edited p005-009 - Our Site is Under Construction

www.northamericanmaintenancesupply.comANorth American Accredited Maintenance Lock Supply LLC.BALL BEARING FULL MORTISETEMPLATE HINGEThese hinges fit snugly and trimly in wood or hollowmetal doors with pressed metal or wood jambs. Hingesare loose pin and are fully swaged for smooth operationand long life. Ball bearing hinges provide smoothestoperation even under heavy service conditions.Hinges are packed with all machine screws and halfwood screws. Type FF-H-116A4 1/2" x 4 1/2"PAB1279PC4H Prime Coat Grey Finish 12.28/prPAB1279DCH4H Dull Chrome Plated 18.45/prPLAIN BEARING FULL MORTISETEMPLATE HINGEThese hinges fit snugly and trimly in wood or hollowmetal doors with pressed metal or wood jambs. Hingesare loose pin and are fully swaged for smooth operationand long life. Hinges are packed with all machinescrews and half wood screws.Type FF-H-116A4 1/2" x 4 1/2"PA1279PC4H Prime Coat Grey Finish 11.17/prPA1279DCH4H Dull Chrome Plated 14.89/prDOOR CLOSER HINGESListed by UL for use on labeled fire doors. These hingesuse a dependable coil spring design and fit into astandard 4 1/2" x 4 1/2" mortise template. May be usedwith ball bearing hinges on the same door. An antifrictionbearing handles both vertical and horizontalloading, and the spring meets the toughest requirements.Spring tension is adjustable andcan be changedbefore or after installation. The hinge is torque adjustable,using a setscrew, for closing speed and comeswith a wrench, adjusting pin and directions. Hinges arepacked with all machine screws and half wood screws.SINGLE ACTION SPRING HINGESThese single action spring hinges work well to close residential and commercialdoors, and are adjustable. The half-surface version 2019 with a mortise jamb leaf of4 1/2" and a surface door leaf of 5 1/2", fitting standard dimension templates, whilethe 2020-6 and 2020-7 are non-template styles that mount flat to the door, and aremortised into the job.HALF SURFACE TEMPLATE PRIME COAT4 1/2" Mortise Jamb Leaf; 5 1/2" Sufrace Door LeafPA201935 913591 /prHALF SURFACE NON-TEMPLATE PRIMECOATPA20206 6" 36.92/prPA20207 7" 56.56/prSINGLE ACTION SPRING HINGEN.Y.C. HOUSING AUTHORITY APPROVEDThe 2029 series hinges provide tamper resistant spring actionto suit N.Y.C. Housing Authority requirements. To meet thoserequirements, the top button on the hinge is not removable, sothat the spring cannot be removed or tampered with.Non-Template, Prime CoatPA2029C6 6" 24.25/prPA2029TH6 6" NYCHA Approved 25.01/prDOUBLE ACTION SPRING HINGESPAUL1278PC Spring Hinge Top Adj. Prime Coat 40.18/eaPAUL1278DCH Spring Hinge Top Adj. Dull Chrome Plated 44.64/eaHALF SURFACE HINGEHalf surface template hinges mount on thesurface of the door, and are mortised into thejamb. They work well in applications wherethe door has a normal hinge bearing surfacetheedge-that won't hold screws. These halfmortisetemplate hinges fit applicable, matchingtemplate-guided recesses in the jamb.Double acting spring hinges give closing action from either direction. Energy isstored in the spring as the door is opened, and closed the door as it is released.Spring tension is adjustable at any time. Models are available for doors with andwithout hanging strips, and sizes are made to operate door weights, per pair, from25 lbs.-70 lbs., in thicknesses franging from 3/4" to 1 3/4" (not all thicknesses workwith all models).PAB1138PC4HN33 02 /pr334 1/2"PA070SPB3 Light/Medium Duty 3" Sprayed Brass 22.99/prPA070SPB4 Medium Duty 4" Sprayed Brass 26.44/prPA070SPB5 Medium/Heavy Duty 5" Sprayed Brass 37.94/prPA070SPB6 Heavy Duty 6" Sprayed Brass 59.14/pr550