Our main goal is: ”Quality Procedures and Outstanding ... - GTT

Recommendations

Info

Page 2 GT Tækni ltd. GT TÆKNI LTD. - GRUNDARTANGA GT Tækni ltd., Grundartanga, 301 Akranes www.gtt.is gtt@gtt.is 431 3500 The beginning GT Tækni ltd. was founded from the core of the Technical department of Icelandic Alloys ltd. in April 2002 with 25 employees. The foundation was a result of an outsourcing process within Icelandic Alloys ltd. and its Parent Company, ELKEM ASA. The service that GT Tækni provides today is with in maintenance, production and spare parts handling, sales, purchasing and projects. The service can be divided into three main departments; Mechanical, Electrical and Sales and Spare Part Stock. Since the startup day a lot of water has passed under the bridge. Late in 2004 the number of employees was well over 40 all having extensive practice in Plant maintenance. The service of GT Tækni is very broad • Maintenance and repair service within mechanical-, vehicle- and electrical field • New constructions, renewal and implementing mechanical and electrical equipments • Production of electrode mantel and high pressure hoses TABLE OF CONTENT The beginning 1 The service within GT Tækni is very broad 1 Mechanical department 2 Electrical department 2 Special knowledge 3 Material sale and stock 3 Over seas co-operation 4 Where are we? 5 Company information GT Tækni ltd.. 6 • Material sale and Spare Part stock • Technical service in the Hvalfjördur tunnel • Preventive maintenance and inspections routines on mechanical and electrical equipments • Plant maintenance Assembling a rubber conveyer belt Within the mechanical department our employees have very good knowledge in Crushing and Screening equipments, Transport equipments, Hydraulic Systems and in General Plant Maintenance
GT Tækni ltd. Mechanical department The mechanical department is divided into four areas. Mechanical work shop, Metal work shop, Vehicle work shop and Production area where metal electrode casing for Icelandic Alloys are produced. The area that GT Tækni has for the mechanical department is a hall of 1.000 m2 and 10 m height. There are four large doors high. There are two overhead cranes of 5 tons each and one 16 tons lift in the Vehicle workshop. The workshops are well equipped for all mechanical and electrical work and maintenance. Production In our production line the Company produces annually 1.000 pcs of metal electrode casings. The dimension of each casing is 2m in height and Electrical department The Electrical department is divided into two areas, the Electric shop and the Electronic shop. The area that GT Tækni has for the electrical department is approximately 115 m2. The Electric shop is equipped with 1 tons overhead crane and a large door. The workshops are well equipped for all electrical work high or low voltages, electronic work and maintenance. The electrical department has license to operate in general electrical work (B-license) and in the high voltage electrical work (A- license). The electrical 1,8 m in diameter. Page 3 Working on productin of electrode casing for Icelandic Alloys In our Vehicle shop nothing is impossible. Repair of cars, fork lifts, trucks and everything on wheels or belts from bicycles to over 40 tons container truck lift. We have special knowledge in hydraulic systems in stocking cars. The stoking cars are rebuilt in our Vehicle shop so they can take the load when stoking in extreme hot environment in the FeSi furnaces. In the Vehicle shop there long experience in servicing : Hyster – Caterpillar – Kalmar – Case – Still - Volvo – Komatzu – Brokk – Clark department also has the responsibility and licenses for all electrical equipments in the Hvalfjördur tunnel. The electrical department handles all general repair and maintenance as well as renewal and rebuilding of electrical equipments. The electrical department serves the whole electrical spectrum within the heavy industry, from the low voltages to the extreme high voltage end of the industry. In the electrical department there is much experience in working with: ASEA – Siemens – and ABB high voltage equipments – PLC- A and B license
Page 1: Our main goal is: ”Quality Proced
Page 5 and 6: GT Tækni ltd. Over seas co-operati
Page 7 and 8: GT Tækni ltd. Company information

Our main goal is: ”Quality Procedures and Outstanding ... - GTT

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?