You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Service EquipmentReplacement Pin for Kits<strong>Key</strong> <strong>Systems</strong>Cylinder Tool Kit No. CT-93Kit No. CT-93 contains the following items (also available separately):CT-4 Follower for 509" diameter plugsCT-11 <strong>Key</strong> gauge for <strong>Corbin</strong> ® X and Z Class System 70 and pre-System 70CT-19 TweezersCT-21 <strong>Key</strong> gauge for <strong>Russwin</strong> ® N Class System 70 and pre-System 70CT-22 <strong>Key</strong> gauge for <strong>Russwin</strong> DH Class System 70 and pre-System 70CT-23 <strong>Key</strong> gauge for <strong>Russwin</strong> 981 and 852 ClassesCT-26 Waldes Tru-Arc pliers (see below for full description)CT-54 Follower for .552" diameter plugsPyramid ToolsCT-20 Pyramid plug follower (.495" diameter)CT-20K <strong>Key</strong> Gauge for PyramidOther ToolsCT-5 Pin Chamber ReamerCT-7 Pin Chamber Burring ToolCT-10Loading tool for CK4400 Series and IC cylinder shellsCylinder Installation Wrench No. CT-80CT-80 is for interchangeable core mortise cylinders. It is used to:• Install and remove <strong>Corbin</strong> <strong>Russwin</strong> interchangeable core mortisecylinder housing without marring cylinder scalp finish.• Test cam operation before fastening the mortise cylinder set screw.• Align the pins of the throw member before installing the core.CT-80Waldes Tru-Arc PliersNo. CT-25When rekeying or exchanging cylindersin CK4200 and UT5200 Series knobs,this tool is used to remove the large knobshank retaining ring to gain access to thecylinder.No. CT-26When rekeying CK4200 and UT5200Series cylinders, this tool is used to removethe plug retainer.No. CT-27When rekeying or exchanging cylindersin UT5200 Series Unit Lock lever handles,this tool removes and installs the cylinderretaining ring.45078-3/14<strong>Key</strong> <strong>Systems</strong>.47
Change language