN models. $16.95<br />
E. HERITAGE SPRINGER LEATHER<br />
MUD FLAP WITH FRINGE AND BLACK TRIM<br />
Made from premium, plated leather with black trim,<br />
these flaps have fringe and an FLSTS concho and<br />
black trim. Includes chrome hardware, support<br />
bracket and fender mounting template.<br />
Fits ’97-later FLSTS models front or rear fender. Also<br />
fits ’86-later FLSTC, FLSTN and FLSTF models, rear<br />
fender only.<br />
59027-99 With Black Trim. $49.95<br />
F. BAR & SHIELD LOGO SOFT LOWERS<br />
Sturdy front engine guard soft lowers feature a durable<br />
quick release buckle attachment for added convenience.<br />
58562-96 Fits ’86-’01 FL <strong>Softail</strong> models<br />
equipped with Engine Guard<br />
P/Ns 49004-90 or 49004-00.<br />
(Cannot be used with Extended<br />
Reach Brake Pedal Kits<br />
P/N 42676-02 and 42640-03.) $59.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. STUDDED REAR FENDER MUD FLAP B. HERITAGE SOFTAIL CLASSIC<br />
REAR FENDER LEATHER MUD FLAP<br />
C. FAT BOY REAR FENDER MUD FLAP D. EAGLE WING MUD FLAP<br />
E. HERITAGE SPRINGER LEATHER MUD FLAP<br />
WITH FRINGE WITH BLACK TRIM<br />
F. BAR & SHIELD LOGO SOFT LOWERS
G. TWO-UP SEAT RAIN COVER<br />
277<br />
<strong>Softail</strong><br />
Seat Covers<br />
G. TWO-UP SEAT RAIN COVER*<br />
Featuring a handy storage sack, this black nylon,<br />
water-resistant, cordura cover packs easily and<br />
shelters your seat from the storm.<br />
51637-97 Fits all H-D Two-Up Seats<br />
(except FLSTS and <strong>Softail</strong> Seats<br />
with Rider Backrests). $29.95<br />
H. SOLO SEAT RAIN COVER*<br />
Featuring a handy storage sack, this black nylon,<br />
water-resistant, cordura cover packs easily and<br />
shelters your seat from the storm.<br />
51638-97 Fits all H-D solo seats<br />
(except FLSTS). $29.95<br />
I. TOURING SEAT RAIN COVER*<br />
Featuring a handy storage sack, this black nylon,<br />
water-resistant, cordura cover packs easily and<br />
shelters your seat from the storm.<br />
51639-97 Fits all FLSTS and H-D touring<br />
seats without rider backrest. $29.95<br />
H. SOLO SEAT RAIN COVER I. TOURING SEAT RAIN COVER Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
1 *WARNING:<br />
Do not use while riding; could<br />
result in death or serious injury.
278<br />
<strong>Softail</strong><br />
Front Spoilers<br />
A. SOFTAIL COLOUR-MATCHED<br />
FRONT SPOILER<br />
This colour-matched front spoiler is made from injection-moulded,<br />
high impact composite materials and<br />
styled for a racy, custom appearance. Finished with<br />
the same high quality paint as all stock <strong>Harley</strong>-<br />
Davidson products to match your original factory<br />
applied colour. Also available primed, ready for your<br />
custom paint design. Includes the necessary hardware<br />
for quick and easy installation.<br />
Refer to the Colour Shop section for<br />
a complete listing of colour options<br />
and additional fitment information.<br />
B. BULLET FRONT SPOILER<br />
Add a long, lean, and stretched look without modifying<br />
the frame. The deep chin spoiler flows into side rails<br />
that cover the frame tubes all the way back to the<br />
swingarm. The colour-matched combination adds visual<br />
length to the bike, covers frame hardware, and creates<br />
a moulded frame effect. Easy to install, this kit contains<br />
all necessary mounting hardware.<br />
Fits ’01-later FXST, FXSTS, FXSTB, and FXSTD models.<br />
57039-03BDK Primed. $254.95<br />
57039-03BDT Matches ’03 Gunmetal Pearl<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03BDP Matches ’03 Sterling Silver<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $384.95<br />
57039-03BBN Matches ’02 Real Red<br />
FXSTD models. $354.95<br />
57039-03XE Matches ’01-’03 Luxury Blue<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03XG Matches ’01-’02 Real Teal<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03DH Matches ’01-later Vivid Black<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03ZQ Matches ’01-’03 Luxury<br />
Rich Red FXST, FXSTS,<br />
FXSTB, FXSTD models. $354.95<br />
57039-03ZL Matches ’01 Diamond Ice<br />
Pearl FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03QH Matches ’01-’02 Concord<br />
Purple FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03ZB Matches ’01-’03 White Pearl<br />
FXST, FXSTS, FXSTB,<br />
FXSTD models. $354.95<br />
57039-03XF Matches ’01-’02 Jade Sunglo<br />
FXST, FXSTS, FXSTB models. $354.95<br />
57039-03BBP Matches ’02 Impact Blue FXST,<br />
FXSTS, FXSTB models. $354.95<br />
57039-03QC Matches ’01 Bronze Pearl<br />
FXST, FXSTS, FXSTB and<br />
FXSTD models. $354.95<br />
C. SOFTAIL CHROME FRONT SPOILER<br />
This spoiler is manufactured from injection-moulded,<br />
high impact materials, and finished with a bright,<br />
mirror polished chrome. The kit includes all hardware<br />
for installation.<br />
57101-01 Fits ’01-later <strong>Softail</strong> models. Fits with<br />
all Engine Guards. Will not fit with<br />
Chrome Voltage Regulator Cover.<br />
57083-01 Fits ’00 <strong>Softail</strong> models. Fits with all<br />
Engine Guards. Will not fit with Chrome<br />
Voltage Regulator Cover. $184.95<br />
57085-01 Fits ’93-’99 <strong>Softail</strong> models. Fits with<br />
Chrome Voltage Regulator Cover<br />
P/N 74578-97. Fits FLSTC, FLSTF,<br />
FLSTN and FLSTS models with Engine<br />
Guard P/N 49004-90. Will not fit FXST,<br />
FXSTC, FXSTB, FXSTS or FXSTSB<br />
models equipped with Engine Guard<br />
P/N 49016-72D, or Engine Guard P/N<br />
49004-90 and Adaptor Bracket P/N<br />
49164-93, or Extended Reach Forward<br />
Control Kit P/N 49163-91. $174.95<br />
A. SOFTAIL COLOUR-MATCHED FRONT SPOILER<br />
NEW<br />
B. BULLET FRONT SPOILER<br />
C. SOFTAIL CHROME FRONT SPOILER
D. CHROME ENGINE KIT FOR TWIN CAM 88B-EQUIPPED SOFTAIL MODELS<br />
279<br />
<strong>Softail</strong><br />
Engine Kits<br />
D. CHROME ENGINE KIT FOR<br />
TWIN CAM 88B-EQUIPPED<br />
SOFTAIL MODELS<br />
Upgrade your silver-polished motor with the brilliance<br />
of chrome. Kit includes the rocker housings and rocker<br />
covers, tappet cover, dipstick, transmission top and<br />
side cover, outer primary, derby cover, coil cover, cam<br />
cover and all necessary gaskets.<br />
16318-01A Fits ’01-later <strong>Softail</strong> models. $899.95<br />
E. BLACK ENGINE KIT FOR<br />
TWIN CAM 88B-EQUIPPED SOFTAIL MODELS<br />
Black is indisputably among the favourite <strong>Harley</strong>-<br />
Davidson colours, making it an ideal place to start<br />
customising your ride. These black powder-coated<br />
engine covers are an easy way to convert your<br />
engine to a striking black wrinkle finish. Kit includes<br />
the rocker housing and rocker cover, transmission<br />
top and side cover, inner and outer primary, derby<br />
cover, inspection cover, coil cover, cam cover, air<br />
cleaner cover, horn cover and all necessary gaskets.<br />
16319-01A Fits ’01-later <strong>Softail</strong> models. $799.95<br />
E. BLACK ENGINE KIT FOR TWIN CAM 88B-EQUIPPED SOFTAIL MODELS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
280<br />
<strong>Softail</strong><br />
Chrome Covers<br />
A. CHROME INNER PRIMARY COVER<br />
Because all components in this cover are exactly like<br />
the Original Equipment part, you can be sure this<br />
cover will match your outer cover, right down to the<br />
high quality, hexavalent chrome-plating. It completes<br />
the look of your powertrain without the hassle of troublesome<br />
exchange programs. This cover includes all<br />
bearings, dowel pins and seals already installed, to<br />
ensure <strong>Harley</strong>-Davidson quality.<br />
60639-00 Fits all ’94-later <strong>Softail</strong> models. $249.95<br />
B. OIL FILTER COVER KIT<br />
Chrome cover conceals the oil filter and filter mount<br />
for a finished look. The cover is removable for<br />
service, and the chrome-plated stainless steel hardware<br />
prevents corrosion. Custom slots in the cover<br />
allow cooling air-flow around the oil filter, while the<br />
side profile of the cover is dressed with an engraved<br />
Bar & Shield logo for a custom touch. From the workshop<br />
of Wyatt Fuller.<br />
62448-01 Fits ’00-later <strong>Softail</strong> models.<br />
Does not fit with Premium Oil<br />
Cooler P/N 62913-00.<br />
Does not fit with Cylinder Base Covers.<br />
C. EFI FUEL FITTING COVER<br />
This chrome-plated billet aluminium cover is contoured<br />
to conceal the fuel tank fittings on your fuel<br />
injected <strong>Harley</strong>. The milled Bar & Shield logo enhances<br />
the appearance, and the clean, simple installation<br />
shows your attention to every detail. Kit includes<br />
mounting hardware. From the workshop of Wyatt<br />
Fuller.<br />
62883-02 Fits ’02-later fuel injected<br />
<strong>Softail</strong> and ’00-’01 fuel injected<br />
Touring models. $36.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME INNER PRIMARY COVER<br />
NEW<br />
B. OIL FILTER COVER KIT<br />
NEW<br />
C. EFI FUEL FITTING COVER
D. BRAIDED OIL LINES<br />
281<br />
<strong>Softail</strong><br />
Oil Gauge and Braided Lines<br />
D. BRAIDED OIL LINES<br />
The ultimate custom replacement for the already<br />
uniquely exposed oil lines of the Twin Cam 88 for<br />
<strong>Softail</strong>. Engineered specifically for the Twin Cam 88B<br />
<strong>Softail</strong> powertrain, these lines include chrome-plated<br />
fittings, O-rings and clips.<br />
63860-00 Fits all ’00-later <strong>Softail</strong> models. $169.95<br />
E. CHROME ROCKER BOX BOLT COVERS<br />
Matching the styling of our classic chrome headbolt<br />
covers, these chrome-plated rocker box bolt covers<br />
add chrome to your Twin Cam 88 engine. Easy to<br />
install, the covers are held in place by spring steel clip.<br />
Each engine has a total of twelve rocker box bolts, but<br />
not all bolts are visible on all models, so the covers are<br />
sold in packages of four.<br />
43868-99 Fits ’99-later Twin<br />
Cam 88-equipped models. $15.95<br />
43943-01 Fits ’84-later XL<br />
Evolution and Evolution<br />
1340-equipped models. $16.95<br />
F. OIL PRESSURE GAUGE KIT<br />
Check your oil pressure at a glance with this oil-filled<br />
pressure gauge kit, specifically designed to look<br />
good, fit right, and perform properly on your Twin<br />
Cam 88 equipped motorcycle. The custom mounting<br />
brackets have been polished and chrome-plated to<br />
rigid <strong>Harley</strong>-Davidson standards and the gauge offers<br />
premium reliability. The kit includes all necessary<br />
hardware and mounting brackets for quick and clean<br />
installation.<br />
75133-99 Fits all ’99-later Dyna<br />
models,’00-later <strong>Softail</strong> models,<br />
and ’99-later FLHT and<br />
FLHR models. $66.95<br />
E. CHROME ROCKER BOX BOLT COVERS F. OIL PRESSURE GAUGE KIT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
282<br />
<strong>Softail</strong><br />
Oil Coolers<br />
A. PREMIUM OIL COOLER<br />
FOR SOFTAIL MODELS<br />
This vertically mounted oil cooler was designed specifically<br />
for <strong>Harley</strong>-Davidson to out-perform the other<br />
coolers in the industry. This cooler features a unique<br />
“Turbulator” design that efficiently distributes oil<br />
across the cooling chambers. The cooler features<br />
several louvers to efficiently dissipate heat. The unique<br />
and stylish adaptor plate incorporates the thermostat,<br />
and simplifies oil line routing for easy installation.<br />
Comes complete with mounting hardware.<br />
62913-00 Fits ’00-later <strong>Softail</strong> models.<br />
(Will not fit with Oil Filter<br />
Cover P/N 62816-98. Will not<br />
fit with front spoiler.) $279.95<br />
INSIDE VIEW OF<br />
PREMIUM OIL COOLER<br />
WITH TURBULATORS<br />
OIL FLOW OIL FLOW<br />
Turbulators<br />
(Inside cooler)<br />
Turbulators disperse and mix<br />
oil inside cooler to provide<br />
more efficient cooling capabilities.<br />
The cooler oil is not<br />
allowed to remain along the<br />
boundaries of the flow tube<br />
as in conventional coolers.<br />
Cooling<br />
Fins<br />
INSIDE VIEW OF<br />
CONVENTIONAL OIL COOLER<br />
WITHOUT TURBULATORS<br />
HOT<br />
OIL<br />
COOL<br />
OIL<br />
Coolers without the Turbulator<br />
system allow oil to flow only in<br />
a straight path. Oil does not<br />
mix and the cooler oil remains<br />
along the outer boundaries,<br />
while the hotter oil remains<br />
along the centre path of flow.<br />
Without the mixing effects of<br />
the Turbulators, the conventional<br />
oil cooler provides less<br />
efficient cooling capabilities.<br />
Oil Cooler Adapter Assembly (not shown)<br />
This black anodized billet aluminium adapter eliminates<br />
the lengthy oil cooler lines required for most<br />
aftermarket oil coolers. Standard in the H-D premium<br />
oil cooler kit, this adapter mounts between the filter<br />
mount and oil filter. Kit includes thermostat, gaskets,<br />
hardware and fittings.<br />
62882-00 Fits ’00-later <strong>Softail</strong> models $24.95<br />
B. SOFTAIL CHROME OIL COOLER COVER<br />
Add a beautiful accent to your <strong>Softail</strong> premium Oil<br />
Cooler. This chrome cover is designed to allow proper<br />
air flow through the integrated duct work. Requires<br />
Permatex clear silicon RTV adhesive for installation.<br />
74624-01 Fits ’00-later <strong>Softail</strong> models<br />
equipped with Premium Oil<br />
Cooler P/N 62913-00. $24.95<br />
C. OIL DIPSTICKS<br />
WITH TEMPERATURE GAUGES<br />
62896-00 Fits ’00-later <strong>Softail</strong> models. $29.95<br />
62668-87T Fits ’84-’99 FXST and FLST models.<br />
(Replaces P/N 62634-84.) $27.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. PREMIUM OIL COOLER FOR SOFTAIL MODELS<br />
B. PREMIUM OIL COOLER FOR SOFTAIL MODELS<br />
AND SOFTAIL CHROME OIL COOLER COVER<br />
C. OIL DIPSTICKS WITH<br />
TEMPERATURE GAUGES
D. LCD OIL TEMPERATURE DIPSTICK<br />
E. H-D MOTOR CO. OIL DIPSTICK F. BAR & SHIELD OIL DIPSTICK<br />
283<br />
<strong>Softail</strong><br />
Dipsticks and Engine Trim<br />
D. LCD OIL TEMPERATURE DIPSTICK<br />
Add function and style by replacing your stock<br />
dipstick with this hardworking version, which includes a<br />
beautiful chrome cap and LCD (liquid crystal display) oil<br />
temperature read-out. The read-out is push button<br />
operated with an automatic shut-off in five seconds and<br />
operates within plus or minus one degree. Designed<br />
also to stay on up to 15 minutes if desired. Fahrenheit<br />
or Celsius can be changed with a simple push button<br />
operation. The read-out is displayed with a rare blue<br />
light background for easier operation at night. All LCD<br />
dipsticks now incorporate an updated and more heat<br />
resistant LCD electronic unit. Twin Cam 88 LCD<br />
dipsticks also include an improved twist and pull<br />
cam-lock removal feature. Designed to be waterproof<br />
with replaceable standard battery. Patented.<br />
62970-02 Fits ’00-later <strong>Softail</strong> models. $89.95<br />
E. H-D MOTOR CO. OIL DIPSTICKS<br />
This collection personifies <strong>Harley</strong> style. It had better,<br />
because we put our name on it – The <strong>Harley</strong>-Davidson<br />
Motor Co. Collection.<br />
Fits ’00-later <strong>Softail</strong> models.<br />
62345-00 Chrome. $12.95<br />
62346-00 Satin Chrome. $12.95<br />
Fits ’84-’99 <strong>Softail</strong> models.<br />
62736-96A Chrome. $11.95<br />
F. BAR & SHIELD OIL DIPSTICK<br />
Add a touch of style with this chrome dipstick.<br />
Finished with a classic Bar & Shield Logo.<br />
62399-01 Fits ’00-later <strong>Softail</strong> models. $14.95<br />
G. CHROME HEADBOLT BRIDGE<br />
This exclusive Headbolt Bridge covers both the headbolts<br />
and spark plug with a splash of chrome and an<br />
engraved Bar & Shield emblem. Easy to install with<br />
unique headbolt mounts. Kit includes all necessary<br />
mounting hardware.<br />
43858-00 Fits ’99-later Twin Cam 88-equipped<br />
models. (Not to be used on models<br />
equipped with fairing lowers.) $45.95<br />
H. CHROME BILLET<br />
ALUMINIUM LIFTER COVERS<br />
Manufactured from billet aluminium and polished and<br />
plated for a rich look, these Chrome Billet Aluminium<br />
Lifter Covers add a custom look to Twin Cam 88equipped<br />
models. Unique styling matches H-D<br />
Chrome Pushrod Cover Kit, and fits with stock or<br />
Screamin’ Eagle Quick-Install Pushrods. Kit includes<br />
chrome mounting hardware and gaskets to complete<br />
the installation.<br />
18088-02 All ’99-later Twin Cam<br />
88-equipped models. $129.95<br />
G. CHROME HEADBOLT BRIDGE H. CHROME BILLET ALUMINIUM LIFTER COVERS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
284<br />
<strong>Softail</strong><br />
Chrome Covers<br />
A. CHROME PUSHROD COVER KIT<br />
These covers feature a unique look, curtesy of a special<br />
grooved design, and superior quality, thanks to a<br />
crafted combination billet 6061-T6 aluminium, finished<br />
with copper, dual nickel and chrome-plating.<br />
Can be used with Original Equipment pushrods or<br />
Screamin’ Eagle Adjustable Pushrods.<br />
18096-00A Fits all ’99-later Twin Cam 88equipped<br />
models. $174.95<br />
B. LIFTER BLOCK COVER<br />
Unlike other lifter block covers on the market, this<br />
chrome-plated cover features a design that helps hide<br />
the mounting hardware. With an embossed Bar &<br />
Shield logo, this kit cleans up the lifter block area and<br />
extends chrome from the gearcase cover to the lifter<br />
tubes. Includes all mounting hardware and installation<br />
tools. From the workshop of Wyatt Fuller.<br />
18262-00 Fits ’00-later Twin Cam 88-equipped<br />
<strong>Softail</strong> models. (Will not fit with<br />
Engine/Transmission Interface<br />
Top Cover P/N 66513-00.) $59.95<br />
C. ENGINE TRANSMISSION<br />
INTERFACE COVER<br />
Featuring a ribbed design for sharp surface contrasts,<br />
this chrome engine to transmission interface cover<br />
provides a custom option to conceal the space<br />
between the transmission, rear motor mount, and<br />
gearcase cover. Includes mounting hardware and<br />
bracket. Can be installed with or without complementing<br />
Top Cover P/N 66510-00.<br />
66508-00 Fits ’00-later <strong>Softail</strong> models. $59.95<br />
D. ENGINE TRANSMISSION TOP COVER<br />
This cover stylishly fills the top gap between the<br />
engine and transmission, and complements the<br />
styling of the Engine Transmission Interface Cover P/N<br />
66508-00. Includes mounting hardware.<br />
66510-00 Fits ’00-later <strong>Softail</strong> models.<br />
(Requires separate purchase<br />
of Engine Transmission<br />
Interface Cover P/N 66508-00<br />
for installation.) $34.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME PUSHROD COVER KIT B. LIFTER BLOCK COVER<br />
C. ENGINE TRANSMISSION INTERFACE COVER<br />
D. ENGINE TRANSMISSION TOP COVER
E. CHROME VOLTAGE REGULATOR F. CHROME VOLTAGE REGULATOR COVER<br />
G. BAR & SHIELD COIL COVER H. AIR WING HORN COVER<br />
I. SPRINGER CHROME HORN KIT J. REAR AXLE MECHANICAL<br />
SPEEDOMETER DRIVE KIT<br />
285<br />
<strong>Softail</strong><br />
Chrome Covers<br />
E. CHROME VOLTAGE REGULATOR<br />
We’ve taken the stock regulator and chromed it with<br />
our superior hexavalent process. It fits and works<br />
exactly like the stock part, but adds a custom shine to<br />
an otherwise dark area.<br />
74610-01 Fits all ’01-later <strong>Softail</strong> models. $127.95<br />
F. CHROME VOLTAGE REGULATOR COVER<br />
With a look that creates its own electricity, this<br />
chrome-plated cover features an embossed Bar &<br />
Shield and an open-centre grill that allows air to flow<br />
right through for regulator cooling. Designed for easy<br />
installation. Chrome mounting hardware included.<br />
From the workshop of Wyatt Fuller.<br />
74597-01 Fits ’01-later <strong>Softail</strong> models.<br />
(Will not fit with front spoilers.) $34.95<br />
74582-00 Fits ’00 <strong>Softail</strong> models.<br />
(Will not fit with front spoiler.) $34.95<br />
74578-97 Fits ’89-’99 <strong>Softail</strong> models. $34.95<br />
G. BAR & SHIELD COIL COVER<br />
Featuring a radical open-face design with a Bar & Shield<br />
silhouette, this chrome coil cover matches Chrome<br />
Voltage Regulator Cover P/Ns 74582-00 and 74578-97<br />
for an integrated custom look. Includes all mounting<br />
hardware. From the workshop of Wyatt Fuller.<br />
74615-01 Fits ’00-later <strong>Softail</strong><br />
and ’99-later Dyna models.<br />
(except models with EFI.) $34.95<br />
H. AIR WING HORN COVER<br />
This exclusive Air Wing chrome-plated horn cover is<br />
styled to complement the <strong>Harley</strong>-Davidson Billet<br />
Air Cleaner Cover, and is a stylish replacement for<br />
the Original Equipment horn cover. Mounts easily to<br />
stock horn cover bracket. From the workshop of<br />
Wyatt Fuller.<br />
69167-02 Fits all ’93-later models with<br />
side-mounted horn. $45.95<br />
I. SPRINGER CHROME HORN KIT<br />
Early style 12V horn features nostalgic <strong>Harley</strong>-<br />
Davidson Bar & Shield logo on chrome cover, and<br />
chrome mounting bracket and acorn nuts.<br />
69036-88A Fits ’88-later FXSTS and <strong>Softail</strong><br />
models equipped with Springer<br />
Front End Kit P/N 46007-88A.<br />
(Does not fit FLSTS.) $66.95<br />
J. REAR AXLE MECHANICAL<br />
SPEEDOMETER DRIVE KIT<br />
This kit provides a cleaner front end by moving the<br />
mechanical speedometer drive to the rear axle.<br />
Required for installation of Heritage Springer Front<br />
End Kit on ’86-’95 <strong>Softail</strong> models.<br />
67400-97 Fits ’86-’95 <strong>Softail</strong> models. $73.00<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
286<br />
<strong>Softail</strong><br />
Chrome Sliders<br />
A. CHROME LOWER FRONT FORK<br />
SLIDERS FOR FL SOFTAIL MODELS<br />
Competitively-priced, these chrome-plated Lower<br />
Fork Sliders give your bike upfront style. To ensure<br />
proper fitment and function, these sliders are manufactured<br />
from Original Equipment components, and all<br />
critical areas have been specifically protected from<br />
chrome-plating. Form follows function, with polished,<br />
hexavalent, triple chrome-plating and a stamped<br />
“<strong>Harley</strong>-Davidson” logo for product identification. Kit<br />
includes right and left side and the bottom axle retainer.<br />
46482-00 Fits ’00-later FLSTC<br />
and FLSTF models.<br />
(Reflectors included.) $289.95<br />
45310-98 Fits ’86-’99 FLSTC, FLSTF<br />
and FLSTN models. $279.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME LOWER FRONT FORK SLIDERS FOR FL SOFTAIL MODELS
B. CHROME LOWER FORK SLIDERS – SOFTAIL DEUCE STYLE<br />
C. CHROME LOWER FRONT FORK<br />
SLIDERS FOR FX SOFTAIL MODELS<br />
287<br />
<strong>Softail</strong><br />
Chrome Sliders<br />
B. CHROME LOWER FORK SLIDERS –<br />
SOFTAIL DEUCE STYLE<br />
Now you can add these unique lowers to your stock<br />
<strong>Softail</strong>. A great way to chrome your front end with the<br />
quality and fitment you can expect from a <strong>Harley</strong>-<br />
Davidson part.<br />
46522-00 Fits ’00-later FXST, and<br />
FXSTB models. Stock on<br />
’00-later FXSTD models.<br />
Requires separate purchase of<br />
primed or colour-matched FXSTD<br />
fender, Acorn Nut P/N 8001 (2),<br />
Spacer P/N 43623-00 (1),<br />
Axle P/N 43354-00 (1). $399.95<br />
C. CHROME LOWER FRONT FORK<br />
SLIDERS FOR FX SOFTAIL MODELS<br />
Competitively-priced, these chrome-plated Lower<br />
Fork Sliders give your bike upfront style. To ensure<br />
proper fitment and function, these sliders are manufactured<br />
from Original Equipment components, and<br />
all critical areas have been specifically protected<br />
from chrome-plating. Form follows function, with<br />
polished, hexavalent, triple chrome-plating and<br />
a stamped “<strong>Harley</strong>-Davidson” logo for product identification.<br />
Kit includes right and left side and the<br />
bottom axle retainer.<br />
46477-00 Fits ’00-later FXDWG,<br />
FXST and FXSTB models.<br />
(Reflectors included.) $294.95<br />
45305-98 Fits ’91-’99 FXDWG, FXST,<br />
FXSTC and FXSTB models. $289.95<br />
D. CHROME UPPER FORK SLIDER COVERS<br />
Brilliant chrome accents for the upper fork legs.<br />
Perfect for finishing off that chromed front end look.<br />
When used with H-D Genuine Motor Accessory<br />
Chrome Lower Front Fork Sliders, you’ve got a front<br />
end that’s completely chromed and an appearance<br />
that’s utterly impressive.<br />
45963-97 Fits ’49-’84 FL, ’80-later FLT,<br />
FLHT, FLHR, FLTR models and<br />
’86-later FLSTC, FLSTF and<br />
FLSTN models. (pair) $57.00<br />
D. CHROME UPPER FORK SLIDER COVERS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
288<br />
<strong>Softail</strong><br />
Black Components<br />
A. GLOSS BLACK COMPONENTS<br />
FOR SOFTAIL MODELS<br />
The classic <strong>Harley</strong>-Davidson colour is black. It shows<br />
your attitude, your feelings, and your desire to be<br />
different from the rest. These gloss black front end<br />
accessories are the ultimate extension of the <strong>Harley</strong>-<br />
Davidson philosophy. These radical accessories are<br />
e-coated and then powder-coated for maximum<br />
gloss and maximum protection against corrosion.<br />
These colour-matched accessories are manufactured<br />
from Original Equipment components, ensuring<br />
superior fit and finish.<br />
Gloss Black Engine Guard Kit<br />
49023-02 Fits ’00-later FLSTC,<br />
FLSTS and FLSTF models. $169.95<br />
Gloss Black Rear Saddlebag Guard Kit<br />
49269-02 Fits ’00-later <strong>Softail</strong> models (except<br />
FXSTD, FLSTF and FLSTS). ’00-later<br />
FLSTC models require Saddlebag<br />
Relocation Kit P/N 90238-00. $169.95<br />
Gloss Black Upper Fork Tube Cover Kit<br />
45591-02 Fits ’00-later FLSTC<br />
and FLSTF models. $49.95<br />
Gloss Black Lower Fork Slider Kit<br />
46540-02 Fits ’00-later FLSTC<br />
and FLSTF models. $249.95<br />
Gloss Black Triple Tree Cover Kit<br />
69310-02 Fits ’00-later FLSTC<br />
and FLSTF models. $199.95<br />
B. GLOSS BLACK LOWER<br />
FRONT FORK SLIDERS<br />
These gloss black coated sliders are the ultimate<br />
extension of the FXSTB Night Train model’s “dark<br />
side” and make a perfect custom addition to any<br />
<strong>Softail</strong> Night Train or <strong>Softail</strong> Standard. The sliders are<br />
built to Original Equipment specifications and the<br />
durable black coating is applied to H-D standards.<br />
45719-02 Fits ’00-later FXST<br />
and FXSTB models. $249.95<br />
C. GLOSS BLACK TRIPLE TREE KIT<br />
These gloss black powder-coated triple trees are not<br />
only manufactured to the same specifications as<br />
Original Equipment parts, they are made and coated<br />
by H-D’s York Assembly Plant. An ideal Customisation<br />
option for the FXSTB Night Train model, they also<br />
make a perfect addition to any FXST <strong>Softail</strong> Standard.<br />
46169-02 Fits ’00-later FXST<br />
and FXSTB models. $199.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. GLOSS BLACK COMPONENTS FOR SOFTAIL MODELS<br />
B. GLOSS BLACK LOWER<br />
FRONT FORK SLIDERS<br />
C. GLOSS BLACK TRIPLE TREE KIT
D. CHROME FORGED BILLET ALUMINIUM TRIPLE TREE KIT<br />
E. CHROME DECORATIVE<br />
FORK JOINT COVERS<br />
289<br />
<strong>Softail</strong><br />
Triple Tree and Fork Dust Covers<br />
D. CHROME FORGED BILLET<br />
ALUMINIUM TRIPLE TREE KIT<br />
A very thick, forged billet aluminium piece that loudly<br />
pronounces “custom”. This triple tree kit is precision<br />
machined from 7075-T6 aluminium, highly-polished,<br />
and dual nickel chrome-plated. A precisely<br />
machined, distinctive “<strong>Harley</strong>-Davidson” trademarked<br />
logo is proudly displayed on the front of the<br />
triple tree. Kit comes complete with both top and<br />
lower triple trees, steering stem, bearings, dust cups<br />
and mounting hardware. Installation of this kit<br />
disables Original Equipment fork lock function.<br />
45748-01 Fits ’84-later FXST, FXSTC<br />
and FXSTB <strong>Softail</strong> models and<br />
’93-later FXDWG models.<br />
Windshields will not fit with this kit.<br />
Requires separate purchase<br />
of stainless braided brake line<br />
for the appropriate model. Kit<br />
requires separate purchase of<br />
Fork Stop Kit P/N 46072-02,<br />
46073-02 or 46074-02. $399.95<br />
FORK STOP KIT<br />
Required for installation of Triple Tree Kit P/N 45748-01.<br />
46072-02 Fits ’00-later <strong>Softail</strong> models. $12.95<br />
46073-02 Fits ’84-’99 FXST/C models. $12.95<br />
46074-02 Fits ’93-later FXDWG models. $12.95<br />
E. CHROME DECORATIVE FORK<br />
JOINT COVERS<br />
Easy to install and require no tools. Patented.<br />
45411-82 Fits ’87-earlier XL, FXR,<br />
and FX models equipped<br />
with 35mm forks. $43.95<br />
45415-82 Fits ’84-later FXST, FXSTC,<br />
FXSTB, ’93-later FXDWG and<br />
’80-’86 FXWG models. $45.95<br />
F. CHROME LOWER FRONT FORK<br />
DUST COVER<br />
Replace your stock black rubber fork slider seal with<br />
this beautiful, chrome billet aluminium, 6061-T6 dust<br />
cover.<br />
45243-00 Fits ’84-later FXST, FXSTC,<br />
FXSTB, and FXDWG and<br />
’80-’86 FXWG models. $59.95<br />
F. CHROME LOWER FRONT FORK DUST COVER Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
290<br />
<strong>Softail</strong><br />
Chrome Panels and Spacers<br />
A. CHROME HEADLAMP FILLER PANEL KIT<br />
Complete the smooth, sleek front end styling of your<br />
<strong>Softail</strong> Deuce with this unique accessory. Polished<br />
and plated to a brilliant shine, this panel fills the area<br />
behind the headlamp and between the fork tubes for<br />
a solid, beefy look. Kit includes all necessary mounting<br />
hardware.<br />
69335-03 Fits ’00-later FXSTD models.<br />
Stock on ’03 FXSTDSE. $89.95<br />
Inset photo:<br />
CHROME RISER FILLER TRIM KIT<br />
The sweeping curved handlebar risers of the <strong>Softail</strong><br />
Deuce make a dramatic showing, and this Riser Filler<br />
Trim Kit makes the final statement. This beautifully polished<br />
and plated accent panel fills the area between<br />
the risers, concealing the wires and adding extra<br />
“beef” to the handlebar. You get the look of a solid<br />
riser, without the expense and installation hassles.<br />
69334-03 Fits ’00-later FXSTD models.<br />
Stock on ’03 FXSTDSE. $39.95<br />
B. CHROME REAR WHEEL SPACER KIT<br />
Add some chrome detail to an often overlooked area<br />
of the bike with these highly-polished Chrome Wheel<br />
Spacer Kits. Manufactured to the Original Equipment<br />
tolerances, they ensure product fitment and quality.<br />
41596-00 Fits all ’00-later <strong>Softail</strong> models. $27.95<br />
C. CHROME FRONT WHEEL SPACER KIT<br />
There’s always more room for chrome with these<br />
highly-polished Chrome Wheel Spacer Kits. They’re<br />
manufactured to the Original Equipment tolerances,<br />
so you get exact product fitment and quality.<br />
41597-00 Fits ’00-later FXST and<br />
FXSTB <strong>Softail</strong> models and<br />
’00-later FXDWG models. $25.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
A. CHROME HEADLAMP FILLER PANEL KIT<br />
B. CHROME REAR WHEEL SPACER KIT<br />
C. CHROME FRONT WHEEL SPACER KIT
D. CLASSIC CHROME BULLET<br />
FRONT AXLE COVERS<br />
F. FRONT AXLE NUT COVERS<br />
NEW<br />
E. BILLET FRONT AXLE NUT COVERS<br />
1 2<br />
3<br />
NEW NEW<br />
G. CHROME FRONT WHEEL SPACER KIT H. CHROME REAR WHEEL SPACER KIT<br />
291<br />
<strong>Softail</strong><br />
Axle Covers and Spacers<br />
D. CLASSIC CHROME BULLET<br />
FRONT AXLE COVERS<br />
The brilliant finish and the conical “Bullet” shape of<br />
these Front Axle covers are the ideal complement to<br />
the <strong>Softail</strong> Deuce fork sliders. This easy-to-install<br />
cover kit include mounting hardware.<br />
44122-03 Fits ’00-later FXSTD models. $34.95<br />
E. BILLET FRONT AXLE NUT COVERS<br />
These polished and chrome-plated Billet Front Axle<br />
Nut Covers are styled to match H-D Billet Style Hand<br />
Grips and Footpegs. Machined from premium 6061-T6<br />
aluminium, the dramatic knurling and black bands<br />
offer a clean custom look. Sold in pairs.<br />
43388-01 Fits ’80 -’99 Touring models,<br />
’84-later <strong>Softail</strong> models (except<br />
FXSTD, and Springer models),<br />
and ’95-later FXDWG models. $39.95<br />
F. FRONT AXLE NUT COVERS<br />
Classic Chrome-Billet<br />
1. 43375-00 Fits ’00-later Touring models.<br />
Classic Chrome – Die Cast<br />
$36.95<br />
43373-00 Fits ’00-later Touring models. $23.95<br />
43899-86A Fits ’84-later <strong>Softail</strong> (except<br />
FXSTS, FXSTSB, FLSTS), ’91-later<br />
FXD/FXDWG Dyna ’80-’99 FLT,<br />
FLTR, FLHT, FLHS, FLHR; ’88-later<br />
FXR/XL, ’87 FXLR/FXRS-S,<br />
’73-’84 FLH, ’80-’86 FXWG.<br />
H-D Motor Co. Collection<br />
2. 43376-00 Chrome.<br />
$20.95<br />
Fits ’00-later Touring models. $24.95<br />
43864-96 Chrome.<br />
Fits ’84-later <strong>Softail</strong> (except<br />
FXSTS, FXSTSB, FLSTS),<br />
’91-later FXD/FXDWG Dyna,<br />
’80-’99 FLT, FLTR, FLHT,<br />
FLHS, FLHR; ’88-later FXR/XL,<br />
’87 FXLR/FXRS-S, ’73-’84<br />
FLH, ’80-’86 FXWG.<br />
3. 43377-00 Satin Chrome.<br />
$22.95<br />
Fits ’00-later Touring models. $24.95<br />
43865-96 Satin Chrome.<br />
Fits ’84-later <strong>Softail</strong> (except<br />
FXSTS, FXSTSB, FLSTS),<br />
’91-later FXD/FXDWG Dyna,<br />
’80-’99 FLT, FLTR, FLHT,<br />
FLHS, FLHR; ’88-later FXR/XL,<br />
’87 FXLR/FXRS-S, ’73-’84<br />
FLH, ’80-’86 FXWG. $22.95<br />
G. CHROME FRONT WHEEL SPACER KIT<br />
Fill the gap between the wheel and the fork slider with<br />
this unique Spacer Kit. The rounded design complements<br />
any wheel and rotor combination, and looks<br />
great with the sleek <strong>Softail</strong> Deuce fork sliders. Kit<br />
includes left and right side spacers.<br />
41580-03 Fits ’00-later FXSTD models.<br />
Stock on ’03 FXDTDSE. $39.95<br />
H. CHROME REAR WHEEL SPACER KIT<br />
This nicely polished and plated spacer fills the area<br />
between the rear wheel and the swingarm, adding a<br />
custom detail most riders miss. The rounded design<br />
complements both stock and custom wheels, and is a<br />
great match with a chrome swingarm. Kit includes left<br />
and right side spacers.<br />
41581-03 Fits ’00-later <strong>Softail</strong> models.<br />
Stock on ’03 FXSTDSE. $39.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
292<br />
<strong>Softail</strong><br />
Triple Trees and Fork Nut Covers<br />
A. LOWER TRIPLE TREE COVER<br />
This Lower Triple Tree Cover dresses up the unfinished<br />
underside of the triple tree for a complete custom look.<br />
The chrome-plated steel cover installs easily, concealing<br />
the brake splitter fitting. All mounting hardware is<br />
included. From the workshop of Wyatt Fuller.<br />
66053-01 Fits ’00-later FL <strong>Softail</strong><br />
models (except FLSTS). $36.95<br />
B. CHROME LOWER TRIPLE TREE COVER<br />
This Lower Triple Tree Cover dresses up the unfinished<br />
underside of the triple tree for a complete custom look.<br />
The chrome-plated steel cover installs easily on the<br />
underside of the triple tree, and all mounting hardware<br />
is included. From the workshop of Wyatt Fuller.<br />
66021-00 Fits ’00-later FXSTD models. $34.95<br />
C. CHROME UPPER FORK NUT COVERS<br />
Highlighted with a unique Bar & Shield logo, these polished<br />
triple chrome-plated covers add an additional<br />
clean looking appearance to your upper fork. Kit<br />
comes complete with three covers, mounting hardware<br />
and wrench for easy, on-the-spot installation.<br />
46129-98 Fits ’86-later FLSTC, ’90-later<br />
FLSTF, ’95-later FXD, ’93-later<br />
FXDL, ’94-later FXDS, and<br />
’88-later XL 883 models. (Does<br />
not fit XL 1200S, XL 1200 Custom<br />
or 883 Custom models.) $46.95<br />
45002-98 Fits ’00-later FSXT, FXSTB, FXSTD<br />
and ’86-’99 FXSTC <strong>Softail</strong> models<br />
and ’93-later FXDWG models. $46.95<br />
D. CHROME RISER CUP WASHER KIT<br />
Add a finishing touch to the riser on your bike. This kit<br />
includes two styled and chrome-plated washers that<br />
replace the standard metal washers below the handlebar<br />
risers. Replaces Original Equipment P/N 56159-73.<br />
56486-01 Fits most XL, Dyna<br />
and <strong>Softail</strong> models. See<br />
your Dealer for specific<br />
model application. $23.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
A. LOWER TRIPLE TREE COVER<br />
B. CHROME LOWER TRIPLE TREE COVER<br />
C. CHROME UPPER FORK NUT COVERS<br />
D. CHROME RISER CUP WASHER KIT
E. SOFTAIL CUSTOM AND DYNA WIDE<br />
GLIDE FRONT HUBCAP<br />
G. SCREAMIN’ EAGLE<br />
CHROME FORK BRACE – 41MM<br />
F. HERITAGE SPRINGER FRONT HUBCAP<br />
H. CHROME FORK BRACE<br />
I. FORK BRACE J. LOCK BLOCK SHOWN WITH LOCK<br />
293<br />
<strong>Softail</strong><br />
Chrome Hubcaps and Fork Braces<br />
E. FRONT HUBCAPS<br />
Adds a touch of class and complements the classic<br />
styling of 21" laced wheels. Hand-polished and<br />
chrome-plated to rigid specifications.<br />
43287-01 Fits ’00-later FXDWG, FXSTB,<br />
FXSTD and FXSTS models<br />
with laced wheels. $43.95<br />
43163-97 Fits ’97-’99 FXSTC and<br />
FXDWG models. (Cannot be<br />
used with Genuine Motor<br />
Accessory Custom Wheels.) $43.95<br />
44465-88A Fits ’84-’96 FXWG, FXST,<br />
FXSTC, FXSTS and ’93-’96 FXDWG.<br />
Fits ’87-earlier sport models equipped<br />
with 35 mm front forks. Easy<br />
to install – no tools required. $37.95<br />
F. FRONT HUBCAP<br />
FOR HERITAGE SPRINGER<br />
A brilliant, hand-polished, chrome-plated hubcap is<br />
the perfect nostalgic complement to the laced wheels<br />
and whitewall tires of the FLSTS.<br />
43295-01 Fits ’00-later FLSTS models<br />
with laced wheels. $43.95<br />
43162-97 Fits ’97-’99 FLSTS models. $43.95<br />
Shown with:<br />
TEARDROP FRONT<br />
FORK ROCKER COVERS<br />
Nostalgic chrome-plated styling that seems to be in<br />
constant motion. Easily installs on Heritage Springer<br />
without removing wheel. Patent applied for.<br />
43161-97 Fits ’97-later FLSTS. $64.95<br />
SCREAMIN’ EAGLE<br />
CHROME FORK BRACE<br />
These chrome fork braces are machined from billet<br />
aluminium, then polished and chrome-plated. Easy to<br />
install, these braces offer increased torsional rigidity.<br />
Made in the U.S.A.<br />
G. 46193-99 41mm.<br />
Fits ’84-later FXST, FXSTC,<br />
FXSTB and ’93-later<br />
FXDWG models with 41mm<br />
front forks. Will not fit<br />
with chrome fork sliders. $199.95<br />
H. 46265-02 Fits ’00-later FXSTD models. $219.95<br />
I. FORK BRACE<br />
This chrome-plated fork brace adds style to the front<br />
end.<br />
46097-98 Fits ’93-later FXDWG and ’84-later<br />
FXST models (except Springer<br />
and FXSTD) and ’99-later FXSTB<br />
models. (Will not fit with Chrome<br />
Lower Fork Sliders P/Ns<br />
45305-98 or 46477-00.) $129.95<br />
J. THE LOCK BLOCK<br />
This uniquely-styled chrome Lock Block allows the<br />
rider to store our most popular <strong>Harley</strong> Bar & Shield<br />
Padlock (P/N 45737-72A) on the bike in the locked<br />
position, secured in place by an O-ring. Installed on<br />
the front chassis, the lock block provides a convenient,<br />
hidden, easy-to-access lock storage space.<br />
Manufactured from billet aluminium. Kit includes<br />
chrome mounting hardware.<br />
46466-99A Fits ’84-later <strong>Softail</strong><br />
models. Do not install on<br />
FLSTC or FLSTS models. $34.95<br />
Shown with:<br />
BAR & SHIELD PADLOCK AND<br />
LEATHER PADLOCK POUCH (sold separately)<br />
Bar & Shield Padlock<br />
Our best-selling lock of all time. A beautiful lock with<br />
a long, proven history of success.<br />
45737-72A Chrome-plated<br />
and case-hardened. $21.95
294<br />
<strong>Softail</strong><br />
Fork Covers and Deflectors<br />
A. CHROME FORK COVER KIT<br />
Replace your factory-equipped fork covers with these<br />
brilliant, triple chrome-plated versions for a long-lasting<br />
mirror-like finish.<br />
67890-91A Fits ’86-later FLST, FLSTC,<br />
FLSTF, FLSTN models. $119.95<br />
Shown with:<br />
B. CHROME FORK COVER<br />
ACCENT STRIP KIT<br />
Sometimes the best ideas come from you, our fellow<br />
riders, like this chrome accent strip. This kit is<br />
designed to add the ultimate complement to the<br />
already popular chrome triple clamp kit by accenting<br />
the sides with beautiful chrome-extruded aluminium<br />
strips. Kit includes chrome hardware.<br />
67891-99 Fits ’86-later FLST, FLSTC,<br />
FLSTF, FLSTN models with<br />
Chrome Fork Cover Kit<br />
P/N 67890-91A. (Does not<br />
fit with passing lamps<br />
and windshields.) $24.95<br />
C. SOFTAIL CHROME WIND DEFLECTORS<br />
Adds the fully-dressed look to Heritage <strong>Softail</strong> Classic<br />
models. Redesigned to fit models with 5-gallon Fat<br />
Bob fuel tanks.<br />
58125-90B Fits ’86-later FLSTC, FLST, FLSTF,<br />
and FLSTN models equipped with<br />
<strong>Harley</strong>-Davidson King-Size Windshield<br />
and/or Passing Lamp Kits. (Designed to<br />
also fit with accessory 5-gallon Fat Bob<br />
fuel tanks.) (Does not fit FLSTS.) NOTE:<br />
Windshield cannot be adjusted<br />
with wind deflectors without kit<br />
P/N 58155-90. $66.50<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME FORK COVER KIT<br />
B. CHROME FORK COVER ACCENT STRIP KIT<br />
C. SOFTAIL CHROME WIND DEFLECTORS
D. CHROME HEADLIGHT NACELLE<br />
E. CHROME FRONT FUEL TANK MOUNTING<br />
HARDWARE KIT – SOFTAIL MODELS<br />
295<br />
<strong>Softail</strong><br />
Headlamp Nacelle and Hardware<br />
D. CHROME HEADLIGHT NACELLE<br />
If the chrome from this nacelle seems to reflect the<br />
image of 1960’s FL, that’s because the spirit of the<br />
past styling is built right in. Coupled with the separate<br />
purchase of the Chrome Nacelle Hardware Kit<br />
(P/N 67897-96), it will work with existing H-D<br />
windshield and/or passing lamps. Includes hardware<br />
for installation of Nacelle with detachable windshield<br />
without passing lamp. Hardware kit is required when<br />
installing chrome Nacelle with passing lamps or rigid<br />
mount windshield.<br />
67907-96 Fits ’86-later FL <strong>Softail</strong> models<br />
(except FLSTS or FXSTS). $389.95<br />
Shown with:<br />
CHROME UPPER FORK SLIDER COVERS<br />
Brilliant chrome accents for the upper fork legs.<br />
Perfect for finishing off that chromed front end look.<br />
When used with H-D Genuine Motor Accessory<br />
Chrome Lower Front Fork Sliders, you’ve got a front<br />
end that’s completely chromed and an appearance<br />
that’s utterly impressive.<br />
45963-97 Fits ’49-’84 FL, ’80-later FLT,<br />
FLHT, FLHR, FLTR models<br />
and ’86-later FLSTC, FLSTF<br />
and FLSTN models. (pair) $57.00<br />
Also shown with:<br />
CHROME NACELLE HARDWARE KIT<br />
This kit provides the additional hardware required to<br />
install the Chrome Headlight Nacelle P/N 67907-96 on<br />
FL <strong>Softail</strong> models that were previously equipped with<br />
passing lamps, rigid mounted windshields or<br />
Detachable windshields.<br />
NOTE: This kit is not required when installing<br />
windshield P/Ns 58649-97A, 58651-97A, 58652-97A<br />
and 58653-97A.<br />
67897-96A $45.95<br />
Adjustable Window<br />
When installing the Chrome Headlight Nacelle P/N<br />
67907-96 on FL <strong>Softail</strong> models that were previously<br />
equipped with a two-piece windshield, the Adjustable<br />
Window must be trimmed for additional clearance.<br />
This modification can be eliminated by installing this<br />
new Adjustable Window specifically designed for the<br />
shape and contour of the Chrome Headlight Nacelle.<br />
58663-97 $34.95<br />
E. CHROME FRONT FUEL TANK MOUNTING<br />
HARDWARE KIT – SOFTAIL MODELS<br />
Beauty lies in the details. And this chrome-plated Fuel<br />
Tank Mounting Hardware Kit ensures you won’t leave<br />
this one overlooked. The perfect finishing touch to<br />
your fuel tank, the kit includes the machined washers<br />
and custom nuts required for your model.<br />
62965-01 Fits ’00-later <strong>Softail</strong> models. $24.95<br />
F. CHROME BILLET CLUTCH CABLE CLAMP<br />
The perfect addition to braided stainless or stock<br />
black clutch cables. This Clutch Cable Clamp is<br />
machined from aluminium billet, and polished and<br />
plated for a lasting shine. The clamp is designed<br />
to grip the cable and the frame down tube, adding a<br />
custom look to the front of your cycle.<br />
91147-02 Fits all models with<br />
1-1/4" diameter front frame<br />
down tube. (Does not fit<br />
Touring models.) $39.95<br />
F. CHROME BILLET CLUTCH CABLE CLAMP Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
296<br />
<strong>Softail</strong><br />
Chrome Swingarm and Covers<br />
A. CHROME-PLATED SWINGARM<br />
FOR SOFTAIL MODELS<br />
The ultimate chrome accessory polished to the<br />
highest standard using bright hexavalent plating.<br />
Affordable and convenient, with no troublesome<br />
exchanges necessary. Factory-made specifications<br />
guarantee exact fitment, unparalleled quality and<br />
affordable price. Stamped with the <strong>Harley</strong>-Davidson<br />
Bar & Shield logo.<br />
48442-00 Fits ’00-later <strong>Softail</strong> models. $549.95<br />
49231-97 Fits ’89-’99 <strong>Softail</strong> models. $549.95<br />
Shown with:<br />
CHROME SWINGARM AXLE COVERS<br />
FOR SOFTAIL<br />
Unique styling includes recessed brushed aluminium<br />
trim discs. These covers are hand-polished and<br />
include copper, nickel, and chrome finishing processes.<br />
Includes a pair of axle mounting brackets, cotter<br />
pin, muffler spacers (required on FLSTN models only),<br />
and installation instructions. Replacement nameplate<br />
P/N 47604-91. Patented.<br />
47596-91B Fits ’87-later <strong>Softail</strong> models<br />
(except FLSTS). (Will not work<br />
with Saddlebags P/N’s 91190-97,<br />
90835-90C, 90119-00, 91536-00,<br />
91537-00 and 90114-00.) $69.95<br />
B. CHROME LOWER BELT GUARD<br />
Replaces the Original Equipment, providing exceptional,<br />
chrome-plated detail to the rear drive system.<br />
Includes all mounting hardware.<br />
60316-00 Fits all ’00-later <strong>Softail</strong> models. $69.95<br />
60389-97A Fits all ’95-’99 U.S. and<br />
International <strong>Softail</strong> models and<br />
’94-’99 International models equipped<br />
with a 65-tooth rear sprocket. $64.95<br />
60394-90A Fits all ’93 U.S. <strong>Softail</strong> models,<br />
and all ’88-’93 International <strong>Softail</strong><br />
models, and ’94 Australian<br />
<strong>Softail</strong> models equipped with 61-tooth<br />
rear sprockets. Not intended for<br />
use with 65-tooth rear sprocket. $48.95<br />
60366-89A Fits ’85-’92 and ’94 U.S. <strong>Softail</strong><br />
models equipped with 70-tooth rear<br />
sprocket. (Does not fit ’93 U.S.<br />
<strong>Softail</strong> or ’88-’93 International <strong>Softail</strong><br />
models equipped with 61-tooth<br />
rear sprocket.) Not intended for<br />
use with 65-tooth rear sprocket. $48.95<br />
C. SWINGARM PIVOT AXLE KIT<br />
Designed to replace the Original Equipment swing<br />
arm pivot axle. This styled axle looks great by itself, or<br />
is a great addition when installing a chrome swingarm.<br />
47119-02 Fits ’00-later <strong>Softail</strong> models.<br />
Will not fit with Passenger Footboard<br />
Kit P/N 50602-00, 50602-89B,<br />
50955-00 or 50955-97A $89.95<br />
D. POLISHED STAINLESS STEEL<br />
REAR FENDER EXTENSION<br />
Polished to a mirror finish that nearly looks like chrome,<br />
this extension adds additional beauty in an area that’s<br />
usually overlooked. A great addition to any <strong>Softail</strong>.<br />
60476-00 Fits all ’00-later <strong>Softail</strong> models. $39.95<br />
60401-98 Fits all ’86-’99<br />
<strong>Softail</strong> models. (shown) $39.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME-PLATED SWINGARM FOR SOFTAIL MODELS<br />
A. CHROME-PLATED SWINGARM<br />
FOR SOFTAIL MODELS<br />
NEW<br />
C. SWINGARM PIVOT AXLE KIT<br />
B. CHROME LOWER BELT GUARD<br />
D. POLISHED STAINLESS STEEL<br />
REAR FENDER EXTENSION
E. CHROME UPPER SWINGARM COVER KIT FOR SOFTAIL MODELS<br />
F. SOFTAIL FRAME TRIM SET G. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT<br />
1<br />
2<br />
3<br />
297<br />
<strong>Softail</strong><br />
Frame Inserts and Pivot Bolt Covers<br />
E. CHROME UPPER SWINGARM<br />
COVER KIT FOR SOFTAIL MODELS<br />
Give chrome the upper hand with this chrome die-cast<br />
cover for your upper swingarm. Mounts easily with all<br />
necessary hardware included. Then continue your<br />
back-end chrome with Rear Axle Cover Kit P/N<br />
48112-00 or 48056-97B.<br />
47059-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD). $69.95<br />
F. SOFTAIL FRAME TRIM SET<br />
Easy-to-install chrome-plated trim plates fit into<br />
recesses on rear of <strong>Softail</strong> frame near swingarm pivot.<br />
Comes with double-sided adhesive tape. Adds a finishing<br />
touch. (Shown with Chrome Swingarm Pivot<br />
Cover P/N 43897-86B, sold separately.)<br />
47300-88T Fits all ’84-later <strong>Softail</strong> models<br />
(except ’00-later FLSTF and<br />
FXSTD models equipped<br />
with shotgun exhaust). $17.95<br />
G. SOFTAIL FRAME INSERT<br />
AND PIVOT BOLT KIT<br />
Chrome rear frame inserts get you going on the road<br />
toward the perfect <strong>Softail</strong>. Kit includes Swingarm Pivot<br />
Bolt Covers and Frame Inserts. Easy installation kit.<br />
48452-00 Fits ’00-later FLSTF and<br />
FXSTD models. $36.95<br />
H. SWINGARM PIVOT BOLT COVER KITS<br />
1. Aluminator Chrome Billet<br />
Swingarm Pivot Bolt Cover Kit<br />
Cover your swingarm pivot bolt with the distinctive<br />
styling of the Aluminator collection. These covers are<br />
made from chrome-plated billet aluminium and<br />
engraved with the Bar & Shield emblem. Hex wrench<br />
included for easy installation. Sold in pairs.<br />
43314-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FLSTF, FXSTD and<br />
models with Passenger<br />
Footboard Kit P/N 50602-00<br />
or 50955-00). $42.95<br />
43821-95 Fits all ’84-’99 <strong>Softail</strong><br />
models (except FLSTS).<br />
2. Classic Chrome<br />
$33.95<br />
Includes Allen-head set screws and wrench for easy<br />
installation. Sold in pairs.<br />
43462-00 Fits ’00-later <strong>Softail</strong> models (except<br />
FLSTF, FXSTD and models with<br />
Passenger Footboard Kit P/Ns<br />
50602-00 and 50955-00). $21.95<br />
43897-86B Fits all ’84-’99 <strong>Softail</strong> models<br />
(except FLSTS).<br />
3. H-D Motor Co. Pivot Bolt Cover<br />
$20.95<br />
Die-cast, chrome-plated with black “<strong>Harley</strong>-Davidson<br />
Motor Co.” logo. Includes Allen-head set screws, and<br />
wrench for easy installation. Sold in pairs.<br />
Fits ’00-later <strong>Softail</strong> models (except FLSTF, FXSTD<br />
and models with Passenger Footboard Kit P/Ns<br />
50602-00 and 50955-00).<br />
43468-00 Chrome. $22.95<br />
43469-00 Satin Chrome. $22.95<br />
Fits all ’84-’99 <strong>Softail</strong> models. (Does not fit FLSTS.)<br />
43830-96 Chrome. $22.95<br />
43831-96 Satin Chrome. $22.95<br />
H. SWINGARM PIVOT BOLT COVER KITS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
298<br />
<strong>Softail</strong><br />
Chrome Covers and Hardware<br />
A. SOFTAIL SWINGARM FRAME COVER KIT<br />
This easy to install die-cast Swingarm Frame Cover<br />
Kit adds a flash of chrome around the swingarm pivot.<br />
The adhesive mounted custom moulded rubber<br />
inserts fit the contour of the frame for a custom look,<br />
and the included cast Bar & Shield pivot bolt cover<br />
adds a finishing touch. From the workshop of Wyatt<br />
Fuller.<br />
48490-00 Fits ’00-later <strong>Softail</strong> models<br />
(except FLSTF, FXSTD,<br />
FLSTS and models equipped<br />
with Passenger Footboard Kits<br />
P/N 50602-00 or 50955-00). $59.95<br />
B. PIVOT BOLT & FOOTPEG<br />
MOUNT COVER KIT<br />
Add a slash of chrome to your bike’s profile. These<br />
chrome plated die-cast covers bridge the swingarm<br />
pivot bolt and the passenger foot peg mount, adding<br />
more visual impact than traditional pivot bolt covers.<br />
The moulded rubber inserts and the included hardware<br />
create a tight custom fit, and the engraved Bar &<br />
Shield logo completes the look. From the workshop of<br />
Wyatt Fuller.<br />
48491-01 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD, FLSTF<br />
and models with passenger<br />
footboards installed). $32.95<br />
C. CHROME HARDWARE KIT<br />
FOR REAR BELT SPROCKET<br />
This kit includes highly-polished, chrome-plated,<br />
grade eight hex-head screws with chrome-plated<br />
washers, providing an extra custom accent. The perfect<br />
addition to the new chrome sprocket. Made from<br />
the same Original Equipment bolts to ensure product<br />
integrity. Also works with chrome belt sprocket covers<br />
and Original Equipment sprockets.<br />
94773-00 Fits ’00-later <strong>Softail</strong><br />
and Dyna models. $28.95<br />
94708-98 Fits all ’93-’99 <strong>Softail</strong>, ’93-’99<br />
Dyna, ’91-later Sportster<br />
rear belt sprockets. $28.95<br />
D. CHROME SOCKET HEAD CAP SCREW<br />
HARDWARE KIT FOR REAR BELT SPROCKET<br />
These Socket Head Cap Screws provide extra<br />
chrome detail to the rear belt sprocket. Includes<br />
chrome-plated washers and grade 8 hardware to<br />
ensure maximum product integrity.<br />
43245-00 Fits all ’00-later <strong>Softail</strong> models. $26.95<br />
43244-00 Fits all ’93-’99 <strong>Softail</strong> models. $26.95<br />
E. DECORATIVE CHROME<br />
ACORN NUT/STUD KIT<br />
91734-85 Fits ’80-’99 Evolution<br />
1340-equipped models<br />
(except Dyna models)<br />
equipped with secondary belt<br />
drive and cast rear wheels. $33.95<br />
F. CHROME REAR HUBCAP KIT<br />
Add custom style to your rear wheel with this “babymoon”<br />
shaped hubcap, which is machined from high<br />
quality billet aluminium, chrome-plated and highly<br />
polished. Designed to allow use with chrome sprocket<br />
covers. From the workshop of Wyatt Fuller.<br />
43253-00A Fits all ’00-later <strong>Softail</strong> models. $59.95<br />
43200-99A Fits all ’93-’99 <strong>Softail</strong> models. $59.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL SWINGARM FRAME COVER KIT B. PIVOT BOLT & FOOTPEG MOUNT<br />
COVER KIT<br />
C. CHROME HARDWARE KIT<br />
FOR REAR BELT SPROCKET<br />
E. DECORATIVE CHROME ACORN NUT/STUD KIT<br />
NEW<br />
D. CHROME SOCKET HEAD CAP<br />
SCREW HARDWARE KIT FOR<br />
REAR BELT SPROCKET<br />
F. CHROME REAR HUBCAP KIT
G. REAR AXLE NUT COVER KIT – CHROME REAR AXLE NUT COVER KIT – SATIN CHROME<br />
REAR AXLE NUT COVER KIT –<br />
CLASSIC CHROME<br />
I. PISTON REAR AXLE COVER<br />
AND ADJUSTER<br />
NEW NEW<br />
NEW<br />
H. SIX-SHOOTER REAR AXLE<br />
COVER AND ADJUSTER<br />
J. O-RING KIT FOR PISTON REAR<br />
AXLE COVER AND ADJUSTER<br />
299<br />
<strong>Softail</strong><br />
Rear Axle Nut Covers<br />
G. REAR AXLE NUT COVER KIT<br />
Cover your rear axle nut in the most traditional way.<br />
This Rear Axle Nut Cover Kit complements the matching<br />
front axle nut covers and the swingarm pivot<br />
bolt covers that are available for your <strong>Softail</strong> model.<br />
Easy to install, these cover kits include necessary<br />
mounting hardware. Sold in pairs. From the workshop<br />
of Wyatt Fuller.<br />
H-D Motor Co. Collection – Chrome<br />
44254-01 Fits ’00-later <strong>Softail</strong> models. $26.95<br />
H-D Motor Co. Collection – Satin Chrome<br />
44255-01 Fits ’00-later <strong>Softail</strong> models. $26.95<br />
Classic Chrome Collection<br />
44256-01 Fits ’00-later <strong>Softail</strong> models. $24.95<br />
H. SIX-SHOOTER REAR AXLE<br />
COVER AND ADJUSTER<br />
Shoot for the custom look with this chrome revolverstyled<br />
axle adjuster cover. Machined from billet<br />
aluminium for maximum style.<br />
48179-98A Fits ’86-later <strong>Softail</strong> models.<br />
(Will not fit with Saddlebags<br />
P/N’s 91190-97, 90835-90C,<br />
90119-00, 91536-00, 91537-00<br />
and 90114-00.) $69.95<br />
I. PISTON REAR AXLE<br />
COVER AND ADJUSTER<br />
Simple, clean chrome-plated styling to add brilliance<br />
to your rear axle adjuster.<br />
48180-98A Fits ’86-later <strong>Softail</strong> models.<br />
(Will not fit with Saddlebags<br />
P/N’s 91190-97, 90835-90C,<br />
90119-00, 91536-00,<br />
91537-00 and 90114-00.) $62.95<br />
J. O-RING KIT FOR PISTON<br />
REAR AXLE COVER AND ADJUSTER<br />
This O-ring Kit was specifically developed for the<br />
Piston Rear Axle Cover Adjuster Kit (P/N 48180-98A).<br />
The O-rings fit nicely into the grooves on the covers<br />
and adjusters. Adds an additional flair to these already<br />
beautifully chromed pieces. Shown with Piston Rear<br />
Axle Cover and adjuster which is sold separately.<br />
49001-98 Fits Piston-Style Axle Cover/<br />
Adjuster Kit P/N 48180-98A. $4.50<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
300<br />
<strong>Softail</strong><br />
Swingarm Axle Covers<br />
A. SOFTAIL SWINGARM AXLE COVER<br />
Chrome-plated die-cast cover, accented with textured<br />
recesses and an engraved Bar & Shield emblem. From<br />
the workshop of Wyatt Fuller.<br />
48112-00 Fits ’90-later FLSTF<br />
and ’00-later FXSTD models.<br />
(Will not fit with Saddlebags<br />
P/N’s 91190-97, 90835-90C,<br />
90119-00A, 91536-00A,<br />
91537-00A, 91555-01A<br />
and 90114-00.) $112.95<br />
48056-97B Fits ’87-later <strong>Softail</strong> models (except<br />
FLSTF, FLSTN and FXSTD models<br />
with stock shotgun exhaust).<br />
(Will not fit with Saddlebags P/N’s<br />
91190-97, 90835-90C, 90119-00A,<br />
91536-00A, 91537-00A,<br />
91555-01A and 90114-00.) $109.95<br />
B. BLACK SOFTAIL<br />
SWINGARM AXLE COVERS<br />
Our traditional <strong>Softail</strong> Axle Covers are available with<br />
an elegant black painted finish. They are accented<br />
with a dark aluminium emblem and a bright “<strong>Harley</strong>-<br />
Davidson” script. Chrome hardware included. Patented.<br />
47615-95B Fits ’87-later <strong>Softail</strong> models<br />
(except FLSTS). (Will not fit<br />
with Saddlebags P/N’s 91190-97,<br />
90835-90C, 90119-00A,<br />
91536-00A, 91537-00A,<br />
90114-00 and 91555-01A.) $76.95<br />
NOTE: All black parts are painted with a special twostep<br />
urethane process with hardeners for a durable,<br />
glossy shine. As with any painted surface, care must<br />
be taken when using.<br />
C. CHROME SWINGARM AXLE COVERS<br />
FOR SOFTAIL MODELS<br />
Unique styling includes recessed brushed aluminium<br />
trim discs. These covers are hand-polished and<br />
include copper, nickel, and chrome finishing processes.<br />
Includes a pair of axle mounting brackets, cotter<br />
pin, muffler spacers (required on FLSTN models only),<br />
and installation instructions. Replacement nameplate<br />
P/N 47604-91. Patented.<br />
47596-91B Fits ’87-later <strong>Softail</strong> models<br />
(except FLSTS). (Will not fit<br />
with Saddlebags P/N’s 91190-97,<br />
90835-90C, 90119-00A,<br />
91536-00A, 91537-00A,<br />
90114-00 and 91555-01A.) $69.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL SWINGARM AXLE COVER<br />
B. BLACK SOFTAIL SWINGARM AXLE COVERS<br />
C. CHROME SWINGARM AXLE COVERS<br />
FOR SOFTAIL MODELS
D. CHROME SPROCKET COVER –<br />
DEUCE STYLING<br />
F. CHROME BELT SPROCKET COVERS<br />
E. CHROME SPROCKET COVER<br />
301<br />
<strong>Softail</strong><br />
Sprocket Covers<br />
D. CHROME SPROCKET COVER –<br />
DEUCE STYLING<br />
Styled to match the distinctive FXSTD <strong>Softail</strong> Deuce<br />
rear wheel. This sprocket cover gives the appearance<br />
of having a custom chrome sprocket at a fraction of<br />
the cost. Cover easily bolts on using the stock hardware.<br />
For a finished look, use the Chrome Hardware<br />
Kit for Rear Belt Sprockets (P/N 94773-00) from<br />
Genuine Motor Accessories.<br />
91348-00 Fits all ’00-later <strong>Softail</strong> models. $48.95<br />
E. CHROME SPROCKET COVER<br />
This sprocket cover gives the appearance of having a<br />
chrome sprocket at a fraction of the cost. It matches<br />
the styling of the Original Equipment sprocket and<br />
bolts on using the stock hardware. For a finished look,<br />
use the Chrome Hardware Kit for Rear Belt Sprocket<br />
(P/N 94773-00) from Genuine Motor Accessories.<br />
91347-00 Fits ’00-later <strong>Softail</strong> models. $48.95<br />
F. CHROME BELT SPROCKET COVERS<br />
65-Tooth Sprocket Cover<br />
Fits all ’95-’99 <strong>Softail</strong> models and ’94-later Evolution<br />
1340-equipped Swiss models with holes.<br />
40317-94 $45.95<br />
61-Tooth Sprocket Cover<br />
This smaller diameter cover is designed for<br />
Evolution1340-equipped models equipped with stock<br />
production 61-tooth rear sprockets as supplied on<br />
’88-’93 International 1340 models, ’93 U.S. <strong>Softail</strong><br />
models, and ’95-later Australian <strong>Softail</strong> models.<br />
40284-90A With holes. $45.95<br />
70-Tooth Sprocket Cover<br />
Fits ’91-’99 Dyna and ’99 FXD models. Also fits<br />
’80-later U.S. 1340 models except ’93 and ’95-later<br />
<strong>Softail</strong> models. ’94 U.S. <strong>Softail</strong>s are equipped with<br />
70-tooth rear sprockets. Also fits all ’94-later<br />
International 1340 models (except International<br />
<strong>Softail</strong> and Swiss 1340 models).<br />
91740-87A Without holes. $44.95<br />
91733-85A With holes. $45.95<br />
G. CHROME EXHAUST BRACKET KIT<br />
FOR FLSTC, FXSTC AND FXSTS MODELS<br />
Replace your stock black bracketry with this chromeplated<br />
bracket kit. Made from the same components<br />
as the Original Equipment to ensure product integrity.<br />
Includes chrome mounting hardware.<br />
65526-98 Fits ’95-’99 FLSTC FXSTC<br />
and FXSTS models. $67.95<br />
G. CHROME EXHAUST BRACKET KIT FOR FLSTC, FXSTC AND FXSTS MODELS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
302<br />
<strong>Softail</strong><br />
Chrome Calipers<br />
A. CHROME FRONT CALIPER KIT<br />
Add the shine of chrome to your front end with this<br />
highly-polished Chrome Front Brake Caliper Kit.<br />
Manufactured from Original Equipment components<br />
for proven performance, these calipers are a great<br />
addition to the stock front end or add the finishing<br />
touch to a complete custom with chrome wheels,<br />
rotors and chrome fork sliders. (Brake pads and pad<br />
pins not included.)<br />
44395-00 Fits all ’00-later models with<br />
Single Disc Front Brakes<br />
(except FXSTS and FLSTS). $359.95<br />
Shown with:<br />
B. CHROME CALIPER BOLT COVER KIT<br />
Cover your caliper mounting bolts in chrome. These<br />
easy-to-install chrome covers are held firmly in place<br />
with a spring steel clip, and are styled to match the<br />
Chrome Rocker Box and Headbolt Covers. Each kit<br />
includes four bolt covers. NOTE: Each front caliper<br />
has four exposed bolts (two if a Chrome Caliper Cover<br />
is installed), and rear caliper has three exposed bolts.<br />
43824-01 Fits all ’00-later front and<br />
rear 12-Point caliper<br />
mounting bolts (except<br />
Springer front calipers). $18.95<br />
Shown with:<br />
FRONT CALIPER COVER<br />
Chrome-plated caliper cover styled with stepped contours<br />
and textured recess for a distinctive look. Split<br />
cover design does not require brake line removal.<br />
From the workshop of Wyatt Fuller.<br />
43759-00 Fits all left hand calipers on<br />
’00-later FXDWG and ’00-later<br />
<strong>Softail</strong> models (except Springer<br />
and FXSTD models). (Will not fit<br />
with braided brake lines.) $39.95<br />
C. CHROME REAR CALIPER KIT<br />
With H-D chrome behind you, you’re cruising with<br />
confidence. This Rear Caliper Kit offers a brilliant,<br />
long-lasting chrome finish while delivering Original<br />
Equipment performance and fitment. Bolts right to<br />
existing mounting holes. (Brake pads and pad pins<br />
not included.)<br />
44414-01 Fits ’00-later FXSTD and<br />
’00-’02 <strong>Softail</strong> models<br />
equipped with Wide Tyre Kit. $424.95<br />
44539-02 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD) and ’02-later<br />
VRSC models. Not compatible<br />
with Wide Tyre Kit. $399.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME FRONT CALIPER KIT<br />
B. CHROME CALIPER BOLT COVER KIT<br />
C. CHROME REAR CALIPER KIT
D. FRONT CALIPER COVER<br />
303<br />
<strong>Softail</strong><br />
Caliper Covers<br />
D. FRONT CALIPER COVER<br />
Chrome-plated caliper cover styled with stepped contours<br />
and textured recess for a distinctive look. Split<br />
cover design does not require brake line removal.<br />
From the workshop of Wyatt Fuller.<br />
43759-00 Fits all left hand calipers<br />
on ’00-later FXDWG and ’00-later<br />
<strong>Softail</strong> models (except Springer<br />
and FXSTD models). (Will not fit<br />
with braided brake lines.) $39.95<br />
E. REAR CALIPER COVER<br />
Chrome-plated caliper covers styled with stepped<br />
contours and textured recess for a distinctive look.<br />
Does not require brake line removal. From the workshop<br />
of Wyatt Fuller.<br />
43553-00 Fits ’00-later <strong>Softail</strong> and<br />
Dyna models. (Will not fit<br />
with braided brake lines.) $34.95<br />
E. REAR CALIPER COVER Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
304<br />
<strong>Softail</strong><br />
Caliper Rotor Covers<br />
A. CHROME CALIPER ROTOR COVER<br />
Add clean, chrome style to your front end with this<br />
cover, which features high quality, hexavalent chromeplating<br />
that complements the lines of your bike.<br />
43367-00 Fits ’00-later FLSTC<br />
and FLSTF models. $114.95<br />
B. ELECTRA GLO LIGHT RING KIT<br />
Roll on the rays of light. Featuring outer and inner<br />
bands of amber coloured LED lights, this trim ring<br />
easily attaches to the rotor cover, illuminating the<br />
entire wheel at the flip of a switch. The Electra Glo<br />
Light Ring provides auxiliary side lighting as well.<br />
Installs easily with pre-applied adhesive backing.<br />
Requires the installation of Caliper/Rotor Cover Kit<br />
(sold separately).<br />
46800-02 Amber outer colour, Amber<br />
inner colour. Fits ’00-later<br />
FLSTC and FLSTF models<br />
equipped with the Chrome<br />
Rotor and Caliper Cover<br />
Kit P/N 43367-00. $104.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME CALIPER ROTOR COVER<br />
B. ELECTRA GLO LIGHT RING KIT
C. CHROME LICENCE PLATE MOUNT –<br />
SOFTAIL STANDARD<br />
D. LAYBACK LICENCE PLATE MOUNTING<br />
KIT<br />
NEW<br />
C. CHROME LICENCE PLATE MOUNT –<br />
SOFTAIL DEUCE<br />
E. BAR & SHIELD LICENCE PLATE<br />
MOUNTING HARDWARE KIT<br />
F. SILVER CALIPER HARDWARE KIT G. SILVER BRAKE PAD PIN KIT<br />
NEW<br />
NEW<br />
305<br />
<strong>Softail</strong><br />
Licence Plate Mounting Kits<br />
C. CHROME LICENCE PLATE MOUNT<br />
Show off your tail. This chrome-plated cover fits over<br />
the stock bobtail fender mount licence plate bracket.<br />
This mirror-finished cover features a custom reflector<br />
with “<strong>Harley</strong>-Davidson” graphics. Includes mounting<br />
hardware for cover and licence plate.<br />
59720-01A Fits ’99-later FXDWG, ’00-later<br />
FXSTD, FXST, FXSTS and FXSTB<br />
models. Also fits XL models equipped<br />
with Bobtail Fender Kit. $34.95<br />
D. LAYBACK LICENCE<br />
PLATE MOUNTING KIT<br />
Chrome-plated, light-weight, die-cast aluminium<br />
licence plate mount. Custom reflector with <strong>Harley</strong>-<br />
Davidson logo. No modification to licence plate<br />
required due to unique mounting system. All mounting<br />
hardware provided.<br />
59817-00A Fits licence plate up to 7-1/4 x 4-1/4<br />
inches. Fits models with a three-hole<br />
rear fender mount licence plate<br />
bracket. (Does not fit FLSTS, FXDS-<br />
CONV, FXDXT, ’00-’01 FXDX, Touring<br />
models, VRSC models or models<br />
with a Bobtail rear fender, check<br />
for clearance before installing<br />
with rear fender rack.) $37.95<br />
59822-00 Fits licence plate up to 8-1/2 x 4-3/4<br />
inches. Fits models with a three-hole<br />
rear fender mount licence plate<br />
bracket. (Does not fit FLSTS, FXDS-<br />
CONV, FXDXT, ’00-’01 FXDX, Touring<br />
models, VRSC models or models<br />
with a Bobtail rear fender, check<br />
for clearance before installing<br />
with rear fender rack.) $38.95<br />
E. BAR & SHIELD LICENCE PLATE<br />
MOUNTING HARDWARE KIT<br />
Proudly display the Bar & Shield. The Bar & Shield<br />
shaped bolt heads on this unique chrome plated<br />
stainless steel Licence Plate Mounting Kit stand out<br />
from the pack. The hardware is installed with a custom<br />
Bar & Shield shaped wrench, reducing the possibility<br />
of licence plate theft. The kit includes four lock nuts,<br />
washers, bolts and the special wrench.<br />
94114-02 Universal. $19.95<br />
F. SILVER CALIPER HARDWARE KIT<br />
Plated silver finish hardware is a great finishing<br />
touch to Chrome Brake Calipers. This kit replaces<br />
the Original Equipment black 12-point bolts on a<br />
single caliper.<br />
44473-02 Fits all ’00-later models<br />
(except Springer front caliper). $12.95<br />
G. SILVER BRAKE PAD PIN KIT<br />
Plated silver finish hardware is a great finishing<br />
touch to Chrome Brake Calipers. This kit replaces<br />
the Original Equipment black brake pad pins on a<br />
single caliper.<br />
44324-02 Fits all ’00-later models<br />
(except Springer front caliper). $5.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
306<br />
<strong>Softail</strong><br />
Shift Levers<br />
A. BILLET STYLE SHIFT LEVER<br />
Styled to complement our Billet Style mirror stems,<br />
these Billet Style Shift Levers are forged from 6061-<br />
T6 aluminium, then machine-finished and chromeplated<br />
for a beautiful, custom look. Includes chrome<br />
hardware.<br />
34539-00 Fits ’91-later Dyna and<br />
’90-later FX <strong>Softail</strong> models. $79.95<br />
B. BILLET STYLE HEEL/TOE SHIFT LEVER<br />
Styled to complement our Billet Style mirror stems,<br />
these Billet Style Shift Levers are forged from 6061-T6<br />
aluminium, then machine-finished and chrome-plated<br />
for a beautiful, custom look. Kit includes a front and<br />
rear lever and chrome hardware.<br />
34535-00A Fits ’86-later FL <strong>Softail</strong><br />
and ’88-later FLT, FLTR, FLHR,<br />
FLHS and FLHT models. $139.95<br />
C. BULLET SHIFT LEVER<br />
The “bullet grooved” sweep of this forward curving<br />
shift lever accents the style of your low and lean FX<br />
<strong>Softail</strong> model. Designed to complement the “Bullet”<br />
shift linkage and mirrors, this beautifully chromed<br />
lever also looks great with Original Equipment brake<br />
levers and linkages.<br />
34616-02 Fits ’91-later Dyna models<br />
and ’90-later FX <strong>Softail</strong> models. $59.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. FX SOFTAIL BILLET STYLE SHIFT LEVER<br />
B. FL SOFTAIL BILLET STYLE<br />
HEEL/TOE SHIFT LEVER<br />
NEW<br />
C. BULLET SHIFT LEVER
D. BILLET STYLE REAR BRAKE LEVER<br />
307<br />
<strong>Softail</strong><br />
Brake Levers<br />
D. BILLET STYLE REAR BRAKE LEVER<br />
Styled to complement our Billet Style mirror stems<br />
and shift levers, this Billet Style Rear Brake Lever is<br />
forged from 2014-T6 aluminium, then machine-finished<br />
and chrome-plated for a beautiful, custom look.<br />
Brake Pedal Pads sold separately.<br />
42632-00 Fits ’00-later FXST, FXSTS,<br />
FXSTB and FXSTD models<br />
(except FXSTD2 ). $159.95<br />
42634-00 Fits ’84-’99 FXST, FXSTC,<br />
FXSTS and FXSTB models. (Will<br />
not fit with FX <strong>Softail</strong> Rear Master<br />
Cylinder Cover P/N 41796-97.) $159.95<br />
Shown with:<br />
BILLET STYLE BRAKE PEDAL PAD –<br />
NARROW BAND<br />
42629-00 Small.<br />
Fits ’84-later FXST,<br />
FXSTS, FXSTB models and<br />
’93-later FXDWG models. $38.50<br />
BILLET STYLE REAR BRAKE LEVER<br />
Styled to complement our Billet Style mirror stems<br />
and shift levers, this Billet Style Rear Brake Lever is<br />
forged from 2014-T6 aluminium, then machine-finished<br />
and chrome-plated for a beautiful, custom look.<br />
Brake Pedal Pads sold separately.<br />
E. 42638-00A Fits ’87-’99 FLSTC, FLSTS,<br />
FLSTF and FLSTN models,<br />
and ’97-later FLHT, FLHTC/I,<br />
FLHTCUI, FLHR/I, FLHRCI,<br />
FLTR/I models. $159.95<br />
F. 42640-00 Fits ’00-later FLSTC, FLSTF<br />
and FLSTS models. $159.95<br />
E. BILLET STYLE REAR BRAKE LEVER F. BILLET STYLE REAR BRAKE LEVER Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
308<br />
<strong>Softail</strong><br />
Heel Rests, Levers and Covers<br />
A. RIDER FOOTPEG HEEL RESTS<br />
FOR FORWARD CONTROLS<br />
Give your feet a rest while you’re stretching out on<br />
your forward controls. These adjustable billet-style<br />
rider footpeg heel rests reduce fatigue and make you<br />
look as good as you feel. Just add a pair of matching<br />
shifter pegs as heel rests to complete the custom<br />
look. (sold separately)<br />
1. 50227-01 Fits ’93-’02 FXDWG and ’89-later<br />
FX <strong>Softail</strong> models. Also fits Dyna<br />
models equipped with Forward<br />
Control Kit P/N 49080-93 and late<br />
’87-’99 FXSTS and FXSTC models<br />
equipped with Extended Reach Forward<br />
Control Kit P/N 49163-91. $109.95<br />
Shown with:<br />
BILLET STYLE SHIFT LEVER<br />
Styled to complement our Billet Style mirror stems,<br />
these Billet Style Shift Levers are forged from 6061-<br />
T6 aluminium, then machine-finished and chromeplated<br />
for a beautiful, custom look. Includes chrome<br />
hardware.<br />
2. 34539-00 Fits ’91-later Dyna and<br />
’90-later FX <strong>Softail</strong> models. $79.95<br />
Wide Band Billet Footpeg and Shifter Peg<br />
3. 50986-99 Small Diameter<br />
Billet Footpegs. (pair) $79.95<br />
4. 49256-99 Billet Shifter Peg. $16.95<br />
Also shown with:<br />
BILLET STYLE BRAKE<br />
PEDAL PAD – WIDE BAND<br />
5. 42626-00 Small.<br />
Fits ’84-later FXST,<br />
FXSTS, FXSTB models and<br />
’93-later FXDWG models. $38.50<br />
B. CHROME FORWARD CONTROL BRACKETS<br />
Check out these new forward control brackets. We’ve<br />
taken the Original Equipment black painted components<br />
to insure product quality, and polished and<br />
chrome-plated them for a great look. Kit includes new<br />
bushings.<br />
33920-00 Fits ’00-later FX <strong>Softail</strong> models. $219.95<br />
C. BILLET FRONT AXLE NUT COVERS<br />
These polished and chrome-plated Billet Front Axle<br />
Nut Covers are styled to match H-D Billet Style Hand<br />
Grips and Footpegs. Machined from premium 6061-T6<br />
aluminium, the dramatic knurling and black bands<br />
offer a clean custom look. Sold in pairs.<br />
43388-01 Fits ’80 -’99 Touring models,<br />
’84-later <strong>Softail</strong> models (except<br />
FXSTD, and Springer models),<br />
and ’95-later FXDWG models. $39.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
4<br />
4<br />
1<br />
5<br />
A. RIDER FOOTPEG HEEL RESTS FOR FORWARD CONTROLS<br />
B. CHROME FORWARD CONTROL BRACKETS<br />
3<br />
2<br />
3<br />
1<br />
4<br />
C. BILLET FRONT AXLE NUT COVERS
D. EXTENDED REACH BRAKE PEDAL KIT<br />
E. EXTENDED REACH FORWARD<br />
CONTROL KIT<br />
309<br />
<strong>Softail</strong><br />
Extended Reach Kits and Heel Rests<br />
D. EXTENDED REACH BRAKE PEDAL KIT<br />
A comfortable reach for any foot, this pedal allows<br />
extra room for your foot on the floorboard. Stock on<br />
’02-later FL <strong>Softail</strong> and Touring models, the kit<br />
includes Original Equipment Rubber Brake Pedal Pad.<br />
42676-02 Fits ’87-’99 FLST models<br />
and all ’97-’01 Touring models.<br />
(Cannot be used with <strong>Softail</strong> Soft<br />
Lowers P/N 58562-96.) $119.95<br />
Shown with:<br />
CHROME AND RUBBER FL BRAKE PEDAL PAD<br />
Chrome and rubber both have their distinct places in<br />
the world of motorcycle styling. It seemed natural to<br />
bring the two together to create this unique collection.<br />
Bolt-on easy. Patent applied for.<br />
Fits ’80-later FLHT, FLT, FLTR, FLHR, FLHS and<br />
’86-later FLSTC, FLSTN, FLSTF, FLSTS models.<br />
42478-95 3-Slot. Horizontal. $31.95<br />
E. EXTENDED REACH FORWARD<br />
CONTROL KIT*<br />
Extends the rider control pegs a full 3 inches forward of<br />
their stock position. This comprehensive kit includes<br />
black powder-coated shifter and brake mounting<br />
plates, chrome shift rod, chrome shift rod lever, rear<br />
brake hose, all necessary hardware, and installation<br />
instructions. This kit requires reuse of stock, Original<br />
Equipment footpegs, brake pedal, and shifter lever.<br />
*WARNING: Installation of this kit may affect<br />
cornering clearance. This could distract the<br />
rider, causing loss of control, resulting in death<br />
or serious injury.<br />
1<br />
49163-91 Fits late ’87-’99 FXSTS and<br />
FXSTC models (will not fit when <strong>Softail</strong><br />
Dual Fishtail Exhaust System P/N 65281-<br />
92B or Dual Exhaust System<br />
P/N 65281-96 is installed). $169.95<br />
NOTE: Installation of engine guard**, when Forward<br />
Control Kit is installed, requires FLSTC Engine Guard<br />
P/N 49004-90 and Adapter Bracket Kit P/N 49164-93<br />
listed below.<br />
Engine Guard Adapter Bracket Kit (not shown)<br />
Required to install Chrome Engine Guard P/N 49004-<br />
90 on FXSTC, FXST models equipped with Extended<br />
Reach Forward Control Kit P/N 49163-91. Includes<br />
adapter bracket, spacers, hardware, and instructions.<br />
49164-93 Fits late ’87-’99 FXSTS,<br />
FXSTC models equipped<br />
with Extended Reach Forward<br />
Control Kit P/N 49163-91. $57.95<br />
1<br />
**WARNING: These guards may provide limited<br />
leg and cosmetic vehicle protection under<br />
unique circumstances (fall over while stopped,<br />
very low speed slide). They are not made nor<br />
intended to provide protection from bodily<br />
injury in a collision with another vehicle or any<br />
other object.<br />
F. AIRFOIL HEEL RESTS<br />
Designed to complement H-D Airfoil Footpegs, these<br />
Airfoil Heel Rests help reduce rider fatigue on a long<br />
trip, and add a touch of style around town.<br />
50281-01 Fits ’89-later FX <strong>Softail</strong> models<br />
and ’90-later Dyna models<br />
(except ’03-later FXDWG). $109.95<br />
F. AIRFOIL HEEL RESTS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
310<br />
<strong>Softail</strong><br />
Shift Linkages<br />
A. POLISHED SCRIPTED STAINLESS<br />
STEEL GEARSHIFT LINKAGE<br />
Kick your customizing into gear with a polished stainless<br />
steel gear shift linkage. Featuring aircraft quality<br />
rod ends, a stainless steel transmission cover and<br />
decorative acorn nuts for maximum custom effect.<br />
The polished stainless steel finish won’t chip, peel or<br />
discolour. Easy to install.<br />
“<strong>Softail</strong>” Scripted<br />
33852-02 Fits ’86-later <strong>Softail</strong> models<br />
(except ’99-earlier FLSTS models or<br />
models equipped with <strong>Softail</strong> Dual<br />
Exhaust P/N 65281-96). $159.95<br />
“Deuce” Scripted<br />
33853-02 Fits ’86-later <strong>Softail</strong> models<br />
(except ’99-earlier FLSTS models or<br />
models equipped with <strong>Softail</strong> Dual<br />
Exhaust P/N 65281-96). $159.95<br />
“Fat Boy” Scripted<br />
33854-02 Fits ’86-later <strong>Softail</strong> models<br />
(except ’99-earlier FLSTS models or<br />
models equipped with <strong>Softail</strong> Dual<br />
Exhaust P/N 65281-96). $159.95<br />
“Springer” Scripted<br />
33855-02 Fits ’86-later <strong>Softail</strong> models<br />
(except ’99-earlier FLSTS models or<br />
models equipped with <strong>Softail</strong> Dual<br />
Exhaust P/N 65281-96). $159.95<br />
B. BULLET POLISHED STAINLESS<br />
STEEL GEARSHIFT LINKAGE<br />
Kick your customizing into gear with this collection of<br />
high quality, polished stainless steel shift linkages. The<br />
linkages feature aircraft quality rod ends, a stainless<br />
steel transmission lever cover and decorative acorn<br />
nuts and bolts for a complete custom look. The polished<br />
stainless steel finish will last without chipping,<br />
peeling or discolouring. Easy to install.<br />
34604-02 Fits ’86-later <strong>Softail</strong> and<br />
Touring models, ’94-later<br />
FLHR models with stock<br />
foot controls. (Does not fit<br />
’99 and earlier FLSTS models<br />
or models with <strong>Softail</strong> Dual<br />
Exhaust P/N 65281-96.) $164.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. POLISHED SCRIPTED STAINLESS STEEL GEARSHIFT LINKAGE<br />
A. POLISHED SCRIPTED STAINLESS STEEL GEARSHIFT LINKAGE<br />
NEW<br />
B. BULLET POLISHED STAINLESS STEEL GEARSHIFT LINKAGE
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
C. POLISHED STAINLESS STEEL GEARSHIFT LINKAGES<br />
311<br />
<strong>Softail</strong><br />
Shift Linkages and Stands<br />
C. POLISHED STAINLESS STEEL<br />
GEARSHIFT LINKAGES<br />
Kick your customizing into gear with this collection of<br />
high-quality, polished stainless steel shift linkages.<br />
Available in a variety of designs, the linkages feature<br />
aircraft quality rod ends, a stainless steel transmission<br />
lever cover and decorative acorn nuts and bolts for a<br />
complete custom look. The polished, stainless steel<br />
finish will last without chipping, peeling or discolouring.<br />
Easy to install.<br />
Polished Stainless Steel Shift Linkages<br />
for <strong>Softail</strong> and Touring Models<br />
Fits ’86-later <strong>Softail</strong> and Touring models, ’94-later<br />
FLHR models with stock foot controls. (Does not fit<br />
’99 and earlier FLSTS models or models with <strong>Softail</strong><br />
Dual Exhaust P/N 65281-96.)<br />
1. 33840-02 Flame. $199.95<br />
2. 33801-02 Scripted. $159.95<br />
3. 33821-98A Diamond. $126.95<br />
4. 33819-98A Hex. $126.95<br />
5. 33817-98A Twisted. $108.95<br />
6. 33814-98A Round. $86.95<br />
7. 33762-98A Ball-Milled with Bar & Shield. $162.95<br />
8. 33760-98A Slotted with Bar & Shield. $162.95<br />
Polished Stainless Steel Shift Linkages<br />
for Heritage Springer (not shown)<br />
33816-98 Round.<br />
Fits ’97-’99 FLSTS models. $102.95<br />
D. JIFFY STAND EXTENSION KIT<br />
This kit has been redesigned to add convenience<br />
and style to our existing jiffy stand. Polished and<br />
chrome-plated, it installs easily and includes all<br />
chrome hardware.<br />
50233-00 Fits ’84-later FLT, FLHT, FLHS,<br />
FLHR and FLHRC; ’98-later FLTR<br />
and all ’86-later <strong>Softail</strong> models. $39.95<br />
E. JIFFY STAND STRAP AND FASTENER KIT<br />
A beautiful way to accent your chrome jiffy stand.<br />
Manufactured from Original Equipment components,<br />
the locking strap is polished and chrome-plated to a<br />
mirror shine. The kit includes a chrome acorn nut and<br />
washer for a finishing touch.<br />
50306-02 Fits ’89-later <strong>Softail</strong> models. $19.95<br />
D. JIFFY STAND EXTENSION KIT E. JIFFY STAND STRAP AND FASTENER KIT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
NEW
312<br />
<strong>Softail</strong><br />
Chrome Covers<br />
A. REAR MASTER CYLINDER COVER<br />
Chrome-plated steel cover. Custom moulded rubber<br />
retainer allows for easy installation and removal.<br />
45665-01 Fits ’00-later <strong>Softail</strong> models<br />
(except FLSTC, FLSTF, FLSTS). $39.95<br />
B. CHROME MASTER<br />
CYLINDER COVER – REAR<br />
An easy way to add chrome to your bike is with this<br />
chrome-plated version of the stock master cylinder<br />
cover.<br />
45149-99A Fits all ’00-later <strong>Softail</strong> and<br />
’99-later Touring models. $29.95<br />
C. FL SOFTAIL GEARSHIFT CONTROL COVER<br />
Sweeping radii and chrome-plating give this gear shift<br />
control cover distinctive styling. Designed for easy<br />
installation. From the workshop of Wyatt Fuller.<br />
33616-96 Fits ’87-’99 FLSTF, FLSTN,<br />
FLSTC and FLSTS models. $59.95<br />
D. FL SOFTAIL GEAR SHIFT<br />
CONTROL COVER KIT<br />
Sweeping radii lines and chrome-plating give this gear<br />
shift control cover distinctive styling. Designed for<br />
easy installation. From the workshop of Wyatt Fuller.<br />
(Shown without toe-shift lever for clarity.)<br />
33825-00 Fits ’00-later FL <strong>Softail</strong> models. $59.95<br />
E. FL SOFTAIL REAR MASTER<br />
CYLINDER COVER<br />
The distinctive styling of our Gear Shift Control Cover<br />
P/N 33616-96 carried over to this chrome-plated rear<br />
cylinder cover. Easy installation. Another product from<br />
the workshop of Wyatt Fuller.<br />
41760-97 Fits ’87-’99 FLSTF, FLSTN,<br />
FLSTC and FLSTS models. $59.95<br />
F. FL SOFTAIL REAR MASTER<br />
CYLINDER COVER<br />
The distinctive styling of our Gear Shift Control Cover<br />
P/N 33825-00 is carried over to this chrome-plated<br />
rear master cylinder cover. Designed for easy installation.<br />
From the workshop of Wyatt Fuller.<br />
41815-00 Fits ’00-later FL <strong>Softail</strong> models. $59.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. REAR MASTER CYLINDER COVER B. CHROME MASTER<br />
CYLINDER COVER – REAR<br />
C. FL SOFTAIL GEARSHIFT CONTROL COVER D. FL SOFTAIL GEARSHIFT<br />
CONTROL COVER KIT<br />
E. FL SOFTAIL REAR MASTER<br />
CYLINDER COVER<br />
F. FL SOFTAIL REAR<br />
MASTER CYLINDER COVER
G. SOFTAIL PASSENGER FOOTBOARD KITS<br />
H. NOSTALGIC RIDER<br />
FOOTBOARD INSERT KIT<br />
J. CHROME AND RUBBER<br />
RIDER FOOTBOARD INSERT KIT<br />
I. NOSTALGIC PASSENGER<br />
FOOTBOARD INSERT KIT<br />
K. CHROME AND RUBBER PASSENGER<br />
FOOTBOARD INSERT KIT<br />
313<br />
<strong>Softail</strong><br />
Footboards and Insert Kits<br />
G. SOFTAIL PASSENGER FOOTBOARD KITS<br />
Convenient bolt-on installation. Includes specially<br />
designed mounting stud/brackets for proper installation.<br />
Footboards fold up when not in use. Kit includes<br />
aluminium footboards, rubber pads, mounting hardware<br />
and installation instruction.<br />
NOTE: Passenger footboard kits cannot be used with<br />
Pivot Bolt Covers P/Ns 43462-00, 43468-00 or<br />
43469-00.<br />
50602-00 Fits ’00-later <strong>Softail</strong> models (except<br />
FLSTS, FLSTF and FXSTD). FLSTC models require<br />
Saddlebag Bracket Relocation Kit P/N 90238-00.$<br />
50602-89B Fits ’86-’99 <strong>Softail</strong> models<br />
(except FLSTS, FLSTF and FLSTN). NOTE: ’90-’99<br />
FLSTC models require Saddlebag Bracket Relocation<br />
Kit P/N 90345-90A. $186.95<br />
Heritage Springer Passenger Footboard Kit<br />
(not shown)<br />
50955-00 Fits ’00-later FLSTS models. $204.95<br />
50955-97A Fits ’97-’99 FLSTS models. $203.95<br />
H. NOSTALGIC RIDER<br />
FOOTBOARD INSERT KIT<br />
Quick, easy replacement of stock Rubber Footboard<br />
Insert. Made from stamped chrome-plated steel and<br />
high-durability rubber. Retains cast-in vibration isolation<br />
found in stock Footboard Inserts. Kit includes left<br />
and right insert. Patent applied for.<br />
50187-96 Fits ’80-later FLHT, FLT,<br />
FLTR, FLHR, FLHS and<br />
’86-later FLSTC, FLSTN, FLSTF<br />
and FLSTS models. (pair) $92.95<br />
Shown with:<br />
NOSTALGIC BRAKE PEDAL PAD<br />
44248-96 Fits ’80-later FLHT, FLT,<br />
FLHR, FLHS and ’86-later FLSTC,<br />
FLSTN, FLSTF and FLSTS<br />
models. Patent applied for. $34.95<br />
I. NOSTALGIC PASSENGER<br />
FOOTBOARD INSERT KIT<br />
Quick, easy replacement of stock Rubber Footboard<br />
Insert. Made from stamped chrome-plated steel and<br />
high-durability rubber. Retains cast-in vibration isolation<br />
found in stock Footboard Inserts. Kit includes left<br />
and right insert. Patent applied for.<br />
50190-96 Fits ’86-later FLHT, FLT, FLTR, FLHR,<br />
FLHS and ’86-later <strong>Softail</strong> models equipped<br />
with H-D Accessory Passenger Footboard<br />
Kit P/Ns 50602-89B, 50955-97A, 50602-00,<br />
or 50955-00. Compatible with Chrome<br />
Passenger Footboard Covers. (pair) $84.95<br />
J. CHROME AND RUBBER<br />
RIDER FOOTBOARD INSERT KIT<br />
Quick, easy replacement of stock Rubber Footboard<br />
Insert. Made from stamped chrome-plated steel and<br />
high-durability rubber. Retains cast-in vibration isolation<br />
found in stock Footboard Inserts. Kit includes left<br />
and right insert. Patent applied for.<br />
50176-95 Slotted. Fits ’80-later FLHT,<br />
FLT, FLHR, FLTR, FLHS and ’86-later FLSTC,<br />
FLSTN, FLSTF, FLSTS models. (pair) $92.95<br />
Shown with:<br />
CHROME AND RUBBER FL BRAKE PEDAL PAD<br />
42478-95 Fits ’80-later FLHT, FLT,<br />
FLTR, FLHR, FLHS and ’86-later FLSTC,<br />
FLSTN, FLSTF, FLSTS models. $31.95<br />
K. CHROME AND RUBBER<br />
PASSENGER FOOTBOARD INSERT KIT<br />
Quick, easy replacement of stock Rubber Footboard<br />
Insert. Made from stamped chrome-plated steel and<br />
high-durability rubber. Retains cast-in vibration isolation<br />
found in stock Footboard Inserts. Kit includes left<br />
and right insert. Patent applied for.<br />
50177-95 Slotted. Fits ’86-later FLHT, FLT,<br />
FLHR, FLTR, FLHS and ’86-later <strong>Softail</strong> models<br />
equipped with H-D Accessory Passenger Footboard Kit<br />
P/N 50602-89B, P/N 50955-97A, 50602-00, or 50955-<br />
00. Compatible with Chrome Passenger Footboard<br />
Covers. (pair) $84.95
314<br />
<strong>Softail</strong><br />
Footboard Covers & Fender Skirts<br />
A. V-LOGO PASSENGER FOOTBOARD COVERS<br />
V-Logos are die-cast aluminium integrated with the<br />
cover, then chrome-plated for a desirable shine.<br />
Includes all mounting hardware.<br />
50194-96 Fits Touring models with stock<br />
aluminium passenger footboards. Fits<br />
’86-later FL <strong>Softail</strong> models equipped<br />
with P/Ns 50602-00, 50955-00, 50602-<br />
89B and 50955-97A; ’87-later FLT,<br />
FLHT, ’94-later FLHR, and FLHRC;<br />
’98-later FLTR models. $64.95<br />
B. V-LOGO FENDER SKIRT<br />
V-Logos are die-cast aluminium integrated with the<br />
fender skirt, then chrome-plated for a desirable shine.<br />
Includes all mounting hardware.<br />
59146-96 Fits ’80-later FLT, FLHT, FLHS,<br />
FLHR, ’98-later FLTR and ’86-later<br />
FLSTC and FLSTN models.<br />
(Does not fit FLSTS.) $52.95<br />
C. CONCHO FOOTBOARD COVERS<br />
Heritage <strong>Softail</strong> Classic-inspired conchos make these<br />
covers look great whether footboards are up<br />
or down.<br />
50193-96 Fits Touring models with stock<br />
aluminium passenger footboards.<br />
Fits ’86-later FL <strong>Softail</strong> models<br />
equipped with P/Ns 50602-00,<br />
50955-00, 50602-89B and<br />
50955-97A; ’87-later FLT, FLHT,<br />
’94-later FLHR, and FLHRC;<br />
’98-later FLTR models. $64.95<br />
D. CONCHO FENDER SKIRT<br />
This decorative fender skirt features conchos inspired<br />
by the Heritage <strong>Softail</strong> Classic.<br />
59147-96 Fits ’80-later FLT, FLHT, FLHS,<br />
FLHR, ’98-later FLTR and ’86-later<br />
FLSTC and FLSTN models.<br />
(Does not fit FLSTS.) $49.95<br />
E. CHROME PASSENGER<br />
FOOTBOARD COVERS<br />
Easy installation using chrome hardware. (Shown<br />
with <strong>Softail</strong> Leather Tool Box, not available on Touring<br />
models.)<br />
50782-91 Fits Touring models with stock<br />
aluminium passenger footboards.<br />
Fits ’86-later FL <strong>Softail</strong> models<br />
equipped with P/Ns 50602-00,<br />
50955-00, 50602-89B and<br />
50955-97A; ’87-later FLT, FLHT,<br />
’94-later FLHR, and FLHRC;<br />
’98-later FLTR models. $57.95<br />
F. CHROME FRONT FENDER SKIRT<br />
This rigid-steel fender skirt, designed to replace the<br />
original factory-equipped aluminium trim, is formed,<br />
polished, and chrome-plated. Its ribbed pattern offers<br />
a unique styling element and adds rigidity. Subtle but<br />
distinctive brushed aluminium Bar & Shield logos are<br />
framed by a stamped-in ribbed outline on both sides.<br />
59228-91 Fits ’80-later FLT, FLHT,<br />
FLHS, FLHR, ’98-later FLTR and<br />
’86-later FLSTC and FLSTN<br />
models. (Does not fit FLSTS.) $45.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. V-LOGO PASSENGER FOOTBOARD COVERS B. V-LOGO FENDER SKIRT<br />
C. CONCHO FOOTBOARD COVERS D. CONCHO FENDER SKIRT<br />
E. CHROME PASSENGER FOOTBOARD COVERS<br />
F. CHROME FRONT FENDER SKIRT
G. ROAD KING CLASSIC FENDER SKIRT H. ROAD KING CLASSIC PASSENGER<br />
FOOTBOARD COVERS<br />
I. SKULL FRONT FENDER SKIRT J. FENDER TIP LENS KIT WITH SKULL LOGO<br />
K. BAR & SHIELD CHROME FENDER<br />
TIP LENS KIT<br />
315<br />
<strong>Softail</strong><br />
Fender Skirts and Tips<br />
G. ROAD KING CLASSIC FENDER SKIRT<br />
The latest in the family of Road King-inspired accessories,<br />
this chrome-plated steel fender skirt features<br />
four raised accent ribs and a die-cast Road King<br />
Classic medallion in chrome with black accents.<br />
Mounting hardware included.<br />
59005-98 Fits ’98-later FLHR, FLHRCI<br />
and FLHT models. $52.95<br />
H. ROAD KING CLASSIC<br />
PASSENGER FOOTBOARD COVERS<br />
The latest in the family of Road King Classic inspired<br />
accessories, this chrome-plated steel footboard cover<br />
features a chrome die-cast Road King Classic medallion<br />
with black accents and a stylish leather accent<br />
piece. Mounting hardware included.<br />
50246-00 Fits ’86-later FL <strong>Softail</strong> models<br />
equipped with <strong>Softail</strong> Passenger<br />
Footboard Kits P/Ns 50602-00, 50955-<br />
00, 50602-89B or 50955-97A; ’87-later<br />
FLT, FLHT; ’94-later FLHR and<br />
FLHRC; ’98-later FLTR models. $69.95<br />
I. SKULL FRONT FENDER SKIRT<br />
This decorative chrome-plated fender skirt is a direct<br />
replacement for stock fender skirt. Features a threedimensional<br />
sculptured concho with skull design set<br />
off with black accents. Mounting hardware included.<br />
59582-02 Fits ’80-later Touring models<br />
and ’86-later FLSTC and<br />
FLSTN models. $52.95<br />
J. FENDER TIP LENS KIT<br />
WITH SKULL LOGO<br />
This chrome-plated fender tip lens kit adds a little<br />
attitude to your ride. The kit features front and rear<br />
lenses with a translucent illuminated skull silhouette.<br />
The easy to install kit includes an amber front lens and<br />
red rear lens.<br />
59651-01 Fits ’80-later Electra Glide,<br />
Tour Glide, FLHS, Road King<br />
(except Road King Classic),<br />
and ’86-later FLSTC and<br />
FLSTN models. $23.95<br />
K. BAR & SHIELD CHROME<br />
FENDER TIP LENS KIT<br />
Chrome-plated polycarbonate construction features<br />
translucent Bar & Shield emblems. The kit includes<br />
front and rear lenses. Front lens features an amber Bar<br />
& Shield, rear lens features a red Bar & Shield. Quick<br />
and easy installation.<br />
59081-96 Front and Rear.<br />
Fits ’80-later FLHT, FLT,<br />
FLHS, FLHR models and ’86-later<br />
FLSTC, FLSTN models.<br />
(Does not fit FLSTS or FLTR.) $23.95<br />
L. FLAMES FENDER TIPS<br />
Made of durable ABS plastic. Includes mounting hardware<br />
and installation instructions.<br />
Fits ’80-later FLT, FLHR, FLSTC and FLSTN models<br />
(replaces front fender lamp assembly). (Does not fit<br />
FLSTS or FLTR.)<br />
59348-98 Front. $29.95<br />
59315-98 Rear. (not shown) $29.95<br />
L. FLAMES FENDER TIPS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
316<br />
<strong>Softail</strong><br />
Fender Tips<br />
A. HERITAGE SPRINGER FENDER TIPS<br />
These die-cast nostalgic fender tips feature an<br />
engraved Bar & Shield and brilliant chrome-plating,<br />
sure to enhance the appearance of your FLSTS coming<br />
and going. Looks great with Leather Mud Flaps<br />
with Fringe P/Ns 59027-99 (Black), 59027-98<br />
(Midnight Red), 59345-97 (Red), and 59346-97 (Blue).<br />
59218-97 Front.<br />
Fits ’97-later FLSTS models. $29.95<br />
59895-97 Rear. (not shown)<br />
Fits ’97-later FLSTS models. $29.95<br />
B. H-D CLASSIC FENDER TIPS<br />
Stock on Road King Classic models, these nostalgiclook<br />
fender tips are also available for other models.<br />
Replaces fender lamp assembly.<br />
Front fits ’80-later FL and FLHR models, and ’86later<br />
FLSTC models. Rear fits ’80-later FL and FLHR<br />
models, and ’86-’99 FLSTC models (except FLSTF<br />
and FLTR).<br />
59002-98 Front. $30.00<br />
59052-98 Rear. (not shown) $31.40<br />
C. V-WING FENDER TIPS<br />
Look great whether you’re coming or going. Includes<br />
mounting hardware.<br />
Fits ’80-later FLT, FLHR, FLSTC, and FLSTN models.<br />
(P/N 59333-97 replaces front fender lamp assembly<br />
and P/N 59334-97 replaces rear fender lamp assembly.)<br />
(Does not fit FLTR or FLSTS.)<br />
59333-97 Front. $29.95<br />
59334-97 Rear. (not shown) $29.95<br />
D. “LIVE TO RIDE” FENDER TIPS<br />
Made of durable ABS plastic. Includes mounting hardware<br />
and installation instructions.<br />
Fits ’80-later FLT, FLHR, FLSTC and FLSTN models<br />
(replaces fender lamp assembly). (Does not fit FLSTS<br />
and FLTR models.)<br />
Front Fender Tip<br />
59068-96 Chrome with Gold. $27.95<br />
Rear Fender Tips (not shown)<br />
59069-96 Chrome with Gold. $27.95<br />
59320-96 Chrome. $17.95<br />
E. FAT BOY EAGLE WING FENDER TRIM<br />
Classic Eagle Wing logo available in chrome or twotone<br />
chrome and gold with black accent. Matches<br />
Eagle Wing headlamp, taillamp and turn signal visors.<br />
Fits ’90-later FLSTF models.<br />
1. 59369-97 Rear. Gold two-tone. $29.95<br />
59368-97 Rear. Chrome. $19.95<br />
2. 59367-97 Front. Gold two-tone. $29.95<br />
59366-97 Front. Chrome. $19.95<br />
F. FAT BOY EAGLE FENDER TRIM<br />
Two-tone chrome and gold-plated. This solid brass<br />
rear fender trim is hand-polished. Features finely<br />
detailed Eagle and “<strong>Harley</strong>-Davidson” graphics.<br />
Includes mounting hardware and foam pad attached to<br />
underside of trim to resist scratches when installing.<br />
Fits ’90-later FLSTF models.<br />
1. 59285-90 Front. Chrome $19.95<br />
59318-96 Front. Gold two-tone $29.95<br />
2. 59286-90 Rear. Chrome $19.95<br />
59317-96 Rear. Gold two-tone $29.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HERITAGE SPRINGER FENDER TIPS B. H-D CLASSIC FENDER TIPS<br />
C. V-WING FENDER TIPS D. “LIVE TO RIDE” FENDER TIPS<br />
1<br />
2<br />
E. FAT BOY EAGLE WING FENDER TRIM<br />
1<br />
2<br />
F. FAT BOY EAGLE FENDER TRIM
G. TEARDROP FRONT FORK ROCKER COVERS<br />
H. FRONT FENDER RAILS AND<br />
STANCHION KIT<br />
I. HERITAGE SPRINGER CHROME<br />
BUMPER AND FIN KIT<br />
317<br />
<strong>Softail</strong><br />
Fender Rails<br />
G. TEARDROP FRONT<br />
FORK ROCKER COVERS<br />
Nostalgic chrome-plated styling that seems to be in<br />
constant motion. Easily installs on Heritage Springer<br />
without removing wheel. Patent applied for.<br />
43161-97 Fits ’97-later FLSTS models. $64.95<br />
H. FRONT FENDER RAILS*<br />
AND STANCHION KIT<br />
Chrome-plated accents straight from our 1947<br />
catalogue. Includes template for easy installation.<br />
Patent applied for.<br />
91117-97 Fits ’97-later FLSTS, ’84-later<br />
FLSTC, FLSTN, FLHT, ’94-later<br />
FLHR, FLHRC, ’98-later FLTR<br />
models and sidecar fenders. $69.95<br />
I. HERITAGE SPRINGER<br />
CHROME BUMPER AND FIN KIT*<br />
Styled after the Super Deluxe Bumper King from the<br />
1950’s H-D accessories catalogue. Constructed of<br />
lightweight aluminium fins, rails, and stanchions, and<br />
a steel bumper, all brilliantly chrome-plated.<br />
91235-97 Fits ’97-later FLSTS models. $225.00<br />
J. HERITAGE CHROME<br />
FRONT FENDER RAIL*<br />
A stylish re-creation of a popular Hydra Glide accessory<br />
direct from the <strong>Harley</strong>-Davidson 1959 accessories<br />
catalogue. Ornate, jet, twin-tube design<br />
sweeps smartly back along the front fender. Sparkling<br />
chrome-plating and years-ahead styling make it a hit<br />
for all Heritage and FLSTN owners.<br />
91080-93 Fits ’87-later FLST,<br />
FLSTC, and FLSTN models.<br />
(Does not fit FLSTS.) $91.95<br />
K. HERITAGE CHROME<br />
REAR FENDER RAIL*<br />
A perfect match to Heritage Chrome Front Fender Rail<br />
P/N 91080-93. Designed to fit with stock FLSTC,<br />
FLSTN saddlebags or Genuine <strong>Harley</strong>-Davidson Fat<br />
Boy leather saddlebags.<br />
91402-00 Fits ’00-later FLSTC models. $98.95<br />
91081-93 Fits ’87-’99 FLSTC, FLSTN<br />
models. (Does not fit FLSTS.) $91.95<br />
J. HERITAGE CHROME FRONT FENDER RAIL K. HERITAGE CHROME REAR FENDER RAIL Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
1 *WARNING:<br />
Fender rails are decorative items<br />
only. Do not strap anything to the rails. Adding<br />
any additional weight to the front fender could<br />
adversely affect vehicle handling, causing loss<br />
of control and death or serious injury.
318<br />
<strong>Softail</strong><br />
Engine Guards<br />
A. CHROME FRONT ENGINE GUARD KITS*<br />
49004-00 Fits ’00-later FLSTC, FLSTS<br />
and FLSTF models. $179.95<br />
49016-00 Fits ’00-later FXST, FXSTB,<br />
FXSTS and FXSTD models. $179.95<br />
49004-90 Fits ’86-’99 FLST,<br />
FLSTC, FLSTF, FLSTN<br />
and FLSTS models. $179.95<br />
49016-72D Fits ’84-’99 FXST, FXSTC,<br />
FXSTS, FXSTSB ’80-’86 FXWG,<br />
and ’72-’85 FX models (except<br />
models equipped with<br />
<strong>Harley</strong>-Davidson Extended<br />
Reach Forward Controls).<br />
(Does not fit FLSTS.) $179.95<br />
B. GLOSS BLACK ENGINE GUARD KIT*<br />
A serious finish for serious riders. Before a black powder<br />
coat, these engine guards get an extra layer of<br />
protection from an E-Coat dip. So go on and install<br />
Engine Guard Mount Footpegs, because this finish<br />
will go the distance.<br />
49023-02 Fits ’00-later FXSTS, FLSTS<br />
and FLSTF models. $169.95<br />
49024-02 Fits ’00-later FXST, FXSTB,<br />
FXSTS and FXSTD models. $149.95<br />
1<br />
*WARNING: These guards may provide limited<br />
leg and cosmetic vehicle protection under<br />
unique circumstances (fall over while stopped,<br />
very low speed slide). They are not made nor<br />
intended to provide protection from bodily injury<br />
in a collision with another vehicle or any other<br />
object.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME FRONT ENGINE GUARD KITS<br />
B. GLOSS BLACK ENGINE GUARD KIT
C. CHROME REAR SADDLEBAG GUARDS<br />
319<br />
<strong>Softail</strong><br />
Saddlebag Guards<br />
C. CHROME REAR SADDLEBAG GUARDS*<br />
Saddlebag guards provide a style borrowed from the<br />
past that makes a unique statement here and now.<br />
Includes mounting hardware and instructions.<br />
49261-00 Fits ’00-later <strong>Softail</strong> models<br />
except FXSTD, and FLSTF. ’00-later<br />
FLSTC models require Saddlebag<br />
Relocation Kit P/N 90238-00. $179.95<br />
49158-89D Fits ’86-’99 <strong>Softail</strong> models.<br />
(except FLSTF, FLSTN and<br />
FLSTS models). $174.95<br />
GLOSS BLACK REAR SADDLEBAG<br />
GUARD KIT (not shown)<br />
49269-02 Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD,<br />
FLSTF and FLSTS). ’00-later<br />
FLSTC models require Saddlebag<br />
Relocation Kit P/N 90238-00. $169.95<br />
D. HERITAGE SPRINGER<br />
REAR SADDLEBAG GUARD KIT*<br />
Inspired by the nostalgic look of the 50s, these classic<br />
looking dresser bars capture the magic of an era gone<br />
by. Take a ride back in time with these unique bars,<br />
styled by Willie G. exclusively for the Heritage Springer.<br />
Bars are entirely chrome-plated. Includes mounting<br />
hardware. Requires saddlebag bracket relocation kit.<br />
49258-00A Fits ’00-later FLSTS<br />
models. Requires the separate<br />
purchase of Saddlebag<br />
Relocation Kit P/N 90238-00. $179.95<br />
49225-97 Fits ’97-’99 FLSTS models. $179.95<br />
SADDLEBAG BRACKET RELOCATION KIT<br />
(not shown)<br />
Required for installation of FLSTS Rear Saddlebag<br />
Guards P/Ns 49258-00 and 49225-97 and FLSTC<br />
Rear Saddlebag Guard P/N 49261-00.<br />
90238-00 Fits ’00-later FLSTS models. $10.99<br />
90345-90A Fits ’97-’99 FLSTS models. $7.95<br />
D. HERITAGE SPRINGER REAR SADDLEBAG GUARD KIT Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
1<br />
*WARNING: These guards may provide limited<br />
leg and cosmetic vehicle protection under<br />
unique circumstances (fall over while stopped,<br />
very low speed slide). They are not made nor<br />
intended to provide protection from bodily injury<br />
in a collision with another vehicle or any other<br />
object.
320<br />
<strong>Softail</strong><br />
Braided Lines and Handlebar Kits<br />
A. FRONT STAINLESS STEEL<br />
BRAIDED BRAKE LINES<br />
Stylish stainless steel lines, with chrome-plated banjo<br />
ends, are custom fit to particular model applications.<br />
They meet all DOT requirements and include all<br />
necessary hardware. Kits for dual disc models consist<br />
of three brake lines with a chrome-plated junction tee,<br />
while single disc models consist of a single line.<br />
46011-01 Fits ’00-later FLSTC<br />
and FLSTF models. $61.95<br />
44813-00A Fits ’99-later FXST<br />
<strong>Softail</strong> Standard. $61.95<br />
44815-00A Fits ’00-later FXSTD<br />
models (except FXSTD2 ). $61.95<br />
45206-97B Fits ’84-’99 FXSTC and<br />
’93-later FXDWG models. $53.95<br />
45208-97B Fits ’88-later FXSTS models. $61.95<br />
45209-97B Fits ’95-’97 FXSTSB and<br />
’97-later FLSTS models. $61.95<br />
45210-97B Fits ’87-’99 FLSTC and ’90-later<br />
FLSTF, FLSTN models. $61.95<br />
45264-98B Fits ’99-later FXSTB. $61.95<br />
B. REAR STAINLESS STEEL<br />
BRAIDED BRAKE LINES<br />
Add extra shine to the rear of your <strong>Softail</strong> with a<br />
braided stainless steel brake line. It’s DOT approved,<br />
custom fitted, for <strong>Softail</strong> models, and includes all<br />
necessary hardware. Looks great when installed with<br />
a chrome swingarm.<br />
44803-00A Fits all ’00-later <strong>Softail</strong><br />
models (except FXSTD2 ). $88.95<br />
44802-99B Fits ’87-’99 FLSTC and<br />
’90-’99 FLSTF models. $53.95<br />
44803-99B Fits ’89-’99 FXSTC and<br />
FXSTS models, ’95 -’97 FXSTB<br />
models, and ’99 FXST and<br />
FXSTB models. $53.95<br />
C. BRAIDED STAINLESS STEEL<br />
FUEL CROSSOVER LINE<br />
A beautifully braided, stainless steel fuel line accented<br />
with highly-polished chrome fittings for your front fuel<br />
tank crossover. Innovative fittings are designed to<br />
eliminate unsightly hose clamps.<br />
63692-00A Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD). $29.95<br />
63694-00A Fits ’00-later FXSTD models. $29.95<br />
63696-00A Fits ’86-’99 <strong>Softail</strong> models. $34.95<br />
D. SCRIPTED HAND LEVER INSERT<br />
Let the citizens know what you are riding. These satinfinished<br />
Hand Lever Inserts allow you to personalise<br />
the controls to your individual model. The easy-toinstall<br />
inserts fit the slotted Custom Hand Control<br />
Levers P/N 45459-02 and 45533-02, and are the ideal<br />
complement to our Scripted Shift Linkages.<br />
Fit models equipped with Custom Hand Control<br />
Levers P/Ns 45533-02 and 45459-02.<br />
44529-02 “<strong>Softail</strong>” Script. (pair) $7.95<br />
44518-02 “Deuce” Script. (pair) $7.95<br />
44535-02 “Fat Boy” Script. (pair) $7.95<br />
44537-02 “Springer” Script. (pair) $7.95<br />
E. DRAG BAR KIT<br />
Get that custom cruiser look that only flat bars can<br />
provide. Kit includes the 6" tall chrome risers, straight<br />
handlebar, front turn signal brackets, and necessary<br />
cables.<br />
56434-98A Fits ’96-later FXST,<br />
FXSTC models. Handlebars<br />
and risers are stock on<br />
’98-later FXSTB models. $253.99<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. FRONT STAINLESS STEEL<br />
BRAIDED BRAKE LINES<br />
C. BRAIDED STAINLESS STEEL<br />
FUEL CROSSOVER LINE<br />
E. DRAG BAR KIT<br />
B. REAR STAINLESS STEEL<br />
BRAIDED BRAKE LINES<br />
D. SCRIPTED HAND LEVER INSERT
F. PULLBACK RISER AND HANDLEBAR KIT<br />
G. STAINLESS STEEL BRAIDED CLUTCH CABLE KIT AND THROTTLE & IDLE CONTROL CABLE KIT<br />
321<br />
<strong>Softail</strong><br />
Riser and Braided Cable Kits<br />
F. PULLBACK RISER AND HANDLEBAR KIT<br />
Add the big and beefy look of the <strong>Softail</strong> Deuce front<br />
end to your <strong>Softail</strong> with this riser and handlebar kit. Kit<br />
includes handlebar, risers, clutch cable, brake line,<br />
and all necessary hardware.<br />
56034-00 Fits ’00-later FX <strong>Softail</strong> models.<br />
Does not fit <strong>Softail</strong> models<br />
equipped with Springer front<br />
ends. Stock on FXSTD. $249.95<br />
G. STAINLESS STEEL BRAIDED<br />
CLUTCH CABLE KIT<br />
Go from stock to custom styling with this braided<br />
stainless steel clutch cable that delivers strength,<br />
durability and looks. A great-looking replacement for<br />
the Original Equipment black cable.<br />
38674-00 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTB/I) and ’99-later<br />
Dyna models (except FXDWG). $99.00<br />
Shown with:<br />
STAINLESS STEEL BRAIDED<br />
THROTTLE & IDLE CONTROL CABLE KIT<br />
Get custom looks and <strong>Harley</strong> toughness by upgrading<br />
your Original Equipment black cables to braided<br />
stainless steel.<br />
56344-00 Fits ’96-later <strong>Softail</strong> models<br />
(except FXSTB and FXSTS<br />
models) and ’99-later Dyna<br />
models (except FXDWG). $118.95<br />
H. BEACH BAR HANDLEBARS<br />
FOR HERITAGE CLASSIC MODELS<br />
These beefy 1-1/4" bars show off your FLSTC in<br />
style! These fat bars allow you to tuck the wires<br />
inside the bar for a clean, custom appearance, and<br />
the highly-polished and chrome-plated bar will get<br />
you noticed. The kit includes chrome handlebar<br />
clamp, risers, braided brakeline and all necessary<br />
mounting hardware.<br />
56364-02 Fits ’00-later FLSTC models.<br />
(Does not fit with <strong>Softail</strong><br />
Nacelle Kit P/N 67907-96.) $429.00<br />
H. BEACH BAR HANDLEBARS FOR HERITAGE CLASSIC MODELS Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
322<br />
<strong>Softail</strong><br />
Headlight and Passing Lamp Kits<br />
A. HALOGEN FOG LAMP KIT<br />
Create a new, distinctive look for the front end of your<br />
<strong>Softail</strong> with these auxiliary European-style Halogen<br />
Fog Lamps. Enjoy bright balanced light that complements<br />
your Halogen Headlight. Distinctive reflective<br />
inner domes add new character to your front end.<br />
Legal in all markets. A halogen fog lamp upgrade is<br />
available (P/N 68208-98, sold separately.)<br />
68278-02 Fits ’00-later FLSTF models.<br />
(FLSTC models are equipped<br />
with an Original Equipment<br />
Passing Lamp Kit.) $224.95<br />
68247-98 Fits ’86-’99 FLST, FLSTC,<br />
FLSTF and FLSTN models. $224.95<br />
NOTE: FLSTC models are equipped with an<br />
Original Equipment passing lamp kit. A halogen fog<br />
lamp upgrade is available (P/N 68208-98, sold<br />
separately) for ’86-later FLSTC models.<br />
Shown with:<br />
CHROME HEADLIGHT NACELLE<br />
If the chrome from this nacelle seems to reflect the<br />
image of 1960’s FL, that’s because the spirit of the<br />
past styling is built right in. Coupled with the separate<br />
purchase of the Chrome Nacelle Hardware Kit (P/N<br />
67897-96), it will work with existing H-D windshield<br />
and/or passing lamps. Includes hardware for installation<br />
of Nacelle with detachable windshield without<br />
passing lamp. Hardware kit is required when installing<br />
chrome Nacelle with passing lamps or rigid mount<br />
windshield.<br />
67907-96 Fits ’86-later FL <strong>Softail</strong> models<br />
(except FLSTS or FXSTS). $389.95<br />
Also shown with:<br />
CHROME NACELLE HARDWARE KIT<br />
This kit provides the additional hardware required to<br />
install the Chrome Headlight Nacelle P/N 67907-96 on<br />
FL <strong>Softail</strong> models that were previously equipped with<br />
passing lamps, rigid mounted windshields or<br />
detachable windshields.<br />
NOTE: This kit is not required when installing windshield<br />
P/Ns 58649-97A, 58651-97A, 58652-97A and<br />
58653-97A.<br />
67897-96A $45.95<br />
B. CHROME PASSING LAMP KIT<br />
Kit includes sealed beam auxiliary lights with chrome<br />
housings. Chrome mounting bracket incorporates<br />
tubular crossbar contoured to accent the headlamp.<br />
Kit is complete with all required wiring, toggle switch,<br />
and hardware.<br />
68277-02 Fits ’00-later FLSTF models<br />
(stock on FLSTC models). $199.95<br />
68249-86B Fits ’86-’99 FLST, FLSTC,<br />
FLSTF, and FLSTN models. Stock<br />
production on FLSTC Heritage<br />
<strong>Softail</strong> Classic models. $199.95<br />
C. SPRINGER PASSING LAMP KIT<br />
Redesigned chrome mounting bracket nicely accents<br />
Springer front end and offers a well-integrated, factory-installed<br />
appearance. Sealed beam auxiliary lamps<br />
feature chrome housings. Kit includes wiring, switch,<br />
hardware, and installation instructions. Designed to fit<br />
with or without Windshield Kit P/Ns 58044-88A,<br />
58029-89B, and Horn Kit P/N 69036-88A. Cannot be<br />
used with Handlebar Reservoir Cover Set P/Ns<br />
46098-98 or 46099-98.<br />
68253-88A Fits ’88-later FXSTS, ’95-’97 FXSTSB<br />
and <strong>Softail</strong> models equipped with<br />
Springer Front End Kit P/N 46007-88A.<br />
(Does not fit FLSTS.) $199.95<br />
Springer Fog Lamp Kit<br />
68248-98 Fits ’88-later FXSTS, ’95-’97<br />
FXSTSB and <strong>Softail</strong> models equipped<br />
with Springer Front End Kit P/N 46007-<br />
88A. (Does not fit FLSTS. Cannot be<br />
used with Handlebar Reservoir<br />
Cover Set P/Ns 46098-98<br />
or 46099-98.) (not shown) $224.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. HALOGEN FOG LAMP KIT SHOWN WITH CHROME HEADLIGHT NACELLE<br />
B. CHROME PASSING LAMP KIT<br />
C. SPRINGER PASSING LAMP KIT
D. TURN SIGNAL RELOCATION KIT FOR PASSING LAMPS<br />
E. AUXILIARY BRAKE LIGHT/TURN SIGNAL<br />
CONVERSION KIT – BULLET LENS<br />
E. AUXILIARY BRAKE LIGHT/TURN SIGNAL<br />
CONVERSION KIT – FLAT LENS<br />
Rear Directional Bar 13”<br />
Narrow Bar 10”<br />
323<br />
<strong>Softail</strong><br />
Relocation and Conversion Kits<br />
D. TURN SIGNAL RELOCATION<br />
KIT FOR PASSING LAMPS<br />
Easy to install, this kit relocates the turn signals from<br />
the handlebars to the passing lamp chrome mounting<br />
bracket. Provides a clean look to the front end of the<br />
motorcycle by removing wires and lights from the handlebar<br />
area. Kit includes turn signals for passing<br />
lamps, mounting bracket and all necessary hardware.<br />
Fits all U.S. <strong>Softail</strong> models equipped with H-D Passing<br />
Lamp Kits P/Ns 68247-98, or 68249-86B.<br />
68413-99 U.S.. $98.95<br />
68412-99 International. $98.95<br />
E. AUXILIARY BRAKE LIGHT/TURN<br />
SIGNAL CONVERSION KIT<br />
Turn signal module adds an auxiliary brake light function<br />
to your existing turn signals for auxiliary rear lighting.<br />
Easy to install, the kit simply plugs in to your existing<br />
wiring harness. Red turn signal lenses are included.<br />
DOT approved. Red lenses may not be legal in all<br />
countries. Check your local regulations.<br />
Bullet Lens Style<br />
68216-00 Fits ’00-later FXSTD models.<br />
(Does not fit with saddlebags.) $49.95<br />
91698-02 Fits ’02-later XL, Dyna (except<br />
FXDXT) and <strong>Softail</strong> (except<br />
FXSTD/I) models with stock<br />
bullet-style turn signals. $43.95<br />
Flat Lens Style<br />
91699-99A Fits all ’96-later <strong>Softail</strong> models<br />
and ’97-later FLHT, FLHR and<br />
FLTR models equipped with Original<br />
Equipment flat lens style turn signals.<br />
(Does not fit with Narrow Chrome<br />
Directional Bar P/N 68611-98.) $43.95<br />
F. LIGHTED CHROME DIRECTIONAL BAR<br />
Chrome-plated bar provides a custom look with complete<br />
integration. LED light pods provide auxiliary<br />
lighting for both brake and taillight. Patented.<br />
NOTE: Must only be used as auxiliary lighting.<br />
68143-98A Fits ’86-later FLST, FLSTC<br />
and FLSTN models; ’91-later<br />
FLT, FLHT, FLHS, FLHR, and<br />
’98-later FLTR models. Directional<br />
Lamps not included. $114.95<br />
G. CHROME REAR<br />
DIRECTIONAL MOUNTING BAR<br />
Rear directional mounting bar is cast from a very<br />
durable zinc-aluminium alloy, has been drilled and<br />
tapped for 5/16-inch mounting fasteners and is<br />
chrome-plated for a beautiful finish. (Lamp assemblies<br />
and mounting fasteners not included.)<br />
68510-74C Fits ’86-later FLST, FLSTC,<br />
FLSTN, and ’74-’84 FLH<br />
models. (Does not fit FLSTS.) $65.50<br />
Shown with:<br />
NARROW CHROME DIRECTIONAL BAR<br />
Enhance the rear profile of your <strong>Softail</strong> or Touring<br />
model with this Narrow Chrome Directional Bar that<br />
enhances the visual proportions of the bike. At 10<br />
inches wide, this die-cast, chrome-plated bar is 3<br />
inches shorter than the stock bar and features the<br />
same great quality.<br />
68611-98 Fits ’86-later FLST, FLSTC<br />
and FLSTN models and ’91-later<br />
Touring models. (Does not fit<br />
with Flat Lens Turn Signal<br />
Module P/N 91699-99A.) $45.95<br />
F. LIGHTED CHROME DIRECTIONAL BAR G. CHROME REAR DIRECTIONAL MOUNTING BAR Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
324<br />
<strong>Softail</strong><br />
Speedo/Tach Kits<br />
A. COMBINATION SPEEDOMETER/<br />
TACHOMETER<br />
Maintain the clean view over the handlebars. This<br />
unique combination Speedometer/Tachometer allows<br />
you to monitor engine speed without adding a handlebar-mounted<br />
tach. The unit mounts in the stock<br />
dash opening, and is a direct plug-in installation on<br />
’99 and later models. The backlit face aids night viewing,<br />
and the gauge features an easy-to-read LED<br />
odometer/tripmeter. Mileage reinstatement available<br />
through your dealer.<br />
3<br />
MPH Calibrated<br />
74460-03 Fits ’00-later FXSTD models. $419.95<br />
74461-03 Fits ’95-later FLHR models and ’00-later<br />
<strong>Softail</strong> models (except FXSTD). ’95-’98<br />
FLHR models require Speedo/Tach<br />
Retrofit Kit P/N 74468-03. $419.95<br />
74473-03 Fits ’96-’99 <strong>Softail</strong> models. ’95-’98<br />
<strong>Softail</strong> models require Speedo/Tach<br />
Retrofit Kit P/N 74468-03.<br />
KPH Calibrated<br />
$419.95<br />
74469-03 Fits ’00-later FXSTD models. $419.95<br />
74471-03 Fits ’95-later FLHR models and ’00-later<br />
<strong>Softail</strong> models (except FXSTD). ’95-’98<br />
FLHR models require Speedo/Tach<br />
Retrofit Kit P/N 74468-03. $419.95<br />
74475-03 Fits ’96-’99 <strong>Softail</strong> models. ’95-’98<br />
<strong>Softail</strong> models require Speedo/Tach<br />
Retrofit Kit P/N 74468-03. $419.95<br />
SPEEDOMETER/TACHOMETER<br />
INSTALLATION KIT (not shown)<br />
Allows the installation of the <strong>Harley</strong>-Davidson<br />
Combination Speedometer/Tachometer on older<br />
models.<br />
74468-03 Required to install<br />
Speedometer/Tachometer Kit<br />
on ’95-’98 FLHR, FXDWG,<br />
and ’96-’98 <strong>Softail</strong> models. $46.95<br />
B. BULLET STYLE TURN SIGNAL KIT<br />
Add a radical touch to your bike with these Bullet<br />
Style Turn Signals. Inspired by the <strong>Softail</strong> Deuce, this<br />
reflector-optic bullet turn signal kit gives your bike a<br />
whole new attitude. Kit includes housings, lenses, and<br />
supports. Stock on most ’02 models.<br />
68005-99 Fits ’00-’01 <strong>Softail</strong> models<br />
(except FLSTC), ’90-’01 Sportster<br />
models and ’91-’01 Dyna models.<br />
Will not fit with XL Saddlebags<br />
P/N 90342-98A or 90598-96B.<br />
(Stock on ’01 FXDX and FXDXT<br />
and ’00-later FXSTD.) $119.95<br />
68007-99 Fits ’88-’99 <strong>Softail</strong> models<br />
(except FLSTC). (Does not fit<br />
with detachables.) $127.95<br />
Bullet Style Turn Signal Kit – International<br />
68637-99 Fits ’00-’01 International <strong>Softail</strong><br />
models (except FLSTC),’90-’01<br />
International Sportster models and<br />
’91-’01 International Dyna models.<br />
Will not fit with XL Saddlebags<br />
P/N 90342-98A or 90598-96B.<br />
(Stock on ’01 FXDX and FXDXT<br />
and ’00-later FXSTD.) $119.95<br />
68690-99 Fits ’88-’99 HDI <strong>Softail</strong> models<br />
(except FLSTC). (Does not fit<br />
with detachables.) $127.95<br />
C. CHROME TURN SIGNAL<br />
SWIVEL ASSEMBLY KIT<br />
Add a subtle chrome detail to match your own chrome<br />
accessories with this swivel kit, a durable and stylish<br />
replacement for the stock zinc-plated swivel.<br />
68185-00 Fits ’88-later XL, FXR, Dyna and<br />
<strong>Softail</strong> models with handlebar<br />
mounted turn signals. $19.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
A. COMBINATION SPEEDOMETER/TACHOMETER<br />
B. BULLET STYLE TURN SIGNAL KIT<br />
C. CHROME TURN SIGNAL SWIVEL<br />
ASSEMBLY KIT
D. MINI TACH KIT, FL SOFTAIL<br />
F. MINI TACH KIT, SOFTAIL DEUCE<br />
AND SPRINGER<br />
E. MINI TACH KIT, SOFTAIL CUSTOM<br />
G. CHROME BILLET MINI TACH MOUNT<br />
AND HANDLEBAR CLAMP<br />
H. DEUCE MINI TACH MOUNT KIT I. CHROME BILLET MINI TACH<br />
MOUNT FOR SPRINGER MODELS<br />
325<br />
<strong>Softail</strong><br />
Mini Tach Kits<br />
MINI TACHS<br />
Add style and function with these chrome-plated,<br />
0-8,000 RPM mini tachometers. Measuring 2-5/8<br />
inches in diameter, these chrome-plated tachs boast<br />
superior illumination and high-quality construction.<br />
The hard-coated lens is both fog and scratch-resistant<br />
and is ultrasonically welded to the case, resulting in a<br />
strong, reliable seal.<br />
These tach kits deliver impressive accuracy and<br />
response. Our exclusive, balanced pointer design<br />
allows for a quick, precise needle sweep and minimal<br />
low idle flutter. Plus, reverse polarity and over-voltage<br />
protection ensures these quality tachs are immune to<br />
voltage surges, low-voltage interference and ignition<br />
coil inductive kick-back. Tested to the highest industry<br />
standards, each kit is specifically designed for<br />
each model, with styling that matches current<br />
speedometer graphics, including a lighted pointer.<br />
Complete wiring, hardware, chrome-plated bracket<br />
and installation instructions are included. (NOTE: Mini<br />
Tach Kits are not compatible with Windshield Bags.)<br />
D. MINI TACH KIT – FL SOFTAIL<br />
Installation on a FLSTC with the stock, rigid-mount<br />
windshield requires adjustment of the windshield for<br />
proper clearance between the tach and the windshield.<br />
’87-’99 FLSTC models require Windshield<br />
Bracket Kit P/N 58155-90 to regain the full-range of<br />
adjustment. (sold separately)<br />
67946-96A Fits ’93-later FXDWG and ’86-later<br />
FLST, FLSTC, FLSTF, FLSTN and FXSTB Night Train .<br />
NOTE: FL <strong>Softail</strong> models equipped with chrome<br />
Headlight Nacelle use P/N 67943-96A. $179.95<br />
E. MINI TACH KIT – SOFTAIL CUSTOM<br />
67948-96B Fits ’84-later FXST, FXSTC<br />
models, and ’99-later FXST <strong>Softail</strong> Standard.<br />
NOTE: P/N 67941-96B will fit FXSTD. $179.95<br />
F. MINI TACH KIT – SOFTAIL DEUCE<br />
AND SPRINGER<br />
67941-96B Fits ’00-later FXSTD (except FXSTD 2 ),<br />
’88-later FXSTS, FXSTSB, and FLSTS models.<br />
NOTE: Will not fit Springer models equipped<br />
with detachable windshields. $179.95<br />
G. CHROME BILLET MINI TACH<br />
MOUNT AND HANDLEBAR CLAMP<br />
Precision-machined chrome-plated aircraft quality<br />
aluminium mini tach mount incorporates a ball-milled<br />
handlebar clamp to add a custom touch to your <strong>Softail</strong><br />
or Dyna Wide Glide. (Mini Tach sold separately.)<br />
68960-98 Fits ’93-later FXDWG and ’86-later<br />
FLSTC, FLSTF, FLSTN and ’99-later FXSTB models<br />
with Mini-Tach P/N 67946-96A. (Does not fit with<br />
Street Stalker Headlamp Nacelle.) (Does not work with<br />
Windshield P/Ns 91820-85A, 57965-97A or ’00-later<br />
FLSTC models equipped with stock detachable<br />
windshield.) FLSTC models require Kit P/N 58155-90<br />
in order for stock windshield to fit. $124.95<br />
68962-98 Fits ’84-later FXST <strong>Softail</strong> models (except<br />
FXSTB) with Mini Tach P/N 67948-96A. $119.95<br />
NOTE: <strong>Softail</strong> models with Chrome Headlight Nacelle<br />
should use P/N 68961-98 Billet Mini Tach Mount and<br />
P/N 67943-96A Mini Tach Kit.<br />
H. DEUCE MINI TACH MOUNT KIT<br />
Complement the smooth flowing lines of the <strong>Softail</strong><br />
Deuce with this chrome Mini Tach Mount. Constructed<br />
from forged aluminium, this kit includes the curved<br />
handlebar risers and tach mount that functions as the<br />
handlebar clamp. All you need to do is add the appropriate<br />
Mini Tach (sold separately).<br />
68928-02 Fits ’00-later FXSTD models with 1" dia<br />
handlebars. $219.95<br />
I. CHROME BILLET MINI TACH MOUNT<br />
Precision-machined chrome-plated aircraft quality<br />
aluminium Mini Tach Mount incorporates a ball-milled<br />
design clamp to add a custom touch to your <strong>Softail</strong>.<br />
(Mini Tach is sold separately.)<br />
67848-00 Fits all FXSTS and FLSTS models,<br />
and ’00-later FXSTD models (except FXSTDSE).<br />
(Will not fit Springer models equipped with<br />
detachable windshields.) $155.95
326<br />
<strong>Softail</strong><br />
Wide Tyre and Sprocket Kits<br />
A. WIDE TYRE KIT – ’00-’02 MODELS<br />
Give your 2000 to 2002 <strong>Softail</strong> models that wide, solid<br />
look, while effectively increasing your contact patch to<br />
the road. Separate kits for both the FX and FL Model<br />
<strong>Softail</strong>s. All kits come with a 150 Dunlop series tyre<br />
(stock is 130), a machined and repositioned brake<br />
caliper, new splash guard, wheel spacer, and hardware<br />
to adapt most <strong>Softail</strong> accessories. Unique to the<br />
FX models are a redesigned tail lamp assembly plus<br />
model specific hardware. The FL package includes<br />
saddlebag hangers, saddlebag isolators and model<br />
specific mounting hardware as well. Designed to<br />
accommodate your stock or accessory <strong>Softail</strong> wheels<br />
and swingarms. Dealer installation is recommended.<br />
43685-00 Fits ’00-’02 FXST, FXSTS,<br />
and FXSTB models. (Does<br />
not fit FXSTD models.) $489.95<br />
44490-00 Fits ’00-’02 FLSTC, FLSTF,<br />
and FLSTS models. $489.95<br />
WIDE TYRE KIT – ’97-’99 MODELS<br />
Get a radical wide tyre look without sacrificing <strong>Harley</strong>-<br />
Davidson quality. This complete kit includes a Dunlop<br />
150-series tyre (stock tyre is 130), a new rear belt,<br />
chrome upper and lower belt guards and all necessary<br />
gaskets. This kit is fully compatible with your stock<br />
wheels and stock swingarm. No further modification<br />
required. Dealer installation is recommended. (Sold<br />
separately.) Choose from Black Narrow Sprocket P/N<br />
40391-98, or ThunderStar Narrow Sprocket P/N<br />
40336-99 to complete your installation.<br />
43684-99 Fits ’97-’99 FXSTC, FXSTS,<br />
FXSTB, FXSTSB, FLSTC and FLSTF<br />
models. (Does not fit ’00-later<br />
models or FLSTS models.) $499.95<br />
B. BLACK NARROW SPROCKET<br />
Narrow Sprocket for Wide Tyre Kit P/N 43684-99.<br />
Looks great with H-D Chrome Sprocket Cover P/N<br />
40317-94 (sold separately).<br />
65 Tooth<br />
40391-98 Fits ’97-’99 FXSTC, FXSTS,<br />
FXSTB, FXSTSB, FLSTC and<br />
FLSTF models. (Does not fit ’00<br />
models or FLSTS models.) $144.00<br />
C. THUNDERSTAR CHROMED<br />
BILLET SPROCKET<br />
Designed to match the awesome styling of the<br />
ThunderStar Wheel, these sprockets are manufactured<br />
from 6061-T6 forged billet aircraft aluminium,<br />
and precision-machined to exacting Original<br />
Equipment standards. Our sprockets are the only<br />
sprockets on the market that feature a proprietary<br />
process that combines the decorative chrome with<br />
wear-resistant surface applied to the chrome teeth.<br />
They are also chrome-plated with the same hexavalent<br />
process that matches chrome <strong>Harley</strong>-Davidson<br />
accessories. The sprockets come with a five-year<br />
warranty that applies to tooth wear only.<br />
40336-99 Narrow.<br />
Fits ’97-’99 <strong>Softail</strong> models<br />
equipped with Wide Tyre Kit<br />
P/N 43684-98B or 43684-99. $339.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. WIDE TYRE KIT<br />
B. BLACK NARROW SPROCKET<br />
C. THUNDERSTAR CHROMED<br />
BILLET SPROCKET
D. PROFILE LOW REAR SUSPENSION<br />
327<br />
<strong>Softail</strong><br />
Suspension and Tail Light Collar<br />
D. PROFILE LOW REAR SUSPENSION*<br />
This suspension lowers the seat height approximately<br />
1" (P/N 54588-94) or 3/4" (P/N 54648-00 and 54665-03)<br />
while preserving ride quality. Spring and damping rates<br />
tailored for <strong>Softail</strong> models to ensure a controlled ride.<br />
Shocks feature multi-staged damping to insure optimal<br />
performance under varying conditions. Kit includes a<br />
pair of rear shock absorbers and a <strong>Softail</strong> shock spring<br />
preload adjustment wrench. Compatible with Profile<br />
Low Front Suspension for FLSTC, FLSTF and FLSTN<br />
models only (P/N 54596-94).<br />
Chrome<br />
54648-00A Fits ’00-later <strong>Softail</strong><br />
models (except FXSTD). $349.00<br />
54588-94 Fits all ’89-’99 <strong>Softail</strong><br />
models, including ’97-’99<br />
FLSTS. (not shown) $299.95<br />
Black<br />
54665-03 Fits ’00-later <strong>Softail</strong> models<br />
(except FXSTD). $284.95<br />
E. PROFILE LOW FRONT SUSPENSION*<br />
Designed by H-D to lower the front fork approximately<br />
1" while preserving ride quality. Springs are progressively<br />
wound to allow a compliant, yet controlled<br />
ride. Kit includes two fork springs and a shorter jiffy<br />
stand to ensure proper jiffy stand operation.<br />
54596-94 Fits ’89-later FLSTC, FLSTF and<br />
FLSTN <strong>Softail</strong> models. (Does not fit<br />
FXST, FXSTB, FXSTC, FXSTD or<br />
Springer models.) Must only be<br />
installed on vehicles equipped with<br />
Profile Low Rear Suspension<br />
(P/Ns 54588-94 or 54648-00). $109.95<br />
F. CHROME TAIL LIGHT COLLAR<br />
This chrome-plated ABS tail light collar dramatically<br />
changes the appearance of your rear fender. The collar<br />
is easy to install, and the kit includes all mounting<br />
hardware. From the workshop of Wyatt Fuller.<br />
68311-01 Fits ’03-later XL,<br />
Dyna (except FXDWG),<br />
and FLSTF models. $28.95<br />
E. PROFILE LOW FRONT SUSPENSION F. CHROME TAIL LIGHT COLLAR Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
NEW<br />
1<br />
*WARNING: Installation of any accessory suspension<br />
components may affect cornering<br />
clearance and jiffy stand operation. This could<br />
distract the rider, causing loss of control and<br />
death or serious injury.
328<br />
<strong>Softail</strong><br />
Front End Kits<br />
A. CHROME FRONT<br />
END KIT – FL SOFTAIL<br />
A truly complete front end kit with the new improved<br />
internal valving components found on ’00-later models.<br />
Includes assembled chrome fork sliders, chrome upper<br />
fork covers, upper chrome triple tree, lower triple tree,<br />
bearings, installation hardware and fork oil to boot.<br />
46918-00 Fits ’00-later FLSTF<br />
and FLSTC models. $979.96<br />
46913-00 Fits ’86-’99 FLST, FLSTC,<br />
FLSTF and FLSTN models. $899.95<br />
B. CHROME FRONT<br />
END KIT – FX SOFTAIL<br />
You may not get there faster with chrome leading the<br />
way, but you’ll definitely get there in style. This complete<br />
kit includes chrome fork sliders, chrome billet<br />
fork dust shields, chrome upper fork nut caps, chrome<br />
drain screws, chrome acorn nuts and chrome triple<br />
trees. Fork sliders are assembled and include fork oil.<br />
Kit also includes upgraded fork damping springs and<br />
valves and triple tree tapered roller bearings, braces<br />
and dust shields.<br />
46224-00 Fits ’00-later FXST<br />
and FXSTB models. $995.95<br />
45765-00 Fits ’91-’99 FXST, FXSTC,<br />
and FXSTB models. $949.95<br />
C. SOFTAIL FRONT FORK<br />
SLIDER ASSEMBLY<br />
Developed for the rider who needs to replace a front<br />
fork assembly, this accessory comes with the chrome<br />
lower fork slider already assembled. Kit includes the<br />
fork assembly with fork oil installed, and also includes<br />
chrome drain screws, chrome axle retaining cap and<br />
chrome acorn nuts.<br />
1. FX <strong>Softail</strong><br />
46227-00 Lefthand.<br />
Fits all ’00-later FX <strong>Softail</strong><br />
models except FXSTD. $294.95<br />
46228-00 Righthand.<br />
Fits all ’00-later FX <strong>Softail</strong><br />
models except FXSTD. $294.95<br />
46916-01 Lefthand.<br />
Fits ’91-’99 FXST, FXSTC<br />
and FXSTB models. $294.95<br />
46917-01 Righthand.<br />
Fits ’91-’99 FXST, FXSTC<br />
and FXSTB models. $294.95<br />
2. FL <strong>Softail</strong><br />
46211-01 Lefthand.<br />
Fits ’00-later FLSTC,<br />
and FLSTF models. $294.95<br />
46212-01 Righthand.<br />
Fits ’00-later FLSTC,<br />
and FLSTF models. $294.95<br />
46914-00 Lefthand.<br />
Fits ’86-’99 FLST, FLSTC,<br />
FLSTF and FLSTN models. $294.95<br />
46915-00 Righthand.<br />
Fits ’86-’99 FLST, FLSTC,<br />
FLSTF and FLSTN models. $294.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. CHROME FRONT END KIT – FL SOFTAIL B. CHROME FRONT END KIT – FX SOFTAIL<br />
C. SOFTAIL FRONT FORK SLIDER ASSEMBLY<br />
1<br />
2
D. BLACK FRONT END KIT<br />
FOR FX SPRINGER<br />
F. WHEEL AND BRAKE KIT<br />
FOR FX SPRINGER<br />
E. CHROME FRONT END KIT FOR FX SPRINGER<br />
G. WHEEL AND BRAKE KIT<br />
FOR FX SPRINGER MODELS<br />
329<br />
<strong>Softail</strong><br />
Front End Kits<br />
D. BLACK FRONT END KIT<br />
FOR FX SPRINGER<br />
Feeling a little nostalgic for a Bad Boy ? Now you can<br />
put the blacked out Springer Front End on your<br />
<strong>Softail</strong>. It may not be coming off the assembly line<br />
anymore, but it’s finding its way back onto the street<br />
with this complete front end assembly.<br />
46196-00 Fits ’96-’99 <strong>Softail</strong> models.<br />
Results in 32 degree rake. Stock<br />
on ’96-’97 FXSTSB models. $2,299.00<br />
E. CHROME FRONT END KIT<br />
FOR FX SPRINGER<br />
This front end comes completely assembled from the<br />
<strong>Harley</strong>-Davidson factory, including all necessary hardware.<br />
Perfect for the do-it yourselfer who wants to<br />
rebuild their own <strong>Softail</strong> model using <strong>Harley</strong>-Davidson<br />
Genuine Motor Parts. Does not include wheel, axle,<br />
brakes or fender.<br />
46195-00 Fits ’00-later <strong>Softail</strong> models.<br />
Results in 32 degree rake angle.<br />
Stock on FXSTS models. $2,299.95<br />
F. WHEEL AND BRAKE KIT<br />
FOR FX SPRINGER<br />
This kit completes the look of your FX Springer Front<br />
End Kit. Kit includes the wheel, brake caliper assembly,<br />
brake rotor, front axle and necessary mounting hardware.<br />
(Shown with painted front fender, not included.)<br />
43849-00 Fits ’94-later FXSTS and<br />
FXSTB models. Requires separate<br />
purchase of Front End Kit<br />
P/Ns 46195-00 or 46196-00. $699.95<br />
G. WHEEL AND BRAKE KIT<br />
FOR FX SPRINGER MODELS<br />
This kit completes the look of your FX Springer Front<br />
End Kit. Kit includes the wheel, brake caliper assembly,<br />
brake rotor, front axle and necessary mounting hardware.<br />
(Shown with painted front fender, not included.)<br />
43849-00 Fits ’94-later FXSTS and<br />
FXSTB models. Requires separate<br />
purchase of Front End Kit<br />
P/Ns 46195-00 or 46196-00. $699.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
330<br />
<strong>Softail</strong><br />
Front End Kits<br />
A. SOFTAIL DEUCE<br />
CHROME FRONT END KIT<br />
Chroming your front end is easier than ever with this<br />
complete front end assembly kit. Stock on the <strong>Softail</strong><br />
Deuce with chrome lowers, this front end is assembled<br />
and chromed by <strong>Harley</strong>-Davidson, so you can be<br />
assured the best quality and fit without the hassle of<br />
worrisome exchanges. This complete assembly<br />
includes the chrome fork legs, triple trees with bearings,<br />
steering stem, dust shield and all necessary<br />
hardware and reflectors.<br />
45343-00 Fits ’00-later FXST, FXSTB<br />
and FXSTD models resulting in<br />
34 degree rake. Stock on FXSTD<br />
models. Requires separate<br />
purchase of FXSTD fender. $899.00<br />
B. SOFTAIL DEUCE WHEEL AND BRAKE KIT<br />
Complete the sleek look of the Deuce Chrome Front<br />
End Kit P/N 45343-00 with this package. Because it’s<br />
stock on ’00 FXSTD models, you can be certain of<br />
quality, style and fitment. Kit includes the wheel, brake<br />
caliper assembly, brake rotor, front axle and necessary<br />
mounting hardware.<br />
43597-00 Fits ’00-later FXST, FXSTB and<br />
FXSTD models with 34 degree frame<br />
rake. Stock on FXSTD models.<br />
Requires separate purchase<br />
of Front End Kit P/N 45343-00. $749.95<br />
C. FRONT END KIT FOR HERITAGE<br />
SOFTAIL CLASSIC AND FAT BOY MODELS<br />
Assembled by <strong>Harley</strong>-Davidson at the Final Assembly<br />
Plant in York, PA. This complete assembly features<br />
unparalleled quality and fitment at an affordable price.<br />
Assembly includes Original Equipment fork leg assemblies,<br />
triple trees with bearings, steering stem, dust<br />
shields and all necessary hardware and reflectors.<br />
45331-00 Fits ’00-later <strong>Softail</strong> models<br />
with four piston calipers.<br />
Results in 32 degree rake<br />
angle. Stock on ’00-later<br />
FLTSF and FLSTC models. $699.95<br />
D. WHEEL AND BRAKE KIT FOR<br />
HERITAGE SOFTAIL CLASSIC MODELS<br />
This kit completes the look of your Heritage <strong>Softail</strong><br />
Classic Front End Kit. Kit includes the wheel, four<br />
piston brake caliper assembly, brake rotor, front axle<br />
and necessary mounting hardware.<br />
44388-00 Fits ’00-later FLSTC models.<br />
Requires separate purchase of<br />
Front End Kit P/N 45331-00. $749.95<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. SOFTAIL DEUCE CHROME FRONT END KIT C. FRONT END KIT FOR HERITAGE SOFTAIL<br />
CLASSIC AND FAT BOY MODELS<br />
B. SOFTAIL DEUCE WHEEL AND BRAKE KIT<br />
D. WHEEL AND BRAKE KIT FOR<br />
HERITAGE SOFTAIL CLASSIC MODELS<br />
E. FRONT END KIT FOR SOFTAIL<br />
STANDARD AND NIGHT TRAIN MODELS<br />
F. WHEEL AND BRAKE KIT FOR FX SOFTAIL<br />
OR DYNA WIDE GLIDE MODELS<br />
G. FRONT END KIT FOR<br />
HERITAGE SPRINGER MODELS<br />
H. WHEEL AND BRAKE KIT FOR<br />
HERITAGE SPRINGER MODELS<br />
331<br />
<strong>Softail</strong><br />
Front End Kits<br />
E. FRONT END KIT FOR SOFTAIL<br />
STANDARD AND NIGHT TRAIN MODELS<br />
Assembled by <strong>Harley</strong>-Davidson at the Final Assembly<br />
Plant in York, PA. This complete assembly features<br />
unparalleled quality and fitment at an affordable price.<br />
Assembly includes Original Equipment fork leg assemblies,<br />
triple trees with bearings, steering stem, dust<br />
shields and all necessary hardware and reflectors.<br />
45332-00 Fits ’00-later <strong>Softail</strong> models<br />
with four piston calipers.<br />
Results in 34 degree rake<br />
angle. Stock on ’00-later<br />
FXST and FXSTB models. $689.95<br />
F. WHEEL AND BRAKE KIT FOR FX<br />
SOFTAIL OR DYNA WIDE GLIDE MODELS<br />
This kit completes the look of your FX <strong>Softail</strong> or Dyna<br />
Wide Glide Front End Kit. Kit includes the wheel, four<br />
piston brake caliper assembly, brake rotor, front axle<br />
and necessary mounting hardware.<br />
44389-00 Fits ’00-later FXST, FXSTB and<br />
FXDWG models. (Does not fit<br />
FX Springer or FXSTD models.)<br />
Requires separate purchase of<br />
Front End Kit P/Ns 45332-00<br />
or 45371-00. $599.95<br />
G. FRONT END KIT FOR<br />
HERITAGE SPRINGER MODELS<br />
The styling of the Heritage Springer has changed the<br />
motorcycling world. Now you can easily change your<br />
<strong>Softail</strong> to this classic look. This front end comes completely<br />
assembled from the <strong>Harley</strong>-Davidson factory,<br />
including all necessary hardware. Perfect for the do-ityourselfer<br />
who wants to rebuild their own <strong>Softail</strong><br />
model using <strong>Harley</strong>-Davidson Genuine Motor Parts.<br />
Does not include wheel, axle, brakes or fender.<br />
46194-00 Fits ’00-later <strong>Softail</strong> models.<br />
Results in 32 degree rake angle.<br />
Stock on FLSTS models. $2,499.95<br />
H. WHEEL AND BRAKE KIT FOR<br />
HERITAGE SPRINGER MODELS<br />
This kit completes the look of your Heritage Springer<br />
Front End Kit. Kit includes the wheel, brake caliper<br />
assembly, brake rotor, front axle and all necessary<br />
mounting hardware. (Shown with painted front fender,<br />
not included.)<br />
43848-00 Fits ’96-later FLSTS models.<br />
Requires separate purchase of<br />
Front End Kit P/N 46194-00. $899.00<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.
332<br />
<strong>Softail</strong><br />
Street Stalker and Front Fender Kits<br />
A. STREET STALKER HEADLAMP<br />
NACELLE AND FRONT FENDER KIT<br />
The unique custom styling of the Street Stalker front<br />
end is now available separately. A contoured twopiece<br />
design creates flowing lines and smooth curves<br />
that provide an original look. Available primed or<br />
painted, with a colour-matched nacelle and a colourmatched<br />
fender with complementary pinstriping.<br />
B. STREET STALKER FRONT FENDER KIT<br />
The smooth curves of the Street Stalker front fender<br />
easily create a clean, custom front end look. Made<br />
from high-impact, injection-moulded composite<br />
materials and available primed or colour-matched<br />
with complementary pinstripes. Includes mounting<br />
hardware.<br />
Fits ’86-later FLSTC and FLSTF models.<br />
C. BOBTAIL REAR FENDER<br />
CONVERSION KIT<br />
This Original Equipment style Bobtail Fender Kit<br />
allows you to convert your Fat Boy to the “Bobtail”<br />
look. The kit includes a primed fender, fender supports,<br />
and all necessary hardware.<br />
59657-03 Fits ’03-FLSTF models.<br />
Stock on FXST, FXSTS,<br />
and FXSTB models. $199.95<br />
Refer to the Colour Shop section for<br />
a complete listing of colour options.<br />
Notice: The prices appearing in this catalogue are the<br />
manufacturer’s suggested retail prices. Actual retail<br />
prices may vary.<br />
A. STREET STALKER HEADLAMP NACELLE AND FRONT FENDER KIT<br />
B. FL SOFTAIL CLEAN FRONT FENDER<br />
NEW<br />
C. BOBTAIL REAR FENDER<br />
CONVERSION KIT
Chrome Headbolt Bridge Kit<br />
43858-00, page 562<br />
New for 2003—Wide Beach Handlebar<br />
56364-02, page 599<br />
<strong>Softail</strong><br />
Multi-fit parts & accessories<br />
Just because you’ve reached the end of<br />
the <strong>Softail</strong> section doesn’t mean you’re<br />
out of custom options. We’ve got Screamin’<br />
Eagle Performance Parts that can build your<br />
bike’s horsepower and torque, plus a ton of<br />
additional custom possibilities in the Multi-Fit<br />
section of this catalogue. There, you’ll find<br />
the Chrome Bolt Covers and other subtle<br />
details that stand out as telltale signs of a true<br />
custom. And you’ll discover stunning new<br />
accessories<br />
333<br />
Screamin’ Eagle II+<br />
Mufflers with End<br />
Caps – Race Application<br />
Only 80220-02, page 502<br />
like our Wide Beach Handlebar, built to accommodate<br />
internal wiring for a clean, uncluttered<br />
custom look—especially with the addition<br />
of chrome controls. So before you call it a day,<br />
check out Multi-Fit for <strong>Softail</strong> solutions.