Operating Instructions GEORG FISCHER +GF+ ... - Orbitechnik.com

More documents

Recommendations

Info

The following materials can be used: º steel, black or galvanised º chrome and stainless steel (up to 2.5 mm wall thickness) º aluminium º non-ferrous metals (e.g. copper, brass) º plastics (PE, PP, PVDE, PVC) Other materials on request. Do not use cast pipes with glass-hard surfaces (GG). 6 GEORG FISCHER +GF+¹
4 Technical specifications Manufacturer Georg Fischer Rohrverbindungstechnik GmbH D-78224 Singen Dimensions 300 x 450 x 300 mm Weight (incl. vise) 34 kg Power 550 W Protection class Totally insulated in accordance with Class II DIN VDE 0740 Speed 180 rpm Versions 1-phase AC 110 ... 120 V, 50/60 Hz 230 ... 240 V, 50/60 Hz Sound pressure level at the workplace at idle: approx. 82 dB (A) under load: approx. 84 dB (A) As the noise level may also exceed 84 dB (A) under unfavourable operating conditions, we recommend the use of suitable ear protection when the machine is used for extended periods. The sound pressure level was measured under normal operating conditions in accordance with EN 23741. Vibration level in accordance with EN 28662, Part 1 < 2.5 m/s 2 GEORG FISCHER +GF+ 7
Page 1 and 2: Operating Instructions Code 790 044
Page 3 and 4: Table of Contents GEORG FISCHER +GF
Page 5 and 6: 0 About these operating instruction
Page 7 and 8: Working with safety in mind "Make y
Page 9: 3 Features and scope of application
Page 13 and 14: 5.2 Transporting and assembling the
Page 15 and 16: Fitting the saw blade 5 Fitting the
Page 17 and 18: 6.3 Adjusting the additional cutter
Page 19 and 20: GEORG FISCHER +GF+ �Tighten the c
Page 21 and 22: 1 2 11/2 11/4 2 For non-stop operat
Page 23 and 24: 1 2 11/2 11/4 For non-stop operatio
Page 25 and 26: Interval after the first 150 hours
Page 27 and 28: Service / after-sales service Spare

Operating Instructions GEORG FISCHER +GF+ ... - Orbitechnik.com

Create successful ePaper yourself

Delete template?

Save as template?