edited p005-009 - Our Site is Under Construction

North American Maintenance Supply LLC.www.northamericanmaintenancesupply.comC25 SERIES RIM EXIT DEVICESThe Falcon 25-R Series rim device meets the demanding requirements of high trafficinstallations with a single-point, rim type latch & a streamlined touch bar design.This device can also be electrified for maximum ease of use and accessibility.Hand: Non-handed.Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);US32 (629); US32D (630); US28 (628), 313AN.Strikes: 299 strike standard.Latchbolt: Stainless steel, 3/4" throw.Deadlocking Latchbolt: Standard.Dogging Feature: 1/2 turn hex dogging standard. No threaded parts to wear out.Cylinder Dogging: Specify “CD” prefix. Uses 1-1/8' long mortise cylinder withstandard cam.Stock Sizes: 3'. Cut to size in the field.Doors: 1-3/4" thick, wood or metal.Projection: 2 3/4" maximum, 2” dogged.Mounting Height: 40 1/4" from CL to finished floor.Fasteners: All mounting screws are concealed, sheet metal screws and machinescrews standard.Sex Bolts: Recommended when device is used with hollow core wood, compositeor light gauge hollow metal doors. For EO device, specify 8 - 2729 (#I0-24) SNB.For devices with trim, specify 4 - 2729 (#IO-24) SNB.ANS I: Certified ANSI A156.3-2001 Grade 1 standards.Center Case & Working Parts: Center case is heavy wrought & sintered metal parts.Shim Kit: For glass lite applications; 1/4" thick, specify SK25-RM.FA25-R-EO-US28 Aluminum Finish 781.00FA25-R-EO-313AN Anodized Duranodic 830.0024 SERIES NARROW STILE RIM EXIT DEVICES25-V SERIES VERTICAL ROD EXIT DEVICESHigh-traffic applications demand the added strength and protection that comes witha vertical rod device. The Falcon 25-V Series delivers with a surface-applied designthat includes standard top latch and deadlocking. The sleek touch bar designensures an attractive installation.Hand: Field reversible.Finishes: Same as for rim devices.Strikes: 3788 top strike is surface applied.2130 bottom strike is mortised into floor.Angle Bracket: Use 4215 angle bracket in flush transominstallations. Allows use of standard 3788 strike.Latchbolt: Top stainless steel 3/4' throw. Bottom bolt, 1/2"throw.Deadlocking Latchbolt: Standard in top latch.Latch Retention Hold: Standard with top latch.Dogging Feature: 1/2 turn hex dogging standard. No threadedparts to wear out.Cylinder Dogging: Specify “CD” prefix. Uses 11/8' long mortisecylinder with standard cam.Stock Sizes: 3'.Doors: 1 3/4' thick wood or metal.Projection: 2 3/4" maximum, 2" dogged.Fasteners: All mounting screws are concealed, sheet metalscrews standard, machine screws available, specify AMS.Sex Bolts: Recommended when device is used with hollowcore wood, composite or light gauge hollow metal doors. ForEO device, specify 12 - 2729 (#10-24) SNB. For devices withtrim, specify 8 - 2729 (#10-24) SNB.ANSI: Certified ANSI A156.3-2001 Grade 1 standards.25-V: Latch Retention (LR) top latch and bottom square bolt.3788 strike top, 2130 flush strike bottom.Vertical Rods: Furnished to length based on a 401/4" horizontalCL from finished floor and a 7’0" door standard. Variationsfrom these standards must be specified when ordering.25-V-LBR: Less bottom rod vertical device.Shim Kit: For glass lite applications; 1/4” thick, specify SK25-V.FA25-V-EO-US28 Aluminum Finish 1106.00FA25-V-EO-313AN Anodized Duranodic 1175.0024 SERIES NARROW STILE VERTICAL ROD EXIT DEVICESSpecs same as 25 exc.:Stile: 1 3/4" minimum when used in pairs.Shim Kit: For glass lite applications, 1/4" thick, specify SK24-V.Specs same as 25 exc.:Deadlocking Latch: Optional. Specify "DL" prefix.Fasteners: All mounting screws are concealed.Sex Bolts: Recommended when device is used with hollow core wood, compositeor light gauge hollow metal doors. For EO device, specify 4 - 2729 (10-24)SNB an2 - 4122 (1/4-20)SNB. For devices with trim, specify 4 - 2729 (10-24)SNB.Center Case & Working Parts: Wrought steel with heavy wrought and sintered metalparts.Shim Kit: For glass lite applications, 1/4" thick, specify SK24-R.FA24-R-EO-US28 Aluminum Finish 911.00FA24-R-EO-313AN Anodized Duranodic 968.001.800.604.1922FA24-V-EO-US28 Aluminum Finish 1196.00FA24-V-EO-313AN Anodized Duranodic 1270.00181